Used Wafios Ufa 10 for sale (29,601)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, spindle speed (max.): 3,500 rpm, travel distance X-axis: 271 mm, travel distance Y-axis: 600 mm, center width: 600 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Turning diameter over bed: 350 mm Distance between centers: 600 mm Bed width: 210 mm Travel in X-axis: 271 mm Travel in Y-axis: 600 mm Spindle bore: 62 mm Maximum spindle speed: 3,500 rpm Klodpfx Aezdd Npopdou MACHINE DETAILS Control system manufacturer: Siemens Power: 30.0 kW Dimensions & Weight Dimensions (L x W x H): 4,300 x 2,100 x 2,100 mm Net weight: 5,000 kg EQUIPMENT Chip conveyor Three-jaw chuck Bar feeder Driven tools C-axis Note: The parameters are stored, but are lost if the power supply is interrupted. As long as the power supply is maintained, this is not a problem.

Condition: used, Max. turning diameter: 650 mm Min. turning diameter: 200 mm Max. turning length: 4000 mm Max. workpiece weight: 10 tons Center height: 400 mm Faceplate diameter: 650 mm Speed: 1 - 58.4 rpm Drive power: 45 HP Kljdpfxjvk T S Aj Apdju Tailstock

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, We offer these ready-to-use AUMA actuators and JC Spain gate valves, 10" to 42" gate valves with actuators, model "Valves for Oil Industry," year of manufacture 2016. High-performance gate valves Sizes: 10" to 42" Pressure class: 600 lbs, Stellite 6 hardfacing and 13% Cr trim (internal parts) BWE (butt-weld ends), wedge type gate valve, bolted bonnet, OS&Y ASTM A-216 WCB (cast carbon steel) The majority of units are equipped with explosion-proof, intelligent AUMA AUMATIC ExC actuators. Optionally, we can refurbish the actuators and gate valves and provide a factory acceptance test (FAT). Actuator manufacturer: AUMA Riester GmbH & Co. KG Klodey D Ilijpfx Apdsu Model: 10" to 42" gate valves with actuator - 42" gate valves (2 units): equipped with AUMA SAEX 30.1 actuators. - 32" gate valve (1 unit): equipped with AUMA SAEX 16.2 / ACEXC 01.2 / GK40.2. - 30" gate valves (4 units): equipped with AUMA SAEX 16.2 / ACEXC 01.2 / GK40.2. - 30" gate valves (2 units): handwheel (can be fitted with actuators). - 16" gate valves (9 units): equipped with AUMA SAEX 14.6/GK30.2 Germany actuators (Ex-proof). - 10" gate valve (1 unit): handwheel Location: Ras al Khaimah, UAE If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1985, I sell hydraulic press MÜLLER HEP 10.20.35, year of production 1985. the press worked until the very end in bdb condition. Review of the press in 2023. Kljdpjudph Ijfx Apdju

Condition: new, neu ca. 8 Wochen ab Auftragse Klodpfsynmzcsx Apdou Türkei 7300 € 140.89 € 10 to 185 mm 150x8 mm 450x900 mm 150 mm 60 mm 10 mm/s 10 mm/s 1.1 kW 915 mm 900 mm 450 mm 1130 mm 250 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: new, Year of construction: 2026, neu 2026 070223 September 2026, Zwischenv Türkei 20100 € 385.92 € 10 to 1.4 mm 270 mm 370 mm 100 mm 1 - 40 mm 200 1/min 4 35 mm 25 mm 160 mm 180 mm 0.75 kW 1170 mm 1180 mm 1700 mm 590 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages Kodpfx Aowirqgspdelu * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations OPTIONS: vibrations pads € 132,- bolster plate € 220,- Symbolic photos, picture incl. optional available bolster plate

Condition: used, empty load weight: 8,100 kg, maximum load weight: 27,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 01/2027, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, truck registration, | Knapen K100/KT01 Walking Floor Trailer | Remote Control | 10 mm Floor | Roll-over Cover, Standing Platform | BPW axles with disc brakes | 1-axle lift | Toolbox | Spare wheel holder | Tare weight: 8100 kg | Austrian vehicle, valid inspection certificate until 01/27 | Errors, input errors and prior sale are subject to change. Klsdjzfm T Sjpfx Apdou

Condition: new, sheet thickness: 10sheet length: 3200Combo Package: CNC Press Brake & Swing Beam ShearFor precise, efficient, and safe sheet metal processing We offer you a powerful complete package consisting of a CNC Press Brake (160t / 3200 mm) and a Swing Beam Shear (10 mm / 3200 mm) – perfectly matched for modern metalworking with high precision and productivity. CNC Press Brake – 160 Tons / 3,200 mmWith 4 CNC axes (Y1, Y2, X, R) & CNC-controlled crowning Standard Equipment:Heavy-duty design for precision bending and long service life CNC axes: Y1, Y2, X, and R – for accurate positioning and repeatability Motorized CNC-controlled crowning system for automatic angle correction ZY 68 CNC controller (similar to Delem) – user-friendly and highly flexible Backgauge with linear guides and ballscrew, equipped with 4 fingers 2 front sheet support arms for ergonomic handling Laser safety guard on the upper beam for operator protection Quick-clamp system for upper tools Tooling system: Promecam/Amada, segmented and gooseneck for flexibility Multi-V die system – compatible with Promecam and Amada CE-compliant safety equipment Swing Beam Shear SWC 3200 x 10 mmWith NC control and motorized backgauge Technical Specifications:Sheet thickness: up to 10 mm, cutting length: 3,200 mm Cutting angle: 1.30°, Motor power: 15 kW Motorized backgauge: up to 1,000 mm Dimensions: L 3,800 × W 1,820 × H 1,920 mm Weight: 7,700 kg Equipment:Swing beam design for clean and accurate cuts NC control ELGO P40 T, with front-side operation including blade gap adjustment Hydraulic hold-downs positioned close to the cutting line User-friendly control panel on a swivel arm Foot pedal, blade gap adjustment & cutting line illumination Wide sheet support table with ball transfers, 2 front support arms with T-slot Flip-up finger guard, 1 side gauge with T-slot Upper blade reversible 2 times / Lower blade reversible 4 times Adjustable cutting length for efficient operation Qualified customer support, operating manual in English Kodpfjzdwfiox Apdolu Machine and equipment comply with CE regulations Your Benefit – All-in-One Solution:Perfectly matched machines Time and cost savings through combined package Ideal for workshops, metal fabricators, and job shops Contact us now for a non-binding offer!

