Used Tricool Thermal Oil Heater for sale (12,942)

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 300-2000 CX Injection Molding Machine Year of manufacture: 2010 Control system: MC5 Type: Hydraulic injection molding machine Equipment Fully hydraulic clamping unit MC5 control system with a color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials 70 mm screw with abrasion protection Check valve Open nozzle Clamping Unit Clamping force: 3000 kN Platen dimensions: 995 × 1050 mm Tie bar spacing: 630 × 630 mm Ijdpfx Acezkaflsastk Opening stroke: 820 mm Maximum opening: 1150 mm Minimum mold height: 330 mm Ejector stroke: 200 mm Ejector force: 57.7 / 28.3 kN Injection Unit Screw diameter: 70 mm Injection pressure: 1877 bar Injection volume: 1078 cm³ Injection weight (PS): 981 g Injection rate: 385 cm³/s Injection rate with accumulator: 1155 cm³/s Screw speed: 220 / 310 rpm Plasticizing Unit For thermoplastic materials Abrasion protection Check valve Open nozzle Electro-hydraulic System Pump motor power: 55 kW Heater power: 29.2 kW Number of heating zones: 6 Number of dry cycles: 1350 cycles/h Oil tank capacity: 720 l Dimensions and Weight Dimensions: 6500 × 2200 × 2300 mm Weight: 14.5 t

Condition: ready for operation (used), Year of construction: 2005, A complete 8-color Fischer & Krecke flexographic printing system is available. Number of colors: 8, max. print width: 1250mm, max. material width: 1300mm, repeat print length min./max.: 320mm/800mm, max. mechanical speed: 360m/min, printable materials: PET (min. 12µm)/PP/OPP/LDPE/laminate materials. Inks: solvent-based, drying: thermal oil. Roll diameter: 800mm, core diameter: 76mm/152mm. Including BST Video Web Inspection System Premius, cleaning system Flexpress AutoClean (ACA), viscosity control Bloss Viscolor 1300, automatic roll change and rewind Flying Splice as well as an additional chill roll with a diameter of 460mm. Documentation available. On-site inspection is possible. Itsdpfjvva E Hjx Acask

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressure: 14 bar, operating pressure: 14 bar, For sale: Stöckel steam boiler with Saacke oil burner. Optional gas burner available on request. Complete with water heater up to 250 degrees. The unit is in very good condition. Itjdjyllf Iepfx Acajk Steam output: 12,000 kg/h. Maximum steam pressure: 14 bar. Delivery available at extra cost. On-site inspection possible. If you have any questions, please feel free to contact us.

Condition: ready for operation (used), Year of construction: 2023, clamping force: 2,500 kN, screw diameter: 55 mm, overall weight: 8,400 kg, Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA 2500 III features a clamping force of 250 tons and a platen size of 850 x 850 mm. The machine includes an impressive injection pressure of 1850 bar and a screw diameter of 55 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA 2500 III machine we have for sale. Contact us for further details regarding this machine. • Clamping unit • Opening force: 165 kN • Platen size: 850 x 850 mm • Opening stroke: 540 mm • Tie bar distance: 580 x 580 mm • Max mould height: 580 mm Itodpfsy N Sqmex Acaok • Min mould height: 220 mm • Ejector stroke: 150 mm • Ejector force: 62 kN • Min mould dimensions: 410 x 410 mm • Injection unit • Euromap classification: 1000 • L/D ratio: 20 • Shot volume: 570 cm³ • Effective injection volume: 519 g • Injection rate: 281 g/s • Plasticizing capacity: 47.7 g/s • Injection pressure: 1850 bar • Screw speed: 180 rpm • Screw stroke: 240 mm • Carriage force: 99 kN • Pump motor power: 37 kW • Heater power: 21.45 kW • Oil tank capacity: 340 L • Dimensions • Machine size: 6.19 x 1.60 x 2.42 m • Control • Controller: KEBA 2985 – CP053 • Features: • 15” colour touchscreen • Euromap 67 robot interface • USB memory • 200 mould memory • Cycle history • Alarm tower • RFID login/password • Multilanguage interface • Process graphs • Maintenance pages • Metric / imperial selectable • Included options / extras (machine-integrated) • Bimetallic screw + barrel • Masterbatch dosing interface • Hydraulic radial extraction • Festo air blow system • 12-zone PSG central lubrication • 4-way flowmeter • Robot interface • Included screw H 3 zones • CE certified work cell Additional equipment • Robot included: HILECTRO V-1300ID Cartesian Robot (2023) • Type: 3-axis servo Cartesian robot • Suitable for: 380T to 530T presses • Travels: X 2000 mm / Y 880 mm / Z 1300 mm • Max extractable weight: 12 kg • Power: 400 VAC / 50-60 Hz • Precision: 0.1 mm • Robot weight: 530 kg • Included: Touchscreen controller, USB programs, pneumatic gripper, vacuum cups, conveyor ready • Peripherals included: FORMAX E3 Monofase Hopper Loader (2 units) • Hopper capacity: 3.0 L • Power: 1150 W • Inlet diameter: 40 mm • Capacity: 70 kg/h • Voltage: 230 V • Weight: 13 kg each

