Used Vessel Turning Unit for sale (37,847)

Condition: not inspected (used), Year of construction: 2014, Cooling capacity: 10.1 kW Guedpfx Alsy Nif Iebsc Flow rate: 5,000 L/h Weight: 180 kg The unit is ready for immediate shipment and is available immediately!

Condition: used, L + Z Lathe PRÄWEMA Machine No. 903 Year of manufacture 1968 Center distance 1000 mm Turning diameter over bed 400 mm Turning diameter over cross slide 240 mm Center height over bed 200 mm Center height over cross slide 120 mm Spindle bore 36 mm Feed longitudinal and transverse Chuck mounting Short taper DIN 55027 Size 6, 4x M12 Tailstock internal taper MK 4 Tailstock quill travel 120 mm Spindle speed 25 - 3000 rpm, 18 steps Drive power 4 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 18 gear stages - 3-jaw chuck RÖHM Ø 250 with a set of stepped jaws - Swiveling universal tool holder - Emergency stop button - Change gears Space requirement L x W x H 2100 x 850 x 1350 mm Guodpfxszc Nt Rj Albec Weight 1260 kg

Condition: used, Demag plasticising unit IU mm - removed from Demag Ergotech system 200-560-320 - removed from running machine - fully functional - displacement: 231 cm³ - injection pressure: 1855 bar - moulded part weight max. PS: 210 g - cylinder E: .01 mm, A: .01 mm   - screw E: 39.55 mm, A: 39.8 mm, RSP 39.92 mm - Ø - 06--DEM-001 - year of manufacture 2005 - also suitable for IU320 and IU610 - nut and coupling must be exchanged manufacturer: Demag Dition: gebraucht Gedjh Nv Itepfx Albjuc

Condition: excellent (used), Year of construction: 2019, operating hours: 403 h, functionality: fully functional, turning length: 1,200 mm, spindle bore: 120 mm, controller model: Siemens 840 Dsl, Equipment: documentation/manual, Technical data: Turning length 1200 mm Chuck diameter 350 mm Working stroke X top/bottom 200 mm Working stroke Y. axis 210 mm (+130/-80) Working stroke Z. axis 1200 mm Maximum travel speed W/X/Y/Z meters/minute 45/40/40/46 Ball screw diameter W/X/Y/Z mm 40/40/40/40 Profile rail guide, B/X/Y/Z mm 45/45/45/55 Tool flight circle 700 mm Maximum center distance 1200 mm Main spindle/counter spindle Spindle bearing diameter 120 mm/160 mm Spindle passage 65/105 mm Spindle bore diameter 80/120 mm Spindle flange/spindle head DIN 55026 A6 / A8 Drive power 100% ED 22 KW/67.4 Drive power, 40% ED 24 KW/80 Nominal speed 1400 rpm Maximum speed 5,700 rpm Torque 100% ED 150 nm/585 Torque 40% ED 191 nm/795 C-axis resolution 0.001 degrees Godpevw Upcefx Albouc Both turrets: Tool holder: VDI 40 Maximum speed rpm 6000 torque drive 12,000 speed drive Maximum drive power kW: 28.5 torque drive 23.5 speed drive Maximum torque (25% ED) Nm: 85 torque drive 56 speed drive Dimensions: 4500 x 2500 x 2500 Weight approx. 16000 kg Control: Siemens 840 Dsl

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm Gusdsytn Emspfx Albsc FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Condition: good (used), Year of construction: 2008, 1 used CNC turning/milling center Gildemeister Gusdpfjq T I Izex Albsc type TWIN 65 RG 2 year 2008 with Siemens 840 D Maximum turning length (travel in the Z axis) 650 mm Maximum turning diameter over bed 250 mm Maximum length of travel in the X-axis 300 mm Maximum feed speed X-axis 30 m/min Maximum feed speed Z axis 30 m/min Maximum main spindle power 35 kW Spindle diameter 65 mm Minimum main spindle speed 20 1/min Maximum main spindle speed 5000 1/min Lathe length 7000 mm Lathe width 4700 mm Lathe height 2500 mm Lathe weight 10 t Machine equipment Y axis Irco loading magazine ILS RBK 1200 mm Workpiece pick-up device Technical data Errors excepted Please note that the machine is sold without chucks, as these remain with the seller!

