Used Schuler Typ Mc for sale (3,619)

Condition: used, functionality: fully functional, machine/vehicle number: 04217, For sale is a reliable and robust temperature control unit from Regloplas, model 90S. Used condition, with age-appropriate signs of wear on the housing. 3 units available. Technical data Type: 90S / 6 / TS22 / 1K / RT45 Max. temperature: 90 °C Heating capacity / power rating: 7.1 kW Voltage: 400 V / 3 PE (three-phase) Frequency: 50 Hz Fjdpfxoy E Hzrj Aa Njgb Current: 11 A Filling volume: 3 l Wiring diagram no.: 04217

Condition: used, Year of construction: 2024, load capacity: 3,000 kg, lifting height: 4,760 mm, total length: 4,300 mm, · Hersteller Manitou · Modellname MC 30-4 ST5 · Antriebsart Diesel · Bedienertyp Sitzen · Max. Tragkraft 3000 kg · Lastschwerpunkt 500 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 626 mm · Standard mast reference of the machine FVD 33 · Vorderachslast (beladen) / Hinterachslast (beladen) 6650 kg / 790 kg · Bereifung Pneumatisch · Reifengröße, vorn 12,5/80-18/12 SL R4 · Reifengröße, hinten 27x10-12 SKS · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1159 mm · Abstand zwischen den Hinterrädern 1176 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2155 mm / 1990 mm · Sitzhöhe 1094 mm · Gabelträger DIN 15173 A/B 3A · Gang· breite für Palette 1000 x 1200 quer 5461 mm · Wenderadius 3435 mm · Fahrgeschwindigkeit (beladen / unbeladen) 12 km/h / 24.50 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.47 m/s / 0.46 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.30 m/s · Zugkraft 3100 daN · Steigfähigkeit – beladen 46 % · Festellbremse Hydraulik bremst durch Druckverlust · Nennleistung Verbrennungsmotor 37 kW · Hersteller / Motor Modell / Motornorm Kubota / D1803 CRT E5B / Stage V · Nenndrehzahl 2700 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 3 - 1826 cm³ · Steuerung Elektronisch · Ölmenge für Anbaugerät 42 l/min Fodpfx Aey E Uhaja Nsgb · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053 79 dB

Condition: used, Year of construction: 2024, load capacity: 3,000 kg, lifting height: 4,760 mm, total length: 4,620 mm, · Hersteller Manitou · Modellname MC 30-4 ST5 · Antriebsart Diesel · Bedienertyp Sitzen · Max. Tragkraft 3000 kg · Lastschwerpunkt 500 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 626 mm · Standard mast reference of the machine FVD 33 · Vorderachslast (beladen) / Hinterachslast (beladen) 6650 kg / 790 kg · Bereifung Pneumatisch · Reifengröße, vorn 12,5/80-18/12 SL R4 Fgjdpfx Ajy E Uacea Nob · Reifengröße, hinten 27x10-12 SKS · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1159 mm · Abstand zwischen den Hinterrädern 1176 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2155 mm / 1990 mm · Sitzhöhe 1094 mm · Gabelträger DIN 15173 A/B 3A · Gang· breite für Palette 1000 x 1200 quer 5461 mm · Wenderadius 3435 mm · Fahrgeschwindigkeit (beladen / unbeladen) 12 km/h / 24.50 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.47 m/s / 0.46 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.30 m/s · Zugkraft 3100 daN · Steigfähigkeit – beladen 46 % · Festellbremse Hydraulik bremst durch Druckverlust · Nennleistung Verbrennungsmotor 37 kW · Hersteller / Motor Modell / Motornorm Kubota / D1803 CRT E5B / Stage V · Nenndrehzahl 2700 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 3 - 1826 cm³ · Steuerung Elektronisch · Ölmenge für Anbaugerät 42 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053 79 dB

