Used Rcm Cleaning Systems for sale (43,193)

Year of construction: 2015, operating hours: 4 h, condition: used, functionality: fully functional, Equipment: CE marking, The equipment neutralizes hazardous gases specified in the requirements provided by the owner to secure emission of clean air. Sold as a complete system together with the chemical reactor, the electrolytic block and the waste water treatment system. The whole system is suitable for obtaining and cleaning of Cu, Au, Ag, Pd, Pt. The system includes 12 transformers for electrolytic baths (including 84 baths), complete pipe system, installed, can be tested and inspected. It contains neutralizer and automatic operation system. It was operating 2-4 hours during test run. The whole system is in new state. Iodpfjzmqv Hjx Altebb

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. Ibodjzp Edwspfx Altsb The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. All specifications according to the manufacturer.

Condition: ready for operation (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, Equipment: compressor, documentation/manual, The Morgana Major folder is a compact, high-performance folder with two fold plates. It is designed for short-run digital and commercial print shops. Built for reliable, easy-to-use folding of brochures, leaflets and booklets, it offers quick job changes and consistent fold quality for mixed media. Its simple setup and robust air feeding system make it a best choice for finishing departments seeking speed and repeatable results. Ijdpfx Ajz Agvboltsbb Maximum sheet size: 648mm x 365mm Minimum sheet size 148mm x 140mm Maximum paper weight 240 gsm Minimum paper weight 56 gsm Load capacity 500 sheets 80 gsm Speed up to 27.000 A4 sheets per hour

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste Iodpfxeyk Ip Tj Altsbb ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Clean production environment Fully operational Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Save significant capital vs buying new Serious enquiries only. Available immediately.

Condition: new, Year of construction: 2020, functionality: fully functional, BOSCH Pharmatec CIP System 8X0400 – Never Used – GMP Pharma Version For sale is a complete BOSCH Pharmatec CIP (Cleaning in Place) system in new condition (Never Used). The system was manufactured in 2019/2020 but was never put into operation. Since delivery, it has been stored professionally and is in excellent condition. The system was developed according to the highest GMP standards and is ideally suited for the pharmaceutical, biotechnology, vaccine, and food industries. Technical Data Manufacturer: Bosch Pharmatec GmbH (now Syntegon) Type: CIP Unit 8X0400 Year of Construction: 2019 / 2020 Condition: Never Used / New GMP Version Stainless Steel Design CE Marking Immediately available Scope of Supply Ijdpfezpy Nzsx Altebb BOSCH Pharmatec CIP Unit 8X0400 Stainless Steel Water Tanks CIP Satellites Complete Pump Skids KPA Hygienic Pumps Endress+Hauser Measuring and Control Technology Hygienic Stainless Steel Piping Valves and Fittings Heat Exchangers Original Bosch Documentation P&ID Flow Diagrams Layout Drawings and Technical Documents Important Note The system is offered without pneumatic components and without control (automation). This allows the system to be individually adapted to the buyer's requirements and equipped with a modern PLC, pneumatic, and automation solution as desired. This offers maximum flexibility for new installations or integration into existing production facilities. Application Areas Pharmaceutical Industry Biotechnology Vaccine Production Sterile Production Facilities API Manufacturing Supply of Purified Media GMP Production Plants Contract Manufacturing (CMO) Advantages Original Bosch Pharmatec Quality Never Put Into Operation High-Quality GMP Version Complete Technical Documentation Available Flexible Retrofitting of Control and Pneumatic Technology According to Customer Requirements Immediately Available Significantly Cheaper Than a Comparable New System The system can be inspected by appointment. We will gladly send you further photos, technical documents and drawings upon request.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 203-654, controller model: Siemens S7-200, number of chambers: 1, usable tank capacity: 4,000 l, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! The collection basin was renewed in 2022! TECHNICAL DETAILS Number of chambers: 1 Chamber volume: 4,000 l Cleaning agent: Surfaclean 936 or Surfaclean 980 Concentration: 5% Ultrasonic power: 2 × 2,000 W Ultrasonic frequency: 25 kHz MACHINE DETAILS Control type: Siemens S7-200 Connected load: 75 kW Heating power: 57.5 kW Dimensions of the washing system: 1,900 × 2,800 × 1,700 / 3,300 mm with lifting device Dimensions of the collection basin: 3,600 × 3,300 × 400 mm Control voltage: 24 V DC EQUIPMENT Lifting device Lift truck with washing baskets Newly manufactured collection basin Ultrasonic cleaning Tools and fixtures Operating manual Wiring diagrams Maintenance history, partially available Note: Ibsdpfszx S E Hjx Altob The ultrasonic washing function was working during the last use. The lifting function for moving the container with the washing material did not function properly. The temperature control of the washing liquid did not function properly. The oil separation of the washing liquid did not function properly.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Washer for plastic cans and bags Brand: Boldt Systems Model: W 400.4.3.1 Serial number: BW0 04 122 Year of manufacture: 2005 Steam heated Ibodpfswxy Hzox Alteb Stainless steel mesh belt Belt width: (3x) 380 mm Overall dimensions: 6000 mm x 2100 mm x 2400 mm

