Used Turbo Balancing Machine for sale (66,279)

Condition: used, Thread rolling machine UPWS 25. Lodpfx Aszd Rf Nebyjhl

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Lodpjt Tqy Eefx Abyehl Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, Young, like-new demonstration machine: High-precision surface grinding machine, "Optimal" series, available at a special net price. Grinding area: 500 x 250 mm Features: ● Surface grinding machine with automatic vertical feed ● Grinding sequence: roughing – finishing – spark-out ● Siemens S700 touchscreen panel and electronic handwheel for Y-axis ● Digital display for vertical axis Y and cross axis Z ● Table cover and splash guards in stainless steel design ● Electrical cabinet fitted predominantly with Siemens components ● Includes manual dressing device, electro-magnetic chuck, and coolant filtration system Main technical data: Grinding length mm 500 Grinding width mm 250 Distance table surface to spindle center mm 450 Table drive Hydraulic Table load kg 180 Longitudinal movement X Table speed, steplessly adjustable m/min 7 – 23 Max. longitudinal travel mm 560 Cross movement Z Max. travel speed mm/min 990 Max. cross travel mm 275 Vertical movement Y Max. travel speed mm/min 460 Grinding spindle / Grinding wheel Spindle power kW 2.2 Wheel dimensions mm 200x20x31.75 Spindle speed (speed control optional) min⁻¹ 2850 Dimensions Machine weight (net) kg 1800 Machine dimensions (inc. reciprocation) Width mm 2300 Depth mm 1650 Height mm 1680 Power connection kW 3.7 All model series include standard accessories: ● 1 standard grinding wheel ● 1 wheel flange ● 1 dressing block with diamond ● 1 balancing arbor ● 1 balancing stand ● 1 machine lamp ● 1 set of machine tools ● 1 set of documentation with spare part list ● Machine in CE-conform (metric version) Precision and surface quality at optimal price. Fully equipped for universal use in a wide range of industrial and application areas. Machine comes with a 12-month parts warranty. By the way, aside from affordable new and certified used machines, we offer even more: • On-site consultation and solution finding • Organization of machine transport to your facility • Installation, commissioning, and turnkey handover • Spare parts supply • Control training for Siemens, Heidenhain, and Fanuc • Trained service staff available in your area and more • 24/7 telephone support • Tax-optimized trade-in of your old machine Lhedeyak Dlopfx Abysl • Attractive financing options, even without down payment

Condition: new, Year of construction: 2017, functionality: fully functional, operating hours: 25 h, input voltage: 380 V, type of input current: three-phase, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, overall weight: 2,500 kg, saw band length: 520 mm, saw band width: 580 mm, New machine. Ledpfx Aounia Hjbyshl

Condition: used, BROACHING MACHINE Lhsdjt Hr Dfepfx Abysl

Year of construction: 2011, condition: good (used), Turbo D253P depositor 2011, Stainless, height adjustable frame, three pistons, with 12 mini shot depositing head with rotary cut off valve, height adjustable frame, mobile Lhedpfx Abor E Dllsysl

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Vacuum fryer used for vegetable chips. In very good condition. Located in The Netherlands. Ljdpfxjxg Tfqs Abyjhl

