Used Sick Codeleser, Zv2D621D-2Msfbb5 for sale (207)

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Gedpfxjg Iihws Af Ajbl Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees Gsdpfxsgrkigj Af Aebl heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: used, Year of construction: 2016, machine/vehicle number: 4303, pressing force: 500 t, pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Gsdpfx Aedyynvjf Ajbl Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure control:über PLC (Mindestdruck 50T) Cylinder:4 x ?90 x 70 mm stroke length max.:300 über PLC einstellbar mm Outejection speed forward:95 mm/sec. Outejection speed return:240 mm/sec. Capacity:4 x 15T bei 250 bar t Pressure setting:über Monitor von 50-500T t Pressure constant posture:0-900 sec Hydraulics tank:2000 l Siemens Control System:S7 300 Storage capacity:200 Programme Electronics from German manufacturers:SIEMENS/MÖLLER Tax desk:auf Schwenkarm Light sensors sick:1500 auf der Vorderseite mm

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 40 t, table width: 1,000 mm, table length: 600 mm, Hidrobrasil Double Column Press – 40 t – 1,000 × 600 mm – Stroke 500 mm Gsdexrby Hspfx Af Aobl For sale is a hydraulic double column press (H-frame) manufactured by Hidrobrasil, featuring an adjustable pressing force from 6 to 40 t. This machine is designed for calibration, assembly, and small series applications, and stands out thanks to its compact design, robust guidance system, and precise control. Ideal for flexible production processes with changing requirements. ==== Technical data & information: Hydraulic Double Column Press – 40 t ==== General information - Manufacturer: Hidrobrasil - Model: Double Column Press - Design: H-frame / Double Column Press - Designation: Small Batch Press / Calibration Press - Pressing force: 6–40 t (adjustable) - Machine weight: approx. 3,500 kg - Dimensions (L × W × H): approx. 2,100 × 1,600 × 3,500 mm ==== Working area - Max. installation height: 700 mm - Stroke: 0–500 mm (adjustable) - Table height above floor: 800 mm ==== Table & Slide - Table size: 1,000 × 600 mm - Slide area: 1,000 × 600 mm - Guide columns: Ø 100 mm (4 units) - T-slots and holes: as per customer specification ==== Speeds - Rapid traverse speed: 80 mm/s - Pressing speed: 9 mm/s - Return speed: 90 mm/s ==== Hydraulics & drive - Hydraulic pump: ASC, 67 + 8 l/min - Motor power: 4 kW - Total connected load: approx. 6 kW - Operating pressure: max. 260 bar - Pressure accuracy: ± 5 bar - Hydraulic manifold and valves: Duplomatic - Air and oil filters: Filtrec - Electronic oil level switch - Air cooling for hydraulic system - Pressure adjustment via pressure switch - Hydraulic unit mounted at top rear ==== Control & Safety - Control via sensors - Safety light sensors - Safety cover (door) at rear - Work area interior lighting - Pressure display via manometer ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Components: Siemens, Allen Bradley, SICK ==== Electrical cabinet - Protection class: IP54 - Spare capacity: approx. 30% - Cooling: air cooling - Interior lighting: fitted - Operating mode selector: lockable ===== Calibration, assembly work, small batch production, forming technology, flexible production Hydraulic press, double column press, H-frame press, calibration press, assembly press, industrial press Looking for a hydraulic press tailored to your application? Contact us for a customised offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds upon these. Our key strength lies in special-purpose machine engineering and press automation. We supply customised hydraulic presses at surprisingly competitive prices. All presses are equipped with hydraulic components primarily from leading European manufacturers.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 32 A, type of input current: three-phase, pressing force: 20 t, total length: 2,400 mm, total width: 1,500 mm, total height: 2,400 mm, overall weight: 2,000 kg, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, control cabinet length: 60 mm, control cabinet width: 80 mm, height adjustment type: hydraulic, Equipment: documentation/manual, Hidrobrasil Tablet Press – 20 t – C-Frame – Manual Loading Press For sale is a hydraulic single-column press (C-frame) from Hidrobrasil with a pressing force of 20 t, specifically designed for applications in the pharmaceutical and chemical industries. The machine is ideally suited for the production of tablets, as well as for precise pressing and forming tasks in smaller batch production and laboratory applications. ==== Technical Data & Information: Hydraulic Tablet Press – 20 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single-Column Press - Machine type: Tablet Press - Design: C-Frame / Single-Column Press - Year of manufacture: 2023 - Location: Gelsenkirchen, Germany - Pressing force: max. 20 t - Machine weight: approx. 2 t - Total height: approx. 2,400 mm ==== Working Area - Max. opening width: 500 mm - Stroke / min. opening: 400 / 100 mm - Table height above floor: 800 mm ==== Speeds - Rapid closing: 120 mm/sec - Pressing speed: 5–10 mm/sec ==== Hydraulics & Drive - Operating pressure: max. 250 bar - Pressure accuracy: ±5 bar - Main pump: Gear pump, approx. 10 l/min - Oil volume: approx. 150 l (HLP 46) - Main motor: 22 kW - Total connected load: approx. 6 kW ==== Precision & Stability - Parallelism deviation: ±0.1 mm at 20 °C - Deflection: max. 0.3 mm/m ==== Control & Safety - Control voltage: 24 V DC - Light barriers: SICK / Pilz / Schmersal - Two-hand control, optionally foot control - Safety design complies with EU standards and UVV ==== Equipment - Table top designed as a tray with 50 mm edge and drain - Position adjustment via sensors - Pressure adjustment: 5–20 t via rotary control - Control cabinet mounted on the right, protection class IP54 ==== Production & Features - Multi-tool: 8 pressing cylinders - Output: approx. 8–12 parts per minute - Hydraulic unit fully removable for maintenance ===== Tablet production, pharmaceutical industry, chemical applications, laboratory presses, small batch manufacturing Hydraulic press, tablet press, single-column press, C-frame press, pharma press, laboratory press Gbsdotv Ewdspfx Af Ajl Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply with all aspects of the Brazilian national safety directive NR 12, which is based on these standards. Our main strength is custom machine building and press automation. We offer bespoke hydraulic presses at surprisingly affordable prices. We primarily use components from leading European manufacturers for the hydraulic systems of our presses.