Condition: used, Year of construction: 2010, fuel type: diesel, power: 88 kW (119.65 HP), gearing type: mechanical, color: white, number of standing places: 3, Equipment: 3rd hydraulic function, ABS, airbag, all-season tires, lighting, trailer coupling, I am offering a Peugeot Boxer diesel panel van, 2.2 / 88 kW, first registered in July 2010, with 171,000 km, a 6-speed manual transmission, and a trailer hitch. It is being sold because I am switching to different technology. !The vehicle does not have a valid MOT (technical inspection), is registered, and is ready to drive. Ijdpfx Aszwmfrsltobb It has green license plates! The vehicle is equipped with a belt-driven auxiliary drive and a Dynaset HPW hydraulic high-pressure water pump. It includes a high-pressure cleaning system up to 180 bar, a high-pressure lance, a 1000-liter tank, and automatic hose retraction. Signs of wear are present.

Year of construction: 2017, condition: used, REF: MM6447 1 x Camline Palletising Systems Ltd cartesian automated palletiser. The palletiser automates the stacking process of products and goods that can otherwise be labour intensive and expensive, putting undue stress on workers. Cartesian or ‘Pick and Place’ palletisers are characterised by the structural beams and axes which are used to ‘pick and place’ the items. They are very flexible machines and can move products in three directions, thus being used to create complex pallet patterns. Typically, one or two (sometimes more) products are collated on an infeed conveyor and collected with a gripping device, which then places them on to the pallet. Manufacturer – Camline Palletising Systems Ltd. Model – Compact Palletising System. Date of manufacture – 2017. Entry via conveyor and exit via manual removal of the pallet. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 32 Amps. Air pressure - 6 Bar. Overall dimensions - 2m wide x 2.7m deep x 4.4m high (approx.). Ibjdezbkl Sopfx Altob

Year of construction: 2019, condition: good (used), Venjakob RNV 2.0 Exhaust Air Purification System Iodpfx Alezrl Ibjtsbb The system incinerates gaseous pollutants and odors from production exhaust air in order to release clean air into the environment. Extraction: Process air containing solvents or odors (e.g., from painting facilities, the chemical industry, or printing plants) is fed into the system. Preheating: The contaminated air flows through internal ceramic heat storage units and is heated to extremely high temperatures. Combustion (Oxidation): In the combustion chamber, the natural gas feed (the support burner) ignites the air. At temperatures of up to 850°C, organic pollutants (VOCs) decompose completely into harmless water vapor (H₂O) and carbon dioxide (CO₂). Energy recovery: The cleaned, hot air subsequently flows through a second ceramic bed, releasing its heat there. The system "stores" the heat for the next batch of contaminated air. This makes the system extremely energy-efficient, as very little additional gas firing is required after the start-up phase. System specifications Manufacturer: Venjakob Umwelttechnik Type: RNV 2.0 Year of manufacture: 2019 Serial number: 15212 Throughput volume: 2,000 Nm³/h Gas & Combustion Gas type / Calorific value: Natural gas H / 10.4 kWh/Nm³ Firing heat output range: 30 kW Flow pressure: 200 – 1,500 daPa Max. combustion chamber temperature: 850°C Electrical connections Mains connection: 400 / 230 V AC Connected load: 24 kVA Current draw: 35 A "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs on request!

