Used Veb Ilka Vao 250/401 for sale (11,121)

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Gedpfx Apsy D Rk Iswska Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 2,53,000 mm, load per truss pair (max.): 2,000 kg, load capacity per storage section: 2,000 kg, number of shelf rows: 10, shelf height: 7,500 mm, frame height: 7,500 mm, shelf length: 25,300 mm, support length: 2,700 mm, 10 rows of pallet racks (10 x M75112711-4) each 25.3 m long, 7.5 m high, 1.1 m deep, each with 9 bays, 2.7 m wide, each with 4 beam levels, shelf load 2000 kg. - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, and screws - 400 ground anchors (ZZBA1210) - 720 single crossbeams (T27114 - RAL2008) - 2 collision protection / impact protection (ZRS40901) - 4 flank protection (ZFL4090D) - 120 spacers / connectors for double rows (ZAbh20) - 10 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; Gsdpfx Apov Uqwdsweka except islands! Deliveries to EU countries are subject to individual agreement.

Condition: good (used), Year of construction: 1982, machine/vehicle number: 1501-2, Offer 26128 Technical Data: - Max. load capacity in horizontal position: 5000 kg - Faceplate diameter: 1150 mm Gjdjy Ec Emspfx Apweka - Faceplate motorized tilting: 0 - 130° - Rotary movement electronically steplessly adjustable - Right and left rotation - Welding current transmission: approx. 500 A - Drive: 400 V - Table height in horizontal position: approx. 1220 mm - Handheld remote control - Required space: approx. W 1350 x H 1220 x D 1900 mm - Weight: approx. 3500 kg - Adapter plate with clamping device for round material

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table load: 6,000 kg, spindle diameter: 110 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 1,120 rpm, total height: 4,300 mm, total length: 7,200 mm, total width: 4,600 mm, table length: 1,600 mm, table width: 1,400 mm, feed length W-axis: 800 mm, type of input current: AC, spindle stroke: 800 mm, overall weight: 26,000 kg, year of last overhaul: 2020, A Union Gera BFT 110/6 horizontal boring mill is for sale The machine was built around 1980 and was overhauled by us in 2009/2010 and has been in our care since then. The scope of the overhaul includes the following: - Electrical system almost completely renewed - New control cabinet incl. Siemens S7-200 PLC control system - New drive technology Siemens Simodrive 611, feed motors Siemens 1FK7 - Heidenhain TNC 124 line control + electronic handwheel - Heidenhain length measuring systems on X, Y and Z axes - Heidenhein angle measuring device in B-axis (rotary table) - Spindle drive three-phase asynchronous with DC brake electronics - Renewal / overhaul of all hydraulic components - New KGT in X and Y axes - Overhaul of the drive systems of all feed axes - All axles were rescraped - Lubrication systems of axes and headstock overhauled - New bearings and overhaul of the gear components of the headstock For further technical details see photos or on request. Equipment of the machine: - Heidenhain TNC 124 line control + electronic handwheel - Facing slide (U-axis) - Electric tool clamp SK 50 The sale is due to capacity reasons. The machine is fully functional and immediately available. It achieves production accuracies according to the manufacturer's protocol. Technical documentation is available. The machine is fully functional and, by prior arrangement, can be inspected under power. The offer is subject to our terms and conditions of business and delivery. Subject to errors and prior sale. As a warranty is excluded for the purchase of used machines, we recommend that our our customers to inspect the machine before making a purchase. As is customary with used machines, payment is made by bank transfer before delivery of the goods. bank transfer. Dismantling, relocation, installation, commissioning and geometric adjustment at the new location, can be carried out by us on request. Gkedpfx Aju U Hvwspwja We will be happy to submit a separate offer for this. Delivery of the machine to other EU countries is also possible on request.

Condition: excellent (used), functionality: fully functional, WMW Germany GFL-400 x 1000 mm Thread Milling Machine Manufacturer: WMW (Germany) Model: GFL-400 Centre Height: 205 mm Gkedpfx Apjytirnowja Maximum Workpiece Length: 1000 mm Maximum Workpiece Diameter over Cross-Slide: 200 mm Maximum Swing Diameter over Bed: 400 mm Cutter Speeds: 55 rpm to 250 rpm Maximum Cutter Diameter: 100 mm Spindle Bore: 80 mm - Suitable for thread milling, worm milling, and spline milling. - Also capable of gear hobbing and spline hobbing. - Supplied complete with change gears, index plates, arbors, and additional accessories. - The machine is in excellent working condition.

