Used Resting Ecg for sale (1,367)

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm Njdpozfnd Sjfx Adpocu turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, mileage: 20 km, power: 125 kW (169.95 HP), first registration: 06/2026, fuel type: diesel, overall weight: 3,225 kg, color: white, gearing type: automatic, number of seats: 3, total length: 5,450 mm, total width: 2,032 mm, total height: 1,967 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, Internal Number: 51996 ---- Errors and prior sale reserved! SPECIAL EQUIPMENT Ncodpfx Adjy R Ia Tepju * Tow bar preparation kit – Electrical pre-installation kit for tow bar – wiring harness, 13-pin socket, and trailer module for retrofitting a trailer hitch * Heated windscreen * 2-zone automatic climate control – with automatic temperature control, individually adjustable for driver and passenger – auxiliary electric heater * Load compartment lighting (LED) – extra bright * Load compartment floor: Vinyl floor covering “Easy Clean” * Inductive charging station for mobile devices * Heated steering wheel * Adaptive Matrix LED headlights – LED low beam including all-weather light – glare-free LED high beam – LED daytime running lights with integrated front LED indicators – static LED cornering light – speed-dependent headlight range control – LED tail lights * Programmable interface for body builder – Interface module for integrating conversion functions via the SYNC touch display includes: – advanced electronic interface module – logic tool allowing upfitters to program their own controls and functions * Sliding doors, right and left * High sidewall cladding incl. rear door trim * Seat Package 17A – Driver's seat, manually adjustable in 8 ways (Ford ergonomic seat) – Fixed double passenger seat with through-loading flap – Seat heating for driver and (outer) passenger seat – Folding tray on passenger seat – Driver’s seat with adjustable armrests inside and outside – 4-way adjustable lumbar support for driver – Side airbags, right and left – Head–shoulder airbags, front, right, and left – Cloth trim Plus Style, central seat section in Black Onyx, the rest in Ebony * Socket: 12-volt outlet in cargo/compartment area * Partition (metal) with window OTHER EQUIPMENT * 2-stage unlocking for passenger/cargo compartment * Electronic ABS with EBD * Passenger airbag * Driver airbag * All-wheel drive * Electrically adjustable and heated exterior mirrors * Exterior mirror housings made of black plastic * H7 AGM single battery * Flat roof * Roof console * Twin rear wing doors (without window), unlockable from 90 degrees up to 168 degrees * Rev counter * Third brake light * ESP * Rubberised driver cabin floor * Vehicle modem – Wi-Fi hotspot 5G modem – Information about the current status or location of the vehicle and control of selected vehicle functions via smartphone with the Ford App – Current real-time traffic information (in combination with navigation system) – Wi-Fi hotspot (up to 5G/LTE, for up to 10 mobile devices) * Front electric windows * Electric parking brake * 8-speed automatic * Glove compartment with lid * Front interior lighting * 55 l fuel tank * Solid paint * Plastic steering wheel * Small centre console * Driver fatigue alert * Emergency call assistant * Technology Package 2: Ford audio system with 13-inch multifunction display and Ford SYNC 4 – Pre-collision assist, camera-based – Fatigue alert, camera-based – Traffic sign recognition system – Wrong-way driver alert – Lane keeping assist incl. lane keeping aid – Front and rear park pilot system – Cruise control – Intelligent speed limiter with speed limit display – Rear view camera * Diesel particulate filter * 4 speakers * Full wheel covers * Tire repair kit * Tire pressure monitoring system * Wheels: Steel 6.5 J x 16 with 215/65 R16 tyres * Gear lever