Condition: excellent (used), KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 600 U YEAR OF MANUFACTURE: 2003 PARTIAL OVERHAUL: 2026 (Technical data see attached documents) Center height: 175 mm (without height adjustment) Grinding length: 600 mm Equipment: - Standard accessories - Internal grinding device for D: 80 mm max. incl. coolant supply through the workpiece spindle - Grinding wheel equipment left for D: 400 x 50 x 127 mm (standard) - Grinding wheel equipment right for D: 300 x 40 x 127 - Grinding wheel flange for wheels D: 400 x 50 x 127 mm (left) and D: 300 x 40 x 127 (right), balancing weights outside (3 pieces left, 2 pieces right) - Variable spindle drive with Danfoss frequency converter - Balancing device for dynamic balancing, type ELASO MANOBALANCE 750/EB 2000 - RENAUD internal grinding spindle type REN 828 (grease-lubricated with compressed air lock) - Various internal grinding mandrels for REN 828 – 1235, 1645, 2060, 2575 (4 pieces) - Various chucks HJNZ 28 for HJN 828 with 2 collets D: 3 mm and D: 6 mm - Tailstock standard MK 5 with adapter flange DIN 55027 size 5” Lhedpfx Abezhma Dsyol Bore D: 38.2 mm (standard) - Sine bar on the tailstock - Tailstock with manual retraction for quill travel - Micrometer adjustment on the tailstock - Pneumatic relief of the tailstock - FORKARDT planetary three-jaw chuck D: 200 mm - REISHAUER wedge-bar three-jaw chuck D: 160 mm - Permanent magnet chuck D: 200 mm - Collet chuck for Schaublin B32 - Set of 59 collets Schaublin B32, D: 1.0 – 30.0 mm, graduation 0.5 mm - Set of 8 workpiece supports incl. holder - Three-jaw steady rest, 175 mm, foldable, D: 3-120 mm - Swiveling dressing tool for dressing during external, surface or internal grinding - Side and angled dressing tool for side and angled dressing of the grinding wheels - Dial indicator stop for table swiveling with dial indicator 1/100 mm - Dial indicator stop for table longitudinal movement with dial indicator 1/100 mm - Dressing stop for internal grinding - HEIDENHAIN Digital length measuring system for the X and Z axes - STREULI paper band filter SPB 3, 90 l/min at 0.26 bar, tank volume 240 l - WALDMANN machine lamp - Set of vibration-damping pads - Three-color paint finish (light gray RAL 7035/blue RAL 5012/dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - CE conformity - Documentation Condition: very good, machine geometrically and mechanically overhauled (see geometry report)

Condition: used, Year of construction: 1995, Used Machine Year of Manufacture: 1995 Features and Technical Specifications: Cost-Effective: - Turbo System: 25% higher system performance thanks to state-of-the-art application technology—while requiring the same amount of floor space! - Shorter cycle times thanks to optimized automatic programming for fast UV systems - Up to 70% cost savings compared to casting and injection molding through the use of solvent-free systems and one-person operation Flexible: - Cost-effective one-person operation with a return cycle function, or optionally in a continuous-flow process for two-person operation - The system is expandable; additional rolling, smoothing, or sanding units can be added Ergonomic: - Easy operation thanks to ergonomic controls Service-friendly: - Thanks to a cleaning circuit and quick-change system Reliable process: - Top-quality surfaces, precisely reproducible Includes: - Roller conveyor, 2000 mm long - ELX 1400 roller conveyor - Bar conveyor, 3000 mm long - UV drying channel with 1 lamp (60/80/120 W) Ledpfxjzlbq Eo Abyshl - Working height: 850–950 mm - Rubber-coated application roller: D=238 mm - Chrome-plated metering roller: D=174 mm - Clearance height: 3–120 mm - UV lamp module: 80/120-watt mercury - Power consumption: approx. 21 kW Dimensions: 1300 x 3080 mm

Condition: used, axle configuration: 3 axles, first registration: 09/2015, color: other, Year of construction: 2015, Empty weight: 4.950 kg Axle 1: left 5 mm right 5 mm Axle 2: left 10 mm right 10 mm Axle 3: left 5 mm right 5 mm Lodpfx Aszkldasbyjhl We have the possibility to stack trailers!

Condition: used, grinding diameter 250 mm grinding length 1000 mm Lsdpfxed Ih Ego Abyjhl centre height 125 mm grinding wheel diameter 500 mm grinding wheel width 80 (100) mm bore 203,2 mm MK5 work piece spindle speed 20-400 U/min workpiece spindle swivable +/- 360 ° grinding head swivellable +/- 0 ° 0-9,99 mm/Ø 0-9,99 mm/Ø table swivelabel +/- 10 ° table speeds 0,02-6 m/min 130 kg max. workpiece weight -without tailstock 130 inkl. Spannung kg cross travel 270 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 5,5-7,5 kW weight of the machine ca. 2,7 t As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. delivery: completely overhauled including a new control Examples: Accessoies: - Marposs auto-sizing-attachement - Balancing for the wheel. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Type: Torsional drive Item No.: 1023835 Maximum drive torque: 20 Nm Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Force sensor: Type: Zwick / Roell Xforce HP Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + Ljdpfx Abezwvtxjyehl ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Installation distance: 20 to 500 mm + Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.