Condition: used, Year of construction: 1998, machine/vehicle number: 980919, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, volume flow: 3,450 m³/h, intake vacuum (max.): 3,550 mbar, suction capacity: 3,450 m³/h, intake manifold diameter: 250 mm, filter area: 23 m², total height: 2,959 mm, total length: 2,500 mm, total width: 1,238 mm, overall weight: 750 kg, Used clean air system for two to three woodworking machines operating simultaneously. Suitable for outdoor installation. New filters are included. The control system is equipped with a speed control function via a frequency inverter. Ibodpfx Alezukulsteb

Year of construction: 2022, condition: used, functionality: fully functional, This is a hood-type dishwasher from the manufacturer Meiko, model Upster H500 M2, manufactured in 2022, including feed/discharge tables, spray arm, and mobile water softener. The machine has undergone a major inspection in our in-house workshop and is therefore fully functional and free of defects. It comes with a 6-month warranty on all electrical components. The hood-type dishwasher has only 5388 operating hours and 9648 wash cycles and was used in a small company canteen that has since closed. You will receive an invoice with VAT shown. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional. Flexible shipping or self-collection options. Competent advice – before and after the purchase. Provision of operating manuals, connection diagrams and spare parts. Inspection according to DGUV V3. Technical data: W x D x H: 635(687) x 750(850) x 1470 mm, feed/discharge table dimensions: 1200 x 700 mm Basket size: 500 x 500 mm Passage height: 440 mm Program run time: 90 / 150 / 210 s Basket capacity: 40 / 24 / 17 baskets/h (theoretical) Tank capacity: 22.0 L Rinse water quantity: 2.6 L/wash cycle Total connection value: 10.6 kW Fuse rating: 20A On-site boiler heating: 7.50 kW / 10.82 A Tank heating: 2.00 kW / 8.70 A Ibodezzlntepfx Alteb Wash pump: 0.75 kW / 4.60 A Degree of protection of the machine: IP X4 Condition: Used, inspected and fully functional. Your advantages: Simplest operation thanks to clear and easy-to-understand symbols Digital temperature displays for wash and rinse water 3 program run times Eco-filter system for best cleaning results through warmer and filtered tank water Machine and hood double-walled – ideal heat and noise insulation Hood open at the rear – prevents steam from bothering the operator Temperature-dependent extension of wash time – hygiene safety under all operating conditions Wash and rinse systems made of stainless steel Hood start automatic Including lye pump, pressure booster pump, as well as rinse aid and detergent dosing devices, basket equipment Optional: with built-in water softener EW 10 Standard equipment: Liquid detergent dosing device with suction lance for on-site storage containers Rinse aid dosing device with suction lance for on-site storage containers Connection set Lye filter system AktivPlus Pressure booster pump Basket basic equipment: 1 universal basket VKV 50/1 Additional equipment: Original Meiko feed/discharge tables Including spray arm Including mobile water softener Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors Do you have any questions, would you like to request advice or would you like to see something on site? You can reach us during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively according to our general terms and conditions (GTC).

