Used Vicor Vi-241-Cu for sale (5,524)

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Knedpfxozlktpe Afdsb Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,728 h, functionality: fully functional, machine/vehicle number: 0040001634C, turning length: 500 mm, turning diameter: 240 mm, spindle motor power: 1,400 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 170 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, torque: 1,71,192 Nm, feed force X-axis: 3 N, The DMG MORI CTX Alpha 500 was manufactured in 2022. This versatile turning center is equipped with a Siemens controller and LNZ Quick load servo 80S2. Weight: 4,300 kg. Please contact us for more information about this machine. Knsdpfx Afsyz S T Sjdeb

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: WF0EXXTTRENT79540, mileage: 61,048 km, first registration: 08/2022, fuel type: diesel, empty load weight: 2,149 kg, maximum load weight: 1,351 kg, overall weight: 3,500 kg, tire size: 235/85 R 16C, tire condition: 90 %, axle configuration: 4x2, wheelbase: 3,300 mm, fuel: diesel, energy efficiency: A+, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 3, total length: 5,540 mm, total width: 2,060 mm, total height: 2,450 mm, loading space length: 2,950 mm, loading space width: 1,580 mm, loading space height: 1,710 mm, Year of construction: 2022, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, central locking, electronic stability program (ESP), fog lights, hill-start assist, onboard computer, power mirror, sliding door, traction control, BRAND FORD TYPE PANEL VAN SERIES L2H2 MODEL TRANSIT 350 L2H2 TREND 2.0 REGISTRATION DATE 08/2022 MILEAGE 61,048 km POWER (HP/KW) 130 HP EMISSION Euro 6D CONDITION Used CONFIGURATION: STANDARD PANEL VAN WITH BLOCKSHAFT ON REAR DOORS AND SIDE DOOR Kodeyw Tcyspfx Afdonb ABS - AUTOMATIC CLIMATE CONTROL --CRUISE CONTROL - ELECTRIC WINDOWS - START & STOP- FRONT-WHEEL DRIVE _____ ALL VEHICLES FOR SALE CAN BE INSPECTED AND TESTED. OUR SALES TEAM IS AVAILABLE FROM MONDAY TO FRIDAY FROM 8:30 AM TO 6:00 PM AND ON SATURDAY FROM 8:00 AM TO 12:00 PM. TO REACH US BY CAR: MOTORWAY A31 EXIT THIENE, BY TRAIN: FS STATION THIENE. Dealer: Trucks Italiana srl