Condition: new, Year of construction: 2026, machine/vehicle number: -, functionality: fully functional, pressing force: 40 t, Portal Straightening Press – Manufacturer Hidrobrasil – 40 t Gantry Press – Table 635 × 555 mm For sale is a portal straightening press by Hidrobrasil, offering a pressing force of 40 t. This machine is based on a proven design, can be newly manufactured at short notice, and individually customized. It is ideal for straightening, assembly, pressing-in, and pushing-out operations. ==== Technical Data & Information: Portal Straightening Press Hidrobrasil – 40 t Gantry Press ==== General Information - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry / Frame Press - Pressing force: 40 t - Machine weight: approx. 1,500 kg - Dimensions (W × D × H): 1,880 × 900 × 2,300 mm ==== Working Area - Max. opening width: 500 mm - Table-to-floor distance: 1,200 mm - Column spacing: 900 mm ==== Table System - Table size: 635 × 555 mm - Table thickness: 70 mm - Versions: open, closed, or with T-slots (optional) ==== Hydraulic Cylinder - Stroke: 550 mm - Cylinder diameter: Ø 150 mm - Piston rod: Ø 90 mm - Operating pressure: max. 280 bar ==== Hydraulics - Pump: ASC - Flow rate: 12 l/min - Motor power: 4 kW - Return speed: 16 mm/s - Idle speed: 10 mm/s - Oil tank capacity: 120 l - Hydraulic block / valves: Hydropack - Pressure gauge: manometer - Pressure adjustment: adjustable - Pressure switch: included Gsdpfx Asyia D Rjf Ajbl - Power unit: side-mounted ==== Operation - Hand lever operation - Sensitive speed control - Pressure setting via rotary knob ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 5 kW ==== Control Cabinet - Protection class: IP54 - Reserve space: approx. 30 % - Operating mode selector switch: lockable - Components: Siemens, Allen-Bradley, Sick ==== Equipment and Features - Integrated tool holder in the press ram (up to Ø 250 mm) - Custom table versions available - Construction can be adapted to customer requirements ==== Standards and Documentation - CE documentation - Spare parts lists - Electrical diagrams and parts lists (digital) - Standards: - 2006/42/EC Machinery Directive - 2014/35/EU Low Voltage Directive - 2014/30/EU EMC Directive - EN ISO 16092-1 / -3 - EN 60204-1 - EN ISO 12100 - EN ISO 4413 ==== Straightening, assembly, pressing-in, pushing-out, workshop applications, maintenance, series production Gantry press, straightening press, hydraulic press, workshop press, assembly press, insert press, frame press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety requirements. Additionally, our presses surpass Canadian and European safety requirements by fully complying with the national Brazilian safety directive NR 12, which builds upon these standards. Our major strengths are custom machine building and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. The hydraulics of our presses predominantly feature components from leading European manufacturers.

