Used Rahsol Torque Wrench for sale (2,856)

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70294 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Tedpfx Aaoz D Aqushjc Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: excellent (used), functionality: fully functional, power: 110.32 kW (149.99 HP), first registration: 11/2021, fuel type: diesel, fuel: diesel, driver cabin: day cab, operating hours: 172 h, Equipment: air conditioning, all wheel drive, car registration, 1352T BOKI MUNICIPAL VEHICLE 1352T Length x Width x Height – 5,070 x 1,700 x 2,190 mm (excl. mirrors) Wheelbase 2,400 mm / 990 mm Tank volume: Diesel 50 liters, AdBlue 25 liters, hydraulic oil 50 liters Additional equipment affects unladen weight, payload, and dimensions Engine FPT F1C 1152, EU 6C, 110kW (standard) FPT, type F1C, 2,998 cm³, 4-cylinder diesel engine 110 kW / 150 HP at 3,000 rpm. Torque: 370 Nm at 1,320 rpm. Emission standard Euro 6C (Stage V in vehicle documents) Steering (standard) Hydraulically steered front axle with up to 40° steering angle Left-hand drive Third axle forced steering and can be lifted Tjdpfxezf Eh Uo Aahsc Hydraulic Load-Sensing 2-circuit system Load-Sensing variable displacement pump with 2 hydraulic circuits (LUDV) Independently switchable electrically Proportional adjustment Nominal flow rate: max. 80 l/min per circuit Total flow rate: 135 l/min at 3000 1/min, max. 200 or 300 bar, manually switchable Two pressure and tank lines at the front and rear, including return flow filter With drip-free flat-face quick couplings Including leak oil line at the front and rear With separate filtration Including 2 oil flow regulators Floating position for double-acting control valve Floating position for 1 double-acting control valve at the front Double-acting control valve at the front 1 double-acting valve with 2 drip-free flat-face quick couplings at the front Operation via buttons on the joystick Air conditioning Air conditioning integrated into the vehicle's heating and ventilation system Vehicle height remains unchanged Control panel holder Control panel holder for spreader control unit Exterior mirrors adjustable and heated Electrically adjustable and heated exterior mirrors Accelerated lifting and lowering, fixed mounting plate Accelerates the lifting and lowering of attachments with their own hydraulic system Used with attachments with a high flow rate at the control function. Only in combination with: FPT engine, LS hydraulics, fixed mounting plate DIN 76060-B Rear connections offset for roll-off systems Hydraulic connections on the bulkhead placed to the outside, to allow collision-free mounting of roll-off systems Preparation for tipper cylinder Preparation of the vehicle for the later installation of a tipper cylinder, Electrical connections prepared, hydraulic connection prepared With the following additional equipment: Central lubrication system vehicle Consisting of the required lubricant distributors, Connection fittings at the lubrication points and the Distributors, as well as the lubricant lines: Front axle 10 lubrication points Rear axle 14 lubrication points Total 24 lubrication points ILC MINI MAX 12V 1.0 kg R, CT, PE Stirring impeller Control with: Operating pressure: 200 bar Speed: 22 rpm Container: 1.0 kg Grease follower lid: No Stirring impeller: Yes Low level indicator: No Outlet/number: G1/4" / 2; M10x1.8" Pump element with: Cable: Yes Clamping: Bayonet 7-pin Voltage: 12 V Connection: M12x1 IP67 Without attachments. Suitable attachments can be purchased separately: Vario snowplow HUMMEL LF-D 2700 - €7,500.00 net Roll-off tipper AR-L55-2 new - €17,500.00 net Spreader or wet salt spreader available at an additional price. Subject to changes, printing errors, mistakes, and prior sale. All information is provided without warranty. The sale takes place with the exclusion of any guarantee or warranty.

Condition: ready for operation (used), Year of construction: 2009, Seiger SLZ 1000 cycle lathe year of construction 2009 center distance 3000mm Circulation over bed 1010 Circulation over facing slide 650 Drive at 100% ED 37KW at 60/ ED 52KW max. torque approx. 9000NM Speed 5-900rpm X Feed force max 240000N Z feed force max 16000N Control Heidenhain Manual Turn Tsdeu T Dryjpfx Aahsc with faceplate and steady rest The offer is aimed exclusively at traders within the meaning of §14 BGB

