Used Stem B10X12,5S/W3A/Sk for sale (7,183)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Bodpfjy Hkd Hex Af Aewu Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: repair required (used), Year of construction: 1987, machine/vehicle number: 90071000, bale width: 300 mm, bale height: 300 mm, overall weight: 15,000 kg, Currently, the “lateral pressure” is stuck because material (sheet metal) has shifted and become wedged under the side block. Bjdpfxjy Tlzao Af Aowu

Condition: good (used), Code: 0383 Brand: DUE B.ERRE STEMA - ITALY Model: SPINAMATIC GLF HP - CE Standard Machine for applying thick glue and dowels with pneumatic gun for panels, for doors, windows and various - CE Standard Technical data Max insertion capacity 60 dowels per minute Dowel diameter mm 10/12 mm Dowel length mm 25 to 50 mm Max insertion depth 30 mm Machine works with one diameter of dowels at a time Electronic dosing of glue quantity Washing system Flexible arm provided with counterweight that makes the gun lighter during the work cycle (gun weight approx 3 kg) Recommended adhesive type: Water-based emulsion adhesive - Viscosity Brookfield 580 mPa.s - Solids content 30% - Min film formation temperature 3–5 °C - Cleaning with water Bsdpfxsy N Uq Ae Af Ajwu Wheels on base Voltage 220 V single-phase Max pressure 6 atm Overall dimensions mm 600 x 1000 x 2100 h Weight kg 130

Condition: excellent (used), Complete production line for sale for manufacturing round metal rainwater drainage systems. Production starts from a sheet metal coil, then forms, stamps, and packages the products. All machines are in very good condition. The equipment is fully assembled and intended for mass production of: - Gutters - Gutter ends Bjdpfxey I Tq So Af Aswu - Connectors - Corners - Brackets - Downpipe outlets - Elbows - Downpipes - Branch connectors (Tees) - Packaging If you are interested in the offered equipment, have any questions, or would like to receive more detailed information, please do not hesitate to contact us. We will gladly provide the full equipment list, technical specifications, additional photos, or arrange an inspection of the production line. All equipment is connected and can be inspected in operation to see the full production process.

Condition: excellent (used), Applied Biosystems ViiA7 Here we offer an Applied Biosystems ViiA7. Specifications: Block change from the front of the instrument in less than 1 minute; no secondary tools required Supported applications: Standard curve, comparative CT, genotyping, presence/absence, HRM, melting curve Temperature uniformity: ±0.5 °C, within 30 seconds of reaching the target temperature Run time: ~35 min for 96/384-well blocks with Applied Biosystems® Fast Master Mix Supported blocks and volumes: 96-well standard (10–100 μl reactions) 96-well Fast (10–30 μl reactions) • 384-well (5–20 μl reactions) TaqMan® Array Micro Fluidic Cards (~1 μl reactions) Bjdpfozd Ud Njx Af Aewu Detectable sensitivity: up to 1 copy • Excitation/detection wavelengths: 6 excitation (450–670 nm) 6 emission (500–720 nm) • Dynamic range: Up to 9 logs linear dynamic range Resolution: Detects only 1.5-fold changes in target amounts in a singleplex reaction 21 CFR p11 Enablement: Security, audit, and e-signature functions for instrument data Automation: Includes plate loading arm with barcode (distribution, service, and support are provided by Life Technologies) Remote notification: Notifies the user by email when the run starts, stops, or is aborted Data export format: Fully configurable by the user Description: Applied Biosystems Real-time PCR ViiA7. Ideal for performing real-time PCR with medium to high throughput. Interchangeable blocks for 96-well, Fast 96-well, and 384-well plates as well as TaqMan Array Cards. Fast block change. Touchscreen interface. 2x Ethernet connection. 2x USB connection. 1x RS 232 connection. 2x connection on the display. Weight: 67 kg Type: Applied Biosystems ViiA7 Condition: used Scope of supply: (See image) (Changes and errors in technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Instrument Systems Instrument Systems LED Testing Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices are from a laboratory environment, manufactured in 2007–2008, featuring high-quality industrial measurement technology. Scope of delivery / Included components - CAS 140C-152 spectrometer (2008) - Integrating sphere ISP250-110 & ISP250-211 (2008) - LEDGON 100 goniophotometer (2007) Bedpfx Afjzimaas Ajwu - CSD315 3-axis controller + emergency stop control panel (2007) - Keithley 2611 SMU / SourceMeter - PC system including software: - SpecWin Pro - SpecWin Light - Goniometer module - Original license CDs - User manual "LED test sockets" - Cables & accessories as per photos Technical features - Measurement of total luminous flux (lumens) - Spectral analysis (color temperature, CRI, chromaticity coordinates xy, spectrum) - Goniophotometric angular measurement - Analysis of radiation characteristics - Electrical control and IV measurements with Keithley 2611 - Fully automated test procedures with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Total dimensions/weight: approx. 40–45 kg Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Bjdozimgaspfx Af Aewu Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: new, Year of construction: 2026, Automatic grinding thanks to PLC control. Worktable 250 x 500 mm. Bwedszr H E Uepfx Af Asu Magnetic chuck 250 x 500 mm. Maximum table load with magnetic chuck: 180 kg. Servo-driven vertical axis for precise automatic feed. Hydraulic longitudinal table feed. Automatic vertical and cross feed. Worktable speed 7–23 m/min. Grinding wheel dimensions 200 x 20 x 31.75 mm. Spindle motor power 2.2 kW. Total machine power 3.7 kW. Surface roughness up to Ra 0.63 µm. Includes: coolant system, magnetic separator, hydraulic station, lubrication, magnetic chuck, PLC controller, and touchscreen. The automatic vertical feed range includes values ​​of 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm/stroke, allowing you to adjust the operating parameters to the type of material, required accuracy, and desired surface finish. Another model with a larger worktable is available: the SMP3063AHD (635 x 305 mm) and costs €22,000.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2007, total length: 13,670 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 30 %, wheelbase: 9,000 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 30% Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 7.920 kg Carrying capacity: 34.080 kg Bjdpfx Afjzvdrto Aewu GVW: 42.000 kg Identification Registration number: OK-21-BL