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 165 h, load capacity: 35,000 kg, lifting height: 14,500 mm, fuel type: electric, mast type: telescopic, construction height: 2,250 mm, empty load weight: 31,140 kg, total length: 6,170 mm, drive type: Elektro, construction width: 2,300 mm, Pick & Carry Crane Mast type: Telescopic Condition: As good as new Technical condition: very good Front tires Type: Non Marking Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Condition: 80 - 100% Fjdet Dd U Depfx Aa Nogb Description: Remote control, support legs, 22 to jib, double hooks Remote control, support legs, 22 to jib, double hooks Remote control, support legs, 22 to jib, double hooks

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Tilting Spindle Moulder MAKA SF 4510 / GRIGGIO with Power Feed Very good condition, the machine comes from a small village carpentry shop with 3 people. Everything works perfectly. All bearings and guides are in excellent condition; the machine runs very smoothly. Equipped with a moulder fence, with one fence jaw adjustable in depth and featuring fine adjustment with scale, enabling jointing work, e.g., for a glue joint profile. The entire fence can also be adjusted via a set screw, allowing for very precise settings. With spindle locking via clamping lever. Chip extraction is very effective, with two 120mm diameter extraction ports on the fence and machine. Comes with a 30mm spindle, continuously tiltable from -5° to 45°, adjusted via handwheel, with a precise degree scale. Selectable clockwise/counterclockwise rotation. We deliver the machine in person anywhere in Germany for 220.00 EUR and carry out a demonstration, so you have no risk with your purchase. Delivery to other EU countries is also possible. Large table opening, adjustable with rings (this allows the use of cutters with a very large diameter and safe cutting with small cutters). Spindle speeds: 3200, 4200, 6000, and 8000 rpm. Spindle height adjustment via handwheel with locking screw. Spindle is exchangeable (a 40mm spindle can also be used). Optimal power transmission via V-belt drive. Machine table is 1070mm wide and 940mm deep. The machine is ready for immediate use. Fgsdpfxjy Rh Nze Aa Neb 380V, 5500W, with motor protection switch against overload. Year of manufacture: 1999. Weight: approx. 700kg. The machine has a CE certificate. Comes with manual, motor brake, and emergency stop switch, fully compliant with all requirements of the woodworking trade association (Holz-BG). Included is also a 3-roller power feed from HAFFNER with 8 speeds. Optimal, simple, fast, and safe operation.

Condition: used, Year of construction: 2021, machine/vehicle number: PB017, operating hours: 335 h, Max. load capacity: 2,820 kg, max. working radius: 820 cm, hook height approx. 870 cm, max. lifting height. Battery type: lithium-ion, dimensions (L/W/H) approx. 280-332x75x147 cm, fully electric drive with lithium-ion battery, variable motor 7.5 kW AC 30 V, own weight approx. 1,995 kg Fsdpfjy D Tyfox Aa Negb

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Fsdexzq Ncopfx Aa Nsgb Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured Fgjdpfx Aox Hn D Roa Nob - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: excellent (used), Year of construction: 2021, Year of manufacture: 2021 Applicable material: Concrete Technical condition: very good Visual appearance: very good Please contact Ernst van Hek for more information For sale: A highly versatile, complete Topcon 3D machine control system. This kit is built around the modern MC-i4 controller and GX-55 display. It is fully tested, functional, and comes with a valuable set of permanent software licenses, making it suitable for both excavators and bulldozers. Key Hardware Included: – GX-55 Control Box: High-resolution touchscreen, very responsive. – MC-i4 Receiver: Latest generation controller for fast data processing. – Dual PG-S3 Antennas: High-precision Fence Antenna™ technology for superior satellite tracking. – 4x IS-3 Tilt Sensors: Full set for complete 3D machine positioning. – Satel Radio Modem: For reliable base station corrections. – Full Cable Harness: All heavy-duty machine cables included. – Original Transport Case: Robust aluminium/foam protection for display and antennas. Active Software Options (See Photos): – Excavator (Dual GPS) – Bulldozer – As-built Mapping – Avoidance Areas – Sitelink3D – Advanced Coordinate System – Multi-base RTK – System Details: – Year: 2021 – Software Version: 12.1.483 Fsdpfxoy Hxrlo Aa Nogb – Firmware: mc-5.37 Condition: Professional grade, well-maintained.