Condition: used, mileage: 76,480 km, power: 140 kW (190.35 HP), first registration: 06/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,932 mm, total width: 2,020 mm, total height: 2,785 mm, loading space volume: 13 m³, loading space length: 3,495 mm, loading space width: 1,771 mm, loading space height: 1,959 mm, Year of construction: 2022, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, - Internal No. 67.66 - Dimensions, passenger/cargo area: Length to driver's seat 3,479 mm x Length to partition 2,186 mm x Width 1,778 mm x Height 1,967 mm Tsdpfxjzkxf Dj Aahoc - Sortimo workshop van equipment, left and right, extra charge 1,000 € - All-wheel drive 4x4 with Torque-on-Demand - Transmission: 9G-TRONIC - Climate control: Tempmatic - MBUX multimedia system with 7-inch touchscreen - Navigation with voice control, Apple CarPlay and Android Auto - Package: Parking package with reversing camera - Radio: Digital radio DAB - Spare wheel, off-road version - Spare wheel holder with jack - Off-road version - Thermal insulation, driver's cabin - Thermal insulation, cargo area - Auxiliary heater (hot water), programmable and with remote control - WET WIPER SYSTEM - Seat heating, driver's side - Seat heating, passenger side - Seats: Pre-wiring for seat configuration 3/-/ - Seat: Lumbar support, passenger seat, electric - Seat: Lumbar support, driver's seat, electric - Comfort driver's seat - Comfort headrest, driver's side - Comfort passenger seat - Rain sensor - Package: Acoustic package - Package: Charging package, instrument panel - Tires: All-season tires - Rear door, double-wing opening, with side wall - Seats: 3-seater bench, 1st row - Cruise control - Partition, continuous to the C-pillar - Wooden floor in the passenger/cargo area - Tinted glass in the rear, black - Rails for roof rack - ATTENTION ASSIST - Axle ratio i = 3.923 - Airbag, passenger side - Step, rear door - Exterior mirrors, electrically foldable - Battery: AGM battery 12 V / 92 Ah - Turn signal lights, side, front - Exterior mirrors without turn signal - Heated windshield with band filter on the front - Warm air duct to the passenger compartment - Pre-wiring, electrical system, parametric special module - Adjustable loading area up to the railing, in conjunction with partition - USB socket 5 V - Armrest, driver's and passenger's door - Mud flaps, front - Mud flaps, rear - Wheels: Jack, hydraulic - Wheel arch lining - Live Traffic Information - Marker lights, side - Multifunction steering wheel - Cable duct on the side wall - Retrofitting of a trailer coupling possible - Chassis number: W1V9076331P451809 1st owner, no re-import (German vehicle), not a rental car, top condition, non-smoking vehicle, original Mercedes Benz service booklet, trade-in of old vehicle possible, workshop-inspected including warranty, DEKRA used car condition report available upon request. We would be happy to deliver the vehicle, purchased locally, to your home for a price of 0.50 € / KM. The minimum cost is 150.00 €.

Condition: used, mileage: 76,480 km, power: 140 kW (190.35 HP), first registration: 06/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,932 mm, total width: 2,020 mm, total height: 2,785 mm, loading space volume: 13 m³, loading space length: 3,495 mm, loading space width: 1,771 mm, loading space height: 1,959 mm, Year of construction: 2022, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, - Internal No. 67.66 - Dimensions, passenger/cargo area: Length to driver's seat 3,479 mm x Length to partition 2,186 mm x Width 1,778 mm x Height 1,967 mm - Sortimo workshop van equipment, left and right, extra charge 1,000 € - All-wheel drive 4x4 with Torque-on-Demand - Transmission: 9G-TRONIC - Climate control: Tempmatic - MBUX multimedia system with 7-inch touchscreen - Navigation with voice control, Apple CarPlay and Android Auto - Package: Parking package with reversing camera - Radio: Digital radio DAB - Spare wheel, off-road version - Spare wheel holder with jack - Off-road version - Thermal insulation, driver's cabin - Thermal insulation, cargo area - Auxiliary heater (hot water), programmable and with remote control - WET WIPER SYSTEM - Seat heating, driver's side - Seat heating, passenger side - Seats: Pre-wiring for seat configuration 3/-/ - Seat: Lumbar support, passenger seat, electric - Seat: Lumbar support, driver's seat, electric - Comfort driver's seat - Comfort headrest, driver's side - Comfort passenger seat - Rain sensor - Package: Acoustic package - Package: Charging package, instrument panel - Tires: All-season tires - Rear door, double-wing opening, with side wall - Seats: 3-seater bench, 1st row - Cruise control - Partition, continuous to the C-pillar - Wooden floor in the passenger/cargo area - Tinted glass in the rear, black - Rails for roof rack - ATTENTION ASSIST - Axle ratio i = 3.923 - Airbag, passenger side - Step, rear door - Exterior mirrors, electrically foldable - Battery: AGM battery 12 V / 92 Ah - Turn signal lights, side, front - Exterior mirrors without turn signal - Heated windshield with band filter on the front - Warm air duct to the passenger compartment - Pre-wiring, electrical system, parametric special module - Adjustable loading area up to the railing, in conjunction with partition - USB socket 5 V - Armrest, driver's and passenger's door - Mud flaps, front - Mud flaps, rear - Wheels: Jack, hydraulic - Wheel arch lining Tsdpfx Aaozkxgnohjc - Live Traffic Information - Marker lights, side - Multifunction steering wheel - Cable duct on the side wall - Retrofitting of a trailer coupling possible - Chassis number: W1V9076331P451809 1st owner, no re-import (German vehicle), not a rental car, top condition, non-smoking vehicle, original Mercedes Benz service booklet, trade-in of old vehicle possible, workshop-inspected including warranty, DEKRA used car condition report available upon request. We would be happy to deliver the vehicle, purchased locally, to your home for a price of 0.50 € / KM. The minimum cost is 150.00 €.