Condition: ready for operation (used), Year of construction: 2020, An automation machine Infinite Technologies and Robotics (CN) for automated assembly of clips on electroplated chrome trim strips is available. Clips per component: 6, component geometries: 4, pressing force: 100N, pressing force tolerance: +/-10N, positioning tolerance: +/-0.3mm. Sliding tables: 2, sliding table dimensions X/Y/Z: 1180mm/770mm/15mm, sensors: 4. Tool holders: 2, holder dimensions X/Y/Z: 740mm/490mm/190mm, max. holder weight: 20kg. Axis systems: 2, travel X/Y/Z: 800mm/400mm/300mm, max. speed: 250mm/s, spindle pitch: 5mm, payload: 330N. Machine dimensions X/Y/Z: approx. 3700mm/2250mm/2300mm, weight: approx. 3000kg, control: Siemens S7. Including vision system Keyence, sensors Sick and pneumatics SMC. Documentation available. An on site inspection is possible. Gbodpfx Asyrta Tjf Aol

Condition: as good as new (ex-display), Year of construction: 2016, pressing force: 40 t, We offer an immediately available Hydraulic spotting press with 40 tons pressure. Due to a change of warehouse location, this press is offered at a very competitive price. Pressure 40 t Table length 1000 mm table width 700 mm Machine weight approx. 9 t space requirement approx. 4000 x 4400 x 1800 mm stroke length 1050 mm installation height 1200 mm table rotatable 180 degrees table load max. 5 t forward speed 100 mm/sec return speed 100 mm/sec working speed adjustable from 0 to 10 mm/sec. Main cylinder 1 piece table extendable for 1050 mm table tiltable 50 degrees upper tool tiltable 180 degrees Traversing speed of the table 25 mm/sec Pressure, travel and speed adjustable via monitor- control adjustable robust machine body with solid welded construction, manufactured according to DIN 8651 low maintenance and reliable due to robust technology maintenance balcony with marine ladder entire range of motion secured by Sick light barriers Table moves out of the machine to the front and straightens up by 45 degrees on request. Control cabinet to the left of the machine Monitor control with 200 memory locations REMOTE function for remote maintenance Operating manual, technical documents, documentation in German language CE certificate monitor SIEMENS 9" Motors from WEG Hydraulics from Bosch Rexroth Interior lighting Operator panel on swivel arm Two-hand operation on movable stand USB interface for data transfer Siemens control system Light sensors Sick 1250 mm Gbjdpfxehtm E No Af Ajl ram plate can be folded down hydraulically, moves up to approx. 175 degrees Columns and cylinders are made of SAE 1045 tool steel (identical to German standard C 45) and are induction hardened and chrome plated on the outside. The linear measuring rod informs the control system of the position of the ram in each case. The travel distance, the upper stop point and the changeover point at which the press is to switch from idle to working speed, as well as the end position to be approached, can be entered easily and quickly via the monitor control. The working speed can be set in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm. The control monitors the secured areas, all hydraulics and the pump. The control system is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm, which reduces the distances involved.