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Lathe - cycle controled | Brand: FAT-HACO / Type: TUR 800 MN / Year of construction: 2001, General overhaul in 2009, Replacement in 2010 The TUR MN lathe - cycle controled is a combination of a conventional and a CNC lathe. The TUR MN is a production machine for complex parts as a single piece or in small quantities with high precision. The machine can be inspected in the factory under power by appointment. Condition: Fully functional / ready for use. The general overhaul in 2009 included the following work: - Machine completely dismantled, cleaned and remounted, - Maintenance of the gear box, - Machine bed have been grinded, - Upper bed has been scraped by hands, - Measuring and adjusting the headstock - Measuring and adjusting the plan and longitudinal slide Replacement in 2010: Ball screw renewed. TECHNICAL SPECIFICATIONS: - Control: SIEMENS SINUMERIK 840D ManualTurn - Swing diameter over bed max.: 800 mm - Swing diameter over support max.: 480 mm - Distance between centers (turning length)max.: 4.000 mm - Centre height: 250 mm Headstock: - Spindle cone (metric cone): 150 - Bore through the spindle: 140 mm - Spindle speed: 5 - 1.800 rpm - Spindle speed I: 5 -360 rpm at N = const.: 90 - 360 rpm - Spindle speed II: 360 - 1.800 rpm at N = const.: 360 - 1.800 rpm Feeds: Type of the feed drives - servo drives: - Gradient of the leading spindle (Z/X): 10 mm - Range of the longitudinal feeds (Z/X): 0 - 6.000 mm/min - Feed force of the longitudinal feed (Z) max.: 15.000 N - Feed force of the crossfeed (X) max.: 10.000 N - Adjustment range of the cross slide (X): 480 mm - Range of the bedway: 544 mm Cross slide: - Width of the cross slide: 330 mm Tailstock: Nsdpszamkzjfx Adpocu - Permitted workpiece weight max.: 3 tons - Tailstock quill - morse taper: 6 MT - Diameter of the tailstock quill: 125 mm - Tailstock sleeve stroke manuell: 280 mm Drive motor feed rate for X/Z-axis: - Nominal torque Mn = 15,5 Nm - Nominal speed Nn = 3.000 rpm Total power requirement: 39,5 kW Machine weight approx.: 9,3 tons Dimensions of the machine: Length: 8.000 mm (incl. chip conveyor which can be dismantled, then it`s approx. 1.400 mm shorter) Width: 2.500 mm Height: 2.200 mm SPECIFICATIONS / ACCESSORIES: - 1 steady rest, Ø: 30 - 340 mm - Documentation Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: used, Year of construction: 1998, Control Siemens 840 D swing diameter over slide rest 650 mm max. turning speeds 3800 min/-1 spindle diameter in front bearing 150 mm spindle bore 92 mm spindle head A8 DIN55026 number of tool places 2x 12 Pos. tool taper VDI 40 Nedpfxox I Simo Adpocu weight of the machine ca. 7,0 t In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Nominal length: 1500 mm Accesories: - chip conveyor - Felsomat loading system - lathe chuck - milling body There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, input voltage: 400 V, DGUV certified until: 08/2028, total length: 810 mm, total width: 720 mm, total height: 1,610 mm, input frequency: 50 Hz, type of input current: three-phase, For all light / dark rest broths etc. "The universal crusher" stainless steel Performance hrs / 1500 kg dry With pouring ring Ncodpfx Asdg Hn Ujdpsu Screen 3/5/8 and 12 mm (included) Connection 400V, 11 kW, 32A-CEE connector Dimensions: 720 x 810 x 1610mm, WxDxH Ejection height 495

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Nedpfx Aezd Tycodpscu Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

Condition: good (used), Year of construction: 2007, 1 used, very well-maintained high-performance cycle turning machine with FAGOR 8055, 8-position tool turret VDI 40, constant cutting speed, and chip conveyor Manufacturer: MICROTURN, Origin Taiwan Model: Challenger BNC 26160X Year of manufacture: 2007 Technical data: Nsdpfxozfqdnj Adpjcu Center height 325 mm Distance between centers 4000 mm Swinging diameter over bed 650 mm Swinging diameter over cross slide 410 mm Swinging diameter in the gap 870 mm Spindle speeds 0 – 2400 rpm Spindle bore 82 mm Spindle motor 15 / 22 kW Machine dimensions L x W x H 6190 x 2096 x 2050 mm Machine weight 6,800 kg Accessories / Special features: • Cycle control FAGOR 8055 with alphanumeric keyboard o LCD color monitor o Graphical simulation of the cycles o 2 electronic handwheels • 3-jaw chuck • 8-position tool turret VDI 40 • Chip conveyor • 2 fixed steady rests • Automatic lubrication of the headstock • Automatic lubrication of the longitudinal and cross slides • Tailstock with hydraulically actuated quill • Coolant system • Chip conveyor • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2004, Manufacturer: PRB Packaging Nedpfx Adjzg I Umjpocu Model: Destratus Year: 2004   Automated system for removing packs of bottles or cartons from a pallet. The equipment continuously feeds empty bottles to the rest of the line. Light curtain. UniOP control panel. History, documentation, and electrical diagrams available.