Condition: used, Ampere Rack Armour® shelf support protector, size M. Condition: used, good condition Manufacturer: Ampere System Product: Rack Armour® Bwedpfx Afozux Exe Aeu Size: M Suitable shelf support width: 88–100 mm Height: 600 mm Outer shell material: HDPE (high-density polyethylene), wall thickness > 7 mm Inner material: Highly flexible energy-absorbing foam Weight: approx. 1.2 kg Color: signal yellow Impact absorption: frontal impact up to 2.4 t Assembly: can be done without tools (assembly aid recommended), no floor fastening required Availability: we have several in stock, please inquire about the desired quantity! Accessories such as: Floor fastening Connectors Load warning signs Impact protection Guardrails Grating Back wall grating Depth stops Barrier railings and much more... Just ask us! "Benefit from over 20 years of industry experience – we provide you with competent and personal advice as your experienced specialist dealer for new and used shelving systems." Sales & Delivery Conditions (B2B) - Prices & Logistics: All prices are net, ex warehouse. Express delivery via our own fleet is possible after individual consultation. - Offer Status: All offers are subject to change. Items are subject to prior sale. - Reservation of Ownership: The goods remain our unrestricted property until full payment (no right of disposal or processing). - Warranty: Exclusive distribution to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for material defects is excluded. For new goods, the respective manufacturer's guarantees apply.

Condition: excellent (used), Year of construction: 2017, Batch mixer, type WBX 150 1 Control unit for the mixer 1 Manual shut-off valve 1 Separate control panel ("remote control") Technical data for the 150 series, WBH 150: Parameter | Value Nominal volume | 150 l Usable volume | 105 l A | 1,460 mm B | 670 mm C | 754 mm Empty weight | approx. 270 kg Subject to prior sale Please submit inquiries only by email. Note: The machine is in storage and can be inspected on site. Bwsdpfoztwbvjx Af Aju The buyer must arrange for shipping. This is not included in the quoted price.

Condition: good (used), Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track, lightweight roller conveyor -Manufacturer: Soco System, non-driven roller curve conveyor, height-adjustable -Height: max. 710 mm -Rollers: Ø 48 x 15 mm Bwodpfjyw Hwkox Af Asu -Quantity: 1x roller conveyor available -Price: per piece -Transport dimensions: 1470/600/H510 mm -Weight: 23 kg/pc.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: TE6110019, Semi-automatic tamper-evident label dispenser for applying tamper-evident labels diagonally to folding cartons with tuck-in flaps. Bjdpfx Afozqfu Es Ajwu

Condition: used, maximum load weight: 2,187 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 01/2023, loading space length: 3,010 mm, loading space width: 1,830 mm, loading space height: 350 mm, total width: 2,290 mm, total height: 2,785 mm, A48 GW26000051 Bwodpfx Afoytzubo Asu Low-bed trailer by STEMA, model SySTEMA ST 27-30-18.2, equipped with tarpaulin and Premium frame, 150 cm (185 cm internal height), gross vehicle weight: 2,700 kg, with overrun brake, 100 km/h Subject to errors and prior sale.

