Used Rmg 89 for sale (814)

Condition: good (used), We have a large quantity of used conveyor belts for sale. Belt width: 500 mm Overall width: 620 mm Manufacturer: Vanderlande Price per linear meter: 300 euros Drive module: 1500 euros If interested, please contact us. Iisdpfx Aisiyp H Uoyog Other dimensions are available upon request.

Condition: refurbished (used), functionality: fully functional, load capacity: 16 kg, controller manufacturer: Kuka, controller model: KRC2 / 4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! Iiodpfx Aerqgb Ioiyog If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: good (used), Year of construction: 1998, Stacking machine from pallet Ijdorc Drbepfx Aiyeig

Condition: good (used), Year of construction: 1998, sa. 3x belt conveyor, Transnorm, approx. 0.90m long - second-hand - Price per piece ex location (net): only 595.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos88+89+90 Manufacturer: Transnorm Type: TS 1100 Belt conveyor Year of construction: 1998 Length: approx. 0,90m Iedpfxou Ez Avs Aiyeig Belt width: approx. 50cm Element width: approx. 60cm Motor: SEW Condition: good Available immediately Location: CZ, Bor, later warehouse Frankenberg / Saxony

Condition: used, Technical details: floor-plate length: 5600 mm plate width: 1890 mm plate height: 1. 335 2, 390 3, 370 mm weight of the machine ca.: 9,0 pro Platte t transport dimensions LxWxH: 5,6 x 1,89 x 335 (390) (370) m Iijdpfju Rl Ugsx Aiyjg 3 clamping plates (price per plate) Weights: No. 1 = 8000kg; No. 2 = 9000kg; No.3 = 8500kg Material: Cast iron T-slots according to DIN 650 Slots lengthwise Number 6 Size a=36mm,h=64mm,b=60mm,c=25mm Center distance 315mm Through-hole Number 23 Size D=130 i.D. *

Condition: used, empty load weight: 8,648 kg, maximum load weight: 29,352 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2019, next inspection (TÜV): 04/2025, loading space length: 13,403 mm, loading space width: 2,460 mm, loading space height: 2,700 mm, loading space volume: 89 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2019, Equipment: ABS, Poids à vide: 8648kg, Poids total admissible: 38000kg, Espace de charge (L L H): 13.403 mm x 2.460 mm x 2.700 mmLa taille du pneu: 385/65 R22.5, Volume espace de charge: 89 m³, 1er essieu: , 2ème essieu: , 3ème essieu: , Suspension pneumatique, Dispositif anti- encastrement, Système de freinage électronique EBS, Porte-extincteur, Porte roue de secours (2x), Châssis boulonné, Portes battantes conteneur, Enregistreur de température, Fiche de raccordement 1x15 et 2x7 broches, Anti-spray, Scellés douaniers internationaux, Système de télématique, Disques de frein Essieu 1 reste 43,5 mm Plaquettes usure 40%Disques de frein Essieu 2 reste 43,5 mm Plaquettes usure 40%Disques de frein Essieu 3 reste 43,5 mm Plaquettes usure 40%Mines : 04/2025 -, Vous trouverez un aperçu de tous nos véhicules disponibles sur notre site web . Besoin d’un financement ? Nous proposons des financements individualisés, ainsi que du full-service ou un service télématique.Nous serons heureux de vous conseiller personnellement. Iiodeu Sdunopfx Aiyog

Condition: used, Year of construction: 2004, Technical details: Iedpfsu Nvclsx Aiyeig rated capacity: 60 kVA control: Modulsteuerung type of fuel: Biogas weight of the machine ca.: 1,9 t dimensions L x W x H: 2,9 x 1,4 x 1,9 m output: 55 KW Functionality unknown. The generator is sold as a spare part donor at a very reasonable price! Ambient temperature 221°F / 105° C Operation via control panel on the control cabinet door. Base frame is a steel construction on which the generator is mounted. Hour counter digital Engine: -4-cylinder; Liebherr type G 924 TI, turbo with intercooling; speed 1,500 rpm. Generator: -VEM Motors; 400 V / 690 V, speed 1,555 rpm; power max. 75 hp / 55 kW. Gas mixer: -RMG Regel- Messtechnik GmbH; type RMG 983-100/50 *

Condition: used, hydraulic cylinder for ATLAS loading crane Iijdpfx Aieh N D U Djyeg stroke 750 mm piston rod 125 mm outside diameter cylinder tube 235 mm piston diameter approx. 200 mm length retracted middle - middle of bolt 1,100 mm bolt diameter cylinder tube 80 mm width of holder 245 mm bolt diameter 100 mm both bolt holders with plain bearings original Atlas spare parts number 4189526 width of piston rod holder 130 mm weight approx.  330 kg / unit original price approx. ? 9,500.00 *- new - * *- 2 units on stock - price per unit -*