Condition: used, Year of construction: 1972, turning diameter over bed 1650 mm turning diameter over slide rest 1350 mm turning length 10000 mm turning speeds 1,4 - 280 U/min greates pass round over bed 1580 mm center height over square guideway 825 mm bed length 13.350 mm bed width 1.120 mm spindle diameter in front bearing 260 mm spindle bore 82 mm upper head travel 500mm tailstock quill diameter 200 mm max. workpiece weight between centres 10.000 kg weight of the machine ca. 25,5 t Power 45 KW The machine is a first-hand purchase, is free from defects and is in very good condition. In 2023, the headstock was overhauled; this included replacing the main spindle bearings, chrome plating and reworking the main spindle and bottom wheel (bearing seat). The guideways are also in very good condition, considering their age. Accessories - Feed guard Equipment - 3-axis digital display - 1 x faceplate Ncsdpfx Adoy S Duvspeu - 1 x roller stand - Chip conveyor (Kabel Schlepp 300/100)

Condition: good (used), turning diameter over bed 380 mm turning diameter over slide rest 250 mm turning length 600 mm turning speeds 90 - 1600 U/min Nedpfezd Hf Sox Adpscu centre height 200 mm total power requirement 4,2 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 2,2 x 0,9 x 1,6 m

Condition: good (used), Year of construction: 2016, functionality: fully functional, HAAS ST-40L CNC lathe, year of manufacture 2016, C-axis, driven tools, tailstock, steady rest, extended bed The machine is equipped with a C-axis, driven tools, programmable tailstock, Kitagawa hydraulic steady rest, chip conveyor, and accessories. Ncsdpfx Aszgv E Hodpsu The machine is powered on and available for testing by appointment. Machine basic specifications: Manufacturer: HAAS Automation, Inc. Model: ST-40L Year of manufacture: 01/2016 Serial number: 3104909 Control system: HAAS CNC Power supply: 3 × 400 V / 50 Hz Machine weight: approx. 14,062 kg Design: extended bed ST-40L Technical parameters: Max. swing diameter over bed: 876 mm Max. turning diameter: 648 mm Max. turning length: 2,032 mm X-axis travel: 432 mm Z-axis travel: 2,032 mm Work travel X/Z: 18 / 8.1 m/min Rapid traverse X/Z: 18 / 8.1 m/min Positioning accuracy: 0.005 mm Repeatability: 0.003 mm Spindle Spindle: A2-8 Spindle bore: 102 mm Spindle bore diameter: 117 mm Max. spindle speed: 2,400 rpm Spindle power: 30 kW / 40 HP Torque: 1,898 Nm at 150 rpm Chuck: hydraulic 3-jaw Kitagawa B15, diameter 381 mm Turret and driven tools Turret: 12-position combined turret Tool clamping: 6× VDI 40 / 6× BOT Driven positions: every other position in the turret Tool drive: yes C-axis in the spindle: yes Max. speed of driven tools: 0–6,000 rpm Power of driven tools: 9.3 kW C-axis positioning: 0.001° Continuously controlled C-axis in the spindle: yes Tailstock and steady rest Programmable tailstock: yes, servo-controlled Tailstock taper: MK5 Tailstock clamping force: 1,334–6,672 N Hydraulic steady rest: Kitagawa 1131 Steady rest range: 110–310 mm Separate oil lubrication for the steady rest: yes Max. steady rest speed: 650 rpm Max. clamping force of the steady rest roller: 20 kN Machine equipment The machine is equipped with: HAAS CNC control system, C-axis, driven tools, 12-position turret with 6× VDI / 6× BOT, programmable tailstock, Kitagawa 1131 hydraulic steady rest, Kitagawa B15 hydraulic chuck, chip conveyor, cooling unit, automatic central lubrication, manual spray gun for coolant, manual air blow gun, remote jog handle, USB port, work area lighting, set of tool holders and accessories. Accessories The machine comes with accessories as shown in the photos, including: ER32 driven tool holders, VDI/BOT tool holders, set of hard jaws for Kitagawa B15 chuck, additional jaws, sleeves and clamping elements. Operating hours According to the display on the control system: Cycle start time: approx. 7,208 h Cutting time with feed: approx. 5,989 h Machine condition The machine is currently in operation and powered on. Inspection and testing are possible by appointment. The technical condition corresponds to the normal operation of a used machine.

Condition: used, Year of construction: 1996, core drilling diameter max. 25 mm bore depth 1000 mm swing diameter mm total power requirement 25 kW weight of the machine ca. 12,5 t dimensions of the machine ca. m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 _____ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Njdpet Hw Ayjfx Adpscu Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Condition : Very good condition. This is a rare and valuable machine. Under Power Delivery : immediately ex our Stock Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1965, core drilling diameter max. 50 mm bore depth 2000 mm swing diameter mm drilling capacity diameter max. 110 mm total power requirement 30 kW weight of the machine ca. 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Nsdpfet Hwucjx Adpjcu Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features * Machine consists of the following elements: Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. * 2 closed 3-point steady rests. * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories!

