Used Single-Sided Polishing Machine With Direktantr for sale (83,421)

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 5 h, machine/vehicle number: 6178, total width: 1,650 mm, total length: 600 mm, total height: 2,200 mm, overall weight: 295 kg, grinding wheel width: 75 mm, grinding wheel diameter: 300 mm, power: 4.4 kW (5.98 HP), grinding width: 50 mm, Exhibition machine: ACETI ART.70 Belt grinding and polishing machine with 2 motors 4.4 kW, 400 volts including 2 inverters T2 The machine is in our test room in Kobenz. Machine is new and has not run! GRINDING UNIT (left) - Sanding belt dimensions: 50 x 2500 - 3000 mm - Drive roller: 50 x ø 250 mm - Belt grinding arm: 0° - 90° - Belt speed: 18 - 36 m/sec POLISHING UNIT (right) - for grinding and polishing wheels: 300 x 35 mm - Brush maximum external size: 300 mm - Brush maximum width: 75 mm - Motor shaft diameter: ø 35 mm Nedpoi Hp Nrsfx Ab Ujlg - Circumferential speed: 22 - 44 m/sec Size: W: 1650 x D: 600 x H: 2200 mm Volume: 73dB Weight: 295kg (without inverter)

Condition: used, functionality: fully functional, Polyservice D2 tribo-finishing machine, equipped with a noise-reduction enclosure and a remote control unit. Nsdpezrpkmofx Ab Uelg

Condition: used, Year of construction: 1969, Used machine Year of manufacture: 1969 Runs perfectly Max. working width: 170 mm Max. working height: 130 mm 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5th shaft: top Nlodpfxjxavtqj Ab Uog Availability: short-term Storage location: Röllbach

Condition: used, Year of construction: 1985, Working width: 180 mm Working height: 120 mm Number of working spindles: 4 Spindle arrangement: bottom, right, left, top Nodpfx Abszdzbns Uelg Motor power, bottom spindle: 3.7 kW Motor power, right spindle: 3.7 kW Motor power, left spindle: 3.7 kW Motor power, top spindle: 5.5 kW Adjustment, bottom spindle: - Adjustment, right spindle: - Adjustment, left spindle: handwheel Adjustment, top spindle: electric Planer heads: reversible knives Feed rate: 2 Feed roller pressure: spring-loaded Power consumption: 38 A Motor brake: automatic Dust extraction connection: Machine length: Machine width: Weight:

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 101 S PVC Tek Köşe Kaynak Makinası, - Conforms to CE standards. - Weldable angle : All angles between 25 - 180 degrees. - Welded profile maximum height 150 millimeters - Minimum height of welded profile 40 millimeters - Upper pistons are individually compressible - Left moving table system available - Profile clamping is practically done with the pedal Nljdjra Niaopfx Ab Ujg - PLC control system available - The heating unit has thermostatic control - The degree of the heating plate can be easily changed via the digital display - Heat temperature, welding time and pressure can be adjusted for different profile types - Time saving thanks to easy mold change system.

Condition: used, Year of construction: 2001, Professional 4-side sanding machine OMEF model LEVIG (year 2001). This high-performance machine is equipped with an extensive configuration of sanding aggregates, ensuring precise and efficient processing of wooden components from all four sides simultaneously. Perfect for advanced woodworking and manufacturing shops. Aggregate Configuration: 1. Bottom 2. Top 3. Transverse top 4. Transverse bottom 5. Right vertical 6. Right horizontal Nodpszmgbxefx Ab Uslg 7. Left vertical 8. Left horizontal Technical Specifications: • Manufacturer: OMEF • Model: LEVIG. 1NT-1NLLsx + 1NT-1NLLdx • Year of manufacture: 2001 • Total power: 16.74 kW • Working pressure: 5 - 6 bar • Weight: approx. 2000 kg Workpiece dimensions (min. / max.): • Thickness: 10 / 70 mm • Width: 20 / 90 mm • Length: 400 / 2900 mm Machine dimensions: • Length: approx. 7.0 - 8.0 m • Width: 2.2 m • Height: 2.0 m

Condition: used, Brand: Macrotec Nodpfx Abjzqhp Sj Ujlg Model: RA7 Serial number: 0707812 Type number: A25 Condition: Used Price: € 400,- ex VAT