Year of construction: 2017, condition: excellent (used), Tube cutting system with optical laser mark detection The FZH Vario Flex is a fully automated tube cutting system. It is specifically designed for the precise, reliable cutting of stainless steel tubes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser mark detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via optical detection of a laser mark applied to the tube. Thanks to an integrated rotating 3-jaw cutting head and a micro-spray unit (minimum quantity lubrication), the machining process is extremely gentle on the tools. The tubes remain almost completely dry and free of heavy soiling. The entire process—from loading and clamping to cutting and unloading—is highly automated and follows a material-friendly cycle. Fully integrated labeling and traceability system: The system is designed to meet modern quality standards (Industry 4.0 / automotive). Following the cutting process, a barcode label is automatically generated, assigned, and printed to ensure seamless part traceability (tracking and system logging are directly integrated). Equipped with two separate bin discharge stations (rear-facing hatches with sliding doors), the system automatically switches to the second station when a bin is full. Finished KLT bins can be removed while the machine continues to operate, without interrupting the production cycle. Technical Data & Capacities Maximum tube length (feed): 1,000 mm Material specification: Optimized for stainless steel tubes (including those with pre-assembled union nuts or flared ends) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Continuously adjustable for different tube lengths via a manual handwheel Cutting method: Chip-removing sawing / rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant/lubrication system: Integrated micro-spray unit (MMS) for minimum quantity lubrication Control system: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup mode: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panels Logistics / Output Integrated bin deposit station 2 separate bin output stations for rear-side removal via protected interlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario Flex Special features: Tubes with union nuts Diameter: Ø 6–76 mm Output length: L = 150–1,000 mm Cutting based on laser marking Wall thickness: 1 to 1.3 mm Condition: The system is in good visual and mechanical condition in excellent, clean condition. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de Ibodezw Ukcepfx Altjb You can find more items—new and used—in our shop! International shipping costs on request!

Year of construction: 2002, condition: repair required (used), ULMA, year of manufacture 2002 • Extended infeed conveyors. • Centralized lubrication. • Sanitary clean out the tray. • Gravity and motorized exit conveyors: inline, 90º, 180º, ... • Additional 1 meter sealing device. • Automatic image centring device for printed films. • Printed band attachment. • Transparent tray detection. • Sealer Cooler. • Others (Ask). A high-performance wrapping machine, specially developed for the wrapping of trays in central processing facilities (meat, poultry, fish, vegetables, fruits) and high volume supermarkets. A large range of models for customer requirements. Its strength, reliability, ease of operation, and automatic size change, make it the most automatic size change, make it the most productive and versatile machine available, possibility to wrap with several kinds of film: PVC, polyethene and polyolefines. TECHNICAL FEATURES (Depend on the model) • 1 or 2 film rolls with automatic roll selection. • Automatic recognition of the tray dimensions or manual. • Automatic or manual selection of film length and width. • Universal elevator. • Self-diagnostic capability. • Film tension control. • Forward and reserve jog capability. • 4-way film stretch with lateral pre-stretch. • Temperature control for the sealing belt. • Oversize package detector. • Mechanical torque limiter. • Guards and safety devices according to international standards. • Heavy duty construction with corrosion-resistant material. Power supply: 380 V, 12 kW Bizerba GV labeller, manufactured in 2002 Bizerba 18A scale with Bizerba AB display. Automatic labelling and weighing system for products packaged in the food area. Electric power: Voltage 220 V, Frequency 50 Hz Current 1.7 A. Dimensions of tape width 300 mm. External dimensions of the machine: (mm) 1860 long x 720 wide x 1300 high. Compressed air supply of the blower label: air pressure: 6 bar, air flow: min. 100 l / min, compressed air. without oil, filtered at 10 µm, Label dimensions: 100x100. The separation between labels: from 2 to 20 mm. Thermal print head - resolution of 8.0 points Weighing from 1gr to 6000gr. Maximum labelling capacity 60 packages/minute. Equipment prepared for PC connection, Bizerba software allows the realization and design of labels adapted to your needs. Ability to print all types of barcodes, customer logos, etc. The equipment was reviewed, rebuilt, and guaranteed with the following maintenance: change of conveyor belts, thermal print head, and engine belts. High-quality equipment and great performance in terms of speed and reliability. The label and the scale are mounted on an output conveyor belt. Weighs at least 40 g up to a maximum of 18 kg For the Romanian companies, there is the possibility of selling in instalments. Price upon request, FCA: Oradea/Romania We sell this line refurbished Isdpfx Aog H Tqusltsbb Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, functionality: fully functional, GGE Minisilos 7.5kw dust extraction unit Power: 7.5 kW Filter bag cleaning system 36 filter bags Filter bag diameter: 160 mm Filter bag length: 2000 mm Dust collection hopper with a capacity of 4.84 m³ Air recirculation to the hall is possible. Isdpfx Alez Ahw Tetebb