Condition: used, O F F E R We can offer you ex stock, subject to prior sale and errors: TSCHUDIN (CH) Centerless cylindrical grinding machine Model TC-300 Year of manufacture 2001 Grinding range – Ø 0.5 – 25 mm (30) Max. workpiece length for plunge grinding 125 mm (140) Max. workpiece length for through-feed grinding 300 mm Ncsdpfx Aswftt Uedpeu Grinding wheel dimensions: Ø x width Ø 300 x 125 mm (140) Regulating wheel dimensions: Ø x width Ø 225 x 125 mm (140) Grinding wheel peripheral speed 35 m/sec Grinding wheel infeed 3 mm Regulating wheel speeds, steplessly adjustable 0 – 444 rpm Regulating wheel inclination Degrees Grinding wheel drive approx. 7.5 kW Total connected load approx. 13 kW – 380 V – 50 Hz Weight 2,500 kg Accessories / Special equipment: • The machine operates with a fixed workpiece position, allowing both the grinding spindle and the regulating spindle units to be adjustable. This simplifies machine setup as well as automatic workpiece loading and unloading. • SIEMENS PLC control for automatic operation with SIEMENS touchscreen. Complete electrics and PLC control renewed in 2016! • Electromechanical profile dressing device for the regulating wheel • Regulating and grinding wheel speeds are steplessly adjustable. • Adjustable plunge guide bridge with mounted plunge workpiece rest • Electromechanically controlled workpiece pusher & automatic pneumatic workpiece ejector • Additional outfeed cylinder for automatic tilting of workpieces after plunge grinding (adjustable 4–30 mm) • Machine is prepared for use with a HELP-TEC bar loader MSHL08/400P, which is currently not present. • Complete enclosure of working area with monitoring technology • Separate control cabinet, operating and electrical manuals for the retrofit Condition: Very good! Fitted with new electronics in 2016! Click here for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – after receipt of invoice Always a large selection of grinding machines in stock – please inquire for your requirements!

Condition: like new (used), Year of construction: 2024, functionality: fully functional, turning length: 1,275 mm, turning diameter: 481 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 26 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,907 mm, total length: 5,300 mm, total width: 2,105 mm, type of input current: three-phase, overall weight: 6,900 kg, spindle nose: ASA 11, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​2-axis CNC lathe "DN Solutions model PUMA GT3100L" with DN Solutions-Fanuc i-Plus iHMI CNC complete with chip conveyor, Morari self-centering steady rest with 15-170mm opening, automatic doors, 12-position turret, auto power off and tool life management. Nedpfx Aewuti Ujdpocu

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available with distance between centers also 2000 and 3000 mm. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 280 mm Max. diameter over bed 560 mm Max. diameter over carriage 360 mm Max. diameter over pocket 770 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1400 x 1500 mm Net weight 2920 Kg Gross weight 3555.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Nodovbquispfx Adpecu Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available in stock subject to prior sale. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 385 mm Max. diameter over bed 770 mm Max. diameter over carriage 575 mm Max. diameter over pocket 1050 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1550 x 1700 mm Net weight 3250 Kg Gross weight 3250.00 kg Ncjdpfx Adovbqlhspeu Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: new, Showroom promotion... NEW, unit No. 1 available for immediate delivery. CE certified. The MACC SPECIAL 335 MS is a semi-automatic bandsaw for cutting solid bars and small-sized profiles, offering high performance and excellent precision. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. The bandsaw drive is equipped with a two-speed motor and a special gearbox complete with a bronze gear, hardened, and ground worm screw. The appropriately sized flywheels and robust bandsaw guides are made with sealed ball bearings and adjustable Widia inserts. Using an electromechanical microswitch control, the bandsaw can be tensioned with the rotation of the blade. Equipped with a safety device on the flywheel cover and the blade, the machine is completed with a rotating table for supporting the material and a vice with a quick-feed device. Operation: Starting the cutting cycle via the start button, the machine: 1. closes the vice and activates the bandsaw motor; 2. lowers the saw arm for cutting; 3. the saw arm returns to the starting position; 4. stops the bandsaw motor; 5. opens the vice. Manual cutting is also possible. Cutting speed (m/min): 38-77. Cutting thickness (mm): 1.2. Cutting range: 45° left, 60° right. Stop for cutting the same size: adjustable. Electric pump for bandsaw cooling: 0.06 kW. Cutting capacity at 0° (round, square, rectangular): 260 / 250x250 / 220x330. Cutting capacity at 45° left (round, square, rectangular): 225 / 210x210 / 160x225. Cutting capacity at 45° right (round, square, rectangular): 215 / 200x200 / 160x210. Cutting capacity at 60° right (round, square, rectangular): 130 / 130x130 / 130x140. Blade dimensions: 3010x27x0.9. Weight [kg]: 415. Nsdog S Ui Aspfx Adpscu