Condition: good (used), Year of construction: 2008, 1 used Doosan turning and milling center type Puma Mx 2000 T year 2008 with Fanuc 16 i-TB control Max. turning diameter 540 mm Max. turning length 1,020 mm Milling spindle Drive power: 18.5 kW Max. spindle speed: 10000 rpm B-axis: 240° Tool magazine / ATC Tool places: 80 Main spindle Drive power: 15 kW max. spindle speed 5,000 rpm max. bar capacity 65 mm Lower turret with 12 driven tool positions max. spindle speed: 4,000 rpm Chip conveyor and coolant system Gusdpfx Asqqivvslbjc Weight 12 tons Height of the machine 2600 mm Technical data Errors excepted

Condition: good (used), Year of construction: 2023, CNC multi-axis turning center Manufacturer: Hyundai WIA Type: LM1800TTSY Control: Siemens 840D Shopturn with 3D simulation Year of construction: 2023 Technical data: Incline bed design with box guide in X/Y axis, Z-axis with linear guide Counter spindle and twin turret system Travel distances: X/X1: 165 / 195 mm Z1/Z2: 700 / 720 mm ZB: 668 mm Y: 100 mm Rapid traverse rates: X/Y/Z: 20 / 7.5 / 40 m/min Max. turning diameter: 230 mm Max. turning length: 673 mm Spindle nose: A2-6 Spindle bore / bar capacity: 76 / 65 mm Spindle speed: 5,000 rpm (both spindles) Drive power: 2x 22 / 11 kW Turret & milling unit: Gujdpfxey Hfrle Albjc 2 turrets each with 12 stations (optional 24) System: BMT55P Milling drive: Speed: 5,000 rpm Power: 5.5 / 1.1 kW Equipment: Automatic measuring arm Coolant tank 270 liters Direct path measuring system (X1/X2, Z1/Z2, Y) Temperature compensation for coolant (with air conditioning unit) High-pressure cooling 20 bar Chip conveyor (belt conveyor) Siemens network extension Bar loader interface Extensions & accessories Software & electrical: ShopTurn with 3D simulation Machine transformer Measuring & automation technology: Automatic Q-Setter Renishaw Linear positioning sensor (for main and counter spindle) Workpiece handling: Part catcher for main spindle Part catcher for counter spindle with belt discharge Workpiece ejector Clamping technology: Spanntop mini from Hainbuch Main spindle (AX puller size 65) Counter spindle (AX fixed size 65) Peripherals: Bar loader magazine Sprint 565 S2 from LNS For bars up to 3,000 mm length Diameter: 5 – 65 mm Reduction sleeve set (various diameters) Extraction system Purchase price in 2023: 330,000 Euros The machine has been little used and is in very good condition.

Condition: used, 3 St. Gsdozczg Nepfx Albjuc length 1.250 mm height 700 mm Holz-Her Type 1117 feed mechanism for the smooth and safe feeding of workpieces into routers, circular saws, and other woodworking machines. The feed device ensures a constant feed rate, improves machining quality, and enhances workplace safety during woodworking.