Condition: excellent (used), BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST Fully automatic PLC parts cleaning system The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without dismantling. The unit is space-saving, quiet and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz, 16A CEE 5p 6h plug Drain: 1 1/4" outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Whole components (without dismantling) Quality seals: Stainless steel, service package available Maximum filling capacity: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heater: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 kg Application area: The RWR 80 L KST fully automatic PLC has been developed for the field of plastic injection molding and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST fully automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system begins to heat up. During the heating-up period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically, after the instructions displayed on the screen have been confirmed. Condition: used Scope of supply: (See picture) Ibsdozgclmspfx Altjb (Changes and errors in the technical data, specifications are subject to change!) We would be happy to answer any further questions you may have on the phone.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6372 Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Manufacturer – Polar Systems Ltd. Date of manufacture – 2019. Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high. Iodoynnlispfx Altjbb

Condition: excellent (used), Year of construction: 2022, operating hours: 3,600 h, functionality: fully functional, Description: Like-new welding cell including bolt-setting equipment with only 3600 operating hours, consisting of: Ibjdpfx Aozvm Anjltsb Robot Qirox QRC 350, QC2 control system including connection cable, programming handheld device, gas nozzle sensor, arc welding search, point editor, QWP, QTI, Manax, hard drive, center-based circular programming Base stand Welding machine Qineo Next 452 Motion, wire feeder, welding torch, torch testing gauge, hose package, mechanical cleaning, 1 light curtain, start pre-selection, safety grid in the insertion area, service door with limit switch protection 1 manipulator QR-WP-TC 2.5 KN for components up to Ø 800 mm, plate distance 2000 mm and a load capacity of 250 kg. 1 extraction hood including hose lines without filter unit 1 Bolte bolt-setting device complete Automatic changeover system between bolt-setting head and welding torch Documentation, manufacturer's declaration Accessories: Functional guarantee. Services available upon request. Delivery date: possible in the short term. Subject to prior sale. The system can be inspected under power near Siegen. Special price if dismantled by the end of September 2026!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Radiant Vision Systems ProMetric I IC-PMI29-XB Imaging Colorimeter High-end industrial imaging colorimeter camera designed for precise luminance and color measurement in demanding applications. This system belongs to the renowned ProMetric I series, widely used in display testing, LED inspection, and automated quality control environments. 29 Megapixel high-resolution imaging colorimeter Accurate luminance and chromaticity measurement Scientific-grade sensor for repeatable and reliable results High sensitivity and wide dynamic range Designed for industrial and laboratory use Compatible with Radiant Vision Systems software (TrueTest) Suitable for integration in automated inspection systems Applications Display testing (LCD, OLED, MicroLED) LED brightness and color validation Surface inspection and uniformity analysis Automotive display and lighting validation Industrial quality control processes Technical Specifications Model: IC-PMI29-XB Resolution: 29 MP (6576 × 4384) Measurement: Luminance & Color (CIE) Interface: USB / Ethernet Made in USA Condition Used unit in very good condition, removed from a professional industrial environment. Fully functional / Untested (adjust based on reality). What’s Included Radiant Vision Systems ProMetric I IC-PMI29-XB Camera Radiant Vision Systems HALCON USB License Dongle (Software Key) Radiant Vision Systems USB Flash Drive Radiant Vision Systems Electronic Component (P/N 10856) Original Protective Carrying Case Accessories as shown in photos Iodpfx Aezwd Hyeltsbb