Condition: as good as new (ex-display), Tightening bolt, manufacturer: Nikken Thread diameter: M 24 Dowel diameter: 22 mm Dowel length: 47 mm Centering collar diameter: 25 mm Tsdeb Hy Uyspfx Aahoc Wrench size: 32 mm Height of wrench surface: 10 mm Overall length: 85 mm Packaged, not yet used Several available

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). DMS SG9050 sorting grapple with rotator / new / in stock & immediately available / incl. teeth (screwable) Price: €10,190.00 net / €12,126.10 gross - Shell width: 500 mm - Volume: 200 L - Weight (without rotator): 320 kg - Rotator weight: 77 kg - Operating pressure: 280 bar - Closing force: 26 kN - Torque: 3,000 Nm - Opening width: 1,721 mm - Excavator class: 6 - 9 tons Optional: - Cutting set €460.00 net - Pipe grip set €1,330.00 net - Soft grip set €830.00 net - MS03 adapter plate: €570.00 net - MS08 adapter plate: €910.00 net We have many other DMS grapples in stock and available for immediate delivery! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are the official Westtech sales and service partner. We are the official Magni telehandler sales and service partner. We are the official Gierking GMT sales and service partner. We are the official OilQuick sales and service partner. We are the official Weber MT sales and service partner. We are the official Holp sales and service partner. We are the official DMS sales and service partner. We are the official Seppi M. sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. We are the official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete DMS range for you! Subject to errors and prior sale! = Further information = Todpfxjyltuqo Aahjc Application: Construction Please contact Marius Herden for more information.

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). DMS SG3535 Sorting Grapple / New / In stock & immediately available / Incl. teeth (screwable) Price: €4,390.00 net / €5,224.10 gross - Shell width: 350 mm - Volume: 50 L - Weight (without rotator): 112 kg - Rotator weight: 29 kg - Operating pressure: 250 bar - Closing force: 16 kN - Torque: 1,200 Nm - Opening width: 976 mm - Excavator class: 2 - 3.5 tons Optional: - Cutting set: €330.00 net - Pipe grip set: €990.00 net - Soft grip set: €620.00 net - MS03 adapter plate: €570.00 net We have many other DMS grapples in stock and available for immediate delivery! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. Tsdpeyix H Tjfx Aahec We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete DMS range for you! Subject to errors and prior sale! = Further information = Application: Construction Please contact Marius Herden for further information.

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). DMS SG12060 sorting grapple / new / in stock & immediately available / incl. teeth (screwable) Price: €13,290.00 net / €15,815.10 gross - Shell width: 600 mm - Volume: 251 L - Weight (without rotator): 642 kg - Rotator weight: 88 kg - Operating pressure: 320 bar - Closing force: 46 kN - Torque: 4,200 Nm - Opening width: 1,830 mm - Excavator class: 8 - 12 tons Optional: - Softgrip XL set: €3,590.00 net - MS08 adapter plate: €910.00 net - MS10 adapter plate: €2,780.00 net We have many other DMS grapples in stock and readily available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are the official Westtech sales and service partner. We are the official Magni telehandler sales and service partner. We are the official Gierking GMT sales and service partner. We are the official OilQuick sales and service partner. We are the official Weber MT sales and service partner. We are the official Holp sales and service partner. We are the official DMS sales and service partner. We are the official Seppi M. sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. We are the official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete DMS range for you! Errors and prior sale excepted! = Further information = Intended use: Construction Tsdpfxjykhrzs Aahjc Please contact Marius Herden for more information.

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (at tel. ). DMS SG22090 sorting grapple / incl. rotator / new / in stock & immediately available / incl. teeth (screw-on) Price: €19,390.00 net / €23,074.10 gross - Shell width: 900 mm - Volume: 542 L - Weight (without rotator): 897 kg - Rotator weight: 168 kg - Operating pressure: 320 bar - Closing force: 52 kN - Torque: 4,200 Nm - Opening width: 1,900 mm - Excavator class: 17 - 22 tons Optional: - Softgrip XL set: €3,590.00 net - MS10 adapter plate: €2,780.00 net - MS21 adapter plate: €3,350.00 net - OilQuick OQ 70/55 adapter plate (currently mounted): €5,460.00 net We have many other DMS grapples in stock and readily available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. Todpfx Aeykhtlsahsc We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete DMS range for you! Errors and prior sales excepted! = Further information = Intended use: Construction Please contact Marius Herden for further information.

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). DMS SG9050 Sorting Grapple / New / In stock & immediately available / Includes teeth (screw-on) Price: €8,390.00 net / €9,984.10 gross - Shell width: 500 mm - Volume: 200 L - Weight (without rotator): 320 kg - Rotator weight: 77 kg - Operating pressure: 280 bar - Closing force: 26 kN - Torque: 3,000 Nm - Opening width: 1,721 mm - Excavator class: 6 - 9 tons Optional: - Cutting set: €460.00 net - Pipegrip set: €1,330.00 net - Softgrip set: €830.00 net - MS03 adapter plate: €570.00 net - MS08 adapter plate: €910.00 net We have many other DMS grapples in stock and available for immediate delivery! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete DMS range for you! Errors and prior sale excepted! = Further information = Tedpfxoyltt Hs Aahjc Intended use: Construction Please contact Marius Herden for further information.

