Used Urban End Mill for sale (15,893)

Condition: used, Year of construction: 2007, x-travel 600 mm y-travel 450 mm z-travel 450 mm Hjdpfx Abozxh U Detst Control Heidenhain iTNC 530 feed power 7.000 N rapid traverse 45 m/min Acceleration 6 m/s² number of tool places 30 Pos. Max. magazine capacity 120 kg weight of tools max. 6 kg diameter of tools max. 80 mm tool length - max. 250 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2012, x-travel 670 mm y-travel 820 mm z-travel 600 mm control Heidenhain iTNC 530 turning speed range - main spindle 18000 min/-1 drive capacity - main spindle 25-35 kW max. torque 87-130 Nm Hsdjzxh Uwopfx Abtst table surface area 800 x 800 mm T-slots 9x90 rotating range 360 ° swival range +/- 120 Grad max. table load 1200 kg tool taper HSK 63 A number of tool places 96 Pos. max. tool diameter 75 mm max. tool length 300 mm max. tool weight 7 kg change-time tool to tool 3 sec rapid traverse ( x / y / z ) 60 m/min total power requirement 85 kW weight of the machine ca. 19 t dimensions of the machine ca. 4,15 x 5 x 3,5 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features: - New spindle - Refurbished table Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2017, turning diameter 550 mm turning length 978 mm control FANUC F0-iT + MG i x-axis 352 mm z-axis 1.105 mm spindle tunring speed 2.000 U/min number of tool places 12 Pos. Number of working hours ca. 8.577 h machine weight ab. 10.100 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Hinged-belt chip conveyor (right-hand side) - Built-in programmable tailstock - Internal quill bearing for fixed MT5 center - Automatic tool-setting arm (hydraulically swiveling) Hsdpfx Ajzxh Uqjbtst Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data/specifications, and prior sale.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning length: 196 mm, turning diameter over cross slide: 130 mm, spindle speed (min.): 6,000 rpm, bar diameter (max.): 36 mm, overall weight: 1,900 kg, Equipment: documentation/manual, Yamazaki Mazak QT-6T CNC Turning Center – Excellent Condition We offer for sale a well-maintained Yamazaki Mazak QT-6T CNC Turning Center, manufactured in Japan and kept in excellent mechanical and operational condition. The machine is currently under power, in production, and available for inspection and testing upon appointment. Machine Information - Manufacturer: Yamazaki Mazak - Model: Quick Turn QT-6T - Year of Manufacture: 1999 - Serial Number: 39178 - Country of Origin: Japan - CNC Control: Mazatrol - Configuration: 2-Axis CNC Turning Center (X / Z) - Machine Weight: Approx. 1,900 kg Main Features - 6" Chuck - Collet Chuck - Complete Set of Collets Included - Bar Capacity up to 36 mm - 8-Station Turret - Tool Eye (Automatic Tool Measurement System) - Automatic Parts Catcher - Coolant System - Fully Operational Included Equipment - Fedek Bar Feeder - Bar Feeder Length: 1.5 m - Pneumatic Bar Pushing System - 6" Chuck - Collet Chuck - Complete Set of Collets - Full Set of Tool Holders - Original Manuals and Documentation - Various Accessories Additional Equipment Included The machine is supplied with the complete set of spindle protection plastic tubes (bar guide tubes), allowing safe operation with bar stock and minimizing vibration, noise, and bar whipping during spindle rotation. This contributes significantly to machining stability, surface finish quality, and spindle protection when running long bars. Technical Specifications - Maximum Turning Diameter: Approx. 130 mm - Maximum Turning Length: Approx. 196 mm - Spindle Bore: Approx. 45 mm - Maximum Spindle Speed: Up to 7,000 rpm - Bar Capacity: 32–36 mm - X-Axis Travel: Approx. 80 mm - Z-Axis Travel: Approx. 200 mm Hodpfx Ajzal Raebtjt - Rapid Traverse X/Z: Up to 30 m/min Condition ✔ Excellent mechanical condition ✔ Regularly maintained ✔ Machine under power ✔ Ready for immediate production ✔ Inspection and test run possible ✔ All manuals and documentation available Additional Information This machine is offered as a complete production package and is ideal for precision machining of bar stock, small and medium batch production, and high-accuracy turning applications. The machine comes with extensive tooling, collets, holders, automatic tool setting, automatic parts catcher, bar feeder, and spindle guide tube system, allowing immediate integration into production with minimal additional investment. Loading assistance is available. Videos of the machine running can be provided upon request.