Condition: used, Year of construction: 2010, Dough Divider and Molder Fortuna Primus K6 Year of manufacture: 2010 Condition: cleaned & inspected Operating hours: approx. 24,500 Output per row: max. 1,200 pieces Maximum total output: 7,200 pieces/hour Weight range: 35-80g Piece weight, molding speed, and molding chamber height can be adjusted manually Pressure roller on spreader belts Flour dispenser at the dough discharge Includes piston set for 4 and 6-row production The Fortuna Primus is a proven dough divider and molder for the best artisanal quality. It is the dough expert for difficult and long-proofed doughs – from soft Berliner dough to firm pretzel dough. Even cool or doughs that tend to stick are processed gently and precisely by the Fortuna Primus. Ibedpfxjz A Srle Alteb Convenient dough input via a hopper with a capacity of 20-25 kg Small amounts of dough are automatically fed to the dividing system via star wheels Thanks to the dough-friendly dividing system, the fermentation cells remain optimally preserved Best conditions for artisanal baked goods of top quality Dough pieces detach easily from the drum, even with extremely soft doughs, without prior addition of flour Easy access to all machine parts for simple cleaning and maintenance

Year of construction: 2017, condition: used, Hobart PROFI UXS-10A Universal Dishwasher Year of manufacture: 2017 Condition: cleaned & inspected, fully functional Product details: Loading height: Can simultaneously wash butcher’s trays, up to 4 bakery trays, up to 8 baking sheets (800 x 600 mm) or large trays (600 x 400 mm). VISIOTRONIC control: One-button operation with remaining cycle time display. SENSO-ACTIVE resource management: The control system continuously monitors the level of soiling in the tank and adjusts the rinse water quantity individually and in real time based on the degree of contamination. POWER wash: Guarantees the removal of even the most stubborn dirt thanks to increased wash pressure. Interface: Convenient export of operating and consumption data via USB. Intelligent energy management: Optimizes the performance of the boiler and tank heater to achieve short heating times even with a low connection value. GENIUS-X² fine filter system: The filter system with integrated pre-wash function reduces the cleaner consumption by up to 35%. ROTOR-X wash system: Cross-jet arms and special impulse nozzles distribute the water optimally and generate maximum wash pressure. CLIP-IN wash and rinse arms: Both wash and rinse arms can be removed without tools. EASY-CLEAN concept: Components that need to be removed for cleaning are clearly marked with color. Filter insert monitoring: The correct placement of the tank cover filter is continuously monitored. Programs: Short, standard, intensive, hygiene, and long wash program. Technical data: Tank volume: 80 liters Ibsdpfx Alsz A Sr Sjtjb Tank heater: 3.3 kW Pump output: 2.9 kW Heater output (factory setting): 12.4 kW Heater output (adjustable): 6.2 kW Total connection value (factory setting): 15.6 kW Total connection value (adjustable): 12.4 kW Noise level: 60 dB

Condition: good (used), Year of construction: 2019, functionality: fully functional, New price including transport and installation approx. €850,000 net. The machine was professionally disassembled by qualified technicians and subsequently stored. An inspection at the location in the Netherlands is possible after prior appointment. Technical data: Manufacturer: SCM Stefani Type: One 108 Cell Year of construction: 2019 Operating hours: approx. 5,600 Feed speed: 10–40 m/min Maximum speed with pickback: 30 m/min Workpiece length: approx. 250–3,000 mm Workpiece width: approx. 130–1,200 mm Workpiece thickness: 10–60 mm Maximum workpiece weight pickback: 80 kg Machine length edge banding machine: approx. 11,550 mm Installation area of the complete cell according to layout: approx. 30,270 × 13,166 mm Working height: approx. 970 mm Connection: 400 V / 50 Hz with neutral conductor Workpiece feed: Motorized feed roller table Easy Order BN+ automatic workpiece feed Automatic alignment for longitudinal and transverse processing Servo-controlled workpiece centering Automatic adjustment to different workpiece dimensions Large lateral workpiece support Edge and glue system: Nordson AltaPUR 4HO PUR hot melt unit Melt-on-demand technology Melting capacity up to approx. 6 kg/h SGP glue reservoir with CNC-controlled glue metering Additional interchangeable SGP glue reservoir Separate preheating trolley for one glue reservoir Isdpez Aquhefx Altjbb Workpiece edge preheating Automatic positioning of the edge guide and pressure rollers 12-position vertical edge magazine with automatic edge changing Processing of roll material up to 3 mm Designed for thin edge, 20° bevel, and radii R1, R1.5 and R2 Machining units: Pre-milling unit RT-H/RT-X with 2 × 4 kW Electronic positioning of the pre-milling unit Trimming unit YU/SP-1000 with automatic saw blade inclination Flush-cutting and pre-milling unit R-E CNC-controlled RSU-E Hi-Drive Multiedge fine milling unit Processing of thin edge and R1, R1.5 and R2 Round 4 four-motor corner rounding unit Automatic selection of four profiles MX80 HSK milling unit with 10 kW CNC-controlled horizontal and vertical positioning Automatic pivoting from 0–90° Suitable for continuous or recessed grooves on the top, bottom and workpiece edge CNC-controlled RCS-E Multiedge radius drawing blade unit Edge sanding unit GT with oscillating sanding belt Two glue seam drawing blade units RCA/2C Polishing unit SP/F with oscillating Riepe polishing pads Spraying devices: Release agent spraying device at the machine infeed Antistatic and coolant spraying device Spraying device for sensitive or foiled edges Cleaning agent spraying devices for the glue seam drawing blades Spraying device for the first pressure roller Automatic pickback return: Gantry return system with three servo-controlled axes Workpiece pick-up via vacuum gripper Automatic rotation by 0°, 90°, -90° and 180° Automatic return to the machine infeed Up to 10 return cycles per minute without rotation Up to 9 return cycles per minute with 90° rotation Motorized conveyor belts Additional second unloading station Central control via the machine control system Location: Netherlands Inspection: possible after prior appointment Condition: professionally disassembled and stored Availability: short notice Price: on request The technical data were compiled based on the available original documents. Errors, changes and prior sale are reserved.