Condition: used, mileage: 1,05,901 km, power: 382 kW (519.37 HP), first registration: 07/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2026, color: white, gearing type: automatic, Year of construction: 2024, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), navigation system, parking heater, soot filter, Tractor Unit 4X4 Hydrodrive MAN TGX 18.520 BL SA First registration 07/2024 Mileage 105,901 km Gusdpsy Aq Tgofx Alboc GM cab with 2 bunks, cab air suspension, swinging steps, 3-piece steel bumper, Light & Vision Plus safety package, driver comfort package, interior lighting package Plus, storage package, comfort driver's seat. Driver's seat heated and ventilated, rotating vario passenger seat, fully LED lighting, LED headlights, LED fog lights, high beam assistant, automatic driving light control, 12.3-inch instrument cluster, MAN truck navigation, Climatronic air conditioning, auxiliary water heater, fridge under the bunk, 220-volt socket. MAN TipMatic 12.28 OD gearbox functions: EfficientRoll, Idle Speed Driving, rocking function, off-road shifting program, dynamic engine torque management, reinforced engine brake EVBec Suspension: leaf/air Wheelbase 3,600 mm, short and highly maneuverable Aluminum fuel tank 580 liters 2-line MEILLER tipper hydraulics, large aluminum hydraulic oil tank approx. 200 L, switchable high/low-pressure system. Tyres: Front axle 385/65 R 22.5, tread depth NEW, 100% Rear axle 315/80 R 22.5, tread depth 10 to 12 mm Fifth wheel height approx. 1,220 mm Full safety package with Lane Change Assist LCS and Turning Assist, ACC distance cruise control, EBS, full braking assistant, emergency braking assistant EBA, Lane Departure Warning LDW, digital axle load display, traffic sign recognition. RENTING is the new BUYING—immediately available from us in full-service rental.

Condition: used, mileage: 44,637 km, power: 375 kW (509.86 HP), first registration: 02/2025, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, color: black, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 AERO Turbo-Compound 4X2 Low-Liner Tractor Unit First Registration: 02/2025 Mileage: 44,637 km Condition: Like new Globetrotter XL Safety Cab, cab air suspension, Comfort Package, Electrical Package, Extended Living Package, 2 bunks, I-Park Cool stationary air conditioning, comfort driver and passenger seats, heated, camera-monitor system with close-range camera, 220-volt socket, stainless steel microwave Diesel engine 12.8 L displacement, turbo compound charger, 510 HP / 375 kW, 2,856 Nm torque Reinforced engine brake Volvo Engine Brake+ I-Shift 12-speed gearbox, I-See with map-based topography and traffic information Gujdpfey D E E Hjx Alboc Tyres: Front axle 355/50 R 22.5 Rear axle 295/55 R 22.5 Height-adjustable fifth wheel for coupling heights of 980 and 1,150 mm Black gloss steel rims Three ride heights for air suspension Dual battery system Fuel saving package 475 L and 505 L fuel tanks, AdBlue tank 99 L Extended Safety Package with active lane guidance, Volvo Dynamic Steering, and all available safety systems, complete LED lighting, 5x LED work lights Full aerodynamic kit including side skirts between the axles NATO socket RENTING is the new BUYING – available from us with full-service and rental-purchase options.

Condition: used, mileage: 1,82,283 km, power: 382 kW (519.37 HP), first registration: 02/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: black, gearing type: automatic, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGX 18.520 LL SA Low-Liner Mega Tractor Unit First registration: 02/2024, from first owner Mileage: 182,283 km GX Cab (the largest version), 1 bed, large retrofitted overhead storage compartments/lockers at the rear, cab air suspension, safety package for light and visibility, driver's comfort package, comfort driver's seat, electric glass sunroof, safety glass door windows, full LED lighting, 2x air horns, electric PARKED AIR CONDITIONING, auxiliary water heater, Climatronic, additional thermal and acoustic cab insulation, refrigerator, 220-volt socket, MICROWAVE installed in the storage compartments, MAN Truck navigation, MAN sound system, windscreen visor painted in cab colour, roof lamp bracket with 4x LED high beam headlights Double tank system: 2x 480L = total 960 litres RETARDER and additional high-performance engine brake EVBec Automated transmission MAN TipMatic 14.30 OD, transmission functions Include Idle Speed Driving, Performance, and Efficiency modes Full air suspension with ECAS lift/lower function Tyres: Gusdjzcix Tepfx Albec Front axle: 355/50 R 22.5 Rear axle: 295/60 R 22.5 Fifth wheel height: 960 mm Comprehensive safety package with ACC cruise control with stop-and-go function, lane departure warning LDW and lane change assist LCS, rain sensor, light sensor/high-beam assistant, emergency brake assist EBA, full braking assistant, ESP, ASR, ABS/EBS, RENTING is the new BUYING – immediately available from us as full-service rental or leasing.