Condition: new, Parallel lathe with display Fervi T075/400V3A. Monoblock cast iron base. Height of Centers 230 mm Max. diameter on Bench 460 mm Max. diameter on Carriage 270 mm Max. diameter on Slot 690 mm Tool Height 25 mm Distance between Centers 1500 mm Distance between Guides 300 mm Bar Taper CM MT7 Bar Passage 58 mm Spindle Attachment Camlock D1-8 Spindle Speed (12)25-1700 rpm Longitudinal Feeds (42) 0.031 - 1.7 mm/rev Cross Feeds (42) 0.014 - 0.784 mm/rev Metric Threads (41) 0.1 - 14 mm Inch Threads (60) 2 - 112 TPI Tailstock Spindle Stroke 130 mm Tailstock Taper CM MT4 Motor 400 V 50 Hz 5.5 kW Njdpfovbqv Hsx Adpscu Coolant Pump 400 V 50 Hz 90W Machine Dimensions 2750 x 1080 x 1370 mm Net Weight 2020 kg Total Dimensions 2870 x 1180 x 1570 mm Gross Weight 2200 kg Accessories Included: 3-jaw self-centering chuck Ø250 mm / D1-8 4-jaw self-centering chuck Ø300 mm / D1-8 Drive flange Ø350 mm Fixed steady rest Moving steady rest Reduction bushing CM 7 / 4 Fixed tailstock CM 4 Rotary tailstock CM 4 Thread comparator Turret guard Spindle guard Rear splash guard Quick change turret type B LED lamp Cooling system Electromechanical foot brake Bathed carriage gears oil Quick-lock tailstock carriage

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Possibility of 2000 and 3000 mm distance between centers. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Center height 330 mm Max. diameter over bed 660 mm Max. diameter over carriage 420 mm Max. diameter over pocket 870 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50 Hz 7.5 kW Coolant pump 400V 50 Hz 90 W Dimensions 3000 x 1400 x 1600 mm Net weight 3330 Kg Accessories included: Self-centering chuck with 3 reversible jaws Ø320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C Ncodpfx Adsvbqt Sjpju LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: used, mileage: 32 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,150 kg, first registration: 06/2026, emission class: euro6, color: white, number of seats: 9, total length: 5,050 mm, total width: 2,275 mm, total height: 2,040 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 34235 Subject to errors and prior sale! ---- OPTIONAL EQUIPMENT * Electrically adjustable, heated, and folding exterior mirrors * Electric tow bar preparation kit (wiring harness and tow module) * 2nd row windows: Quarter windows in the side windows * Ford Key Free system - including Ford Power start function * Lockable glove compartment with lid Njdjwi Dfpopfx Adpscu * 70 l fuel tank * Inductive charging station for mobile devices - Qi standard * LED headlights - LED high beam - LED low beam - LED daytime running lights including integrated LED front indicators - Static cornering lights - High Beam Assist * Radio: Ford audio system with 13-inch multifunction display and Ford SYNC 4 including navigation - DAB/DAB+ - FordPass Connect - 13-inch TFT multifunction display - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink (wireless) and touchscreen - Amazon Alexa Built-in Voice Assistant ADDITIONAL EQUIPMENT * 2 grab handles on the driver and passenger side * 2-stage unlocking for the passenger compartment and cargo area * ABS (Anti-lock Brake System) * Electrically adjustable and heated exterior mirrors * Exterior mirror housings made of black-gray plastic * Rubber-coated floor, full-length * Roof console * Double rear door * Tachometer * Third brake light (with LEDs) * ESP - Hill Start Assist - Safety Brake Assist - Traction Control * Electric front windows with quick-down/up function for the driver's side * Electronic parking brake * FordPass Connect - Wi-Fi hotspot with 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windshield * Glove compartment with lid * Heated rear window - fixed * Rear window wiper * Interior lighting in the passenger compartment * Interior lighting, front * Automatic climate control, front * Cargo area lighting (LED) * Plastic steering wheel * Small center console * Driver Alert System * eCall Emergency Call Assist * Package: Technology Package 2 (Trend): Ford audio system with 13-inch multifunction display and Ford SYNC 4 - Camera-based Pre-Collision Assist - Driver Alert System - Traffic Sign Recognition System - Wrong-Way Driver Warning - Lane Assist including Lane Keeping Assist - Front and rear Parking Sensors - Cruise Control - Intelligent Speed Limiter with speed limit display - Rearview camera * Front and rear Parking Sensors * Diesel Particulate Filter (DPF) with SCR catalyst * Radio accessories: 10 speakers * Tire repair kit * Tire pressure monitoring system * Wheels: 6.5 J x 16 steel wheels with 215/65 R 16 tires * Sensico leather-look gear knob * Rain-sensing windshield wipers * Headlights with LED low beam headlights - including high beam assist * Sliding door, right * Mud flaps, front and rear * Fixed side windows, third row, right and left * Fixed side windows, second row, right and left * Half-height side panel trim * Power steering * Front seat belts * Seats: Rear Seat Package 3 - 2nd row with 3 individual seats - 3rd row with 3-seater bench seat * Seat Package 11A: Driver's seat, 4-way manually adjustable - Passenger double seat, fixed - Driver and passenger headrest - Driver's lumbar support - Passenger airbag - Side airbags, right and left - Curtain airbags, front, right and left - Plus Style fabric upholstery, seat center panel in Black Onyx, rest in Ebony * Start-stop system * Power outlet: 12-volt connection in the cargo/passenger compartment * Front and rear bumpers partially in body color