Condition: used, Year of construction: 1997, machine/vehicle number: 3073, functionality: fully functional, input voltage: 400 V, input current: 34 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 60 mm, cutting width (max.): 2,850 mm, saw blade diameter: 125 mm, saw blade bore: 30 mm, rotational speed (max.): 2,870 rpm, total length: 5,430 mm, total width: 5,040 mm, total height: 1,640 mm, overall weight: 3,150 kg, cutting length (max.): 3,200 mm, compressed air connection: 6 bar, feed length Y-axis: 3,200 mm, feed rate Y-axis: 40 m/min, main saw diameter: 280 mm, saw drive: 7,500 W, Equipment: scorer, Used plasterboard saw with extraction system for sale For sale is a plasterboard saw with integrated extraction system, year of manufacture 1997. The machine is used but in good condition. Details: - Year of manufacture: 1997 - Condition: Used, but good - Including extraction unit - Location: DE 93326 Abensberg - Inspection under power possible by appointment Important information: - Sale exclusively to commercial buyers. - Sale without any warranty. - All information provided without guarantee. Fodpfx Asyfg Rlja Negb If you are interested or have questions, please contact us to arrange a viewing appointment.

Condition: used, Year of construction: 2004, We are offering this used STORK MPS B.V. bone separator. Type no: DMM50; Serial no: B27-13B; Order no: BX152004; Voltage: 400V; PHASE/Hz: 3/50; Netherlands; Year of manufacture: 2004. Control cabinet is not included. Net price: 7,000 EUR. Price negotiable. Fjdpfx Aasy Hi A Uo Negb

Condition: used, Year of construction: 1993, total length: 2,360 mm, total width: 1,450 mm, total height: 1,820 mm, For sale: Simo deboning machine, type HD 100/225, year 1993. Serial no.: 93-08702. Dimensions: 2360x1450x1820 mm. Hopper: 1120x940 mm. Net price: €9,000. Price negotiable. Fsdpfxey Hizks Aa Nogb

Condition: excellent (used), functionality: fully functional, total length: 1,850 mm, total width: 2,100 mm, total height: 2,950 mm, overall weight: 2,000 kg, Wolfking Mixer for Sale Manufacturer: Wolfking Place of manufacture: Denmark TYPE: SFG 1500/250; No: 61572 Weight: 2000 kg Fgjdpfx Aoy Hhigsa Nsb 400V; 50 Hz; 59kW; 110A Knife and sieves included Net price: 13,000 Euro Price negotiable For more information, call: +48 534070839

Condition: new, total length: 6,430 mm, Year of construction: 2025, load capacity: 15,000 kg, Crane JMG MC 100.08 Fodpfxjyvk Nbj Aa Negb Drive Electric Year built 2025 Lifting weight (kg) 15,000

Condition: new, total length: 4,630 mm, Year of construction: 2026, load capacity: 13,000 kg, Crane JMG MC 130S Drive Electric Year built 2026 Fedpfjy Eh Ruex Aa Njgb Lifting weight (kg) 13,000

Condition: new, total length: 6,042 mm, Year of construction: 2026, load capacity: 40,000 kg, Crane Fgjdpfoy Eh Rnox Aa Nsb JMG MC 400S Drive Electric Year built 2026 Lifting weight (kg) 40,000