Condition: excellent (used), Year of construction: 2002, plate length 3500mm plate width 1300mm solid steel plates oil heating with included heater 8 hydraulic pistons pistons diameter 85mm total pressure 160 tons Iedpjx Sqlzjfx Acastk safety line switch year 2002

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX injection molding machine Year of manufacture: 2008 Robot: Wittmann Control: MC5 Equipment Fully hydraulic clamping unit MC5 control with color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials Screw Ø 120 mm with abrasion protection Check valve Open nozzle Clamping unit Clamping force: 11,000 kN Opening force: 770 kN Platen dimensions: 2210 × 1910 mm Distance between columns: 1550 × 1250 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum mold height: 1200 mm Maximum opening: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1758 bar Injection volume: 6786 cm³ Injection weight (PS): 6175 g Screw speed: 103 / 145 rpm Injection rate: 1118 cm³/s Injection rate with accumulator: 1696 cm³/s Ijdezkanyspfx Acaotk Plasticizing unit Designed for processing thermoplastic materials Version with abrasion protection Check valve Open nozzle Electro-hydraulic system Pump motor power: 132 kW Heater power: 82 kW Number of heating zones: 7 Number of dry cycles (Euromap): 802 cycles/h Oil tank capacity: 2440 l Dimensions and weight Dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Weight: 73 t

Condition: excellent (used), Year of construction: 2007, turning length: 744 mm, turning diameter: 430 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, Control: CNC path control with 10.4" TFT color display Siemens Sinumerik 840 D powerline TECHNICAL DATA Turning diameter *over bed 600 mm *over cross slide 500 mm Distance between main spindle and counter spindle 975 mm Maximum turning diameter 430 mm Maximum turning length 744 mm Maximum bar diameter 65 mm Workpiece size with counter spindle max. ø 200 x 200 mm Main spindle Drive power 29 kW Speed range 0 – 5000 rpm Maximum bar passage 65 mm Maximum chuck size 200 mm C-axis *Resolution 0.001° Counter spindle Drive power (100/40% ED) 17/22 kW Speed range 0 – 5000 rpm Maximum chuck size 200 mm Travel (Z-axis) 750 mm C-axis*Resolution 0.001° Upper tool holder Disc turret with direction logic Number of stations 12 of which driven 12 Tool holder DIN 69880 VDI 30 Drive power 6.7 kW Speed range 0- 4000 rpm Travel *X-axis 270 mm *Z-axis 750 mm *Y-axis + 50 mm Lower tool holder Disc turret with direction logic Number of stations 12 of which driven 12 Tool holder DIN 69880 VDI 30 Drive power 6.7 kW Iodpfxoyx U His Acaetk Speed range 0- 4000 rpm Travel *X-axis 205 mm *Z-axis 750 mm EQUIPMENT/ACCESSORIES  Full enclosure with electrical interlock and sliding doors and machine light  Bar loader magazine IEMCA TAL/Auto 65/32 for bar length 3000 mm including: -Guide channel -Centering device -Axial displacement  Thermal compensation systems for the integrated spindle motors (liquid-cooled)  Hydraulic cylinder with draw tube for main spindle  Hydraulic cylinder with draw rod for counter spindle  C-axes for main and counter spindle  Transmit software for easy C-axis programming  Y-axis in the upper turret (cutting force distribution on 2 axes, resulting in extremely high rigidity)  Drive unit in the upper and lower turret  Part ejector and flushing through the counter spindle  Part removal device for the finished parts Finished part max. ø 65 x 200 mm Finished part weight max. 4.5 kg  Conveyor belt for removing the finished parts from the machine  Turret steady rest including VDI 30 base mounted above the coolant supply (14 bar) centrally in the tool turret Diameter range 10 – 70 mm  Coolant system with 2 high-pressure pumps at 14 bar each and 2 flushing pumps at 3.7 bar each  Cleaning gun for cleaning the clamping devices, covers and the entire working area with coolant  Chip conveyor (hinge belt) in extended form for portal design, suitable for: -long steel chips -chip clusters -fibrous chips -dry and wet machining  Electronic oil mist separator 800 – 1000 m³/h  Automatic central oil lubrication for guideways and ball screws  Grease lubrication for main and counter spindle  HAINBUCH collet chuck size 65 for main spindle, without stop (without collets)  Serial interface  Mounting elements  Documentation