Condition: new, Year of construction: 2026, pressing force: 100 t, pressure:100 t passage width:500 mm stroke:400 mm Approx. weight (w/o operational materials):5,5 t Measurements L x W x H:ca. 1300 x 2000 x 2750 mm Table size:750 x 600 mit T-Nuten mm Table height above ground level:850 mm Gbedpofu Nqxofx Af Asl Oil Tank Capacity:190 l main cylinder:230 Ø mm Auxiliary cylinder:2 Stk - 50 x 30 Ø mm Auxiliary guidance:2 Stk - 50 Ø stk. Engine Output:11 kW :23 Lt./min. Approach Speed:110 mm/sec Pressure Speed:9 mm/sec Return Speed:200 mm/sec Ram plate:750 x 600 mit T-Nuten mm pre-run valve:NG.63 Stk Painting:Lichtgrau & Dunkelgrau Siemens Control System:S7 1200 Monitor:Siemens 7 Zoll Light sensors sick:750 + 150 mm Control Set-up operation:manuell ohne Lichtsensor Automatic control:mit Lichtsensor Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, vibratory feeder bowl feeder make: E+K SORTIERSYSTEM type: EMSE-55GU Gedpfxjicnico Af Ajbl trough diameter: 800 mm; voltage: 230 volts 50Hz protection: ip 44 vibration: 3000 vibration controller: REOVIB MFS 168 Sick sensor adjustable height frame inclusive dimensions: height: 1400mm width: 900mm weight: 550 kg

Condition: new, Year of construction: 2026, 1. Laser Standard Gbjdpfxsyrd Uns Af Asl Description: An integrated, sandwich-platform-based plug-and-play laser source cell. • Robot: KUKA KR10 R1440-2 • Power unit: 2 kW fiber laser (optional: 3 kW) • Areas of application: 0.8 - 3 mm sheet metal, stainless steel furniture accessories, aesthetic welds that do not require seam cleaning. • Abbreviation stands for: Laser Standard • Detailed specifications: * Oscillating laser head (obstacle compensation, tolerates assembly gaps). o KUKA.LaserTech software package. o Manual turntable (180-degree rotation). o Laser safety class enclosure and SICK safety sensors. 2. Laser Advanced Description: High-precision laser cell with automatic positioning and wire feed unit. • Robot: KUKA KR10 R1440-2 • Power unit: 2 kW/3 kW fiber laser + synchronized (cold) wire feed • Application: Sheet metal with a thickness between 2 and 5 mm, aluminum castings, and designer furniture requiring high strength and filling. • Abbreviation stands for: Laser Advanced • Detailed specifications: o KUKA external axis servo rotary table operates synchronously with axis control. o Automatic wire feed motor and torch nozzle tracking system. o Integrated fume extraction and filtration system (optional). 3. CMT-Standard Definition: Fronius CMT technology is an industry-grade standard cell for spatter-free cold arc welding. • Robot: KUKA KR10 R1440-2 • Power supply: Fronius TPS 320i CMT • Application: Mass production of thin and medium sheet metal (1-5 mm), where burr formation is undesirable. • Abbreviation stands for: CMT Standard • Detailed specifications: o Robacta Drive (push-pull) torch system (for stable wire feed). o Automatic torch cleaning station (brushing + spraying + cutting). o Economical chassis with manual turntable. 4. CMT Plus Description: A top-tier arc welding cell with L-positioner for demanding geometries and large components. • Robot: KUKA KR10 R1440-2 • Power supply: Fronius TPS 400i CMT • Areas of application: Large chassis, complex office chair frames, components requiring multi-axis movement. • Abbreviation stands for: CMT Plus • Detailed specifications: o L-positioner (L-tilting device): Executes a tipping movement while rotating the part 360 degrees around its own axis. o KUKA.ArcTech software with "TouchSense" function (contact-based part positioning). o Extended work area cabinet.

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 59800 € 1130.22 € 100 to Gjdpfx Ajwmwvcjf Ajbl 400 mm 800 x 500 mm 500 mm 110 mm/s 10 mm/s 160 mm/s 11 kW 1900 mm 1700 mm 2930 mm 5500 kg 250 bar Welded monoblock frame Cylinders hardened and chrome-plated 2 auxiliary cylinders and 2 round guides T-slots can be configured according to customer requirements Pump, valves, and filters from Bosch Rextroth Hydraulic overload valve Hydraulic proportional valve Cooler Siemens electrical components 8 additional signal inputs and outputs 7-inch touchscreen Siemens S7 PLC Stroke, pressure, speed, and dwell time adjustable via the PLC Remote maintenance access Sick light guards Safety covers Safety PLC from Siemens or Sick Category 4 sensors and photoelectric switch Two-hand control panel Reset and emergency stop buttons Equipped according to CE regulations