Condition: repair required (used), functionality: fully functional, machine/vehicle number: XLRTEH4300G211505, mileage: 6,63,963 km, first registration: 05/2018, fuel type: diesel, tire size: 315/80 R 22.5, tire condition: 90 %, axle configuration: 4x2, next inspection (TÜV): 01/2027, energy efficiency: A+, fuel tank capacity: 850 l, brakes: intarder, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, total length: 6,160 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2018, Equipment: ABS, EBS, air conditioning, central locking, differential lock, fridge, had accident, parking air conditioner, parking heater, seat heater, VEHICLE DAMAGED ON THE FRONT RIGHT SIDE - VALID INSPECTION UNTIL 01/2027 THE VEHICLE RUNS AND IS IN WORKING CONDITION DAF XF 106-530; 663,963 KM; AUTOMATIC TRANSMISSION WITH RETARDER; YEAR 05/2018; -€6 ACCESSORIES: Knodpfxezx D Rze Afdeb ABS - AIR CONDITIONING - DIFFERENTIAL LOCK - MULTIMEDIA SYSTEM - ELECTRIC WINDOWS - AIR/COMFORT SUSPENSION SEATS - CRUISE CONTROL - SIDE AND TOP SPOILERS - TOOLBOX - CENTRAL LOCKING - SIDE SKIRTS - VENTILATED AND HEATED SEATS - STATIONARY AIR CONDITIONING - UPPER LIGHT BAR ALL VEHICLES FOR SALE CAN BE INSPECTED AND CHECKED, ALLOWING THE CUSTOMER TO CHOOSE THEIR PREFERRED TYPE OF RECONDITIONING. OUR SALES STAFF IS AVAILABLE FROM MONDAY TO FRIDAY, 8:30 AM TO 6:00 PM, AND ON SATURDAY, 8:30 AM TO 12:00 PM. TO REACH US BY CAR, TAKE THE A31 MOTORWAY AND EXIT AT THIENE. BY TRAIN, ALIGHT AT THE THIENE TRAIN STATION.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: C3030, type of input current: three-phase, total width: 1,900 mm, total length: 4,200 mm, input voltage: 400 V, input current: 50 A, feed length X-axis: 1,700 mm, feed length Y-axis: 1,700 mm, feed length Z-axis: 300 mm, working width: 1,700 mm, total height: 850 mm, repeat accuracy: 0.1 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 1 m/min, cutting width (max.): 1,700 mm, cutting height (max.): 80 mm, compressed air connection: 6 bar, Complete Textile Cutting & Spreading Equipment Line – KURIS, ZSK & MAYER – Automatic Cutter, Spreading Machines, Presses Professional textile production equipment available for sale, including automatic cutting systems, spreading machines, embroidery equipment, industrial presses, and accessories. All machines were used in industrial garment production and are available for inspection. Also available more than 200 sewing,ironing machines (Juki, Durkop Adler, Veit) Contact for more info. Location: Ruse, Bulgaria Delivery terms: EXW (Incoterms 2020) All prices are net prices (excluding VAT, dismantling, loading, and transport). Cutting Equipment 1 × KURIS C3030 Automatic Cutter KURIS automatic CNC textile cutting system. Like new condtion always serviced with original parts installed October 2019 Main Specifications Working width: 1700 mm Cutting height: up to 80 mm Automatic servo cutting system Vacuum table Industrial CNC control Suitable for textile and technical fabrics Set Price: EUR 45,000 Complete Spreading & Cutting Set: 1 × KURIS Pionier 322352 spreading machine 1 × KURIS Quick Lift 320919 fabric roll lifting machine 20-meter air-blowing spreading table KURIS automatic servo cutter KURIS band knife machine Set Price: EUR 9,000 Complete Spreading & Cutting Set: 1 × KURIS Pionier 322352 spreading machine 1 × KURIS Quick Lift 320919 fabric roll lifting machine 20-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 8,000 Cutting & Spreading Set: 1 × KURIS Quick Lift 320919 fabric roll lifting machine 17-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 6,000 Cutting & Spreading Set: 1 × KURIS Quick Lift 320919 fabric roll lifting machine 17-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 6,000 Spreading Tables: 1 × 10-meter spreading table Price: EUR 500 1 × 8-meter spreading table Price: EUR 500 Plaid Fabric Cutting Table with Awl Special table for precise plaid/check fabric alignment and cutting. Price: EUR 2,500 Knodpfjy Tp Sijx Afdob Embroidery Equipment 1 × ZSK 10-Head Embroidery Machine Industrial multi-head embroidery machine by ZSK. Price: EUR 5,000 Pressing Equipment 1 × MAYER RPS-M 1000 Press Mayer industrial pressing machine. Price: EUR 8,000 1 × MAYER AHV-BM 1370 Press Price: EUR 4,000 1 × MAYER APM-1150 Press Price:EUR 4,000 Additional Information feel free to contact me (Viber,Whatsapp) Machines can be inspected under power Professional dismantling available upon agreement Loading assistance available Transport can be arranged separately Suitable for garment factories, textile manufacturers, upholstery production, and industrial textile processing All prices are net prices (excluding VAT, dismantling, loading, and transport) Contact: G. Jordanov Location: Ruse,Bulgaria