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). Gksdpfxsw Uf Tko Apwea The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: ready for operation (used), Year of construction: 1990, Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible. Godpfx Ajw U T Ucopwoka

Condition: good (used), Year of construction: 1983, machine/vehicle number: 7486, functionality: fully functional, spindle mount: MK 2, total width: 480 mm, total length: 620 mm, total height: 1,295 mm, overall weight: 165 kg, spindle speed (max.): 2,800 rpm, spindle speed (min.): 450 rpm, stroke length: 100 mm, Solid bench drilling machine for individual or series production in good condition (used). Gjdpfx Aowgfkujpwska

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm Godpfx Apewi Tidjwska number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

Condition: good (used), Year of construction: 1985, machine/vehicle number: 5028830, Offer 26070 Gedpeyrfxbsfx Apwska Technical Data: - Max. load capacity in horizontal position: 7500 kg - Faceplate dimensions: 1500 x 1500 mm - Motorized tilting of the faceplate: 0 – 120° - Rotational movement electrically adjustable, stepless: 0.0028 – 1.04 rpm - Right and left rotation - Welding current transmission: approx. 500 A - Drive: 400 V x 25 kW - Table height in horizontal position: approx. 1600 mm - Handheld remote control - Required space approx. W 2000 x H 1600 x D 2450 mm - Weight approx. 5500 kg

Condition: used, Year of construction: 1985, Offer 25995 Technical Data: - Pressing force 1600 KN / 160 t - Pressure regulation 0 - 160 t Gksdpfswp Eguex Apwea - Stroke length approx. 0 - 600 mm - Max. installation depth with straightening bar 1050 mm - Max. installation depth without straightening bar 1400 mm - Stroke speed approx. 0 - 0.6 m/min - Tool height approx. 400 mm - Drive 380 V / 11 kW - Space requirement approx. B 3600 x H 1400 x T 1800 mm - Weight approx. 6500 kg - Accessories - height-adjustable side support rollers - Straightening tool for straightening long material - Straightening bar 1300 x 400 mm with over - Threaded spindle, laterally adjustable supports

Condition: good (used), machine/vehicle number: 14012, Offer 14012 Technical data: - Length approx. 3000 mm Godpfx Apsw Rnf Iewjka - Width approx. 1500 mm - Material thickness of the top plate approx. 55 mm - Total height of the ribbed plate approx. 185 mm - Subframe - Total height with subframe 730 mm - Weight approx. 3500 kg

Condition: new, empty load weight: 930 kg, maximum load weight: 1,570 kg, overall weight: 2,500 kg, axle configuration: 2 axles, loading space length: 5,520 mm, loading space width: 2,320 mm, loading space height: 2,670 mm, loading space volume: 34.2 m³, color: white, construction height: 2,000 mm, working width: 1,810 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, unbraked, tandem with plywood body 15mm roof/walls, braked, 6 lashing eyes, * IMMEDIATELY AVAILABLE * Tandem with plywood body 15mm roof/walls, braked, 6 lashing eyes Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2500kg - Unladen weight: 930 kg - Payload: 1,570 kg - Interior dimensions: 407 x 181 x 200 cm (L x W x H) - Overall exterior dimensions: 552 x 232 x 267 cm (L x W x H) - Loading sill height: 56 cm - Tires: 195/65R15 steel rim - Brake: yes - Support wheel: yes - 100km/h: at extra charge - incl. vehicle documents Vehicle body: - Floor: Wood, screen-printed board 18mm - Walls: 18mm plywood, GRP coating - Roof material: 18mm plywood, GRP coating - Chassis: ALKO rubber spring axle - Number of lashing eyes: none - Rear door: yes, double-leaf - Tailgate: no - Tailgate material: - - Tailgate/door function: espagnolette lock - Clearance dimensions tailgate/flap: 168x196cm - Interior light: yes, with switch - Supports: at an extra charge - Overrun device & brakes: yes - 100km/h: incl. vehicle documents Frame/chassis: V-drawbar, hot-dip galvanized - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Sturdy V-drawbar, hot-dip galvanized - Tandem axle - ALKO overrun device - Floor panel 18 mm thick - Side walls and roof made of multilayer wood, 18 mm thick, with UV-resistant GRP coating - Extra smooth side walls, perfect for your advertising lettering! - Interior light fitted - 2-leaf rear doors - Doors with special sealing profiles, made of hard/soft plastic - Galvanized espagnolette lock and hinges - Support wheel, automatic - Automatic reverse drive - Plastic mudguards - 13-pin plug - Reversing lights - Large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - body: splash-proof - registration papers: ZBII & COC papers Accessories can be retrofitted - please enquire: - anti-theft device - rear supports - 100km/H approval with wheel bumper - side door - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - slot-and-hole rails for tensioning straps & locking bars - bar strip with rubber coating for tensioning straps & locking bars - steel or aluminum locking bars - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Gkjdpfx Apeu Htmcjwsa

Condition: used, Manufacturer: Mineralwerke Type: PZ 250 M4 Voltage: 380 V Output: 55 kW Gjdpfeh D Hmvox Apwjka Weight: 1950 kg

Condition: ready for operation (used), Year of construction: 1989, Gear hobbing machine models FD-250, FD-500, FD-630, and FD-900 Manufacturer: CUGIR, ROMANIA Maximum module size: 6 to 12 mm Gkodszuddtspfx Apwoa Max. working diameter: 250 to 900 mm Accessories: change gears and arbors for all machines Videos showing all machines in operation are available!