Condition: used, mileage: 20 km, power: 125 kW (169.95 HP), first registration: 06/2026, fuel type: diesel, overall weight: 3,225 kg, color: black, gearing type: automatic, number of seats: 3, total length: 5,450 mm, total width: 2,032 mm, total height: 1,976 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, Internal number: 21927 ---- Errors and prior sale excepted! SPECIAL EQUIPMENT * Fixed tow bar * 70 l fuel tank * Metallic paint * Technology Package 6: Exterior mirrors with integrated indicators, electrically adjustable, heated, and foldable * Audio system with 13-inch multifunction display, Ford SYNC 4 including navigation and Blind Spot Assist incl. CTA rear emergency braking assistant, Pre-Collision Assist, camera and radar-based driver alert, Lane Keeping Assistant and Lane Change Assistant, Traffic Sign Recognition, Wrong-Way Driver Warning, Front and rear Park Pilot System, Adaptive Cruise Control with Stop&Go * 360-degree camera system * Sensico steering wheel in leather look * Wheels: All-season tires (winter-approved) R16. The tires are marked with the "3 Peak Mountain Snow Flake (PMSF)" symbol, making them certified for winter use. ADDITIONAL FEATURES * 2-stage unlocking passenger compartment/cargo area * Electronic ABS with EBD * Driver's airbag * Exterior mirror housings in black-grey plastic * Battery: H7 AGM single battery * Flat roof * Roof console * Double rear wing doors (without window), 90 degrees, unlockable up to 168 degrees * Tachometer * Third brake light * Electronic safety and stability program (ESP) – Hill start assist – Emergency Brake Assist (EBA) – Traction Control System (TCS) * Electric front windows * Electronic parking brake * Heated windscreen * Rubber floor mats (front) * Transmission: 8-speed automatic * Grab handles (driver and passenger side) * Lockable glove box lid * Front interior lighting * Automatic climate control * Headrests (3) * Load compartment lighting (LED) * Small center console * eCall emergency call assistant for transmitting an emergency call in case of an accident or manual activation * Particle filter: Diesel particulate filter * Radio accessories: 4 speakers * Full wheel covers * Tire repair kit * Tire pressure monitoring system * Wheels: Steel 6.5J x 16 with 215/65 R16 * Gear lever on steering column * Rain sensor wipers * LED dipped beam headlights * Sliding door rear, right * Rear mud flaps * Front mud flaps * Power steering * Seat belts * Seat Package 11A – Driver's seat, 4-way manual adjustment – Dual passenger seat with through-loading hatch, fixed – Lumbar support for driver – Plus Style fabric upholstery, seat center panel in Black Onyx, rest in Ebony * Start-stop system * Ford Power start function Nsdpfxoynqdnj Adpjcu * Front and rear bumper partially painted in body color * Partition wall (metal) without window * Door handles in black-grey plastic * Recirculation heater * 8 tie-down points * Immobilizer * Heat-insulating glass, lightly tinted * Central locking with remote control ... and much more. ---- Single ownership. German specification. Subject to errors and prior sale. 2 years’ manufacturer warranty from initial registration (extendable upon request). We are happy to accept your vehicle as a trade-in. Financing/Leasing available even without down payment! Any questions? We are happy to advise you! As, despite existing checks, deviations of the vehicle from the above description cannot be completely ruled out, please note that this vehicle description serves only for the general identification of the vehicle and does not constitute a warranty as defined by sales law. The terms stated in the order confirmation or purchase contract alone are binding. The exact equipm