Condition: like new (used), Year of construction: 2005, functionality: fully functional, GEARLESS FLEXOGRAPHIC PRINTING PRESS F&K FLEXPRESS 16S/10 Central impression flexographic printing press Manufacturer: Marga Fischer & Krecke Model: Flexpress 16S/10 Gearless 10 colors Materials that can be printed: PE, PP, OPP, PET, PA. Mechanical speed up to 460 m/min Maximum material width: 1200 mm Maximum printing width: 1150 mm Itjdpfxezafipe Acaok Minimum/maximum print repeat: 370/800 mm Fully automatic turret unwinder and rewinder Unwinder inner diameter: 76 and 152 mm Rewinder inner diameter: 76 mm Maximum coil diameter: 1000 mm Thermal oil drying system Corona treater: 2 units AVT 100% camera system Bloss viscometers Year: 2005

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 The machine is designed for thermoplastics processing and is equipped with a complete plasticizing unit in a version with abrasion protection. Itsdpfjyrrwksx Acaek Technical specifications Clamping unit - Clamping force: 13,000 kN - Mold opening force: 910 kN - Dimensions of mounting platens: 2210 × 1910 mm - Tie bar spacing: 1570 × 1270 mm - Ejector stroke: 350 mm - Ejector force: 250 / 125 kN Injection unit - Screw diameter: 105 mm - Injection pressure: 2296 bar - Injection volume: 5195 cm³ - Shot weight for PS: 4728 g - Injection rate: 856 cm³/s Plasticizing parameters - Screw speed: 103 / 145 rpm - Plasticizing throughput (PS): • standard speed: 122 g/s • increased speed (option): 171 g/s Electro-hydraulic equipment - Rated pump motor power: 132 kW - Installed heater power: 71 kW - Number of barrel heating zones: 7 - Dry cycle time according to Euromap 6: 765 cycles/h - Oil tank capacity: 2440 l Dimensions and weight - Net weight with control cabinet: 70 tons - Installation dimensions: 13.03 × 3.65 × 2.82 m

Condition: ready for operation (used), Year of construction: 2021, operating hours: 67 h, clamping force: 1,600 kN, screw diameter: 45 mm, overall weight: 5,900 kg, controller manufacturer: ARBURG, controller model: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) Isdox D E Dyjpfx Acaotk • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information • Screw Diameter: 45 mm • Injection Pressure (Max.): 1580 bar • Shot Weight (Max. g PS): 232 g • Heating Output 9.7 kW | 5 zones • Net Machine Weight: 5900 kg

Condition: used, mileage: 3,16,939 km, power: 132 kW (179.47 HP), first registration: 08/2010, overall weight: 8,600 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, parking heater, soot filter, Body: - Küpper Weisser spreader - Model: STASF VES, year 2010 - ThermoMAT - Suitable for oil spill control - Storage boxes Equipment: - Cab: C (Compact) - Driver and passenger comfort seats, air-suspended - Automatic climate control - Additional air heater Eberspächer Airtronic D2 - Mechanical sunroof - Flame start system - Fuel tank: 200 L - 6-speed manual transmission Technology: - Rear-view camera - On-board computer MAN-Tronic - Electrically adjustable and heated exterior mirrors - Electric windows - ETA circuit breaker - Beacon lights Safety/Environment: - Rear axle differential lock - Engine brake - Electronic braking system MAN-Brakematic - Rear axle stabilizer - EURO 5 engine Miscellaneous: - German first delivery - 1 previous owner - Engine 4.6 L – 132 kW Diesel - Registration: previously self-propelled working machine 'traffic safety vehicle' Itjdpfx Acjwmx Aqjaok - Payload 2,785 kg according to registration certificate - Perm. total weight 8.60 t Since 1972, your reliable partner for all automotive and commercial vehicle needs in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always keeps approx. 200 vehicles in stock, including transporters, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special rates. If interested, we are happy to provide you with an individual offer! Trade-in of your commercial vehicle/construction equipment is welcome. If a new TÜV inspection is desired, we will gladly offer you this service through our partner workshops. Our offer is generally WITHOUT new TÜV inspection. Delivery of your 'new' commercial vehicle can be arranged nationwide by our external partners at an additional cost. All information provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typographical errors and data transmission mistakes. Listed equipment features may need to be verified separately. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2004, Krauss Maffei KM 350–2700 C2+ injection molding machine Year of manufacture: 2004 Control system: MC4 Technical data Clamping unit * Clamping force: 3500 kN (350 tons) * Platen dimensions: 1060 × 1095 mm * Tie bar spacing: 710 × 710 mm * Opening stroke: 920 mm * Maximum opening: 1300 mm * Minimum mold height: 380 mm * Ejector stroke: 250 mm * Ejector force: 95 / 48 kN Injection unit * Screw diameter: 80 mm * Injection pressure: 1829 bar * Injection volume: 1433 cm³ * Injection shot weight (PS): 1304 g * Screw speed: 218 / 284 rpm * Maximum injection capacity: 1508 cm³/s Plasticizing system * Version for thermoplastic materials * Abrasion protection * Check valve * Open nozzle Drive system * Pump motor power: 75 kW * Heater power: 36 kW * Number of heating zones: 7 * Oil tank capacity: 720 l * Dry cycle time (Euromap): 1550 cycles/h Dimensions and weight Ijdpfxjzkadbs Acaetk * Dimensions (L × W × H): 6910 × 2040 × 2410 mm * Machine weight: 16.7 t Additional information * MC4 control system with color monitor * Machine prepared for modernization with the ESS system (energy saving of 30–60%)