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, axle configuration: 8x4, fuel: diesel, driver cabin: day cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, navigation system, onboard computer, traction control, trailer coupling, - Adaptive Cruise Control - Heated mirrors - Leaf spring suspension - Differential lock - High beam headlights - Low noise - Speed limiter - Air conditioning - Air-suspended seats - PTO - Rearview camera - Sun visor X TO GO“EUROMIX TO GO“ OFFERS YOU IMMEDIATELY AVAILABLE NEW VEHICLES FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS WHO ARE IN AN URGENT NEED. (SHORT-TERM CAPACITY EXPANSION OR REPLACEMENT INVESTMENT) Your advantages: - Immediately deployable complete vehicles (concrete mixer/tipper) - Immediate availability directly from the manufacturer - Superstructure, assembly, commercial vehicle - Best price-performance ratio - Financing options - Trade-in of your old vehicles VOLVO FMX13 500 8x4 L13 EURO 6e EuromixMTP TMK 22m³ Square tipper body Vehicle data Year of manufacture: 2026 New vehicle Volvo FMX 500 Wheel arrangement: 8x4 Permissible total weight: 32,000 kg Technical gross train weight: 60,000 kg Wheelbase: 4,350 mm Engine: Volvo D13K 12.8-liter in-line six-cylinder Output: 368 kW (500 hp) Torque: 2,500 Nm Tjdpez Erufofx Aahsc Emission standard: Euro VI Step E Volvo I-Shift 12-speed automatic transmission Leaf spring suspension front and rear Left-hand drive Day cab Cab color: Winter White Engine & Drive equipment Volvo D13K Euro VI Step E engine Volvo I-Shift 12-speed automatic transmission Volvo Engine Brake Plus (VEB+) I-See predictive cruise control I-Roll fuel-saving function Economy and Balanced driving programs Reinforced transmission for construction site use Engine auxiliary drive SAE 1410 Transmission oil cooler Two-cylinder air compressor (900 l/min) Roof air intake Heated fuel filter Chassis Wheel arrangement 8x4 Leaf spring suspension front and rear Front axles 2 × 8,000 kg Rear axle bogie 26,000 kg Planetary rear axles Differential locks Active Grip Control Axle ratio 3.33 Dual power steering Wheels & Tires Steel rims Continental CrossTrac 315/80 R22.5 Tire pressure monitoring system Tire inflation hose 20-ton jack Onboard tools Cab & Comfort Day cab Air-suspended comfort driver's seat Passenger seat with adjustable backrest Air conditioning with sun sensor Digital 12-inch instrument cluster Smart tachograph DTCO 4.1 DAB radio Four speakers Multi-function steering wheel Electrically adjustable and heated exterior mirrors Curb and front mirrors Roof hatch Central locking with remote control Tinted windows Additional cab insulation Safety equipment Electronic Stability Program (ESP) ABS / EBS Hill start assist Emergency braking assistant (AEBS) Side collision assistant Driver alertness assistant Adaptive cruise control Rear view camera Rear warning system LED headlights LED daytime running lights Automatic headlights Additional equipment 275-liter fuel tank 57-liter AdBlue tank Lockable fuel tank caps Body Builder Module Electrical superstructure interface VBG trailer coupling Aluminum rear underrun protection Two...

Condition: new, mileage: 10 km, power: 125.03 kW (169.99 HP), first registration: 08/2026, fuel type: diesel, overall weight: 3,500 kg, tire condition: 100 %, color: white, gearing type: mechanical, number of seats: 3, loading space length: 4,200 mm, loading space width: 2,100 mm, loading space height: 2,100 mm, Equipment: ABS, EBS, air conditioning, airbag, cruise control, electronic stability program (ESP), non-smoking vehicle, power assisted steering, traction control, New Renault Master chassis, L3 2.0 170 hp + insulated body Standard equipment: • Option: socket on the B-pillar • Tire pressure monitoring system • Rain and light sensor • Steel underrun protection • “Wide View” interior mirror • Full-size spare wheel • Standard tires • Lane keeping assist • EMRD3 approval criterion • LED low beam and daytime running lights • RCall system • Rear parking sensors • Driver fatigue warning • Traffic sign recognition • Emergency braking assist • Driver airbag • Side marker lights • Central locking • ABS • Cruise control with speed limiter • Wireless smartphone charger • 10-inch “OpenR Link” multimedia system with wireless smartphone mirroring • Manually operated air conditioning • Electrically adjustable, heated, and manually folding exterior mirrors • Height-adjustable seatbelt • Folding key • Two-level adjustable plastic steering wheel • Interior mirror • Electrically operated front windows, including pulse function • Driver’s seat with armrest and lumbar support • 2-seater “Mobile Office” bench seat with storage compartment • Cabin lighting • 12V socket in the cabin • Extendable passenger-side storage compartment • Trim of the partition to the driver's cabin with carpeting • Lockable storage compartment in the dashboard • Analog driver displays with 3.5-inch TFT display (monochrome) ENGINE • Engine type: Blue dCi 170 • Displacement (cm³): 1998 • Number of cylinders: 4 • Number of valves: 16 • Maximum power kW (hp): 125 (170) • Maximum torque (Nm): 380 – 1500 • Fuel type: Diesel • Emission standard: EURO VIe Insulated body Tsdpfx Ajz Ezlteahoc • Internal dimensions: 4.20 x 2.10 x 2.10 • Intermediate frame made of cold-formed steel profiles, hot-dip galvanized • Walls and roof of the body (40 mm thick, RTM process) consist of a 3-layer panel made of high-quality laminate, glass fiber reinforced using polyester resin, designed as sandwich panels with insulation. • Interior walls coated with reinforced AT laminate • Front wall and roof prepared for the installation of a selected refrigeration unit • Insulated floor, with an anti-slip layer • Aluminum exterior and interior corner profiles • Two-leaf rear door, opening 270°, with exterior locks • Side doors of the body • Door handles, fittings, locks, and the frame of the rear door made of stainless steel. • Plastic wheel arches, equipped with mud flaps. • One LED light • A set of cargo securing rails • Roof spoiler • 2 drain openings Net price for the complete vehicle: 43,900.00 EUR Optional equipment: ➢ Rear view camera: 350.00 EUR ➢ Carrier Citimax 350 L.A. refrigeration unit: 5,550.00 EUR (Power supply exclusively via the vehicle engine and heating with hot gas) ➢ Carrier Xarios 300 refrigeration unit: 7,600.00 EUR (Power supply via the vehicle engine and the 220-V power grid) ➢ Carrier Xarios 350 unit: 8,800.00 EUR (Power supply via the vehicle engine and the 220-V power grid)