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Manufacturer: UHLIG, Type UB 22 Year: 1995 Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Rotational speed: 5.6 – 54 l/min Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dimensions: approx. 1.00 x 0.90 x 1.20 m Weight: approx. kg (not specified) Equipment: Njdsyw Rhmspfx Ab Uolg - Control with frequency inverter - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed - Fresh water rubber hose - Waste water drain connection All details are subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Technical specifications: Max. planing width: 120 mm Max. planing height: 70 mm Spindle diameter: 30 mm Number of spindles: 8 Spindle arrangement: bottom, right, left, top, bottom, top, right, left Dust extraction nozzle diameter: 6 x 120 mm Infinitely variable feed rate adjustment: 4-24 m/min Nodpfjzgut Nsx Ab Uelg Feed via universal joints Power supply: 400 V Total power: 17 kW Overall dimensions: Length: 3050 mm Width: 1200 mm Height: 1200 mm

Condition: used, Technical specifications: Max. planing width: 120 mm Max. planing height: 70 mm Nsdpfezgup Rsx Ab Ujlg Spindle diameter: 30 mm Number of spindles: 7 Spindle arrangement: bottom, right, left, top, bottom, top, left Diameter of the dust extraction port: 7x120 mm Adjustable feed rate: 4-24 m/min Feed via universal joints Power supply: 400 V Total power: 17 kW Overall dimensions: Length: 2550 mm Width: 1050 mm Height: 1200 mm

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Nledpfx Abszrg T Eo Ujg Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: used, Technical details: grinding table: inclination: nein Grad voltage: 220 V machine weight approx.: 44 kg space requirements of the machine approx.: 0,3 x 0,45 x 1,1 m Disc right: Ø 150mm x W: 50mm; disc fitted with emery burrs Njdpfeu Ng Sqex Ab Uolg Disk left: Ø 125mm x W: 50mm; disk equipped with emery burrs support on both sides Machine mounted on stand with base plate. Operation via on/off switch *

Condition: used, Technical details: wheel diameter: 780 mm table height above floor: 800 mm Table dimensions: 890x190 mm grinding table: inclination: neigbar Grad total power requirement: ca. 2,0 kW weight of the machine ca.: 0,2 t space requirements of the machine approx.: L:1,2xB:1,05xH:1,3 m Double Disc Grinding Machine - Its based on a molding machine body foundation as a whole. - application range: metal, wood, plastic - ginding disc surface diameter:680mm - grinding disc material: sand paper - sucction noozle: 80x120mm * Njdpsu Ng Rtsfx Ab Ujlg

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1000 (maximum part processing length 1000 mm, respectively), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. Njdpjw Avptofx Ab Ujlg New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1500 (maximum part processing length 1500 mm), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. Nledpfjw Au A Esx Ab Ueg + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-980 SA Nedjdzqn Dspfx Ab Ujlg Serial No. 15.207, Year of manufacture 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working container / gross volume max. 980 liters Usable volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Speed 1000 to 1700 rpm, stepless Motor power 22 kW Mains connection 400 volts, 50 Hz - Operating time adjustable manually and via timer - Stepless motor speed adjustment via DANFOSS drive controller, type VLT 3032 (frequency inverter) - Manually adjustable eccentric balance weights - Container with rubber lining - Sound-insulated cover with pneumatic cover opening - Manual separating flap - Integrated screen separation device after the separating flap - Liquid connection - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Partition cover with perforated screen - 1 crate of pyramid-shaped grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm Weight 2500 kg Good condition Functional description: Workpieces and grinding media are set in motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the grinding media causes deburring and surface finishing of the workpieces.

Year of construction: 1994, condition: used, Dimensions: H = 1600 mm Nodolp Iibspfx Ab Uolg L = 1200 mm D = 1100 mm

Condition: used, Stretch blow molding machine by Etek ISBM line = Injection stretch blow molding Stretch blow molding machine for single-use PET bottles made from PET preforms Stretch blow molding machine for production using the rotary process Manufacturer: ETEK / GF-Industries, Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Nledpfx Aokucxleb Ueg Mains connection: 400 volts, 50 Hz Weight: approximately 6000 kg In like-new condition

Condition: good (used), Year of construction: 2001, total width: 700 mm, total length: 1,050 mm, total height: 1,400 mm, disc diameter: 250 mm, overall weight: 100 kg, Double brush polishing machine, with 2 exhauster stands, Motor 2-speed, 1,3 / 1,7 KW, speed 1400/2800 rpm., Dia brushes 250 x 25 x 60 mm, dimension 1050x700x1400 mm, weight 100 kg Nedpfewhzh Eox Ab Uslg

Condition: refurbished (used), Year of construction: 2008, functionality: limited functionality, operating hours: 20,000 h, power: 60 kW (81.58 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total width: 11,000 mm, total length: 12,000 mm, air pressure: 8 bar, pressure: 8 bar, Glass grinding/polishing line consisting of a loading manipulator, four-sided processing unit, and Triulzi washing machine. The equipment is dismantled and stored in a warehouse. The seller undertakes to assist with commissioning the equipment at the buyer's premises. The condition of the Busetti manipulator is as-is (very good condition). The Busetti P4 processing line has undergone a complete overhaul. The Triulzi washer has been partially refurbished. Nlodpfjxxaitjx Ab Usg