Condition: used, mileage: 32 km, power: 81 kW (110.13 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,150 kg, first registration: 06/2026, emission class: euro6, color: white, number of seats: 9, total length: 5,050 mm, total width: 2,275 mm, total height: 1,959 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 07099 Subject to errors and prior sale! ---- OPTIONAL EQUIPMENT * Rear air conditioning * 70 l fuel tank ADDITIONAL EQUIPMENT * 2 grab handles on driver and passenger side * 2-stage unlocking for passenger compartment and cargo area * ABS * Electrically adjustable and heated exterior mirrors * Rubberized floor, full length of vehicle * Roof console * Double rear door * ESP - Hill Start Assist - Safety Brake Assist - Traction Control * Electric front windows with quick-down/up function for driver side * Electronic parking brake * Ford Power start function * FordPass Connect - Wi-Fi hotspot with 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windshield * Lockable glove compartment with lid * Heated rear window - fixed * Interior lighting in the passenger compartment * Interior lighting, front * Cargo area lighting (LED) * Plastic steering wheel * Small center console * Driver Alert System * eCall Emergency Call System Njdpfewfviljx Adpjcu * Package: Technology Package 2 (Trend) - Ford audio system with 13-inch multifunction display and Ford SYNC 4 - Camera-based Pre-Collision Assist - Driver Alert System - Traffic Sign Recognition System - Wrong-Way Driver Alert - Lane Assist including Lane Keeping Assist - Front and rear Parking Sensors - Cruise Control - Intelligent Speed Limiter with speed limit indicator - Rear view camera * Front and rear Parking Sensors * Particulate filter: Diesel Particulate Filter (DPF) with SCR catalyst * Radio: Ford audio system with 13-inch multifunction display and Ford SYNC 4 - DAB/DAB+ - FordPass Connect including live traffic information and Wi-Fi hotspot - 5G modem - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and Touchscreen - Amazon Alexa Built-in Voice Assistant * Radio accessories: 10 speakers * Tire repair kit * Tire pressure monitoring system * Wheels: 6.5 J x 16 steel wheels with 215/65 R 16 tires * Sensico leather-look gear knob * Windshield wipers with rain sensor * Headlights with LED low beam - including high beam assist * Sliding door, right * Fixed side windows, second and third row, right and left * Half-height side panel trim * Power steering * Front seat belts * Seats: Rear Seat Package 3 - 2nd row with 3 individual seats - 3rd row with 3-seater bench seat * Seat Package 11A - 4-way manually adjustable driver's seat - Fixed passenger double seat - Driver and front passenger headrest - Driver's lumbar support - Passenger side airbag - Right and left side airbags - Head/shoulder airbags, front, right and left - Plus Style fabric upholstery, seat center panel in Black Onyx, rest in Ebony * Start-stop system * Power outlet: 12-volt connection in the cargo/passenger compartment * USB port for the 2nd row of seats * Recirculating air heating * 2 tie-down points * Immobilizer * Heat-insulating glass, light tint throughout * Central locking with remote control - additionally with a second key, with remote control ... and much more. ---- ...

Condition: used, mileage: 32 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,150 kg, first registration: 06/2026, emission class: euro6, color: white, number of seats: 9, total length: 5,050 mm, total width: 2,275 mm, total height: 2,040 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 27674 Subject to errors and prior sale! ---- Ncjdpfx Adjwi Dgaopeu OPTIONAL EQUIPMENT * Electrically adjustable, heated, and folding exterior mirrors * Electric tow bar preparation kit (wiring harness and tow module) * 2nd row windows: Quarter windows in the side windows * Ford Key Free system - including Ford Power start function * Lockable glove compartment with lid * 70 l fuel tank * Inductive charging station for mobile devices - Qi standard * LED headlights - LED high beam - LED low beam - LED daytime running lights including integrated LED front indicators - Static cornering lights - High Beam Assist * Radio: Ford audio system with 13-inch multifunction display and Ford SYNC 4 including navigation - DAB/DAB+ - FordPass Connect - 13-inch TFT multifunction display - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink (wireless) and touchscreen - Amazon Alexa Built-in Voice Assistant ADDITIONAL EQUIPMENT * 2 grab handles on the driver and passenger side * 2-stage unlocking for the passenger compartment and cargo area * ABS (Anti-lock Brake System) * Electrically adjustable and heated exterior mirrors * Exterior mirror housings made of black-gray plastic * Rubber-coated floor, full-length * Roof console * Double rear door * Tachometer * Third brake light (with LEDs) * ESP - Hill Start Assist - Safety Brake Assist - Traction Control * Electric front windows with quick-down/up function for the driver's side * Electronic parking brake * FordPass Connect - Wi-Fi hotspot with 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windshield * Glove compartment with lid * Heated rear window - fixed * Rear window wiper * Interior lighting in the passenger compartment * Interior lighting, front * Automatic climate control, front * Cargo area lighting (LED) * Plastic steering wheel * Small center console * Driver Alert System * eCall Emergency Call Assist * Package: Technology Package 2 (Trend): Ford audio system with 13-inch multifunction display and Ford SYNC 4 - Camera-based Pre-Collision Assist - Driver Alert System - Traffic Sign Recognition System - Wrong-Way Driver Warning - Lane Assist including Lane Keeping Assist - Front and rear Parking Sensors - Cruise Control - Intelligent Speed Limiter with speed limit display - Rearview camera * Front and rear Parking Sensors * Diesel Particulate Filter (DPF) with SCR catalyst * Radio accessories: 10 speakers * Tire repair kit * Tire pressure monitoring system * Wheels: 6.5 J x 16 steel wheels with 215/65 R 16 tires * Sensico leather-look gear knob * Rain-sensing windshield wipers * Headlights with LED low beam headlights - including high beam assist * Sliding door, right * Mud flaps, front and rear * Fixed side windows, third row, right and left * Fixed side windows, second row, right and left * Half-height side panel trim * Power steering * Front seat belts * Seats: Rear Seat Package 3 - 2nd row with 3 individual seats - 3rd row with 3-seater bench seat * Seat Package 11A: Driver's seat, 4-way manually adjustable - Passenger double seat, fixed - Driver and passenger headrest - Driver's lumbar support - Passenger airbag - Side airbags, right and left - Curtain airbags, front, right and left - Plus Style fabric upholstery, seat center panel in Black Onyx, rest in Ebony * Start-stop system * Power outlet: 12-volt connection in the cargo/passenger compartment * Front and rear bumpers partially in body color