Condition: new, Year of construction: 2020, functionality: fully functional, input voltage: 400 V, warranty duration: 12 months, product height (max.): 800 mm, input frequency: 50 Hz, workpiece weight (max.): 40 kg, Equipment: documentation/manual, type plate available, SITEC TO800CAB1T automatic system for circumferential MIG welding with a single torch, featuring numerical control with an integrated PLC, a 7" color touchscreen, program management and storage, and provision for remote assistance and network connection. Key features: Maximum workpiece diameter: Ø 400 mm Maximum length: 800 mm Workable thickness: 2.5 mm Material: Steel (Fe) Maximum load capacity: 40 kg Welding process: MIG Motorized rotating head with variable speed, 0.3–3 rpm Rotating table, Ø 400 mm Bwsdpfx Aozry Tfof Aju Tailstock with 150 kg thrust Automatic pneumatic lifting system 1 torch adjustment slide 1 pneumatic torch positioning system 2 rotating clamps, 500 A Fully enclosed protection cabin with internal lighting and fume extraction Complies with CE regulations Machine designed to ensure high precision, repeatability, and productivity in the circumferential welding of cylindrical parts. Ideal for industrial production and series processing. Condition: New – available for inspection and testing by appointment. Contact us for further information, photos, and pricing.

Condition: new, table length 2000 mm table width 1200 mm table height 200 mm bore 28 mm weight 843 kg Specifications - High-quality S355J2+N steel + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole diameter 28 mm - Holes in 100×100 mm grid pattern - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing on side panel: 50 mm - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise set-ups - Special equipment for welding tables is available on request. Bodpfjznngrex Af Aewu

Condition: new, table length 1000 mm table width 1000 mm table height 200 mm bore 28 mm weight 400 kg Special item - Material thickness varies; can only be clamped with bolts 280536 or 280532. Not compatible with quick-release bolts Features: Bwodpszzd U Sofx Af Aju - 4 legs - Standard configuration 650 mm - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Side panels made of high-quality steel S355J2+N + plasma nitriding - Hole Ø 28 mm - Holes arranged in a diagonal grid on the surface - Corners, edges, and holes are rounded - Side panel height: 200 mm - Holes in the side panel arranged in a diagonal grid - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise setups

Year of construction: 2021, operating hours: 30 h, condition: like new (used), functionality: fully functional, 1 x Unifiller Systems Inc. food depositor mounted on a mobile height-adjustable frame. This is a compact, versatile machine which is easy to clean for a quick product changeover. Handles most fillings without particulates Manufacturer - Unifiller Systems Inc. Model - iSpot. Serial number - ISP103177-001-01. Date of manufacture - 2021. Bjdpfxsyv E Ryj Af Aswu Depositing range - 35ml to 237ml (2'' cyclinder). Speed - adjustable, up to 150 deposits / minute depending on product type and volume. Operating temperature - up to +60C. Fits containers up to 23” deep (80 quart Hobart bowl). Condition - full working order and excellent condition for its age. Used sporadically over a period of around 5 months and is believed to have had less than 30 hours of run time.

Condition: ready for operation (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, Equipment: compressor, documentation/manual, The Morgana Major folder is a compact, high-performance folder with two fold plates. It is designed for short-run digital and commercial print shops. Built for reliable, easy-to-use folding of brochures, leaflets and booklets, it offers quick job changes and consistent fold quality for mixed media. Its simple setup and robust air feeding system make it a best choice for finishing departments seeking speed and repeatable results. Maximum sheet size: 648mm x 365mm Bwodpjz Agvbsfx Af Aeu Minimum sheet size 148mm x 140mm Maximum paper weight 240 gsm Minimum paper weight 56 gsm Load capacity 500 sheets 80 gsm Speed up to 27.000 A4 sheets per hour

Condition: reconditioned (used), functionality: fully functional, Lamina System Semi automatic laminator SA 1416. In very good technical condition, after total renovation. Machine on power, can be tested. Max. sheet size: width: 1400 mm length: 1600 mm Min. sheet size: width: 200 mm length: 350 mm Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bsdpfxewz Ev Tj Af Aewu Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Automatic substrate feeder with continuous sheet feeding The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 2350 mm, length - 4600 mm.