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis HELLER MC 16 was manufactured in 2001. It features a generous X, Y, and Z-axis travel of 630 mm each, along with a tool magazine capacity of 80 pockets. The machine is equipped with a rotary table capable of handling a maximum clamping weight of 500 daN. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details. - Rotary Table Indexing Precision: 360 x 1°, precision 6"- Maximum clamping force of the rotary table: 500 daN (centered)- Rotary Table Max Tangential Torque: 10,000 Nm (clamped)- Rotary Table Max Tilting Moment: 8,000 Nm (clamped)- Pallet Changer Size: 400 x 500 mm, 61 x M12 mounting thread- Tool Magazine Capacity: 80 tool pockets, 1 insertion pocket- Max Tool Diameter: 72 mm (all pockets occupied) / 150 mm (with free adjacent pockets)- Max Tool Length: 320 mm- Max Tool Weight: 12 daN- Measuring System: Direct in X, Y, Z axes- Positioning Tolerance: 0.007 mm- Optional Equipment / Features: Hydraulic workpiece clamping, central cooling unit for motor spindle and cabinet, probe with IR receiver, chip conveyor, tool coding, manual workpiece setup station (rotatable 4x90°), drill breakage control, prepared for emulsion mist extraction- Included Components: Without clamping device, without machine pallet Tedpfx Ajz Dh Dtjahjc Technical Specification Taper Size SK 40

Year of construction: 2018, condition: good (used), PRATI NEW SATURN TE 370 Machine type: Inspection / Slitting / Rewinding / Die-Cutting Machine Working width: max. 370 mm Maximum material width: 390 mm Minimum material width: 80 mm Maximum speed: up to 300 m/min, depending on material Electrical connection: 3 x 400 V + N / 50 Hz Compressed air: 6 bar constant _____ UNWINDING SYSTEM The machine is equipped with a professional servo-controlled unwinding system including: • Pneumatic fixed unwinding shaft Ø 76 mm • Brushless servo motor • Maximum unwind roll diameter 850 mm • Automatic roll-end detection with machine deceleration and stop • Electronic web tension control • Closed-loop tension control via dancer roller • Movable splice table with pneumatic clamps The closed-loop system ensures stable web tension even during acceleration and deceleration. _____ WEB GUIDING BST Web Guiding System • Electronic web edge control • Ultrasonic sensor • Also suitable for transparent materials • Professional BST web guiding system Important: The BST TubeScan camera inspection system is NOT included in the machine. _____ INSPECTION / CORRECTION AREA The machine offers a dedicated working area for operator inspection and correction of defective material. • Inspection / correction table • Working area length approx. 655 mm • Forward and reverse operation This allows the operator to identify and correct defective sections before rewinding the finished roll. _____ MAIN DRIVE The PRATI SATURN uses modern servo technology for precise material handling: • Brushless servo drive • Electronic speed control • Electronic position and torque control • Specially coated pull roller • Pneumatic pressure roller • Controlled web acceleration and deceleration • Forward and reverse operation The system is designed to minimize material slippage and maintain accurate web transport during production. _____ SLITTING UNIT Professional slitting equipment including: • Removable knife shaft cassette • Removable upper knife shaft • Minimum slitting width approx. 13 mm • Upper and lower knives • Pneumatically controlled pressure roller after the slitting section _____ DIE-CUTTING CAPABILITY The machine configuration provides a professional platform for rotary die-cutting applications. According to the original machine specification: • Maximum die-cutting material width: 450 mm Todpfx Ajz Ea Itsahjc • Standard die size up to 14.5" • Minimum die size 12" • Matrix waste rewinding capability • Maximum matrix waste roll diameter approx.

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 4,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 680 mm, spindle motor power: 26,000 W, total height: 2,000 mm, total width: 2,050 mm, overall weight: 6,600 kg, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Mazak QT NEXUS 300 was manufactured in 2009. It features a maximum cutting diameter of 420 mm and a maximum swing of 680 mm. The machine is equipped with a drum turret with 12 stations and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QT NEXUS 300 horizontal turning machine we have for sale. Contact us for further details. • CNC: Mazatrol Fusion 640T Nexus (8.4" color LCD) • CE marked • Capacity • Max bar diameter: 77 mm • Max cutting diameter: 420 mm • Max swing: 680 mm • Spindle bore: 88 mm • Spindle center height: 1,080 mm • Max chuck workpiece weight: 450 kg • Main spindle • Max spindle torque: 600 Nm • Spindle nose: A2-8 • Chuck: 10" through-hole, type B210A815X • Axes • Cutting feedrate: X 8 m/min, Z 8 m/min • Rapid traverse: X 30 m/min, Z 25 m/min • Turret • Type: Drum turret • Stations: 12 • Turning tool shank: 25 × 25 mm • Indexing time: 0.8 s (½ turn), 0.2 s (single step) • Tailstock • Programmable, motor-driven movement • Stroke: 645 mm • Taper: No. 5 • Dead centre included • Live centre: NSK LC-5SW (speed up to 4,000 rpm) • Thrust selection: 10 levels • Control equipment and functions • Mazatrol Fusion 640T Nexus • Interfaces: RS-232C, Network • Background tool-path check • Machining Navigation – Prediction / Monitor / Results • Velocity and feedrate control • Tool path storage • 3.5" FDD unit • Coolant / machine equipment • Complete coolant system (tank 210 L, pump 520 W) • Preparation for side chip conveyor • Automatic tool eye • Hydraulic chuck pressure interlock • Chuck open/close confirmation • Double foot switch • Full chip and coolant guarding • Work light • Electrical • Power requirement (30 min rating): 49.69 kVA • Continuous power requirement: 43.83 kVA Additional equipment • European-market power transformer Todpez Eavwjfx Aahec • Foundation plates • One set of adjusting tools • Manuals included Technical Specification Driven Tools No Counter Spindle No