Condition: excellent (used), 1 x Quantative filling machine Depositor. Model D1WG. Lhedpfx Ajz Ak H Rjbysl Filling range 1000-5000

Condition: new, Year of construction: 2026, The 600x300 surface grinder (MYS 1224) is a compact yet highly precise machine designed for grinding small and medium-sized metal components. Its advanced construction and technologies ensure excellent machining quality and reliability in industrial environments. Key Advantages of the 600x300 Surface Grinder (MYS 1224) The 600x300 magnetic surface grinder (MYS 1224) is an ideal solution for industrial facilities that require precision machining while maintaining a compact machine footprint. Designed for professionals, it combines high accuracy, efficiency, and ease of operation, meeting the requirements of even the most demanding applications. Key benefits include: High machining precision: Grinding accuracy of 300:0.005 mm and a surface roughness of Ra 0.32 ensure an excellent finish of machined components. Lodpjkkcp Esfx Abyjhl Compact working area: The 600x300 mm table allows for machining small and medium-sized components, making the machine ideal for precision applications. Smooth hydraulic feed: The two-axis feed system, with a longitudinal feed speed of 3–20 m/min, ensures smooth and precise operation. Stability and durability: The robust 1,400 kg construction and hardened linear guideways minimize vibration, ensuring reliable performance during intensive machining operations. Easy maintenance: Centralized lubrication of the guideways reduces the need for manual maintenance and extends the service life of the machine. Ready for operation: The machine is fully prepared for immediate production, helping to streamline operational processes. Grinder Construction and Technology Robust Construction and Precision Components The 600x300 surface grinder (MYS 1224) features a robust 1,400 kg construction that ensures stability during machining. Hardened and ground linear guideways eliminate vibration, guaranteeing smooth table movement and a high-quality surface finish. The spindle, driven by a 2.2 kW motor, operates with a grinding wheel measuring 300x30x76.2 mm, enabling efficient machining of a wide range of materials. Advanced Hydraulic Feed System The machine is equipped with a two-axis hydraulic feed system, with a longitudinal table feed speed ranging from 3 to 20 m/min and a cross-feed speed of up to 600 mm/min. The precision cross-feed increment per vernier division is 0.01 mm. Technical Specifications Specification Value Table dimensions 600 x 300 mm Maximum table travel 630 x 320 mm Distance from table surface to spindle axis 520 mm Table T-slot 1 x 14 mm Longitudinal table speed 3–20 m/min Rapid vertical feed speed 360 mm/min Cross-feed per vernier scale division 0.01 mm Cross-feed per handwheel revolution 2 mm Incremental cross-feed 0–8 mm/min Cross-feed speed 600 mm/min Grinding wheel dimensions 300 x 30 x 76.2 mm Grinding wheel speed 2,850 rpm Manual vertical feed per vernier scale division 0.01 mm Grinding accuracy 300:0.005 mm Grinding surface roughness Ra 0.32 Manual vertical feed per revolution 2 mm Main motor power 2.2 kW Coolant pump motor power 40 W Dimensions 1960 x 1480 x 1850 mm Weight 1,400 kg Standard Equipment Magnetic table Grinding wheel Grinding wheel holder Wheel balancing device Cooling system Halogen lighting system Technical and operating documentation CE Declaration of Conformity

Condition: ready for operation (used), Year of construction: 2011, operating hours: 16,140 h, functionality: fully functional, machine/vehicle number: 111214, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain 530, overall weight: 7,800 kg, TECHNICAL DETAILS Travel range X-axis: 1,100 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Number of positions in tool changer: 30 Table dimensions: 1250 x 610 mm MACHINE DETAILS Control system: Heidenhain 530 Operating hours: 16,140 h Ledpfjz Apdzox Abyjhl Machine weight: approx. 7,800 kg

Condition: new, Year of construction: 2024, neu 2024 5549 prompt, Zwischenverkauf v Taiwan 63870 € 1207.14 € 1 1 610 mm 610 mm 600 x 300 mm 300 x 600 mm 650 mm Lhodpowiqymofx Abysl 700 mm 5 - 25 m/min 0 - 2,250 mm/min 3 - 32 (0,001) mm 320 mm 5,5 kW kW 0.74 kW 1 kW 1 kW 2950 mm 1490 mm 2080 mm 2200 kg 355 x 50 x 127 mm 1.450 U/min 0,001 mm 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator automatic dresser over the wheel, with compensation grinding wheel grinding wheel flange grinding wheel balancing stand balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH OPTIONAL EQUIPMENT: additional grinding wheel flange € 200,--

Year of construction: 2010, condition: like new (used), functionality: unexamined, machine/vehicle number: TUBE-MATIC-1200-CNC-3376, Equipment: 3rd hydraulic function, Unused SAFOP,ITALY Make Heavy Duty Bevelling Machine Upto 1200 MM ,CNC,Siemens Control,available for Sale IN Southern PArt Of INDIA fore an very Attractive Price. Lhjdpfxozrkwns Abyol