Condition: used, Year of construction: 2018, Pressure 315 t stroke 750 mm distance between columns 1700 mm Distance table/ram, max. stroke up, adjustment up 1250 mm Table surface area 1600 x 1300 mm Gbsdpfjvuuf Esx Af Asl pressure of drawing cushion in table 125 t Die cushion stroke in table 350 mm Die cushion pressure in ram 1000 x 900 t Ram surface 1600 x 1300 mm Side window 1100 mm feed down 400 mm/s feed up 400 mm/s working feed 12 - 44 mm/s oil volume 2500 l power requirement 35,0 kW Weight 43,50 t dimensions of the machine ca. 3,6 x 3,1 x 6,0 mxmxm height over floor 4,9 mm yom 1987 -> 2018: new electric control Siemens S 7 new ligh guard at the front (Sick C 4000) permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning, ram interlocking, controllable dependant on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

Year of construction: 2000, condition: good (used), Used Amada Tp150ex 150ton press / stamping machine Amada TP150 EX electric Power Press with feed Atkin Bhp feed and Atkin BHP decoiler New/year 2000 TP150 Model Amada TP-150EX Weight 16 tons Accessories Sick Guards Hydraulic Overload Variable Speed Drive Hydraulic Tool Clamping Capacity 15o tons Supplied New July 2000 Stroke 175mm Bed Area 1250 x 750 x 160mm Ram Area 700 x 550mm Ram Adjustment 100mm (motorised) Die Height 390mm Ideal for automotive or aerospace sheet metal press work Gbjdpon Smg Tsfx Af Asl New c and h frame presses also available.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, pressing force: 170 t, working width: 3,100 mm, working range: 3,100 mm, AMADA MULTI AXIS CNC 170 TONS X 3100 HYDRAULIC DOWNSTROKING PRESS BRAKE WITH AMADA OPERATEUR II 8 AXIS CNC CONTROL Description TYPE HYDRAULIC DOWNSTROKING CAPACITY 170 TONS CONTROL AMADA OPERATEUR II NO OF AXIS 8 INCLUDING Z1 AND Z 2 BENDING LENGTH 3100mm OPEN HEIGHT 450 STROKE LENGTH 180 THROAT DEPTH 410 MOTOR SIZE 15 KW FRONT GUARDING ERWIN SICK MACHINE MOUNTED ELECTRONIC GUARDS SIDE FENCING REAR INTERLOCKED Gjdpfsv Iftgsx Af Aebl WEIGHT 11 TONS

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 150 t, working width: 4,100 mm, working range: 4,100 mm, Used high quality very accurate Edwards Pearson PR6 150/4100 CNC Pressbrake for sale New / Year 2002 Total axis: 6 axis complete with Crowning Capacity: 4.1m x 150ton / 4100mm x 150ton Fully serviced Very late Pr machine before Bystronic pressbrakes Complete with with: Cybelec CNC Control with Colour Graphics  Y1, Y2, X, R, Z1, Z2 Max stroke 215mm Sick Infrared Lightguards Full Top and Bottom Tooling Has come from a company that manufacture’s for the architectural sector and has mainly been folding aluminium New tooling to fold your products on this press available Gbodsv Ub Elepfx Af Aol Can be seen working

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 15 kW (20.39 HP), stroke length: 215 mm, controller manufacturer: Cybelec, controller model: DNC 1200, bending force (max.): 200 t, number of axes: 6, type of crowning: CNC-controlled, Equipment: CE marking, european tool clamping system, foot remote control, lower tooling, upper tooling, Used high quality very accurate Edwards Pearson PR6 200/4100 6axis CNC Pressbrake for sale New / Year 2001 Gedpfxjx Avbyo Af Asbl Model PR6 200/4100 Total axis: 6 axis complete with Crowning Capacity: 4.1m x 200ton / 4100mm x 200ton Fully serviced Very late Pr machine before Bystronic pressbrakes Upper Euro Tool Clamps Complete with with: Cybelec CNC Control with Colour Graphics Y1, Y2, X, R, Z1, Z2 Max stroke 215mm Sick Infrared Lightguards Full set of Top and Bottom Tooling With crowning