Condition: used, mileage: 21,565 km, power: 353 kW (479.95 HP), first registration: 03/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, color: black, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 22.480 BL SA 4X4 Full All-Wheel Drive Also available with LoF tractor approval for 60 km/h First registration: 03/2025 Mileage: only 21,565 km TM cab with high roof, driver comfort package, construction site package, comfort cab suspension, 1 bed, multifunction leather steering wheel, comfort driver's seat with seat ventilation, water auxiliary heater, automatic climate control, MAN sound system with subwoofer, truck navigation system with large colour display, STABO CB radio, electric glass sunroof, LED daytime running lights, LightFix roof bar with 2 spotlights, 2 x rotating beacons on the cab Automated MAN TipMatic 12 28 OD transmission with off-road software, EfficientRoll, Idle Speed Driving, and rocking mode High-performance engine brake MAN EVBec, multi-stage Front axle with parabolic suspension Rear axle with AIR SUSPENSION and raise/lower function 2-circuit tipping hydraulics, switchable between high-pressure/low-pressure system, aluminium oil tank 195 L Wheelbase: 3,600 mm Differential locks on front axle, rear axle and centre differential Diesel tank aluminium 390 L Tyres: Front axle: 385/65 R 22.5 Rear axle: 315/80 R 22.5 Fifth wheel height approx. 1,320 mm If required, available with low-pressure/agricultural tyres: Front axle: 445/65 R 22.5 Rear axle: single tyres 600/50 R 22.5 Maximum speed 60 km/h Safety package with ABS off-road logic, ESP, ASR, ESS emergency braking signal, Emergency Brake Assist, lane departure warning LDW, attention assistant MAN AttentionGuard Guodpfsy Nvr Usx Albsc RENTING is the new BUYING – Full-service rental available from us immediately.

Condition: used, mileage: 17,427 km, power: 412 kW (560.16 HP), first registration: 10/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2026, brakes: retarder, color: grey, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGX 18.560 4X2 LL SA Low-Liner with the new D30 "Super" engine from SCANIA First registration 10/2025 Mileage: 17,427 km Long-distance GX driver’s cab, 2 bunks (comfort version with slatted frame), air suspension cab, Light & Sight Plus safety package, Advance safety package, Driver Comfort Plus package, electric glass sunroof, premium heated driver’s seat with seat ventilation, multifunction leather steering wheel, light sensor with automatic high beam, rain sensor, interior lighting package, LED headlights, LED daytime running lights, LED fog lights, LED rear lights, LED side marker lights, rotating beacon on cab, Professional 12.3-inch instrument cluster, MAN truck navigation with online traffic, MAN sound system with subwoofer, EasyControl panel in driver’s door, Climatronic automatic air conditioning, 4 kW water heater, additional thermal and acoustic cab insulation, STAND AIR CONDITIONING, STABO CB radio, side window wind deflectors, rubber floor mats, LED beacons Front and rear axle air suspension with raise and lower function Tyres: Front axle: 355/50 R 22.5 Rear axle: 315/60 R 22.5 Fifth-wheel height approx. 950 mm Wheelbase 3,600 mm Aluminum diesel tanks left 530 L + right 330 L Enlarged AdBlue tank 135 L High-performance engine brake CRB + RETARDER MAN TipMatic 14.33, Idle Speed Driving transmission function, EfficientRoll Full safety package including DRIVER AIRBAG and belt tensioner, ESP, ASR, ABS, EBS, intelligent cruise control MAN EfficientCruise with PredictiveDrive, emergency brake assist, MAN SafeStop Assist, MAN ComfortSteering, lane change collision avoidance assist and turn assist Gujdpfxjy Nvrue Albjc RENTING is the new BUYING, available from us immediately as full service or lease purchase

Condition: new, Manual hand unit , J/N Guedpjytx T Usfx Albjc Automatic for single pieces Ja J/N Automatic for frames Ja J/N