Condition: ready for operation (used), IN STOCK - Iijdpfeir E R Asx Aiyeg 2 up kit to suit Muller Martini three knife trimmer 217/DSS/890

Condition: used, BITZER screw compressors CSH9891-240Y 40 d, R134a, R404a, R407A/C/F, R507, ss, good condition. Iedpjb Itipefx Aiyoig

Condition: reconditioned (used), modernized machine with new LTG StoreControl L control system currently 6 identical machines available Iiodpfx Aisd Sphijysg External dimensions: Overall height 4889 mm Overall width 2785 mm Overall depth 2810 mm Total load capacity of the machine up to 2 x 15,000 kg 63 supports with a central web for up to 400 kg load each in the clear internal dimensions: W = 2460 mm D = 825 mm Usable height up to 55 to 750 mm Start of the opening at 875 mm above floor level, then 875 mm high Motor power: Vertical drive 6 kW / 400 Volt Horizontal drive 0.55 kW / 400 Volt Color: gray/blue Surface cleaned, signs of use possible Subject to errors and technical changes, as well as minor deviations in photos. Delivery and installation are currently mainly in Germany, Austria, and several neighboring countries.

Condition: new, Year of construction: 2026, Technical specifications: • Conforms to H-2 standard • Extraction capacity ~ 8900 m3/h • Motor power 7.5 kW • Speed 3000 rpm • Voltage 400V, 50Hz • Suction connection 300/200 mm • Speed 28m/sec. • Number of filters 45 • Dimensions 921 x 2342 x 2304 mm • Weight 500kg • Category of filters G • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via a pipe • Filter area 22 m2 Delivery: - Fulfill H-2 Norms - 5 micron polyester filter - Fire extinguisher - 2 containers - Running gear - Filter cleaning using a controlled vibration system + 850 euros for the models with fire extinguisher (Safe System) + 850 euros for the models with inverter (speed control) Iiedpfx Aijd H Rdvsyeg

Condition: good (used), Year of construction: 2019, conveyor Robotunits 1500x190mm year: 2019 price: 1.200 € Ijdpfx Aisqnvlweyoig contact: Mr. Rainer Eckerle

Condition: used, Year of construction: 2007, Data sheet of retrofit POS. GE 40.40 Gebhardt roller conveyor (without drive), FB = 450 mm, 8.900 mm = FL Type: Gebhardt roller conveyor type 330.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: 14 kg/m = G Length: FL = 8.900 mm Conveyor width: FB = 450 mm Overall width B = FB + 60: B = 510 mm Side profile: Aluminium Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Support: ask without support, if needed Condition: functional and visually good condition Iijdek Aa Dhepfx Aiyog Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: ready for operation (used), Heidenhain ERN 120 5000 01-03 rotary encoder: 589 611-3C, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iiedpji Eah Hsfx Aiyeg

Condition: new, Parker NV41248969/CDDHMIRNS27 hydraulic cylinder, MC-M1113, unused, 100% functional, scope of delivery as shown in the photos. Isdpfx Aoi Ecc Aeiyeig

Condition: used, functionality: fully functional, Agilent 6890GC Autosampler + Software. Agilent 6890 offers a complete selection of inlets: split/splitless, purged-packed, cool on-column, PTV, and volatiles interface A wide selection of the most sensitive detectors including flame ionization (FID), thermal conductivity (TCD), NPD, micro-ECD, MSD. Equipped with Electronic Pneumatics Control (EPC) feature The Agilent 6890 series GC (Gas Chromatography system) sometime referred to as the HP 6890. It is considered as one of the best Gas Chromatograph (GC) systems today which produces excellent results for various research laboratory applications including hydrocarbon processing, food safety, pesticide determination, chemical analysis, biodiesel, drug screening, toxicology, environmental and law enforcement. The Agilent 6890 has on-board sensors that automatically compensate for ambient temperature changes and barometric pressure differences. These sensors allow for more accurate and reproducible results. The EPC feature of the Agilent 6890 GC series improves laboratory productivity and reduces recalibration frequency. Each EPC unit is optimized for intended use. Overall thermal performance of the Agilent 6890 GC provides optimal chromatography including peak symmetry and retention index accuracy while delivering fast results. The Agilent 6890 GC is capable of producing accurate temperature readings with outstanding retention time repeatability, which is the basis for all chromatographic measurement. Good working condition. Please check out our other listings as well. Iisdpfxouax Tls Aiyjg