Condition: refurbished (used), functionality: fully functional, Internal article number: 26083 Hodpfxezxg H Ej Abtst Universal milling machine Deckel FP3 aktiv Refurbished by FPS + Machine lamp / protective cover The machine comes from a training workshop and is in very good condition.

Condition: good (used), Year of construction: 2021, functionality: fully functional, Internal article number: 26082 Universal milling machine Deckel FP4M Overhauled by FPS in 2021 + Hydraulic machine vice, Röhm 135 + Machine lamp / protective cover + Operating manual Hedpfxszxgy Ss Abtst Dimensions (L x W x H): 140 x 210 x 200 cm Weight: approx. 1500 kg The machine comes from a training workshop and is in very good condition.

Year of construction: 1997, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH AUTOMATIC A/B-AXIS HEAD LONGITUDINAL TRAVEL: 4000 mm TRANSVERSAL TRAVEL: 1200 mm VERTICAL TRAVEL: 2000 mm RAPID FEEDS L-T-V: 15 m/min TABLE SIZE: 5000 x 2000 mm SPINDLE: 4000 rpm; 27 kW; 1200 Nm HEAD: A/B AXIS AUTOMATIC ; A 2,5°- B 2,5° ; ISO 50 ; 4000 rpm TOOL MAGAZINE: CHAIN-TYPE ; 30 POS Hjdpfxoh Stzke Abtst CONTROL UNIT: SELCA S3045 WEIGHT: 25500 Kg ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL NOTE: EXTENSION 400mm -ISO50 -6.500rpm; AUTOMATIC HEAD EXCHANGE; PERIMETER GUARDING

Year of construction: 2004, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH ROTARY AND SHIFTING TABLE LONGITUDINAL TRAVEL: 4000 mm TRANSVERSAL TRAVEL: 1250 mm VERTICAL TRAVEL: 2000 mm RAPID FEEDS L-T-V: 20 m/min TRANSVERSAL TRAVEL OF THE TABLE: 2000 mm PALLET: 2000 x 2500 mm; 1200 rpm MAX ADMITTED LOAD: 28000 Kg HEAD: A/B AXIS AUTOMATIC ; ISO50 DIN ; 15-4000 rpm; 30 kW; 650 Nm TOOL MAGAZINE: CHAIN-TYPE ; 41 POS CONTROL UNIT: FIDIA C20 XPOWER HIGH PRESSURE COOLANT: 12 Bar ACCESSORIES: PORTABLE HANDWHEEL ; Hodpewlwhcofx Abtet SWARF CONVEYOR ; LASER TOOL SETTER

Year of construction: 2018, condition: ready for operation (used), - USED - 5-AXIS BRIDGE-TYPE CNC MILLING MACHINE LONGITUDINAL TRAVEL: 2500 mm TRANSVERSAL TRAVEL: 3500 mm VERTICAL TRAVEL: 1300 mm RAPID FEEDS L-T-V: 40 m/min Hedpfswla Hnsx Abtst TABLE SIZE: 3500 x 2500 mm HEAD: A/B AXIS AUTOMATIC ; A-axis ±185° - B-axis ±270° ; HSK A100 ; 12000 rpm TOOL MAGAZINE: CHAIN-TYPE ; 64 POS CONTROL UNIT: HEIDENHAIN TNC640 WEIGHT: 51370 Kg ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PAPER FILTER ; LASER TOOL SETTER ; TOUCH PROBE ; PORTABLE HANDWHEEL

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 3649.63 € 15 mm B 16 214 mm 40 - 4000 U/min 0,54 kW M10 355 mm 485 mm 1027 mm 70 kg 125 - 490 mm Hsdpfxjzv Ey Se Abtjt 300 x 250 mm 82 mm THE HEIGHT-ADJUSTABLE HEAD MAKES IT IDEAL FOR SHORTER USERS, E.G., FOR TRAINING WORKSHOPS AND SCHOOLS PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 13 / 15 (in E335/ST60) Manal feed Tapping device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front Head height adjustment via toothed rack LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation Art. - No. 212.650 with B16 spindle Art. - No. 212.655 with MK 2 spindle (price on request) OPTIONS: Machine cabinet Drill package