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm Iodpfeytn Emox Acastk ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Condition: used, mileage: 1,17,000 km, power: 105 kW (142.76 HP), first registration: 10/2017, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 10/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, total length: 6,856 mm, total width: 2,090 mm, total height: 2,272 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Special equipment: Airbag, passenger side, trailer socket, 13-pole, audio system Audio 10 (radio with CD player), outside temperature display, digital tachograph, downloadable, spare wheel with road tires, spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps, rear, mud flaps, front, seats in the cab: double passenger seat, stabilizer, rear, stabilizer, front, reinforced, storage box left and right below the platform/body, shock absorbers, reinforced, fuel gauge for auxiliary heater, rear wall lining, fleece battery 95 Ah, front axle, reinforced, thermal insulation, driver's compartment, auxiliary heater (air), electric, generator 250 A, auxiliary heater (hot water) Additional equipment: Iodpfx Aezu Uaxscaetk Adaptive brake light, airbag, driver side, display for windshield washer fluid level, exterior mirrors, electrically adjustable and heated, both, exterior mirrors with integrated turn signal, battery 74 Ah, braking system with ABS+ASR, headliner in the cab, glove compartment, lockable, body/structure: platform, double cab, standard, fuel tank: main tank 75 L, headlight range adjustment, model update, engine 2.1 L - 105 kW CDI catalytic converter, wheelbase 4325 mm, low emissions according to Euro 6 emission standard, seat belt system with warning system (driver side), seat cover/upholstery: fabric Lima, seats in the cab: passenger seat adjustable, service interval display Assyst, heat-insulating glazing, permissible gross weight 3.50 t.