Condition: not inspected (used), Year of construction: 2011, operating hours: 12,000 h, functionality: unexamined, machine/vehicle number: 1200 000043 7, TECHNICAL SPECIFICATIONS CNC control: Siemens Sinumerik 840D Number of axes: 5 axes Tsdpfx Aoz Efpcsahsc Travels X-axis travel: 120 mm Y-axis travel: 120 mm Z-axis travel: 200 mm A-axis: -10° to +120° C-axis: 360° continuous Rotary table Diameter: 190 mm Maximum load: 10 kg A-axis speed: up to 100 rpm C-axis speed: up to 150 rpm Spindle Maximum speed: 40,000 rpm Power: approx. 6 kW Maximum power: approx. 7.7 kW Torque: approx. 1.6 Nm High-frequency spindle with ULTRASONIC technology Feed rates Rapid traverse X/Y/Z: up to 10 m/min Tools Tool holder interface: depending on machine configuration Maximum tool length: approx. 130 mm Maximum tool diameter: approx. 49 mm Tool magazine: depending on configuration General data Power supply: 400 V Connected power: approx. 25 kVA Compressed air: approx. 6 bar Machine weight: approx. 1,800 kg TECHNOLOGY The DMG SAUER ULTRASONIC 10 combines high-precision 5-axis CNC machining with ultrasonic-assisted machining technology. This technology is particularly well-suited for machining difficult materials such as: Ceramics Carbide / hard metal Glass Corundum Technical materials and hard and brittle materials Machine particularly suitable for the micromachining, watchmaking, medical/dental, optics, and high-precision application sectors. Subject to errors and changes in technical data.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). Tjdpfx Aszzlhaeahjc TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Loading option from above using an overhead crane Two waterproof work area lights CE certification • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: used, mileage: 2,13,736 km, power: 110 kW (149.56 HP), first registration: 01/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,180 mm, fuel: diesel, CO₂ emissions: 247 g/km, fuel tank capacity: 80 l, color: white, gearing type: automatic, number of gears: 6, emission class: euro6, number of seats: 3, total length: 5,050 mm, total width: 2,070 mm, total height: 2,310 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, navigation system, onboard computer, power assisted steering, power mirror, sliding door, start-stop system, trailer coupling, General information Number of doors: 5 Model range: Sep 2019 - Aug 2021 Cab: single Technical information Torque: 385 Nm Number of cylinders: 4 Engine capacity: 2.299 cc Top speed: 155 km/h Measures length/height: L1H1 Weights Empty weight: 1.855 kg Carrying capacity: 1.645 kg GVW: 3.500 kg Max. towing weight: 2.500 kg (unbraked 750 kg) Interior Interior: black Consumption Average fuel consumption: 6,9 l/100km (41 MPG) Urban fuel consumption: 7,8 l/100km (36 MPG) Extra urban fuel consumption: 6,3 l/100km (45 MPG) Maintenance, history and condition Number of owners: 1 APK (MOT): tested until 02/2027 Number of keys: 2 (2 hand transmitters) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Automatic dipped headlights Todpfxsz E Hmpe Aahec - Car kit - Climate control - Co-driver's bench - Driver's airbag - Electrically operated front windows - Front central armrest - Front fog lights - Height adjustable driver's seat - Height adjustable steering wheel - Ladder - Loading floor - Multifunctional steering wheel - Panelling - Passenger airbag - Radio - Radio with DAB+ - Rear doors - Rear parking sensor - Remote central locking - Reversing camera - Sliding side door right - Telephone enabled with Bluetooth - Third brake light

Condition: used, Technical details: weight: 400 kg number of strokes: - Hub / Min Torque: - kp dimensions L x W x H: 1,24 x 0,84 x 1,0 m For sale is an extensive package of high-quality tool holders, clamping devices, fixtures and accessories from the inventory of a Gleason-Pfauter P200 gear hobbing machine. The package comprises a large number of precision-manufactured components in various designs and dimensions, including: ·Various workpiece fixtures and clamping devices ·Precision clamping and locating mandrels ·Various clamping sleeves and clamping bodies ·Mounting and adapter rings in various diameters ·Tool holders and tooling fixtures ·Form/clamping jaws and associated interchangeable elements Tedozxxftopfx Aahjc ·Various precision fixtures manufactured by the German manufacturer BUNA ·Various special-purpose fixtures and adapters ·Extensive additional accessories as shown in the pictures Among the items included is a marked BUNA precision fixture No. 2457368.0, Ø32, A5, Made in Germany. *