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 500 kg, The machine was purchased during the liquidation of a company. Flowpack machine ITALDIBIPACK Dibiflow 500 – Year of manufacture 2021 – Very good condition For sale is a high-quality flowpack packaging machine from the manufacturer ITALDIBIPACK, model Dibiflow 500, year of manufacture 2021. The machine is in very good, well-maintained condition and is ideal for the efficient packaging of a wide variety of products in tubular bags. Technical data Manufacturer: ITALDIBIPACK S.p.A. Model: Dibiflow 500 Year of manufacture: 2021 Connection: 400V – 3Ph + T + N – 50/60 Hz Power: 4.3 kW Weight: approx. 500 kg Ibedexw S Ixjpfx Altjb Equipment & Features Robust construction High-quality sensors for product and film detection Adjustable guide rails for different product widths Clean, modern control and drive technology Ideal for food, non-food, industrial products and more CE marking Perfectly suited for continuous packaging processes Condition The machine is ready for immediate use and shows only minor signs of wear. The guide systems, rollers, sensors and the entire mechanics are in very good condition (see pictures). Price Negotiable – €13,000 + €4,000 printer

Condition: used, Year of construction: 2000, Wide belt sanding machine Manufacturer: Bütfering Type: Classic 213 EB Year of manufacture: 2000 Technical data The machine underwent a technical inspection in 2016. Working width: 1350 mm Sanding belt width: 1370 mm Sanding belt length: 2620 mm Unit 1 Sanding platen unit Electronically controlled segmented pressure beam in a compact design, element width 25 mm Continuously adjustable pressure at the workpiece edges Drive motor 15 kW Continuously adjustable sanding belt speed, 1.5 - 12 m/s via frequency inverter Unit 2 1 brush unit With motor-driven oscillating brushes Continuously adjustable brush speed, 1.5 - 8 m/s via frequency inverter Rotating cleaning brush on the discharge side of the machine with a separate drive motor 0.55 kW Unit drive with maintenance-free, wear-free electric braking system Program-controlled adjustment of the sanding pressure of the individual segments Optical, non-contact sanding control Pneumatic sanding belt tensioning device Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Iodpfx Asz A S E Ssltobb

Condition: used, Year of construction: 2002, We are offering this used Finnsonic MC-360/III ultrasonic cleaning system, year of manufacture 2002. Ibedpfxjywua Ts Altsb If you have any questions or require further information, please feel free to send us a message or give us a call. The dimensions of the individual tanks are approximately: width 750 mm x depth 600 mm x height 600 mm.