Condition: used, Year of construction: 2007, Technical details: standard turning dia.: 42 / 140 turning length: 170 mm control: Mitsubishi max. turning diameter: 140 mm bar material dia.: 42 mm turning speed range - spindle: 80-8000 1/min spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 60-6000 1/min spindle nose: JIS A2-6 bar material dia. max: 42 mm collet chuck: 173E C-Axis: 0,001 ° Hedpfszxh R Eox Abtet Number of Turrets: 2 . Number of tool stations: 12 x 2=24 pos power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,4 x 1,6 x 2,2 m Accerories Chip conveyor Coolantsystem The Boley BE 42 2 has 2 spindles und 2 turrets with 12 toolstations VDI 20 each. It can work simultaneus with 7 Achsen. The machine has ca. 22.000 run hrs. The coolant system has a cooling unit 15 collets 173E come with the machine. A bar feeder interface is installed. *

Condition: refurbished (used), functionality: fully functional, Equipment: CE marking, Fully refurbished, heavy-duty bridge milling machine. Hsdszxi Niepfx Abtst GMM, model EURA 35. We offer machine installation services, including training for your operator.

Condition: good (used), Year of construction: 2008, MAZAK HCN 5000 – Year 2008 * Horizontal CNC Machining Center * Year: 2008 * CNC Control: MAZATROL * Pallet size: 500 × 500 mm * 4-axis machining * Automatic Pallet Changer (APC) * Automatic Tool Changer (ATC) * High-performance spindle * Powerful and robust machine design * Suitable for heavy-duty machining Hjdpfozxbd Ejx Abtet * High precision and productivity * Ideal for single parts and series production * Suitable for steel, stainless steel and non-ferrous materials

Condition: used, Year of construction: 2007, operating hours: 39,359 h, functionality: fully functional, machine/vehicle number: 0-201-04-0605, Description of the Main Equipment: Clamping table with matrix aluminium construction Hsdpsyucyzofx Abtot Vacuum system prepared for 1000 m³/h nesting technology Power Control control panel with PC85 Main spindle 15 kW with vibration sensor C-axis with aggregate interface Interface for FLEX-5 aggregate Plate-type tool changer with 10 positions Drilling unit: 13 spindles – 9 vertical and 2+2 horizontal spindles Software package for office computer WoodWOP Tools software Maximum positioning speed: 80 m/min in X and Y directions (vector speed: X/Y = 113 m/min) / 30 m/min in Z direction

Condition: refurbished (used), functionality: fully functional, Equipment: CE marking, Used, fully overhauled bridge milling machine, restored to like-new condition with all parts replaced. The Axia from Gmm has always been synonymous with reliability, robustness, precision, and ease of use. It can accommodate a disc up to 1200mm. Hedpfx Abozxg Hretst The complete control unit (cabinet with display + PLC + module – see photo) has been sent to the manufacturer for inspection, revision, and data/program updates. The table is motorized and can rotate.

Year of construction: 2020, condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology, agglomerator -Condition: The machine was a demonstration unit, equipped without a control system. -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Ejection: Height adjustable Quantity: 1 piece available -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm -Weight: 1900 kg Hodpezbk Iyjfx Abtet

Condition: used, Year of construction: 1987, Technical details: spindle diameter: 110 mm x-travel: 1985 mm y-travel: Spindelstock vert. 1270 mm Hjdpju Utwbefx Abtet z-travel: Tisch längs: 1260 m. Setzstock/1490 m. Setzstock mm table adjustment: nein ° B-axis (table): 360 W-axis (spindle longitudinal): axial: 710 mm U-axis: Planschieber radial: 250 mm control for program: Heidenhain 320 tool taper: ISO 50 table-size: 1600 x 1400 mm table rotating: 360 ° table load: 6,3 t range drill spindle revolution per minute: 6,3 ... 1250 / 4 step U/min revolution per minute: Plansupport: 6,3 ... 315 / 2 step U/min feed steps: Tisch: 5...2500 und Spindelstock vert. 5...2500 mm/min total power requirement: ca. 90 kW weight of the machine ca.: 30 t Tailstock Facing slide 700 Electronic handwheel max. turning Ø for drilling: 630mm max. turning Ø for facing: 1250mm At the moment the Horizontal Boring and Milling Machine has an electrical fault in the control (unknown). Our offer/sale is as described and as is! *