Condition: good (used), machine/vehicle number: 10F5C1B-2A0A, The KEB COMBIVERT F5 frequency inverter is designed for controlling electric motors in industrial applications. The device belongs to the universal F5 series, widely used in machinery and production lines requiring precise speed and torque control. The F5 series is commonly used in industrial automation and supports both asynchronous motors and synchronous servo drives. It features a modular design, high configuration flexibility, and the ability to operate in demanding industrial environments. - Model: 10F5C1B-2A0A - Series: COMBIVERT F5 (Compact version) - Serial number: 301211195 - Production date: 2010-05 - Country of origin: Germany Input (Supply): - 1-phase / 3-phase: 200–230 V AC - Frequency: 50/60 Hz - Input current: 20/14 A (at 230 V) - UL rating: up to 240 V / 20 A Output (Motor): - 3-phase AC output - Output current: up to 10 A - UL rating: 9.6 A - Frequency range: 0–800 Hz Power: - Apparent power: 4.0 kVA - Motor rating: 2.2 kW (2/4 pole motors) The F5 inverter offers: - precise speed and torque control - scalar (U/f) and vector control modes - encoder and sensorless operation capability - integrated functions: * DC braking * PID controller * parameter management (up to 8 parameter sets) * motor protection functions - support for industrial communication interfaces (e.g., Modbus, Profibus, EtherCAT – depending on version) Construction and Visible Components: - control panel with START / STOP / ENTER / FUNC keys - communication port (RJ45, e.g., for operator panel or diagnostics) - connectors labeled X6B, X6C, X6D (communication or I/O interfaces) - terminal strip for control signals and power connections - compact enclosure for installation in a control cabinet (housing size “B”) This type of inverter is used in: - CNC machines and woodworking machinery - production and conveyor lines - pumps and fans - applications requiring variable speed motor control Tedpjyzpzgjfx Aahoc Due to the wide output frequency range (up to 800 Hz), it is also suitable for high-speed drive applications.

Condition: excellent (used), functionality: fully functional, mileage: 16,300 km, gearing type: hydrostat, fuel type: diesel, overall weight: 30,800 kg, empty load weight: 30,800 kg, lifting height: 6,900 mm, drive condition: 90 %, chain condition: 90 %, number of seats: 1, shovel volume: 3 m³, suspension: steel, Year of construction: 2018, operating hours: 15,999 h, Equipment: ABS, additional headlights, air conditioning, cabin, differential lock, head guard, hydraulics, low noise, onboard computer, rear pickup, steel tracks, tilting carriage, An authorized SUBARU dealer in Łaziska Górne has a Japanese-made CAT 330D2L crawler excavator for sale, complete with a set of three buckets and a soil loosening hook. Inspected by our mechanics, the hydraulics are fully functional and have minimal play. It has been nicely refurbished and prepared for further heavy-duty work. It features 60cm wide steel tracks, a GPS MC3000 for precise digging, and is additionally equipped with 360-degree cameras. WE OFFER AFFORDABLE TRANSPORT THROUGHOUT THE EUROPEAN UNION AS A PROMOTION WITH OUR FLEET! The price includes a complete set of documents for registration. We offer every form of payment: Leasing, credit, cash, and bank transfer. With cash payment or bank transfer, you can drive the vehicle away from the dealership immediately. Additionally, we handle insurance – we will calculate the cheapest premium for any vehicle – CHECK US OUT! We also deliver paid cars and trucks to the specified address throughout Europe. More information about our services is available from our sales representatives. Engine: Model: Caterpillar C7 Type: diesel, 6-cylinder, turbocharged, intercooled Displacement: 7.2 l Power: 204 kW (approx. 277 hp) Fuel injection: HEUI (hydraulic-electronic) Operating parameters: High torque at low speeds Very good cooperation with the hydraulics Stable operation under heavy load Advantages: Simple and durable design Low operating costs No complex exhaust emission electronics Proven unit for heavy earthmoving work Hydraulic system: Maximum working pressure: 35 MPa Pressure in lifting mode: 38 MPa Pump flow rate: approx. 480 l/min Rotation pressure: approx. 29.8 MPa Working forces: Bucket digging force: approx. 179 kN Arm digging force: approx. 126 kN Swing mechanism: Swing speed: approx. 11.5 rpm Torque: approx. 110 kNm Operating parameters: Maximum digging depth: approx. 7.2 m Maximum reach: approx. 10.7 m Loading height: approx. 6.9 m Maximum digging height: approx. 10 m Working equipment: Bucket capacity: approx. 1.5–1.8 m³ Boom length: approx. 6.15 m Arm length: approx. 3.2 m General parameters: Operating weight: 30800 kg Undercarriage: LC (Long Carriage) Track width: approx. 600 mm Application and main features: High digging force and efficient hydraulic system Simple and durable engine design with no complex exhaust emissions Very good parameters for heavy earthmoving and loading work Transport dimensions: Tjdpfx Aaozadcbohjc Transport length: 10.4 m Transport width: 3.19 m Transport height: 3.35 m Undercarriage width (LC): 3.19 m Track length on the ground: 4.0 m The stated price is net and applies to exports and for companies. A significant discount is possible for individual customers. We invite you to contact us directly by phone to get your best price!