Condition: new, Year of construction: 2026, load capacity: 25,000 kg, lifting height: 2,470 mm, total length: 6,520 mm, - Ladegerät Hersteller: Zivan - Model: Battery Charger NG9 - Input: 400V, 12A, 50-60Hz - Output: 96V, 80A - hintere Hintergruppe mit zwei unabhängig voneinander drehenden Gruppen - Vorderachsenantrieb mit gegenläufiger Bewegung - großer Freihubmast - Abnehmbare Kontergewichte - Ausfahrbare Hintergruppe: 7720 mm - Max Tragfähigkeit Gabel mit offener Hintergruppe: 25t@0.9m - Max Tragfähigkeit Gabel mit geschlossener Hintergruppe: 16.5t@0.9m Fgodpfxoy Eh N Ro Aa Nob - Antrieb: Vorderachser Antrieb mit gegenläufiger Bewegung N°2 Elektromotoren AC 12 kW 96V - Gesamtgewicht mit Gabeln Kg. 25.000 - Gesamtgewicht mit Ausleger Kg. 25.000 - Gabelhalterung und Gabelzahn: 3.000 kg - Gewicht vom Kranmast: 3.000 kg - Gewicht von den abnehmbaren Kontergewichten : 6.000 - Batterie: 96 V - 1050 Ah - Betriebsbremse: hydraulisch mit Fußsteuerung - Park- und Notbremse: hydraulisch mit automatischer Steuerung - Lenkung: über die Hinterachse - Park- und Notbremse: hydraulisch mit automatischer Steuerung - Auslegerwinkel vom Mast+12°/-7° - Motor: N° 1 Elektropumpe AC 35kW 96V

Condition: used, total length: 5,600 mm, Year of construction: 2023, load capacity: 18,000 kg, - Funkfernbedienung für alle Kran- und Auslegerbewegungen. Falls vorhanden auch Bewegungen von hydraulischen Anbauteilen - Vorderachse Antrieb mit Gegenläufer Bewegung - Abnehmbare Kontergewichte - Proportional ausfahrbarer hydraulischer Ausleger - Frontabstützungen - Vorderradantrieb Nr. 2 Elektromotoren AC 8,5 kW 80V. Isolationsklasse H - Eigengewicht 21.610 kg - Abnehmbare Kontergewichte 6.110 kg - Batterie: 96 V - 1.035 Ah - Gewicht Batterie: 3030 kg - Reifen: Vorne: Nr.4 superelastich 355x50-20” / Hinten: Nr.2 superelastich 355x50-20 - Reifen Hersteller: Trelleborg - Farbe: grau - Lenkung: über die Hinterachse / Lenkwinkel 90°/90 - Elektronische Lastbegrenzung - Automatisches Bremssystem an allen Rädern - Hergestellt aus vorgefertigten und verschweißten Stahlplatte - Auslegerwinkel +65°/-6° - Elektromotor N° 2, 23 kW - 96 V AC, 16 kW - 96 V Isolationsklasse Fgedey Eh Nkepfx Aa Neb - Radstand: 3100 mm - Bodenfreiheit Mitte: 170 - Höhe Kabine: 2100 mm

Condition: used, total length: 5,570 mm, Year of construction: 2023, load capacity: 25,000 kg, Crane JMG MC 250 Fedey Eh I Hjpfx Aa Nsgb Drive Electric Year built 2023 Lifting weight (kg) 25,000

Condition: used, total length: 4,500 mm, Year of construction: 2023, load capacity: 13,000 kg, - Vorderradantrieb Nr. 2 Elektromotoren AC 8,5 kW 80V. Isolationsklasse H - Eigengewicht Kg. 14.640 Abnehmbare Kontergewichte 4.000 Kg. - Batterie: 80 V - 900 Ah = 8 Arbeitsstunden Fgjdsy Eh Iyjpfx Aa Neb - Räder: Vorne: Nr.2 superelastich 300-15” Hinten: Nr.2 superelastich 250-15 - Lenkung: über die Hinterachse Lenkwinkel 90°/90° - LMI - Elektronische Lastbegrenzung - Automatisches Bremssystem an allen Rädern - Auslegerwinkel +60°/-5° - Elektromotor 17 kW - 80 V AC, Isolationsklasse - Hydrauliksystem: Angetrieben durch leise Zahnradpumpe (17kW), Isolationsklasse H - Hydraulikbedienung über Joystick und Hebel an der Funkfernsteuerung - Filter und Sicherheitsventile - Maximaler Betriebsdruck 22MPa. - Hergestellt aus vorgefertigten und verschweißten Stahlplatten - Abnehmbare Kontergewichte: Entwickelt für schnelle De- und Remontage, um jederzeit die Boden- und Achsbelastungen zu optimieren - Kran Klassifizierung nach UNI ISO 4301-1