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: 8071, functionality: fully functional, pressing force: 100 t, stroke length: 400 mm, overall weight: 21,000 kg, controller manufacturer: DELEM, controller model: DA65, working width: 3,000 mm, bending force (max.): 100 t, control type: CNC control, degree of automation: automatic, number of axes: 8, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, finger protection, Used Warcom Dinamica 3000 x 100-ton press brake, year 2008, an industrial machine designed for complex and large-format bending operations thanks to its advanced configuration with 8 controlled rear axes (Y1-Y2-Z1 – Z2 – X1 – X2 – R – X). CNC DELEM DA65. With a bending length of 3000 mm and a bending force of 100 tons, this machine is ideal for medium and high-volume applications, with the ability to handle complex geometries and structural components. Key features: Bending force: 100 tons Bending length: 3000 mm 8 controlled rear axes: Y1, Y2, Z1, Z2, X1, X2, R, X → superior flexibility for complex bending operations Model: Opera Robust and reliable construction Year of manufacture: 2004 A highly versatile press brake, suitable for metalworking workshops and manufacturing companies that require power, precision, and multi-axis control in a single solution. Knjdpszqtb Tsfx Afdjb

Condition: ready for operation (used), Year of construction: 2016, operating hours: 33,793 h, clamping force: 4,000 kN, screw diameter: 80 mm, overall weight: 31,000 kg, product length (max.): 10,259 mm, Hydraulic injection moulding machine manufactured in 2016. This Engel Victory 3550/400 tech features a clamping force of 4000 kN and an injection unit with a screw diameter of 80 mm. It includes a fully hydraulic tiebarless clamping system and advanced automation with conveyor belts. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 3550/400 tech machine we have for sale. Contact us for further details. Knodjz Dgpbepfx Afdeb • Injection unit: 3550 • L/D ratio: 25 • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) • Drive system: ECODRIVE SHV3-HSI, 2 pump systems, accumulator • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 282 kW • Clamping system: Tiebarless, fully hydraulic ENGEL clamping system • Centering: 160 mm • Ejector stroke: 250 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen • Vacuum/compressed air circuits: 4 on moving platen with Venturi nozzle and pressure switch • Pneumatic valve: 2/2-way valve R 1/4" on stationary platen • Pneumatic mold valve control: 4-fold FESTO, up to 16 bar • Mold heating: 32 control zones, max heating power 43 kW • Screw drive: Electromotoric, speed-controlled, max 150 rpm, rated power 47 kW, torque 3700 Nm • Nozzle radius: 15 mm • Nozzle bore: 6 mm • Nozzle contact force: approx. 150 kN • Metering stroke: 390 mm • MuCell equipment: MuCell Advanced Package; cylinder L/D 24/25; MuCell G25 screw Ø 80 mm; gas injector bore; melt pressure sensor; RS-485 interface to SCF gas plant; emergency stop connection • Mold temperature control: 3 ENGEL flomo distributors with 8 zones each (24 monitored circuits total) • Hydraulic tank capacity: Main tank approx. 690 l; suction tank approx. 290 l • Robot interface: Euromap 67 / AN-146 • Languages: Czech and German Additional equipment • GEKU automation with conveyor belts (included)

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 1,500 kg, loading space width: 3,000 mm, loading space length: 7,000 mm, loading space height: 2,600 mm, Equipment: air conditioning, lighting, Containers pictured are in stock and available for immediate delivery. Inspection and collection are possible on site. This offer includes Villex Mega Cube Nero containers, which can be used as office containers, sanitary containers, school containers, kindergarten containers, refugee containers, living containers, or site containers. Dimensions: 7.0 x 3.0 x 2.6 m Delivery: Nationwide delivery available Standard features: - Condition: New & assembled - Exterior colour: RAL 7016 (anthracite) - Interior colour: walls -> white, floor -> wood effect in blue & dark grey - External wall thickness: 50 mm - Surface area: 21 m² - Weight: 1500 kg - 1x entrance door (205cm*105cm) - 2x double windows (200cm*100cm) – single sash, fixed glazing, with tilt function - Includes double roller blind - Includes air conditioning for heating & cooling - Electrical: 8x power sockets, residual current circuit breaker + fuse, surface-mounted PVC wiring We manufacture your container entirely according to your individual requirements! Optional extras available at additional cost: - Custom dimensions, e.g., 9x3m, 4x2.4m, double containers, triple units, and more - Various window sizes - Various colours Kedpfx Afjy Egr Dsdonb - Floor colours - Practical forklift pockets - Air conditioning - Lighting - Roller shutters - Heating - Toilet, shower, washbasin - Kitchen unit - Rendered internal walls - And much more Delivery is usually carried out with our own vehicles. Payment can be made in cash upon delivery to our driver, or conveniently in advance via PayPal or bank transfer. Lead time for stocked standard containers is approx. 1–2 weeks nationwide after order confirmation, depending on postal code area. We manufacture and deliver custom containers within 1–4 weeks.