Condition: used, mileage: 6,47,000 km, power: 330 kW (448.67 HP), first registration: 03/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, Mercedes Benz 1845 HAD / STREAM SPACE / German vehicle, 1 owner, VIN: ...0252072 Front axle load: 8.0 t, Trailer coupling: Ringfeder towing hitch, Work lights on rear cab wall (top), Audio system: CD radio (Bluetooth), Battery 220 Ah, CB radio, Compressed air horns (2) on cab roof, Driver assistance system: Attention Assist (drowsiness detection sensor), Driver assistance system: Brake Assist (Active Brake Assist), Driver assistance system: Lane Keeping Assist, Cab width: 2.50 m, Cab with air suspension, Suspension: front springs 8.0 t, 3-leaf, Alternator 150 A, Luggage shelf on rear cab wall (top), 12-speed transmission – Type: G 330-12, Rear axle crown wheel 300, Info display 12.7 cm with additional display, Folding table in waist area, Automatic climate control, Fuel tank: 390 l aluminum, left, Cool box / refrigerator, Air intake behind cab, Mounting plate / fifth wheel plate 40 mm for fifth wheel coupling, Reinforced engine brake, PTO MB 131-2c, Premium Comfort lower mattress, Retarder, Fleet management system interface, Drawers under waist shelf, Skid plate under main tank, Circuit breaker, Seats in cab: passenger seat with armrest, Seats in cab: driver’s air-suspension comfort seat, External sun visor, Sunblind for driver’s door side window, Front mudguards, Storage box left under cab, 12V socket in passenger footwell, Extra 12V power socket, 24V / 25A socket in passenger footwell, Stone chip protection grille, Carpet on engine tunnel, Cab door extension, Front underrun protection, Preparation / switch for lift axle on semi-trailer / trailer, Additional thermal insulation, Additional heater (water), Transmission oil cooler Emission standard EURO 6, ABS switchable, Axle configuration: 4x2, Trailer socket 24V / 15-pin, Work lights, Arocs, Exhaust tailpipe to vehicle center, Exterior mirrors electrically adjustable and heated, Rear axle differential lock, Compressed air connection in cab, Steel air tank, Medium compressed air unit, Driver’s cab: movable cab entrance, Driver’s cab: hydraulic tilt, Driver’s cab: L StreamSpace, Suspension: leaf/air, Suspension: front springs 7.5 t, 3-leaf, Electric window lifters, 12-speed transmission – Type: G 281-12, Urea tank (AdBlue): 60 l, Hydraulic Auxiliary Drive (HAD), Body/build: tractor unit, Body variant: standard, Lower comfort bunk, Central locking system, 3-piece mudguard, Non-regulated power steering pump, Air intake at front, 2-stage air compressor, Heated air dryer, Engine 12.8 l – 330 kW inline 6-cylinder diesel (OM 471), Engine compartment encapsulation, Ramp mirror, Residual heat usage, Disc brakes with partial protection, Disc brakes front and rear axles, Seat covering/upholstery: fabric, Seats in cab: functional passenger seat, Stabilizer front axle, 24V socket in cab, Tachograph / EC control device, Toll collection preparation, Straight front axle, Perm. gross weight 18,000 kg Itedpfx Acox Ru H Hjaok

Condition: used, mileage: 3,06,127 km, first registration: 10/2013, axle configuration: 4x4, total length: 10,600 mm, total width: 2,520 mm, total height: 300 mm, Year of construction: 2013, Equipment: ABS, EBS, air conditioning, crane, cruise control, electronic stability program (ESP), power assisted steering, traction control, - Stability control = Additional options and accessories = - Differential lock = Notes = DB ACTROS 4146 AK MP3 8X8 Crane Truck with Fassi 660 Loader Crane / Winch and Slewing Servo !! SINGLE TIRES !! • ALL-WHEEL drive! • Full leaf spring suspension! • EURO 5 • Telligent 16-speed transmission with clutch pedal • Air conditioning • Enhanced engine brake • Cruise control • Auxiliary heater • Hill start assist • 2 x differential locks • ABS deactivatable • Signal horn • Light bar with LED work lights • Rotating beacons • Multifunction steering wheel • Radio-CD player • Telephone • Tires: 395/85 R20 • Good tire tread! • Unladen weight: 22,544 kg • Perm. GVW: 32,000 kg (36,000 kg technically possible!) • Trailer hitch – jaw coupling • Perm. trailer load: 12,500 kg • 2-line trailer brake system • Overall vehicle length: 10,600 mm Superstructure: FASSI 660 XD Type F600A / 660 AXP 24 • Remote control Itodjwmn Tljpfx Acaok • 4 hydraulic extensions • Hydraulic ROTATOR • Hydraulic WINCH • 4-point outriggers • 10-ton lifting beam • Flatbed body MÜLLER with side walls Special equipment: 2-line trailer brake, trailer coupling: G 150, 24V / 15-pin trailer socket, brushed steel dashboard, Audio system: CD radio (Bluetooth incl. permanently installed phone), 220 Ah battery, air horn(s) on cab roof, Cab: reinforced cab suspension strut, Cab: movable cab entry, Cab: comfort suspension (1.8 Hz), construction vehicle filter, 100 A alternator, 400 l fuel tank, reinforced clutch, reinforced cooling, PTO MB 10C, programmable special module, revolving beacon left/right, heat insulated side windows, circuit breaker, Cab seats: comfort driver's seat, air-sprung incl. horizontal suspension, sun visor, sun blind side windows, driver and passenger door, power inverter 24V / 12V 15 A, reinforced rear axle stabilizer, 12 V socket, front bumper in steel, crossbeam for trailer coupling, additional thermal insulation, auxiliary water heater, transmission oil cooler Further equipment: 2nd steered front axle, EURO 5 emission standard, axle configuration: 8x8/4, front axle load 9.0 t, trailer coupling: towing coupling, vertical exhaust muffler behind cab, electric & heated exterior mirrors, steel roof hatch, rear axle differential lock, front axle differential lock, cab: S (short), suspension: leaf/leaf, electric windows, 16-speed transmission, rear axle H 7, 13 t, crown gear 300, hydraulic pump (Meiller pump - 6 pistons), body/superstructure: chassis for tipper (additional AV), body/superstructure: tipper, model revision from 06/2008, engine 12.0 l - 335 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4800 mm, rear window, Telligent transmission, Telligent brake system with ABS, drum brakes front and rear axle, transfer case with differential lock, CB radio prep, phone/fax prep, immobilizer, heat insulating glazing, central locking Cab: single