Condition: used, mileage: 32 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,150 kg, first registration: 06/2026, emission class: euro6, color: white, number of seats: 9, total length: 5,050 mm, total width: 2,275 mm, total height: 2,040 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 34212 Subject to errors and prior sale! ---- OPTIONAL EQUIPMENT * Electrically adjustable, heated, and folding exterior mirrors * Electric tow bar preparation kit (wiring harness and tow module) * 2nd row windows: Quarter windows in the side windows * Ford Key Free system - including Ford Power start function * Lockable glove compartment with lid * 70 l fuel tank * Inductive charging station for mobile devices - Qi standard * LED headlights - LED high beam - LED low beam - LED daytime running lights including integrated LED front indicators - Static cornering lights - High Beam Assist * Radio: Ford audio system with 13-inch multifunction display and Ford SYNC 4 including navigation - DAB/DAB+ - FordPass Connect - 13-inch TFT multifunction display - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink (wireless) and touchscreen - Amazon Alexa Built-in Voice Assistant Nedpfewi Df Asx Adpocu ADDITIONAL EQUIPMENT * 2 grab handles on the driver and passenger side * 2-stage unlocking for the passenger compartment and cargo area * ABS (Anti-lock Brake System) * Electrically adjustable and heated exterior mirrors * Exterior mirror housings made of black-gray plastic * Rubber-coated floor, full-length * Roof console * Double rear door * Tachometer * Third brake light (with LEDs) * ESP - Hill Start Assist - Safety Brake Assist - Traction Control * Electric front windows with quick-down/up function for the driver's side * Electronic parking brake * FordPass Connect - Wi-Fi hotspot with 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windshield * Glove compartment with lid * Heated rear window - fixed * Rear window wiper * Interior lighting in the passenger compartment * Interior lighting, front * Automatic climate control, front * Cargo area lighting (LED) * Plastic steering wheel * Small center console * Driver Alert System * eCall Emergency Call Assist * Package: Technology Package 2 (Trend): Ford audio system with 13-inch multifunction display and Ford SYNC 4 - Camera-based Pre-Collision Assist - Driver Alert System - Traffic Sign Recognition System - Wrong-Way Driver Warning - Lane Assist including Lane Keeping Assist - Front and rear Parking Sensors - Cruise Control - Intelligent Speed Limiter with speed limit display - Rearview camera * Front and rear Parking Sensors * Diesel Particulate Filter (DPF) with SCR catalyst * Radio accessories: 10 speakers * Tire repair kit * Tire pressure monitoring system * Wheels: 6.5 J x 16 steel wheels with 215/65 R 16 tires * Sensico leather-look gear knob * Rain-sensing windshield wipers * Headlights with LED low beam headlights - including high beam assist * Sliding door, right * Mud flaps, front and rear * Fixed side windows, third row, right and left * Fixed side windows, second row, right and left * Half-height side panel trim * Power steering * Front seat belts * Seats: Rear Seat Package 3 - 2nd row with 3 individual seats - 3rd row with 3-seater bench seat * Seat Package 11A: Driver's seat, 4-way manually adjustable - Passenger double seat, fixed - Driver and passenger headrest - Driver's lumbar support - Passenger airbag - Side airbags, right and left - Curtain airbags, front, right and left - Plus Style fabric upholstery, seat center panel in Black Onyx, rest in Ebony * Start-stop system * Power outlet: 12-volt connection in the cargo/passenger compartment * Front and rear bumpers partially in body color