Condition: new, total length: 6,690 mm, Year of construction: 2026, load capacity: 65,000 kg, Crane JMG MC 650S Fgodpfxey Eh Ite Aa Nob Drive Electric Year built 2026 Lifting weight (kg) 65,000

Condition: used, total length: 5,770 mm, Year of construction: 2019, load capacity: 25,000 kg, Crane JMG MC 250 Drive Electric Fgsdpsy Eh Imsfx Aa Njb Year built 2019 Lifting weight (kg) 25,000

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 5,000 rpm, bar diameter (max.): 26 mm, total width: 2,200 mm, total height: 2,200 mm, travel distance X-axis: 78 mm, travel distance Y-axis: 210 mm, overall weight: 2,900 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D with EMCO specials, number of axes: 4, This EMCO Turn 420 MC Plus was manufactured in 2005. It features a maximum turning diameter of 100 mm and a maximum part length of 600 mm. The machine is equipped with a powerful spindle speed range of 0–5000 rpm and a tool changer with 24 stations. If you are looking to get high-quality turning capabilities, consider the EMCO Turn 420 MC Plus multi-spindle turning machine we have for sale. Contact us for further details. • Condition: Very good; connected and ready for testing • Tech specs: • Swing above slide: 160 mm • Main spindle to counter-spindle: 408 mm Fgedpfx Ajy E Sp Uja Njb • Max. turning diameter: 100 mm • Max. part length: 600 mm • Max. bar-stock diameter: 26 mm • Travel: • X/Z: 78 mm • Main spindle: • Max. torque: 38 Nm • Spindle adapter: 70 h5 • Spindle bearing (front ID): 60 mm • Spindle bore: 38 mm • Counter-spindle: • Speed range: 0–5000 rpm • Torque: 38 Nm • Spindle adapter: 70 h5 • Spindle bearing (ID): 60 mm • Clamp length (Ø26 mm): approx. 100 mm • Travel (Z2): 233 mm • C-axis: • Resolution: 0.001° • Rapid traverse: 1000 rpm • Positioning: 3° • Drive power: • Power: 9 kW • Tool changer: • Tool stations: 2 × 12 • VDI shaft: VDI 16 • Tool size (square): 16 × 16 mm • Boring bar diameter: 25 mm • Indexing time: 0.4 sec • Driven tools: • Speed range: 0–5000 rpm • Max. torque: 3 Nm • Max. power: 1.6 kW • Number of tools: 2 × 4 • Feed drives: • Rapid traverse X/Z; X1/Z1: 12/20 m/min • Feed force X: 3000 N • Feed force Z: 3000 N • Acceleration time: 0.1 sec • Coolant system: • Tank capacity: 200 L • Pump power: 0.57 kW • Power consumption: • Connected load: 15 kVA • Supply pressure: 6 bar • Supply rate: 300 L/h • Dimensions: • Center height (top/bottom): 1179 / 1030 mm • Footprint (W × D): 2200 × 1386 mm Additional equipment • Set of accessories and tool holders included Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2023, numbers of pallets 15 dimensions 1,80 x 1,30 x 1,18 m The pallet magazine is unused. Fgsdpfjy Eh Akox Aa Njb Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 1972, Two DEMAG MC 85 mobile cranes are available, with a displacement of 5,652 cm³ and a weight of 20 tons, complete with documentation. On-site inspection is possible. Fedoy N Uv Ejpfx Aa Negb