Condition: ready for operation (used), Indramat MAC112C-0-HD-3-C/130-A-0 servo motor SN: 68896,used, strong signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iijdpfxsttpm Se Aiysg

Condition: good (used), workbench, work table, assembly bench -Workbench: with conductive tabletop and drawer unit -Width: 1500 mm -Depth: 750 mm -Height: 780 mm -Drawers: 5 -Tabletop: with Anka-Plast coating -Number: 13 workbenches available Ijdpeb A Iztefx Aiyjig -Price: per piece -Weight: 89 kg/unit

Condition: good (used), approx. 270 upholstered trolleys - used - : Price per item from location: €99 (net)! PW240 Manufacturer: Cordes: Type: unknown Iijdpfx Aievzlkleyeg Year of manufacture: unknown - used - as new, unused, only stored back and forth - approx.: W 240 - 300 x D 89 x H 123 cm - extendable -> 300 cm - light blue - 4x plastic swivel castors can be picked up with a pallet truck foldable - upholstered/suitcase trolley boxed Condition: good Available: immediately Location: 2630 Aartselaar Belgium

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 11/2004, total length: 12,000 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, wheelbase: 8,000 mm, color: other, Year of construction: 2004, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes - Lift Axle - SAF Assen = More information = Iisdpfezxnfcjx Aiyjg Axle configuration Tyre size: 385/65 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Weights Empty weight: 6.890 kg Carrying capacity: 23.110 kg GVW: 30.000 kg Maintenance APK (MOT): tested until 03/2027 Identification Registration number: OH-89-SN

Condition: ready for operation (used), Year of construction: 2025, operating hours: 600 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 225 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 800 mm, spindle motor power: 18,500 W, total height: 2,365 mm, total width: 2,085 mm, overall weight: 8,900 kg, controller manufacturer: FANUC, controller model: 0iTF PLUS, product length (max.): 4,210 mm, number of axes: 5, This 5-axis Leadwell LTC-25iSMY was manufactured in 2025. It features a maximum turning diameter of 590 mm and a turning length of 770 mm. The machine is equipped with a powerful spindle speed of 3500 rpm and a robust tool head with 12 positions. If you are looking to get high-quality turning capabilities, consider the Leadwell LTC-25iSMY horizontal turning machine we have for sale. Contact us for further details regarding this machine. • Capacities • Max. turning diameter above the bed: 590 mm • Max. turning diameter above the transverse support: 590 mm • Max. turning diameter: 430 mm • Max. turning length: 770 mm • Max. rod diameter: 78 mm • Max. workpiece weight: 39 kg • Axes and travels • Z2 (counterspindle) travel: 780 mm • Min. C1 axis positioning increment (main spindle): 0.001 • Min. C2 axis positioning increment (counterspindle): 0.001 • Main spindle • Chuck size: 254 mm • Spindle taper: A2-8 • Spindle bore: 89 mm • Spindle drive type: Fanuc A P30/6000i • Counterspindle • Max. speed: 4000 rpm • Chuck size: 210 mm • Taper: A2-6 • Max. rod diameter: 66 mm • Power: 15 kW • Spindle drive type: Fanuc A 12/7000i • Turret / tooling (EWS tool head) • Clamping system diameter: BMT65 • Number of positions: 12 • Max. external tool size: 25 x 25 mm • Max. internal tool clamping diameter (threading): 40 mm • Neighbor tool change time: 0.8 s • Max. tool change time: 1.3 s • Max. speed of driven tools (axial): 4000 rpm • Max. speed of driven tools (radial): 4000 rpm • Rotary tool drive power: 4.5 kW • Rapid feeds • X: 15,000 mm/min • Z: 20,000 mm/min • Y: 7,500 mm/min • Z2 (counterspindle): 20,000 mm/min • Control • Fanuc 0iTF PLUS with 15" LCD, Manual Guide i, Ethernet • Machine input: 65 kVA Additional equipment • Collet clamping • Hydraulic chuck 254/3 (10"), bar max Ø77 mm, 3500 rpm • Renishaw HPMA tool probe (motorized arm) • High-pressure coolant 20 bar through tool head • Workpiece blow-off nozzle above main spindle Iijdpfx Aszw D Drjiyog • Workpiece blow-off nozzle above counterspindle • Cassette chip conveyor with chip container • Counterspindle with chuck 203/3 • Workpiece removal shovel with container • Preparation/interface for bar feeder • Beacon alarm (machine status light) • Oil separator for coolant emulsion (from lost lubrication) • 3 pcs axial rotary unit BMT65 • 3 pcs radial rotary unit BMT65 • 4 pcs double-sided holder for external turning BMT65 • 4 pcs double-sided holder for internal turning BMT65 • 1 pc single-sided holder for internal turning • Filtermist extraction FX5002 Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 12/2010, total length: 14,030 mm, total width: 2,600 mm, suspension: air, wheelbase: 8,980 mm, Year of construction: 2010, Equipment: tail-lift, Axle Configuration Axle Brand: SAF Suspension: Air suspension Rear Axle 1: Lift axle; Max. axle load: 9000 kg Rear Axle 2: Max. axle load: 9000 kg Rear Axle 3: Max. axle load: 9000 kg; Steerable Weights Unladen weight: 9,400 kg Payload: 29,600 kg GVW: 39,000 kg Functional Features Tail lift: Dhollandia DHSM 30, under-ride guard, 2500 kg Isdpfjzqy Iaox Aiysig Cooling engine: Diesel and electric Maintenance APK (Technical Inspection): valid until 07/2027 Identification License plate: OL-89-FY