Condition: used, Year of construction: 2005, year of last overhaul: 2011, CLEARANCE SALE WILL BE SOLD TO HIGHEST BIDDER ON 'FIRST COME - FIRST SERVE BASIS' ; IMMEDIATE SHIPPING POSSIBLE LIST OF OTHER MACHINES FROM SAME MILL AVAILBLE UPON REQUEST Textile Fabric Steamer / Ager AGE 2005, used only for few years ! Then preserved and stored Make : Zimmer Type : Thermocure UHD 3 Universal Loop Steamer for the operation with saturated steam 102 - 104 °C with height temperature steam max. 185°C with hot air max. 170°C Yoc : 2005 , Machine like new , used only few years in one shift, after 2011 preserved Technical Data: Max material width : 200 cms Max material content : 240 meters Loop length : max. 2,8 m Cloth qualities : woven or knitted goods – single width Max. mechanic speed : 5 - 50 m/min. Steaming duration : 5-40 minutes Heating medium : saturated steam: min. 3 bar, max. 8 bar Average steam consumption :approx. 500 - 1000 kg/h Heating medium for high Itodpjy A S Uxofx Acask temperature operation: Thermooil, 280°C, 12 m³/h, approx. 280 kW Service voltage : 3 x 400 V 50 cy. Control voltage : 230 V 50 cy Electrical drive and air fan capacity: approx. 28 kVA Compressed air : ½” , 6 bar + Thermal-oil heating unit for high temperature steam operation type HEIZA Type : HW - S - 02 / K with Weishaupt burner, fired by gas MACHINE IS REFURBISHED , PROFESSIONALLY MARKED, DISMANTLED, STORED ON MILL-FLOOR - DETAILED VIDEO AVAILABLE For more information, technical details, photos, or video , please get in touch. Shipping possible immediately.

Condition: excellent (used), Year of construction: 2008, Krauss Maffei Injection Moulding Machine KM 300-1000 CX Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk drive station Clamping system: fully hydraulic Plasticising unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, bore: 3 mm Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight (max. mould open width): 1150 mm Ejector stroke: 200 mm Ejector force (forward/backward): 58 / 28 kN Injection unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection flow rate: 334 cm³/s Iodpfxow U Rcdj Acastk Screw speed (standard): 370 rpm Plasticising rate (at standard screw speed): 54.3 g/s Electro-hydraulic equipment Pump motor power: 45 kW Heater capacity: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke per Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold Itsdpfx Acewugczsajk 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: used, mileage: 4,16,000 km, power: 330 kW (448.67 HP), first registration: 09/2017, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 08/2026, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, parking heater, Mercedes Benz 3245 K / Arocs / 8x4 / Müller three-way tipper / Bordmatic / German vehicle / 1 owner / original paint etc. Audio system: CD radio comfort (Bluetooth), roof steps with handrail, exhaust outlet to the right outside, CB radio, compressed air connection in cab, air horn, cab with steel suspension, comfort, suspension: rear axle 2 x 13.0 t leaf springs, 12-speed transmission - type: G 230-12, rear lights for construction site use, rear axle crown wheel 233, info display 10.4 cm with additional indicator, interior filter for construction vehicles, fuel tank: 290 liters, aluminum, left side, front air intake, reinforced engine brake, programmable special module, reverse warning (audible signal outside), fleet management system interface, circuit breaker, seats in cab: driver's seat comfort air suspension, external sun visor, external storage hatch left, additional 24V socket in passenger footwell, paver package, cab door extension, rear underrun protection foldable, pre-installation for coolbox/fridge, straight front axle, increased ground clearance, additional thermal insulation, auxiliary heater (water). Iedpfxeyty Nqe Acaetk Emission standard EURO 6, ABS switchable, axle configuration: 8x4/4, front axle load 7.5 t, trailer coupling: Ringfeder, Arocs, electric adjustable & heated exterior mirrors, 170 Ah battery, batteries arranged vertically, rear axle differential lock, steel air tanks, low air pressure unit, cab width 2.30 m, movable cab access, hydraulic cab tilt, cab: M ClassicSpace, cab floor with 170 mm engine tunnel, suspension: leaf/leaf, front axle suspension 7.5 t, 3-leaf, electric windows, tinted windscreen, alternator 100 A, AdBlue tank: 25 liters, interior filter: pollen filter, body: tipper, comfort central locking system, non-variable power steering pump, two-stage air compressor, heated air dryer, engine 12.8 l - 330 kW R6 diesel (OM 471), engine compartment encapsulation, PTO MB 131-2c, ramp mirror, residual heat utilization, cab rear window, disc brakes with full protection, disc brakes front and rear, Servotwin power steering, seat cover/upholstery: fabric, seats in cab: multifunction passenger seat, rear axle stabilizer, front axle stabilizer, tachograph / EC control unit, fixed rear underrun protection, pre-installation for toll recorder, regulated water pump, gross vehicle weight 32.00 t, gearbox oil cooler.