Condition: excellent (used), pressing force: 100 t, table width: 3,000 mm, working length: 3,000 mm, Used high quality very clean Ursviken EKP Optima 100 3.1 / 2.55 3metre x 100ton cnc pressbrake for sale Used Ursviken cnc pressbrake for sale – Video at the bottom of the listing Pullmax Ursviken Optima EKP CNC 100 3.1/ 2.55 Press brake cnc Specifications Tonnage 100 T Folding length 3100.0 mm / 3metre CNC Cybelec DNC 7000 Control 6axis in total Complete with integrated hemming table to produce safety edges and flashings at 3metre length Back gauge: 2 fingers on the backstop Fully serviced. Complete with a large selection of tooling as per photographs —————- Gbjdpfxetwyuuo Af Asl Weight 8400.0 kg State: good condition PULLMAX URSVIKEN EKP CNC 100 3.1 / 2.55 100 ton x 3100mm Downstroke 6 Axis CNC Press Brake for sale Cybelec DNC 7000 Control Guards sick Axis: y1, y2, r, x, z1 and z2 and controlled on the Cybelec control

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, working width: 3,100 mm, bending force (max.): 130 t, control type: CNC control, number of axes: 6, Equipment: CE marking, european tool clamping system, lower tooling, safety light barrier, upper tooling, Used Amada HFE 3metre x 130ton cnc pressbrake for sale TYPE HYDRAULIC DOWNSTROKING CAPACITY 130 TONS Gbjdpfx Ajw Ugg Esf Ajl CONTROLLED AXIS Y1, Y2, X, R1 R2 Z1 Z2 MAX BEND LENGTH 3000 MM OPEN HEIGHT 470 YEAR 2001 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR POWER 11 KW FRONT GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED FENCING TONNAGE 1300 KN APPROACH SPEED 100 MM/SEC BENDING SPEED 1 – 10 MM/SEC RETURN SPEED 1-100 MM/SEC OIL CAPACITY 110 LITRES WEIGHT 7800 KG BACK GUAGE STROKE (X AXIS) 700 MM/S MAX GUAGE 1000MM

Condition: used, Used cheap Amada Its 2 2.5metre x 80ton 7axis cnc pressbrake Used cheap Amada Its 2 2.5metre x 80ton 7axis cnc pressbrake PRESS BRAKE HYDRAULIC CAPACITY: 80 TONS BENDING LENGTH: 2500mm CONTROL: OPERATEUR NO OF AXIS: 7 FRONT GUARDS Godpfx Ajfuaqmof Ajbl ERWIN SICK MACHINE MOUNTED SIDE AND REAR INTERLOCKEDFENCING

Year of construction: 1997, condition: used, Technical details: Gbedpfx Asu Nfn Ref Asl pressure: 250 t stroke: ca. 400 mm pass through width: 640 mm table above floor: 900 mm ram stroke speed: regulierbar/adjustable passage between the side columns: 470 mm table clamping surface LxW: 570x550 mm clamping area of ram: 570x550 mm total power requirement: 56 kW weight of the machine ca.: ca. 9,0 t dimension machine xH: 2,5x1,8x3,8 m transport dimensions LxWxH: 2,6x1,8x3,1 m - control manual and via automatic via SPS Allen Bradley - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and safety curtains installed - no CE certification available i.D. *