Year of construction: 1999, condition: excellent (used), Max. Saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 manual controls Pneumatic material clamps Nledjucpqtjpfx Ab Ueg Minimum quantity spraying device Table can be rotated on both sides with locking points at 45° Roller conveyor 4000 mm and stops 4400 mm

Condition: new, Year of construction: 2026, Simply top - and practically as if by itself The automatic pointing machine from VKM Nlodshm S Ruopfx Ab Ujg The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Behind this is a sophisticated system that allows all production steps to be carried out with maximum precision at maximum speed. Perfect for all logs that are already milled and/or peeled and waiting for their final shape as posts, poles or palisades. Simply point - and practically by itself The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Both models allow three process steps - coping, pointing and chamfering - to be carried out fully automatically at the same time. Without slowing down the production flow: For example, the single-length machine can handle up to 4,000 wood piles and more in single-shift operation. The powerful geared motors run up to top performance via frequency converters - for maximum speed in cutting and cycle time optimization. This has a particularly positive effect when handling different diameters: the processing speed can be easily adapted to the logs.

Condition: new, Year of construction: 2026, functionality: fully functional, Versatile hamburger, hot dog bun, roll-bread, panini and etc slicer-cutter. Available cut options: full cut, partial cut, two sided cut (butterfly). Suitable for products with dimensions: width up to 150mm, height up to 80mm. Adjustable cut height and width, adjustable conveyor and cutting speed. Capacity approx 100pcs/min. Nodpjinwg Iofx Ab Ujlg With castor wheels, fully stainless steel, CE, made in Europe Condition brand new, with warranty, ready on stock for shippment.

Condition: new, Year of construction: 2025, Case Maker with Robotic Hand – High Efficiency Book Cover Machine We are offering a high-quality case making machine designed for the production of book covers, notebooks, and similar hardcover products. Equipped with a robotic hand, this machine ensures precision, consistency, and efficient handling during the production process. It is suitable for working with a wide range of materials, including gray board, MDF, wooden boards, mirror board, as well as various cover materials such as art paper, specialty metallic papers (gold/silver), fabric, and velvet. Nsdpjy Dqx Sofx Ab Uelg Ideal for print shops, binderies, and packaging manufacturers looking to improve productivity and product quality. Working speed: 15-28 pcs/min Max hardcover size: 460x300mm Min Hardcover size: 55x60mm Case Thickness range: 1-12mm Cover Thickness range: 100 -250 g/m2 Case materials range: Gray board, wooden board. mdf, mirror board Cover materials range: Art paper, Silver/gold paper, Fabric, Velvet Machine dimension: 1150x1500x1700mm Machine weight: 650kg

Condition: used, SSTOW single-sided cantilever racks – used – excellent condition. The STOW wall-mounted cantilever rack is constructed of solid, heavy-duty steel profiles (I-beams) with high strength. It is equipped with 5 arms. The cantilever rack can be expanded with additional sections (modules), adapting it to changing storage needs. The offer applies to a STOW single-sided cantilever rack with 1 or 2 modules (IPE 300): Product code: MPP001696 Height: 750 cm Depth: 157 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg I-beam profile cross-section height: IPE 300 mm Net price: €959.00 net per 1 module/section. Product code: MPP001698 Height: 750 cm Depth: 200 cm Number of levels: 0 + 5 Load capacity per arm: 1500 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1079.00 net per module/section. Product code: MPP001697 Height: 750 cm Depth: 217 cm Number of levels: 0 + 5 Nljdpfxox Igwro Ab Ueg Load capacity per arm: 1500 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1195.00 net per module/section. Product code: MPP001702 Height: 750 cm Depth: 157 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1,909.00 net per module/section. Product code: MPP001704 Height: 750 cm Depth: 200 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1500 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €2,129.00 net for 2 modules/sections. Product code: MPP001703 Height: 750 cm Depth: 217 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1,500 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €2,429.00 net for 2 modules/sections. In addition, we have large quantities of storage racks from various companies, e.g. MECALUX, STOW, MAGO, BITO, SHAFER, WDX, SLP, DEXION PROMAG, etc., with high load capacity, available, undamaged, in very good technical condition, as well as comprehensive products for them, such as crossbars, mesh shelves, WEMA grates, bumpers, mounting anchors, etc. Of course, if you have your own transport, you can collect the goods from our warehouse in Chmielów 39-441 in Poland. * I have large quantities. * Transport possible throughout Europe. * Location: Poland