Condition: used, Year of construction: 2001, turning diameter: 210 mm, spindle bore: 53 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 6,000 rpm, overall weight: 6,500 kg, distance table center to spindle nose: 960 mm, OKUMA OSP-U100L control unit, with TOP AUTOMAZIONI XF370 bar feed system. Ksdpfxozw Nu Ns Afdsnb Workholding and tooling are not included. MUST BE PICKED UP BY SEPTEMBER 2026.

Condition: excellent (used), Year of construction: 2021, Used clean air dust collector with frequency converter Year of manufacture: 2021 Max. volume flow up to 10,000 m³/h at the fan Approx. 73 m² filter area Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content of 0.1 mg/m³ safely maintained (wood dust) Models with type-tested rotary valve airlock (FSA) Tested backflow flap Integrated automatic extinguishing system 350+ P Suction nozzle 355 mm Motor rated power 15.0 kW / 3-phase Voltage 400 V / 50 Hz Max. volume flow 10,000 m³/h Rated volume flow* 7,127 m³/h Negative pressure at Vnenn. 3,347 Pa Knjdpozizz Sjfx Afdeb Filter area 73 m² Chip collection volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2,361 Weight 1,074 kg Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, mileage: 8,92,883 km, power: 310 kW (421.48 HP), first registration: 02/2016, fuel type: diesel, maximum load weight: 12,900 kg, overall weight: 26,000 kg, tire size: 315/70 R 22.5, axle configuration: 6x2, color: white, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 2, Stream Space 230 cab - Automatic air conditioning - Lower bunk - Cab hot water heater - Functional passenger seat - Air-suspended driver’s comfort seat - Overhead roof compartment - Electrically liftable roof - Active Brake Assist - Attention Assist - Electronic Stability Program (ESP) - Lane keeping system / Lane assist – Cruise control – 630-liter fuel tank - 12-speed gearbox G 211-12/14.93-1.0 - Mercedes PowerShift automated transmission - Enhanced high-performance engine brake - Aquatarder - 315/70R22.5 tires - Unitrans isothermal body with refrigeration unit 960x258 - ATP FRC12/2027 with dual bulkhead - Thermo King UTS-E unit - Rear retractable Dhollandia tail lift 2000 kg Kjdpfx Afezhcw Eedenb

Condition: ready for operation (used), Year of construction: 2008, operating hours: 11,655 h, functionality: fully functional, machine/vehicle number: 11421, COMPLETE CONFIDENTIAL DOCUMENTS SHREDDING & BALLING PLANT Built by: - sorting table - infeed belt conveyor 8000x1000 mm; including infeed belt conveyor - VECOPLAN shredder VAZ1300MK; includes screen according to actual confidential shredding DIN norm - Outfeed combined screw and chain conveyor, conveying to the press baler - press baler IMABE H-80/50 - Dust exhaust & filtering system - Electrical cabinet for fully authomatic operation Includes: - Full internal cabling - Machines revised with new wear parts for the shredder - Dismantled Kedpozhu Atsfx Afdenb - Loading into trucks