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 900daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 103 Lt./min (REXROTH - Axialkolbenpumpe)motor: 22 kw - 1500d / minmessurements (LxWxH): 2000x3200x4300weight approx.: 10.000oil filling: 700 Capacity: 250 tons (at 245 BAR) Operation : Via key switch Manual / set-up mode using two hands without light sensor Automatic via two-hand operation at full speed with light sensor Main cylinder: Ø 350 mm Auxiliary cylinder: 2 pcs. Ø 80 x 60 mm Motor: 22 kW. – 45 hp. Pump: 103 lt./min REXROTH - axial piston pump Speed: Forward 120mm Pressure 13-4mm return 170mm./sec. Clear width: 1100 mm Table top: 1000x1000 mm/ with T-slots Ram plate: 1000 x 1000 mm./ with T-slots & spring welds Installation height: 600 mm (max. distance between table & ram plate) Gbjdpfx Ajgta Rcsf Ajl Stroke length: 400mm max Table height: 900 mm floor to table top edge Hydraulics: Block & Valves ( REXROTH ) (Hydraulic Accessory on Top of Press) priming valve Hydraulic & mechanical ram protection Pressure setting via PLC (min. pressure 35 ton) Speed setting via PLC. Pressure hold valve for 600 sec. Air cooler (temperature control adjustable via screen) Automatic lubrication for guides (adjustable via screen) Side of the working area closed with sheet metal wall Guide rails for parallelism Auxiliary engine: 5.5 kW+ 2.2 kW Auxiliary pump: 22cc.+5.5cc Safety rails around the hydraulics and side ladder Oil tank: 800 liters Oil quantity: approx. 700 liters Control: SIEMENS S7 - 1200 main switch box Giftable control panel Soft starter for engine Safety PLC: Sick PLC screen 9'' Siemens Two hand operation (movable) Ruler measuring stick for setting the stroke length 450 mm. - NOVOTECHNOLOGY Light sensor for the front and back of the work area - SICK 900 + 150mm. SECOME & Ethernet connection for remote maintenance - Siemens Working space lighting 2 compartment 8 free inputs and outputs on the PLC Automatic print refill if lost Operating instructions in German hydraulic plans control plans

Condition: new, pressure: 100 toStroke/min: 50table clamping area: 600 x 780tappet measurements: 240 x 400Stroke adjustment: 20 - 130Tappet adjustment: 100daylight: 400PK100 Eccentric Press Capacity: 100 tons Strokes per minute: 50 spm (adjustable) Table size: 780 x 600 mm Ram size: 400 x 400 mm Stroke adjustment: 20 – 130 mm Ram adjustment: 100 mm Installation height: 400 mm Accessories: Control system: Siemens S7-1200 Gsdpfxjr I H Dgs Af Ajbl Display: Siemens 9’’ screen Stroke path adjustment Min & max stroke rate adjustment Automatic central lubrication Safety PLC: PILZ or SIEMENS Dual-channel safety control cabinet Light curtain: SICK, PILZ, or LEUZE, Cat 4 CE-compliant system 2 pcs. shear plates Bottom support plate for transport Under-grip protection Pneumatic clutch & brake combination

Condition: new, pressure: 60motor: 11daylight: 450stroke lenght (max.): 400table diamension: 600 x 500 x 80tappet area: 600 x 500 x 90table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.700weight approx.: 4.000oil filling: 200 Control / Key switch:         Godpfx Afemmuq Ij Aebl 1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 150mm. Auxiliary cylinder: 2 pcs. Ø 60 x 40mm. Auxiliary guide: 2 pcs. Ø 40mm. Motor: 7,5kw. - 11hp. ( IE-3 ) Pump: 18cc. - 26Liter / ASC. Speed : flow 110mm./sec. - return 120mm./sec. - Pressure : 11mm - 5./sec. Installation height: 500mm. Stroke length: 400mm. Table top: 600 x 500 x 80mm. - (with T - grooves) Plunger plate: 600 x 500 x 90mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 7 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, pressure: 100 toStroke/min: 50table clamping area: 900 x 700tappet measurements: 500 x 350Stroke adjustment: 20 - 130Tappet adjustment: 100daylight: 400EEP-PK100 ECCENTRIC PRESS- Pneumatic coupling & brake combination - Hydraulic overload protection ( ¤2,800 due to the large working area, it is recommended )  - Capacity: 100 tons   - stroke/min. : 50 spm  - Table: 900 x 700 mm  - Pestle: 500 x 350 mm  - Stroke adjustment: 20 – 130 mm  - Plunger adjustment: 100 mm  - Installation height: 400 mm Accesories : - Stroke adjustment  - Min/stroke setting  - Automatic central lubrication  - Security PLC: PILZ or SIEMENS  - Two-channel fuse control cabinet  Gbodpfx Ajv Hin Eof Asl - Light barrier: SICK, PILZ or LEUZE,  - Cat 4. CE. system  - 2 pieces. Fracture plates  - Bottom support plate for transport  - Underreach protection