Year of construction: 2003, condition: good (used), functionality: fully functional, X-TEK RTR160UF: X-TEK Systems Ltd., England Model: RTR160UF Type: Ultra Focus X-Ray System Max. X-ray voltage: 160 kV Max. power: 60 W Focus size: 5 (Ultra Focus) Manipulator: 50 kg, 5 axes Power supply: 230 VAC, 50/60 Hz Ledpfx Abszl Scroyjhl Serial number: RTR/124 Model: RTR160UF X-ray source: 160 kV, 60 W, 5 m Ultra Focus Manipulator: 50 kg, 5-axis Serial No.: RTR/124 Supply: 230 VAC, 50/60 Hz Specified cabinet leakage: < 1.0 Sv/hr at any point on the cabinet surface under the stated test conditions. This is an industrial cabinet X-ray inspection system, designed for high-resolution non-destructive testing (NDT) of components, electronics, castings, solder joints, and similar items. The 5 m ultra-focus source is intended for very high-resolution imaging.

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, Available from stock Max. Grinding width: 225 mm (incl. wheel) Max. Grinding length: 450 mm Max. Distance table to spindle center: 450 mm Max. Longitudinal movement of the table (hydr.): 500 mm Max. Max. longitudinal movement of the table (man.): 530 mm Automatic vertical infeed: 0.002 - 0.004 mm Automatic transversal infeed: 0.4 - 6 mm Max. Clamping surface of the table: 450 x 200 mm Max. Clamping surface of magnetic clamping plate: 450 x 200 mm Ledpfxoirwnvs Abyohl Grinding wheel D x B x d: 203 x 12.7 x 31.75 mm Rapid traverse: 330 mm/min Grinding spindle speed: 2850 rpm grinding spindle drive: 1.5 kW hydraulic motor: 0.75 kW weight: 1300 kg dimensions W x D x H: 2100 x 1650 x 1900 mm Balancing mandrel Manual extractor with diamond Automatic vertical feed Electro-magnetic clamping plate Control panel on swivel arm Grinding wheel spindle on 4 high precision angular contact ball bearings Hardened guideways in all 3 axes with needle bearings Grinding wheel Grinding wheel flange Grinding wheel balancing scale Coolant system with aut. paper filter and magnetic separator Operating instructions in ENGLISH Machine and equipment according to CE regulations

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) Lhsdpfxjyzh Ulo Abyol - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for robot 5 - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Condition: used, New 2013 Table size 1474 x 356 mm X axis 1016 mm Y Axis 596 mm Z Axis 584 mm (Head Traverse) Spindle Speeds 40 – 5000 rpm & 40ISO Lhedpfxoyhdi Rs Abyel 7.5 hp Spindle Drive. Max Table load 850 kg

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: A/18031, SCHULER - MSP2-800- 4,5x1,8-400 Kapasite: 800 ton Lhodpfxszxqz Ts Abyel Hava Tüketimi: 30 m³/saat Güç: 296 kW Üst Tabla Ebatları: 4500 mm x 1700 mm Alt Tabla Ebatları: 4500 mm x 1800 mm Pres Yükseklik: 7,5 m Pres En: 6,50 m Pres Genişlik: 4,50 m Dakikadaki Vuruş Sayısı(maksimum): 70 spm Çalışma Reglajı: 300 Kurs Değeri: 80-360 Used machine

Year of construction: 2021, condition: good (used), 1 x Box Taping Machine Lsdpfx Ajy T Nbdjbyjhl Model: AS523S Year: 2021

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Ledpfx Aszti Tkjbyohl Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. This equipment has very few operating hours.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: Two chucks Groove function: Standard Power range: 3KW, 6KW Round tube processing range: 10mm~160mm Square tube processing range: 10mm~160mm Chuck maximum speed: 130r/min Machine weight: 3T Power specification: 380VAC, 50Hz Optional loading rack: G16pro-automatic loading, G16pro-semi-automatic loading Optional unloading rack: servo unloading rack, cylinder unloading rack Standard: System 3000DE-DH, including nesting, supports servo, dustproof (Y axis), dustproof (X axis), dustproof (Z axis), rear card hollow dust removal, short tail material Lhsdpfx Aowwz Dljbysl Optional: safety fence (light curtain), radiation-proof glass