Condition: ready for operation (used), Year of construction: 2017, operating hours: 14,429 h, controller manufacturer: AMADA, controller model: AMNC 3i, laser power: 3,500 W, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, overall weight: 7,700 kg, total width: 5,745 mm, total height: 2,271 mm, product length (max.): 2,630 mm, number of axes: 3, This 3-axis AMADA LC2415 Alpha 5 was manufactured in 2017. It features a maximum processing area of 5,040 × 1,550 mm and a powerful 3,500 W CO₂ laser, capable of cutting mild steel and stainless steel up to 10 mm thick. The machine has a maximum simultaneous feed rate of 114 m/min and can handle workpieces weighing up to 330 kg. If you are looking to get high-quality cutting capabilities, consider the AMADA LC2415 Alpha 5 CO₂ laser cutting machine. Contact us for further details. • Control: AMNC 3i • Controlled axes: X, Y, Z (three axes controlled simultaneously) • Maximum processing area: 5,040 × 1,550 mm (with one reposition) Knsdjzzzx Ijpfx Afdjb • Maximum simultaneous feed rate (X/Y): 114 m/min • Repeatable positioning accuracy: ±0.01 mm • Maximum workpiece weight: 330 kg • Processing surface height: 820 mm • Work chute size: 550 × 1,750 mm • Laser resonator: AF3500i-C • Laser type: Fast axial flow, high-frequency discharge excitation CO₂ laser • Wavelength: 10.6 µm • Maximum cutting thickness: • Mild steel: 10 mm • Stainless steel: 10 mm • Aluminum: 8 mm Additional equipment • MP300 Automatic Sheet Loading System

Condition: used, mileage: 1,30,000 km, power: 96 kW (130.52 HP), first registration: 09/2020, fuel type: diesel, overall weight: 3,400 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,825 mm, loading space width: 1,230 mm, loading space height: 1,210 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Docking station (MyFord Dock), vehicle without vinyl floor covering in the loading/passenger compartment, 240 A generator, LED loading compartment light, smoker's package, sliding door in loading/passenger compartment on the left, start/stop system, fleece battery 80 Ah (AGM, 2 batteries) Other equipment: Driver's side airbag, traction control (ASR), audio system: radio with USB and Bluetooth hands-free system, indicator light integrated in the exterior mirror, on-board computer, entry lights, electronic brake force distribution (EBD), electronic. Traction control, driver assistance system: hill start assist, driver assistance system: crosswind assist, lockable glove compartment, rear wing doors without glazing (opening angle 180 degrees), interior filter: pollen filter, body/structure: high-space box, body variant: medium-high roof, high loading space partition behind driver and front passenger, without window with through-loading option below, steering column (steering wheel) adjustable in height/length, truck registration, model update, engine 2.0 liter - 96 kW TDCi KAT, parking pilot system, parking pilot system front and rear, wheelbase 3300 mm, spare wheel in driving tires, low emissions according to Euro 6d-TEMP emission standard, leather gearshift/selector lever handle, windshield wipers with interval switching, adjustable, headlights H4, sliding door loading/passenger compartment on the right, mud flaps front and rear, visibility package 2, seat package 13: driver's seat (4-way adjustable) - passenger double seat, fabric, seat package 25: driver's seat (4-way adjustable) - passenger double seat - in velour, steel rims 6.5x16, bumper partially painted, style color package, daytime running lights LED, trend, tinted glazing, paneling in the loading/FG area: half-high, lashing rails on the side of the loading area, lashing eyes (8), heat-insulating glazing slightly tinted Cooling system: Special equipment: Transcool Multitemperature system With 3-chamber -30C, +22C, +4C Auxiliary cooling 220V Payload: 700 KG Kodpfx Afez D Hinedjnb Vehicle is in good condition!

Condition: ready for operation (used), Year of construction: 2015, operating hours: 29,446 h, clamping force: 2,600 kN, screw diameter: 60 mm, overall weight: 22,300 kg, controller manufacturer: ENGEL, controller model: CC300, product length (max.): 8,780 mm, Electrical injection moulding machine manufactured in 2015. This Engel e-victory 1640/260 features a clamping force of 2600 kN and an injection unit of 1640. It includes a tiebarless clamping system and a servo-electric injection system for high efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel e-victory 1640/260 machine we have for sale. Contact us for further details. • Clamping system: Tiebarless ENGEL clamping system • Injection unit: 1640 • Injection system: Servo-electric, high execution • L/D ratio: 24 • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) • Hydraulics: ECODRIVE SHV1 (1 demand-regulated servo pump) • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 164 kW • Centering: 160 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen • Vacuum/compressed air circuits: 8 on stationary platen with Venturi nozzles and pressure switches • Pneumatic mold valve control: 2-fold FESTO, up to 16 bar • Mold heating: 16 control zones, max heating power 25 kW • Nozzle radius: 15 mm • Nozzle bore: 4 mm • Nozzle contact stroke: approx. 405 mm • Hydraulic tank capacity: Main tank approx. 490 l, suction tank approx. 220 l • Robot interface: Euromap 67 / AN-146 • Languages: Czech and German Additional equipment • MuCell package: • Complete MuCell Basic Package • PM cold-work steel screw Ø 60 mm • Hydraulic needle shut-off nozzle • Melt pressure sensor • Trexel auxiliary equipment: SII VC 30, MIK 1060 SII • Frame for two 50 L gas cylinders Knodpfx Ajz Dgrpsfdob • Mold temperature control: 3 ENGEL flomo distributors (24 monitored circuits total) • GEKU automation with conveyor belts