Year of construction: 2007, condition: excellent (used), Tops Vendingsystem Fresh fries in 90 sec Options: can be places inside and outside freezer with storagebox 150 portions automatic weighingsystem automatic oilinjectionsystem electronic controlsystem of the oil quality automatic distribution of sauce, cutlery and napkins choices of 4 sauces easy to use energy consumption per serving energy conservation oil temperature Dimesions: 1850 x 1010 x 885 mm Weight: 320 kg 220 V, 50 Hz Bwjdpfx Asfnbltsf Asu

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total width: 500 mm, total height: 750 mm, load capacity: 80 kg, roll diameter: 50 mm, roll width: 410 mm, Easysystem Checkweigher roller conveyor with weighing unit Easysystem scale roller conveyor for sale in new condition year of manufacture: 2022 weight measurement 0-25kg /0-80/kg load cell: 4x Dini Argeo FCX C3 20KG TR display: Dini Argeo DGT1S multifunctional, digital weight transmitter/display Bwsdpfovbdlzsx Af Aeu interface: Dini Argeo Profinet 1s RS485-ProfiNET interface, for DIN-rail mounting. With UL marked PCB, terminal blocks roller conveyor length: 990mm roller width 400mm track total width: 520mm height: 730mm bearing-mounted galvanized steel rollers with belt drive

Condition: used, axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 01/2005, total length: 12,300 mm, total width: 2,550 mm, wheelbase: 7,900 mm, Year of construction: 2005, Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Empty weight: 10.480 kg Carrying capacity: 8.520 kg GVW: 19.000 kg APK (MOT): tested until 05/2027 Registration number: OH51TV00 Liborary, race, camper trailer In combintation MAN TGL 15.290 Bwsdsz D U T Uopfx Af Asu Year 2019 Steering axcle Self support, battery sets Disabled lift Set price 39.500,-- euro netto

Condition: used, PCB handling equipment from E-Flex SMT microsystems: WHM-106SD3TM-Al (2022) price: €6,878 WHM-330SD0TXL-AIR(UXL)C (2023) price: €5,367 WHM-201SDNTM-I (2022) price: €3,832 WHM-201SDNTM-I (2022) price: €3,832 WHM-200SD3TM-I (2022) price: €3,338 WHM-201SDNTM-I (2022) price: €2,899 WHM-201SDNTXL-IA(SD2) (2023) price: €5,739 WHM-200SD3TM-IA (2022) price: €3,439 Bwjdsx Tzn Aopfx Af Aju WHM-200SD3TM-l (2022) price: €3,738

Condition: good (used), 3D Systems ProJet MJP 2500 Plus MultiJet 3D Printer Description: Professional MultiJet 3D printer / MJP system 3D Systems ProJet MJP 2500 Plus MultiJet Printing with HD and UHD printing mode For sale is a used professional 3D printer from the manufacturer 3D Systems. The ProJet MJP 2500 Plus is suitable for the production of precise plastic components, functional prototypes, concept models, as well as jigs and tool applications. Technical data: Bwsdpfx Afoz Erdas Aou Manufacturer: 3D Systems Model: ProJet MJP 2500 Plus Technology: MultiJet Printing (MJP) Printing modes: HD / UHD Max. build volume: 294 × 211 × 144 mm HD mode: 800 × 900 × 790 DPI Layer thickness: 32 µm UHD mode: 1600 × 900 × 790 DPI Layer thickness: 32 µm Dimensions: 1120 × 740 × 1070 mm (W × D × H) Weight: 211 kg Power supply: 200–240 V / 50 Hz / 1-phase / 10 A Internal hard drive: at least 500 GB Operating temperature: 18–28 °C Interfaces: Ethernet USB Features: Integrated touch display Material system for build and support material Automatic material bottle switching Network connection USB port 3D Sprint software support Material containers as shown in the pictures Applications: Functional prototypes Concept models Form and fit testing Jigs and fixtures Tool applications Product development Additive manufacturing Scope of delivery: 1 × 3D Systems ProJet MJP 2500 Plus Material containers as shown in the pictures Other accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Shipping by freight forwarder possible. Subject to changes, errors and prior sale.