Condition: used, Year of construction: 2007, power: 3 kW (4.08 HP), intake manifold diameter: 160 mm, filter area: 10 m², total height: 1,800 mm, total length: 1,700 mm, total width: 800 mm, overall weight: 200 kg, Equipment: CE marking, No. 04529 Mobile extraction unit / mobile dust extractor Felder RL 160 Used, year of construction 2007, good condition, machine comes from a small business Nominal air flow approx. 1750 m3/h Minimum air flow 1448 m3/h Maximum air flow 3250 m3/h Negative pressure at suction pipe 1720 Pa Nominal negative pressure 1120 Pa Extraction connection diameter 160 mm Motor 3 kW Residual dust content class H3, 0.1 mg/m3 Filter surface 10 m2 Design type B1, suitable for extracting combustible dusts of dust explosion classes St 1 and St 2 Manual filter regeneration 2 chip collection containers, each 200 l GS-tested CE-compliant Transport dimensions approx. 1700 x 800 x 1800 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse Godezcqxuspfx Albeuc

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK INTEGREX 200-IV ST x 1500 mm CNC Turning-Milling Center / Multitasking Turning Machine with Counter Spindle, Milling Spindle, Lower Turret, and 5-Axis Simultaneous Operation Capability. For sale is a very well-equipped Mazak Integrex 200-IV ST x 1500 mm with Mazatrol Matrix control, counter spindle, milling spindle, lower turret, 80-tool Capto C6 tool magazine, high-pressure coolant system, and finished parts unloading system with Schunk gripper. Previous Owner: High-End Medical Technology Company from Baden-Württemberg. Technical Data Manufacturer: Mazak / Yamazaki Mazak Type: Integrex 200-IV ST x 1500 mm Machine Type: CNC Turning-Milling Center / Turn-Mill Center Control: Mazatrol Matrix Serial Number: 2XXXXX Year of Manufacture according to Equipment List: 2009 Max. Turning Diameter: 660 mm Max. Turning Length: 1,495 mm Travel Ranges: X1-Axis: 580 mm X2-Axis: 150 mm Y-Axis: 160 mm Z1-Axis: 1,545 mm Guodpfx Alszc Hipjbec Z2-Axis: 1,490 mm W-Axis: 1,550 mm Main Spindle: Spindle Power: 22 kW Max. Main Spindle Speed: 5,000 rpm BB08 Ø 210 mm Internal Draw Tube: Ø 65 mm Counter Spindle: Spindle Power: 18.5 kW Max. Counter Spindle Speed: 5,000 rpm Full C-Axis on the Counter Spindle Milling Spindle: Milling Spindle Power: 18.5 kW Max. Milling Spindle Speed: 12,000 rpm Tool Holder: Capto C6 Tool Magazine: 80-tool Lower Turret: 9-station Lower Turret 15-bar Pump for Lower Turret available / prepared Equipment / Options Mazatrol Matrix Control 5-Axis Simultaneous Machining on the Main Spindle Tool Center Point Control Tilted Working Plane EIA / ISO Programming EIA 3D Compensation High Smoothing Control Rotation / Coordinate Rotation Geometric Function Scaling Function External Data I/O Sub-C-Axis Control Inverse Time Auto TLM Polar Coordinates Input Comparison Stop G54.1 Synchronized Thread Cutting on the Milling Spindle Flash Tool / Flash Tool Preparation Variable 600 Sets Cylinder Function EIA Helical Tap Cycle EIA Pattern Cycle 2nd Auxiliary Functions Ethernet Operating Function including Network Card Network / Ethernet Running Coolant / Chip Conveyor / Peripherals High-Pressure Coolant System, Manufacturer: Streamware Preparation for High-Pressure 70 bar Reinforced Pump for Cover Flushing 15-bar Pump for Lower Turret Flushing System 2.7 bar on Main Spindle Flushing System 2.7 bar on Counter Spindle Chip Conveyor available, Manufacturer: Mayfran (identifiable) Oil Mist Extraction / Air Filter System, Manufacturer: LTA (identifiable) Finished Parts Unloading System with Schunk Gripper Preparation for Bar Feeder Preparation for Multi-Tool Holder Signal Light Yellow Overload Monitoring Clamping Devices / Accessories 2 pcs 3-jaw Chuck, Manufacturer: Kitagawa 1 pcs Hainbuch AxisFix mini Existing Turning Tools available upon request Capto C6 Tool Magazine with 80 Positions Electrical Data according to Nameplate / Photo Voltage: 3 AC 400 V Frequency: 50 / 60 Hz Max. Current Consumption: 128 A Rated Short-Circuit Breaking Capacity: 30 kA Manufacturer: Yamazaki Mazak Corp. VDE Inspection available, Next Inspection Date according to Inspection Label: 10/2026