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system Itjdpfx Acjv Iflpsaok 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher

Condition: excellent (used), Year of construction: 2004, Krauss Maffei Injection Moulding Machine KM 350-2700 C2+ Year of manufacture: 2004 System: Fully hydraulic Control: MC4, color monitor, integrated control panel, built-in disk drive 2. Plasticizing Unit Complete plasticizing unit for thermoplastics Version with abrasion protection Screw diameter: 80 mm Non-return valve Open nozzle Iodpfx Ajx Elukecaotk TECHNICAL DATA Clamping Unit Clamping force: 3500 kN Mold opening force: 220 kN Moving platen force: Opening: 105 kN Closing: 95 kN Platen dimensions (h × v): 1060 × 1095 mm Tie bar clearance (h × v): 710 × 710 mm Mold opening stroke: 920 mm Mold height: 380 mm Daylight: 1300 mm Ejector stroke: 250 mm Ejector force: 95 / 48 kN Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Injection volume: 1433 cm³ Shot weight for PS: 1304 g Screw speed (standard/option): 218 / 284 rpm Injection rate: 1508 cm³/s Standard throughput: 108 g/s Increased throughput: 141 g/s Electro-hydraulic Equipment Pump motor power: 75 kW Installed heater power: 36 kW Number of barrel heating zones: 7 Dry cycle time according to Euromap: 1550 1/h Oil tank capacity: 720 l Dimensions and Weight Net weight (with control cabinet): 16.7 t Machine dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total length: 16,000 mm, The centerpiece is a KITZINGER contino 400/2 KLT continuous container washing system, commissioned in 2019, complete with an associated reverse osmosis system. In addition, there is a PERKUTE Clean-O-Mat RC 122 top-loading cleaning system, three modern forklifts, and packaging and securing technology. All systems are ready for operation and will be delivered ex-works from Kerpen. CLEARANCE SALE — COMPLETE PACKAGE OR INDIVIDUAL SYSTEMS Acquisition possible as a complete package or in individual lots. Lease of the KITZINGER system fully paid off — direct transfer of ownership. High-quality brand components (LENZE, EDUR, ELEKTROR, SIEMENS) — attractive resale value. Iedpfx Acszazk Noaotk Ex-works (EXW) — dismantling and transport to be organized by the buyer. Complete technical documentation and maintenance history are available. System I — KITZINGER contino 400/2 KLT container washing system Industrial continuous container washing system designed for service providers, with three active washing zones, rinsing, and a heated drying section. The entire machine, which is 16.2 m long, features a high-quality stainless steel construction with double-walled sound and thermal insulation. Manufacturer / Type: KITZINGER Maschinenbau GmbH · contino 400/2 KLT Year of manufacture / Status: 2016 · ready for operation Machine length: 16,200 mm · straight line, zones arranged one behind the other Tunnel dimensions: Width 410 mm × Height 410 mm · passage width 160–410 mm Hourly output: 200–300 containers (60/40) and 200–300 lids Connection: 400 V / 50 Hz / 140 kW (2 control cabinets) Sound emission: ≤ 85 dB(A) in accordance with BGN specifications Premium components (brand-specific — attractive for resale) ▸ LENZE drive system and frequency converters for all zones ▸ EDUR stainless steel centrifugal pumps — Zone 1: 4 kW · Zone 2: 5.5 kW · Rinsing zone: 4 kW ▸ ELEKTROR fan motors — BS2: 2 × 5 kW · BS3H: 3 × 5 kW with 15 kW additional heating ▸ SIEMENS control cabinet components in both control cabinets ▸ POLO band skimmers in washing zone 1 and washing zone 2 Three washing zones plus rinsing and drying section Infeed zone 2,000 mm: Stainless steel belts with cams · adjustable side guides · vapor hood Washing zone 1 (2,700 mm): External filter tank 1,000 l · heater 20 kW · 55 °C · 1,500 l/min 1.5 bar Washing zone 2 (2,700 mm): External filter tank 800 l · heater 30 kW · 60 °C · 1,500 l/min 2 bar Rinsing zone 3 (1,800 mm): External filter tank 400 l · heater 40 kW · 65 °C · fresh water cascade Blow-off BS2 (1,800 mm): 2 × ELEKTROR 5 kW · adjustable stainless steel air knives Blow-off BS3H (2,700 mm): 3 × ELEKTROR 5 kW · electric additional heating 15 kW Neutral drain zone: 500 mm with suction port Special features: Completely double-walled insulated · nozzle arms can be removed without tools System II — Filter systems / Reverse osmosis Reverse osmosis water treatment system, which significantly reduces the fresh water volume and feeds it into the closed circuit of the three washing zones. Manufacturer / Type: TopWater 401/1000 — Reverse osmosis system Year of manufacture / Status: 2022 · ready for operation Function: Water treatment, reduction of fresh water consumption In addition, a PERKUTE Clean-O-Mat RC 122 top-loading cleaning system in an SPF cart version is available for the intensive cleaning of smaller and heavily soiled parts. Manufacturer / Type: PERKUTE · RC 122 (Clean-O-Mat SPF cart) Machine no. / Year of manufacture: S 1993 · 2008 Connection: 400 V / 50 Hz · 2