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 2652-1192652, travel distance X-axis: 4,000 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 40,000 m/min, feed length X-axis: 4,400 mm, feed length Y-axis: 2,400 mm, feed length Z-axis: 250 mm, feed rate X-axis: 4,000 m/min, feed rate Y-axis: 40,000 m/min, controller manufacturer: CNC, workpiece length (max.): 4,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 230 mm, workpiece diameter (max.): 2,000 mm, total length: 7,516 mm, total width: 3,476 mm, table width: 2,450 mm, table length: 4,500 mm, overall weight: 9,280 kg, Equipment: documentation/manual, Good day, we are offering a fully functional 5-axis waterjet cutting machine. The machine also includes a collector for used abrasive material. A 1-year compressor with warranty, 5 tons of abrasive material, and spare parts are included in the price. If you are interested, the machine is available immediately. Ksdpfszgu Akox Afdjnb

Condition: used, Year of construction: 2015, Agie Charmilles Cut 300 SP Wire-Cut EDM. Serial No. 591.063.002.0159 (2015). Country of Origin: Switzerland Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Ksdpfsz Ar Agex Afdjnb Lot 2 of Auction 3505

Condition: used, Year of construction: 2011, The BAADER 600 Meat Separator is a compact, efficient, and reliable machine designed for the gentle separation of soft tissue from harder components such as bone, cartilage, tendons, or skin. Manufactured in Germany in 2014, this model is ideal for food processors looking to maximize yield while maintaining product quality and texture. Knjdpfozx Dx Ssx Afdjb Technical Specifications: Manufacturer: BAADER Type: 600-501 Year: 2011 Mesh size: 3 mm Power rating: 400V / 3Ph / 50Hz / 2.0 hp / 1.5 kW / 4.0 A Wiring diagram: 600.70.00.854 Weight: 290 kg Dimensions: L: 102 cm, H: 123 cm W: 95 cm Country of origin: Germany ✅ Key Features: Gentle product handling – preserves the structure of meat, poultry, or fish High-precision 3 mm mesh – perfect for fine separation Compact and lightweight – easy to install in any production line Low energy consumption – only 1.5 kW Easy to clean and maintain – made from food-grade stainless steel Ideal for fish, poultry, and red meat applications Built with high-quality German engineering for long-term reliability BAADER 600 Meat Separator is a proven solution for processors aiming to improve product recovery, reduce waste, and optimize efficiency in soft tissue separation.

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 15,000 rpm, overall weight: 2,000 kg, spindle motor power: 21,000 W, CNC Portal Vertical Machining Center DEPO Type DEPOCUT 2012 Year of manufacture 2000 Heidenhain TNC 430 Electronic handwheel Table 2300 x 1600 mm Travel distances X / Y / Z 2200 / 1200 / 800 mm Max. table load 12 tons Tool holder SK 40 Tool changer, 12 positions Spindle speeds 30 - 15,000 rpm Minimum quantity lubrication Kjdpfxjzwm A Do Afdonb Spindle drive 21 kW Machine weight 20 tons Weiss spindle overhauled, spindle operating hours since overhaul 1352h Machine is still in operation Dismantling and transport must be carried out by the buyer.