Condition: used, mileage: 200 km, power: 100 kW (135.96 HP), first registration: 04/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, total length: 6,200 mm, total width: 2,070 mm, total height: 2,480 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,100 kg, loading space length: 3,500 mm, loading space width: 1,750 mm, loading space height: 1,800 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, Technical information Number of cylinders: 4 Engine capacity: 2.299 cc Max. front axle load: 1850 kg Max. rear axle load: 2100 kg Weights Empty weight: 2.427 kg Carrying capacity: 1.073 kg GVW: 3.500 kg Maintenance APK (MOT): tested until 04/2027 Financial information VAT/margin: VAT qualifying Identification Registration number: V-89-GXG = Additional options and accessories = - Airbag - Beifahrerbank - Front center armrest - Immobiliser - LED- lighting - Outside temperature display - Parking sensors - Radio/USB/Aux Iisdjzvngzjpfx Aiyjg - Side door - Tined glass = Remarks = Carrier Xarios 350 Cooling/Freezing/ Heating Tag und nacht 220 Volt Plug

Condition: new, Involute gear cutters for SYNCHROFLEX timing belts: Involute gear cutters for SYNCHROFLEX timing belts: 3M GT, 56x60x22mm T16-25 Involute gear cutters for SYNCHROFLEX timing belts: 3M GT, 56x60x22mm T26-50 Involute gear cutters for SYNCHROFLEX timing belts: 5M GT, 56x60x22mm T17-31 Involute gear cutters for SYNCHROFLEX timing belts: 5M GT, 56x60x22mm T32-79 Involute gear cutters for SYNCHROFLEX timing belts: 8M GT, 70x70x27mm T18-28 Involute gear cutters for SYNCHROFLEX timing belts: 8M GT, 70x70x27mm T29-89 Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T12-20 Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T21-45 Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T46-80 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T13-17 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T18-25 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T26-40 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T41-R Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T12-15 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T16-20 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T21-45 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T46-114 Involute gear cutters for SYNCHROFLEX timing belts: T20 80x80x32 T15-20 Involute gear cutters for SYNCHROFLEX timing belts: T20 80x80x32 T21-R Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T10-14 Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T15-20 Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T21-R Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T12-15 Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T16-20 Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T21-R Involute gear cutters for SYNCHROFLEX timing belts: AT20 80x80x32mm T15-20 Involute gear cutters for SYNCHROFLEX timing belts: AT20 80x80x32mm T21-R Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T11-16 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T17-31 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T32-79 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T80-200 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T18-R Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T41-89 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T90-200 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T41-89 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T90-R Involute gear cutters for SYNCHROFLEX timing belts: HTD20M 80x80x32mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD20M 80x80x32mm T41-R Iedpfxszvrupo Aiyjig Involute gear cutters for SYNCHROFLEX timing belts: MXL 56x60x22mm T10-23 Involute gear cutters for SYNCHROFLEX timing belts: MXL 56x60x22mm T24-R Involute gear cutters for SYNCHROFLEX timing belts: XL 56x60x22mm T10-R Involute gear cutters for SYNCHROFLEX timing belts: L 56x60x22mm T10-R Involute gear cutters for SYNCHROFLEX timing belts: H 70x70x27mm T14-19 Involute gear cutters for SYNCHROFLEX timing belts: H 70x70x27mm T20-R Inv