Condition: used, Technical details: spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1600 mm Hodpfx Aju Idp Dsbtjt z-travel: 2000 mm control for program: TNC Heidenhain 360 B-axis (table): ja W-axis (spindle longitudinal): Planschieber mm tool taper: ISO 50 table-size: 1400 x 1250 mm machine dimensions LxWxH: 8,0 x 6,0 x 4,5 m weight of the machine ca.: 28 t with face slide 700mm , electronic hand control *

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm - C-axis - Main spindle speed: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Turret 2: 8 stations, 4 of which are powered - Driven tool speed: 4,000 rpm - Both turrets with internal cooling Hedpfx Ajzxhmasbtst - High-pressure unit - Chip conveyor - Bar feeder IRCO SiMag 65 - Max. bar length: 3,200 mm Dimensions LxWxH: - Machine: 3,400 x 1,700 x 1,800 mm - Bar feeder: 4,000 x 1,000 x 1,400 mm - Chip conveyor: 3,000 x 1,100 x 1,600 mm Total weight: approx. 6,000 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Hedpfx Abezw H Rujtet Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total length: 950 mm, total height: 930 mm, table width: 180 mm, input voltage: 400 V, total width: 560 mm, table length: 700 mm, stroke length: 52 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, Equipment: documentation/manual, ## DRILLING AND MILLING MACHINE MTP ZAY7025V - 700 x 180 mm Manufacturer: Metal Technics Polska Model: MTP ZAY7025V Year: 2026 Condition: New, fully functional Price: EUR 2,125 net EXW + VAT where applicable Location: Sokolow Podlaski, Poland ### DESCRIPTION The Metal Technics Polska MTP ZAY7025V is a compact and versatile drilling and milling machine designed for drilling, milling, tapping and general machining operations. With infinitely variable spindle speed, a tilting milling head and a large precision cross table, the machine is suitable for metalworking workshops, maintenance departments, tool rooms, educational facilities and small-scale production. The machine is available with 400 V three-phase or 230 V single-phase power supply. ### MAIN ADVANTAGES * Drilling, milling and tapping in one machine * Forward and reverse spindle rotation for thread cutting * Infinitely variable spindle speed: 50-3000 rpm * 2-speed gearbox for efficient power transmission * Milling head tiltable from -90° to +90° * Large cross table: 700 x 180 mm * Digital spindle speed display * Digital spindle feed display * High concentricity thanks to precision spindle bearings * Ergonomic control panel * Safety guard * EMC filter according to CE requirements * Compact and robust construction * Choice of 400 V three-phase or 230 V single-phase ### TECHNICAL DATA Hodpfxeytpl Us Abtjt * Drilling capacity in steel: 25 mm * Maximum face mill diameter: 80 mm * Maximum end mill diameter: 25 mm * Spindle taper: MT3 * Spindle travel: 52 mm * Spindle speed: 50-3000 rpm * Motor power: 1.0 kW * Table size: 700 x 180 mm * X-axis travel: 490 mm * Y-axis travel: 160 mm * T-slot size: 12 mm * Milling head inclination: -90° / +90° * Milling head height adjustment: 275 mm * Distance spindle to column: 170 mm * Spindle-to-table distance: 45-325 mm * Dimensions (L x W x H): 950 x 560 x 930 mm * Weight: 160 kg * Power supply: 400 V three-phase / 230 V single-phase ### STANDARD EQUIPMENT * B-16 drill chuck * Arbor * Digital spindle feed display * Digital spindle speed display * Forward/reverse spindle function * Safety guard * EMC filter * Service tools * Machine base / stand * Documentation and operating manual ### DELIVERY Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide your delivery address or postal code to receive a transport quotation. The MTP ZAY7025V is an efficient and affordable solution for customers requiring drilling, milling and tapping capabilities in one compact professional machine. Contact us for availability, transport quotation or information about other Metal Technics Polska machines.

Condition: new, Year of construction: 2025, Safo DNAA 160 Hodpfx Ajzxhatobtot Finished product diameter 40-160 mm New machine tool.