Condition: new, Catalog number: RE066 TECHNICAL DATA - Main blade diameter: ⌀250 – 350/30 mm - Scoring blade diameter (operates only with the main blade ⌀300, 350 mm): ⌀120/20 mm - Main motor power: 4 kW - Scoring motor power: 0.75 kW - Rotational speed: 4000 rpm - Scoring blade rotational speed: 8800 rpm - Blade tilt: 0 – 45° - Max. cutting length: 3200 mm - Moving table stroke: 3400 mm - Cutting width with parallel guide: 1250 mm - Splitting knife: ⌀350 mm - Parallel fence adjustable to angles of 90° – 45°, accuracy ±1° Gsdpsztncqofx Apwoka - Max. cutting height with ⌀300 mm blade: 95 mm - Max. cutting height with ⌀350 mm blade: 120 mm - Upper dust extraction port diameter: ⌀80 mm - Lower dust extraction port diameter: ⌀100 mm - Weight: 650 kg ADVANTAGES – New machine – CE certificate – Warranty The 3200mm version is equipped with a hood and a 45° side guard. The saw does not include blades. Net price calculated according to the euro exchange rate. (In case of significant exchange rate fluctuations, the price may change.) Net price: 26000 PLN Net price: 6190 EUR, depending on the exchange rate of 4.20 EUR (Prices may change with higher fluctuations.)

Condition: used, mileage: 5,33,862 km, power: 375 kW (509.86 HP), first registration: 04/2023, fuel type: diesel, empty load weight: 8,451 kg, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: VEB, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, front tire size: 315/70 R22.5, rear tire size: 315/70 R22.5, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, central locking, compressed air brake, cruise control, differential lock, fog lights, onboard computer, parking heater, spoiler, truck registration, | Volvo FH 500 | XL cab, | Lane departure warning system, cruise control, sunroof | EURO6, I-Shift, VEB+ | Refrigerator | Hands-free system, multifunction steering wheel | Auxiliary heater, heated seats | Electric windows, electrically adjustable and heated mirrors | Radio | Subject to errors, typos, and prior sale. Gedpfx Apezt R Snewska

Condition: excellent (used), Year of construction: 2004, Arburg 270 S 250-60 (2004) Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Mold Opening Force (Max.): 14 kN Machine Dimensions (W × D): 1250 mm × 3800 mm Machine Weight: Approximately 1900 kg Screw Diameter: 22 mm Stroke Volume: 39 cm³ Injection Pressure: 1810 bar Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Godpfx Apjxl Tp Tswjka Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine

Condition: good (used), Year of construction: 2000, Arburg 420 C 1000-250 (2000) Clamping force : 100 t Screw diameter : 30 mm Gsdpjxqcrzsfx Apwoka Distance between tie bars : 420 x 420 Shot weight : 100 g Max mold hight : 200 m Max opening : 730 g Hydraulic cores : 0 \+ robot TECHNOMATIC

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2000 bar Working hours: 7397 h Gksdpfx Apsvl Skaewja

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Gedpfx Apjvl Skgswska Distance between tie bars: 270x270 mm Opening max: 275mm Min Mould height: 200 mm Mold platens size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm3 Shot weight: 17 g Injection pressure: 2500 bar Working hours: 38.035 h

Condition: good (used), Year of construction: 2006, Controll: NC4 Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Gedpfx Ajrgw Exopweka Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: like new (used), Year of construction: 2018, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. Gkedpeyfg D Sofx Apwea : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2.000 bar Working hours: 15.571 h

Condition: excellent (used), CATALOG NUMBER 7751 TECHNICAL DATA - Track width: 250mm - Working width of roller: 250mm - Max blade diameter: 300mm - Blade bore diameter: 60mm - Max cutting height: 100mm - Table width with extension: 520mm - Table length: 1580mm *from above: - pawls: 2 rows - metal pressure slip roller - shaft with saw blades Godpfx Apszr Izkeweka - smooth metal slip roller *from below: - slip roller - guide rail - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor: 0.75kW - main motor: 15kW - extraction port diameter: 200mm - overall dimensions L/W/H: 1640x1400x1550mm - weight: 1000kg ADVANTAGES – Italian manufacture – in very good condition – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (if there are significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2001, operating hours: 38,850 h, clamping force: 25 kN, displacement volume: 20 cm³, injection pressure: 1,810 bar, overall weight: 1,900 kg, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Gjdpfeyt R S Asx Apwoka