Condition: good (used), Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter ultrafiltration system for compressed air compressor condensate Oil/water separator for compressed air condensate. ● Treatment plant for separating compressed air condensate and condensates with difficult separation properties (e.g. stable emulsions) by means of cross-flow filtration ● Physical separation principle guarantees residual oil content of < 5 mg/l in water Intelligent control concept with programmable control for safe analog operation, incl. plain text display by means of text display, Fault monitoring via alarm messages with potential-free contacts and optional external network connection Optimized cleaning by comparison of input/output extends cleaning intervals and saves operating costs ● Thermally and chemically highly resistant ceramic membrane with long service life ● Antifreeze protection with integrated heating ● High-quality, corrosion-resistant materials for vessels, piping, pumps, seals, and valves Manufacturer: Donaldson Ultrafilter System type: ultraaqua autoclean 0016 AC Electrical data: 3 x 380 V, 50 Hz, 2.6 kW Compressed air: pmin: 5,5 bar, pmax: 8,5 bar, Pneurop 4 Water: pmax: 5 bar Membrane: pHmin: 1, pHmax: 11, tmin: 5°C, tmax: 70°C Financing through our bank is also possible. komplett-konzept.leasingo.de Itsdpfx Aeidx Uiscajk You can find additional filtration systems in other sizes—new and used—in our shop! International shipping costs upon request!

Condition: used, mileage: 23,674 km, power: 85 kW (115.57 HP), first registration: 05/1999, overall weight: 3,500 kg, fuel type: diesel, color: beige, gearing type: mechanical, emission class: euro2, loading space width: 1,860 mm, loading space length: 3,160 mm, loading space height: 1,920 mm, Year of construction: 1999, total length: 5,550 mm, total width: 250 mm, total height: 2,950 mm, number of seats: 3, Equipment: ABS, parking heater, Very rare and well-preserved MB Vario 512D from the ambulance service (disaster relief), with only 23,674 km on the odometer. Body style: short wheelbase and high roof – making it very maneuverable and suitable for a 3.5-ton weight class; technically approved for 4.8 tons. An ideal base for a motorhome. ABS, power steering, rear doors with a 270° opening angle, sliding door with sliding window, partition, double bench seat on the right, radio. Auxiliary heater – burner chamber new in 2022 – all-season tires from DOT 2022. Isdpozr Aynofx Acaotk This Vario was a depot vehicle from the German Red Cross in Schleswig-Holstein and was always stored in a heated hall. There is absolutely no backlog of repairs – the vehicle was constantly kept in operational condition. The body is in good condition with only minor, localized corrosion – a new MOT (technical inspection) would be no problem and is included in the price. We have just carried out a fresh inspection, including an oil and brake fluid change, and all glow plugs have also been replaced. For an additional charge of €650, we can carry out a technical modification to register it as a motorhome. In this context, the Vario will also receive a 220V external power connection. The Vario drives well, and the gears shift effortlessly – a beautiful vehicle. +++ Subject to errors, changes, and prior sale.