Condition: used, functionality: fully functional, machine/vehicle number: 33124, mileage: 999 km, power: 235 kW (319.51 HP), first registration: 08/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 11.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Engine D0836LFLBI, MAN PowerMatic 08.12.OD torque converter automatic transmission, operated with steering column lever, manual (DNR selector), heated fuel filter, ABS, ASR, ESP, disc brakes, electronic braking system EBS, full-brake assist, emergency brake assist EBA Plus, emergency brake signal, front axle with leaf suspension, rear axle with air suspension and level adjustment, differential lock, MAN EVBec engine brake with multiple stages, MAN EasyStart hill start assist, exhaust pipe positioned high and to the left behind the cab, lane departure warning LDW, turning assist, MAN AttentionGuard driver alertness system, preparation for alcohol interlock, traffic sign recognition, distance warning, trailer hitch Rockinger 400G150B (40 mm) Cab CC (narrow, short, normal height), 2 seats, air-suspended driver's seat with seat heating, central locking with remote control, speed limiter, rain sensor, light sensor, LED headlights, LED daytime running lights, tinted windshield and door windows, lift-up roof, heated and electrically adjustable mirrors, electric windows, automatic climate control, multi-function steering wheel, safety automatic, cruise control, digital axle load display (ALM), MAN Media System Navigation Advanced 7-inch with navigation and Bluetooth hands-free system, rear view camera, smoker's package, 2x LED rotating beacons on the roof, pre-equipment for Toll-Collect, digital tachograph CONTI, sun visor on driver's door, sun shield Tedjz Ha Ivopfx Aahec Cylindrical container designed as a tipper (tipping angle min. 35°), container wall thickness 6 mm, total air volume approx. 11.5 m³ (sludge compartment approx. 10.5 m³ / water compartment approx. 1.0 m³), water compartment is welded into the front of the container with inspection opening, water compartment level indicator made of flexible transparent hose, filling via a Storz "C" connection and free flow line, 2x water tanks, each approx. 0.5 m³, on the left/right side of the container made of plastic, rear flap hydraulically opens upwards over the entire cross-section with pipe rupture protection, hydraulic latch locking, sludge compartment level indicator with external scale with divisions every 500 l and internal float, lower and upper suction connection DN 100 with Perrot coupling system and blind cover, discharge apron made of stainless steel, 2 pneumatically operated slide valves, container discharge: free discharge through the lower suction connection or by tipping to the rear, vacuum pump Gardner Denver Wittig RFW 150 (850 m³/h) hydraulically driven, 4-way valve pneumatically controlled from the control panel, over-suction protection, oil separator, HD pump Pratissoli KE 30H (approx. 70 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation continuously adjustable, small hand-operated HD reel made of stainless steel designed for 60 m HD hose DN 13, 40 m are available, spray gun, control panel made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, hooks on the bottom flap for transporting long continuous hoses, waste container made of stainless steel, tiltable at the rear left, toolbox made of stainless steel, ladder 3 m long, hand wash basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights each on the right and left of the

Condition: used, Year of construction: 2005, functionality: fully functional, turning diameter over cross slide: 500 mm, turning diameter: 800 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 382 mm, travel distance Y-axis: 65 mm, travel distance Z-axis: 2,100 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 20 rpm, torque: 2,200 Nm, overall weight: 12,800 kg, CNC FANUC 180i with 3D software WORK AREA: Maximum turning diameter: 800 mm Turning diameter above the cross slide: 500 mm X-axis travel: 382 mm Y-axis travel: ± 65 mm Z-axis travel: 2,100 mm MAIN ELECTRIC SPINDLE: Spindle housing: 300 mm high, 5 mm Bar capacity: 121 mm Power (40/100% ED): 43/33 kW Torque (40/100% ED): 2,200/1,700 Nm Rotation speed: 20 - 2,500 rpm AXIS FEED RATES: Rapid traverse speed X/Z: 60/35 m/min TOOL TURRET: Number of tool stations: 12+6 Number of powered tools: 12 Tool holder according to DIN 69880: 50 mm Power (40% ED): 15.7 kW Torque (40% ED): 50 Nm Rotation speed: 3,500 rpm Maximum clamping collet diameter: 26 mm TAILSTOCK: Sleeve travel: 150 mm Center mounting: CM 5 Maximum sleeve thrust: 1,800 daN Machine weight: 12,800 kg Machine complete with: -Steady rest -Set of fixed and powered tool holders -Operating manuals and CE declaration Tsdpfxozuy H Ds Aahsc Year of manufacture: 2005

Condition: like new (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, torque: 115 Nm, controller manufacturer: Fanuc, total height: 2,750 mm, total length: 2,200 mm, total width: 2,360 mm, table width: 500 mm, table length: 900 mm, table load: 500 kg, overall weight: 6,400 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, Year of manufacture: 2013 Tedpfx Aszr Uq Soahec CNC Fanuc TABLE Table size: 900 x 500 mm Five T-slots: 18 H 8 mm Maximum permissible weight on the table: 500 kg WORKING CAPACITY X-axis: 700 mm Y-axis: 530 mm Z-axis: 560 mm Spindle nose – table surface distance: 150 / 710 mm Spindle axis – column surface distance: 550 mm SPINDLE Spindle diameter: 70 mm Spindle taper connection Big Plus: ISO 40 DIN 69871 Spindle speed: 50/12,000 rpm Spindle motor: 15/11 kW Maximum torque: 115 Nm FEED RATES Rapid traverse rates for X/Y/Z axes: 32 m/min Working feed rates: 20 m/min TOOL MAGAZINE Number of tools: 30 Tool taper: ISO 40 Maximum tool diameter (without adjacent tools): 76 / 125 mm Maximum tool weight: 7 kg MACHINE DIMENSIONS Height: 2,750 mm Footprint: 2,200 x 2,360 mm Weight: 6,400 kg Machine complete with: •Presetter •Probe •Vise •Tool cabinet •Instruction manuals and CE declaration