Condition: used, Year of construction: 2002, Used machine Year of manufacture: 2002 Condition: Well-maintained (from a public facility) Design: Table size: 1255 x 900 mm Table height: 900 mm Table opening: 305/225/160/105/72 mm Weight: 1150 kg Spindle speeds: 3000/4500/6000/9000 RPM with belt-driven quick-change system Indicators: electronic spindle speed display, digital (LED) for spindle height (absolute and relative), as well as for swivel angle; automatic display of the correction value for milling depth; double operating hour counter for total and batch run times Milling spindle: electrically swiveling +/- 45, 50° via button; electrically adjustable height with rapid and slow traverse; with steep taper SK 40; collet chuck, quick-change system incl. torque wrench; wear-free, electrically braked; electropneumatic locking via selector switch Spindle stroke: 150 mm at 5/6 kW and 7.5 kW, 125 mm at 7.5/9.5 kW Milling fence: aluminum milling fence, hard-coat coated with holder for groove plate or guide rails Handwheel adjustment according to mechanical digital counters; separate adjustable run-in basin; workpiece diameter max. 250 mm Extraction: twice 120 mm diameter Maintenance device: central lubrication via pump, lubrication of the milling spindle via grease quantity regulator Accessories: milling arbor 30 mm, wrench, torque wrench for collet chuck system, oil press, grease press, ball bearing for run-in ring 62 mm, groove plate, arc milling guard FRS 95 for milling operations on the run-in ring with extraction nozzle and feed strip Electrical design: lockable main switch, automatic star-delta starter, electrically wear-free brake, connection for extraction control, undervoltage protection; CEE three-phase connection for feed unit (= 5-pole socket) Emission values: noise levels according to prEN ISO 11202; workpiece diameter 125 mm, Z=2, n=6000 RPM Workplace emission: Idle noise (without extraction) 68.6 dB(A) Hjdozw Rvzjpfx Abtot Operating noise (with extraction) 84.6 dB(A) Work at the milling fence - feed side max. 0.34, removal side max. 0.28 With slot hood - feed side max. 0.21, removal side max. 0.20 Minimum air flow rate for both extraction nozzles: 24 m³/min at 1000 Pa Special equipment: Model T26, 5/6 kW (6.8 / 8.2 HP) design with CPS - Type Gamma V protective device; equipment with Centrex type protective device; swiveling control panel with control buttons and digital display for milling spindle swivel and spindle up/down with relative and absolute position display and automatic display of the correction value for the milling depth during swiveling; necessary if a feed unit is installed to the right of the milling fence. Milling fence with resettable mechanical digital counter for total adjustment Integral fence 650 and 500 mm long with filler bar Support for feed unit (can be swiveled away) with motorized height adjustment (for machines with control panel) Milling arbor SK 40, 30 mm diameter, clamping length 140 mm (200 mm tool diameter) Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2000, Used Machine Year of manufacture: 2000 Features and Technical Specifications: - For vertical edge processing with edge thicknesses up to 3 mm - With automatic milling feed - With base frame - Electrical connection: 230 V - Compressed air connection: min. 6 bar - Workpiece thickness: max. 45 mm Hodpfxozw N Euj Abtot - Tool: r = 2.5 or r = 3

Condition: new, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 9,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 62,000 kg, coolant supply: 36 bar, workpiece weight (max.): 62,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, LAGUN CM 8 Traveling Column Milling Machine The LAGUN CM 8 is a highly dynamic traveling column milling machine for the precise machining of large and complex workpieces. Ideal for single-piece production as well as series production with the highest requirements for accuracy, stability, and flexibility. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Lease purchase / financing possible ✔ High flexibility thanks to the traveling column concept ✔ 24 months warranty Technical features: Control: Hsdpom Tv D Ajfx Abtst ✔ Two HEIDENHAIN TNC 7 digital path controls – one on the front of the machine and one at the rear in the cabin ✔ Two HEIDENHAIN TFT 24" screens ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (IKZ) 36 bar Tool changer: 60-position chain magazine with double gripper Chip conveyor systems: 2x articulated belt conveyors Rotary table: Preparation for 4th axis Enclosure: Three-sided perimeter enclosure Accuracy: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Contact us – we will be happy to advise you and create an individual offer for you.