Condition: like new (used), number 4 Stück weight 3,8 kg range L-W-H 180 x 180 x 70 mm Multi Quick MQ 130 Set - (clamping force 35 kN) This infinitely adjustable clamping element is characterised by its high horizontal and vertical adjustability, thanks to the triple Gedozc Rrujpfx Albouc clamping shoe and integrated bearing plate. It is designed for light machining applications, thanks to the aluminium clamping shoe. --> high clamping force --> low tightening torque --> dual infinitely variable adjustment range --> high adjustability thanks to integrated bearing plate --> high clamping heights thanks to multi-clamping shoe Price per unit, discount available for bulk purchases

Condition: used, INFICON T-Guard2 Control Unit 540-200 Control and evaluation unit for the INFICON T-Guard2 vacuum monitoring system. Industrial leak detection and tightness testing system with a variety of interfaces for system integration. Manufacturer: INFICON Type: T-Guard2 Model: 540-200 Device type: Control Unit Supply voltage: 24 V DC Current consumption: max. 6 A Interfaces: RS232 Interfaces: PLC I/O Interfaces: Recorder output Connection: Control Unit Port Guedpjzdaixofx Alboc Technology: Wise Technology Year of manufacture: 2021 Condition: used

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. Guodpfx Aleq N Ud Ijbsc 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, CNC controller: MSX-711 (MAPPS IV) Capacity Turning length mm: 1.540 Max. turning diameter mm: ø ø610 (Turret 2 ø274) Swing over bed mm: ø ø660 Swing over cross-slide mm: ø660 (Turret 2 ø300) Turn-mill spindle Full indexing specifications X-axis travel mm: 495 Gsdpfx Alewztq Esbouc Y-axis travel mm: ±125 Z-axis travel mm: 1.560 B-axis degree: ±120° Speed ​​spindle rpm: 12.000 Drive power kW: 18,5/11 (10 min./cont) Tool magazine Magazine places: 76 Tool holder: Capto C6 Lower turret Number of tool slots St .: 10 Indexing time s: 0,19 Main spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Counter spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Equipment Spindle 2 with tailstock option Electronic Handwheel Interface High-pressure coolant system Chip conveyor Air blow for chuck and tool tip Auto tool presetter for upper and lower Bar feeder interface Hobbing function

Condition: used, Year of construction: 2012, Technical details: turning diameter over bed: 20 mm spindle passage: 3-20 mm turning length: 250 mm control: FANUC 31 i-A main-spindle speed: 10.000 1/min subspindle speed: 10.000 1/min Main spindle capacity: 3,7 kW subspindle power: 2,2 kW number of tools: 35 Gjdpfx Alsvivx Nobouc weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,11 x 1,2 x 1,89 m CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short turning Deep hole drilling stations NAKANISHI high-speed spindle Rear slide with Y-axis Cross drilling rear side Chip conveyor Fire extinguishing system FMB bar loader Minimag 20, year 2012 Approx. 7.200 working hours *

Condition: ready for operation (used), Siemens 1FT6105-1AC71-1EH1 motor, serial number: YFW812461001001, with AM2048S/R F48 encoder and 24VDC / 31.0W brake 3005701, used, in good condition, 100% functional, scope of delivery as shown in the photos. Gujdpfx Aezc Twmelbjc

Condition: ready for operation (used), KUKA 1FK7101-5AZ91-1ZZ9-Z S07 servo motor, serial number: YFW150671153009, used, in good condition, 100% functional, scope of delivery as shown in the photos. Guodpfx Aljzc Tvpebsc

Condition: ready for operation (used), KUKA 1FK7105-5AY81-1YY3-Z S18 servo motor, serial number: YFF9651609324007, used, in good condition, 100% functional, scope of delivery as shown in the photos. Godpfszc Tv Ajx Albjuc