Condition: used, mileage: 3,60,000 km, Year of construction: 2007, Three-axle 6x4 truck, classified as construction equipment, fitted with a Colombo-brand three-way tipper body with hydraulically operated sideboards, tarpaulin cover, manual transmission, and towable. Knedpfjy Tyawex Afdeb Note: Please be advised that the vehicle description is indicative and may contain errors or inaccuracies. We therefore invite you to contact us to verify the accuracy of the data.

Condition: new, functionality: fully functional, Year of construction: 2025, color: grey, overall weight: 800 kg, loading space width: 2,400 mm, loading space length: 4,000 mm, loading space height: 2,600 mm, Equipment: lighting, Container in the picture is in stock and immediately available. Inspection and collection possible. We are offering the Villex Mini Glass Cube Nero 1.0 Container in this listing, which can be used in a variety of ways, such as an office container, showroom, pavilion, or for many other purposes. Dimensions and Specifications Length: 4.0 m Width: 2.4 m Height: 2.6 m Standard Features: Condition: New & Assembled Exterior color: RAL7016 (Anthracite) for panels and base frame Exterior walls: 50mm insulation PUR foam Weight: 800 kg Equipment: Doors: 2x glass doors Windows: 3x glass panels + 1x standard window (1000 x 1000 mm) Electrics: 32A CEE plug (red), 3x double sockets, 2x LED lights & 1x light switch Ksdpfey Egqyjx Afdsnb Optional extra features for an additional charge: Double-wing doors for wider access, ideal for machines and tools Additional doors and windows for better ventilation and light Floor-to-ceiling windows for a modern design and bright interior Roller shutters for window privacy and sun protection Wood-style façade for an elegant wood look and a more homely feel Partition walls for customizable room layouts Sanitary facilities with WC and shower for longer stays Air conditioning with heating and cooling for year-round comfort Forklift pockets for safe transport with forklifts Delivery and Payment: Nationwide delivery within 1-3 weeks. Convenient payment by PayPal, bank transfer, or cash on delivery.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 50 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Z stroke : 150 [mm] - X stroke : 225 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 1.1 [kW] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 5 - X/Y stroke : 97/133 [mm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 6 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1063/2033 [mm] - Machine height : 1666 [mm] - Machine weight : 1700 [kg] Kodpfx Asuha Umsfdenb EQUIPMENT - CNC : CINCOM 18iTB - Coolant tank - Bar loader : IEMCA SMART 320

Condition: used, CITIZEN CINCOM R 07 VI is a high-precision CNC automatic lathe (Swiss-type) delivering strong accuracy and reliability. Capacities: 6 axes, 2 spindles; max turning Ø 7 mm, max length 40 mm, spindle bore 12 mm; threading up to Ø4 M, max tapping length 40 mm. Specs: spindle 0–16,000 rpm, 1.1 kW; back spindle up to 10,000 rpm, 0.5 kW; C-axis resolution 1°; supply 3x400 V 50 Hz, total power 4 kVA; weight ~950 kg; footprint 1465×560×1410 mm. Accessories: parts catcher, lamp, bar feeder LNS TRYTON 107, central lubrication, status light. Built to achieve tight tolerances; typical applications include automotive, watchmaking, medical, aerospace, and machine-tool components Knedpsyxnutefx Afdob

Condition: used, Year of construction: 2000, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller manufacturer: MORI SEIKI, controller model: MSX-502III, table width: 500 mm, table length: 500 mm, overall weight: 14,300 kg, With double pallet, Mori Seiki MSX-502III control system. Excluding workholding fixtures and tooling. PICK-UP BY SEPTEMBER 2026. Knsdpfx Aszxtbpsfdeb

Condition: excellent (used), Year of construction: 2015, Shape float glass cutting line LISEC baseCUT-37/26 + BASE TABLE BREAK With low-e grinding Year of production: 2015 Maximum glass size: 3700 x 2600 mm "4 in 1" - with tilting, cutting, breaking and low-e grinding Includes 2 pcs. free-fall racks LISEC LBS-37/26FF Glass thickness: 2 - 19 mm Knjdpfx Afexlq Nwodob Glass cutting speed: up to 140 m/min In very good and clean condition Good working order, tested Good working order, tested As is Availability immediate