Condition: new, sheet thickness: 10sheet length: 3200Combo Package: CNC Press Brake & Swing Beam ShearFor precise, efficient, and safe sheet metal processing We offer you a powerful complete package consisting of a CNC Press Brake (160t / 3200 mm) and a Swing Beam Shear (10 mm / 3200 mm) – perfectly matched for modern metalworking with high precision and productivity. CNC Press Brake – 160 Tons / 3,200 mmWith 4 CNC axes (Y1, Y2, X, R) & CNC-controlled crowning Standard Equipment:Heavy-duty design for precision bending and long service life CNC axes: Y1, Y2, X, and R – for accurate positioning and repeatability Motorized CNC-controlled crowning system for automatic angle correction ZY 68 CNC controller (similar to Delem) – user-friendly and highly flexible Backgauge with linear guides and ballscrew, equipped with 4 fingers 2 front sheet support arms for ergonomic handling Laser safety guard on the upper beam for operator protection Quick-clamp system for upper tools Tooling system: Promecam/Amada, segmented and gooseneck for flexibility Multi-V die system – compatible with Promecam and Amada CE-compliant safety equipment Swing Beam Shear SWC 3200 x 10 mmWith NC control and motorized backgauge Technical Specifications:Sheet thickness: up to 10 mm, cutting length: 3,200 mm Cutting angle: 1.30°, Motor power: 15 kW Motorized backgauge: up to 1,000 mm Dimensions: L 3,800 × W 1,820 × H 1,920 mm Weight: 7,700 kg Equipment:Swing beam design for clean and accurate cuts NC control ELGO P40 T, with front-side operation including blade gap adjustment Hydraulic hold-downs positioned close to the cutting line User-friendly control panel on a swivel arm Foot pedal, blade gap adjustment & cutting line illumination Wide sheet support table with ball transfers, 2 front support arms with T-slot Flip-up finger guard, 1 side gauge with T-slot Kljdpfjwnz Apsx Apdju Upper blade reversible 2 times / Lower blade reversible 4 times Adjustable cutting length for efficient operation Qualified customer support, operating manual in English Machine and equipment comply with CE regulations Your Benefit – All-in-One Solution:Perfectly matched machines Time and cost savings through combined package Ideal for workshops, metal fabricators, and job shops Contact us now for a non-binding offer!

Condition: used, empty load weight: 8,020 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2023, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, truck registration, | Knapen K100/KT01 Walking Floor | Remote control | Roll-up tarpaulin, operator platform | BPW axles with disc brakes | 1 lifting axle | Tool box | Tare weight: 8,020 kg | Valid inspection report/TÜV until 09/26 | Errors, typos and prior sale excepted. Kljdpfx Apjzd Hypjdou

Condition: new, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 10,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 940 mm, 20 lashing rings each rated at 6 t, 20 lashing brackets each rated at 6 t, 18 lashing holes, 7 central stake pockets, 14 stake pockets in the outer frame, 2 pairs of container locks, surcharge for front wall approx. 1,600 mm high, removable Price: €1,500, surcharge for extendable drawbar Price: €1,500, surcharge for 4 warning signs with lighting Price: €800. Also available with loading platform lengths of 8,600 mm, 9,000 mm, or 10,500 mm! -- Subject to misprints, errors, and changes, sample images -- For more data, see: !, More details: ! Klodpfxozfy Ics Apdeu

Condition: used, maximum load weight: 34,120 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,737 mm, loading space volume: 88 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, 3-axle STAS Walking Floor Semi-Trailer, 88 cbm First registration 07/2024, from first owner Mileage only 69,324 km Internal dimensions (L x W x H) 13,513 x 2,475 x 2,536 / 2,752 mm >>> Saddle height 1,200 to 1,250 mm Axle distance 1,310 mm Unladen weight 7,880 kg Chassis made of steel, hot-dip galvanized SAF axles with large disc brakes, 430 mm, reinforced "CD" version WABCO Trailer EBS with anti-roll system RSS WABCO Smartboard with axle load indicator >>> 1st and 3rd axles are lift axles >>> WABCO OptiTurn steering system to reduce the turning radius Air tank made of aluminum Tire size 6x 385/65 R 22.5 Crank-operated saddle JOST full-load Lighting ASPÖCK full LED 4 x LED work lights Toolbox on the rear left Side walls with profile overlaps, completely welded on the inside CARGOFLOOR sliding floor with 21 planks, material thickness 10 mm, ribbed Kedpjy S Nqcefx Apdelu >>> with floor reinforcement for forklifts and full load, sliding bearings Control with WIRELESS REMOTE CONTROL End plate at the rear made of stainless steel Side rails 2 pieces, reinforced waste disposal version Roof tarpaulin, reinforced version >>> Rear crossbar swivels, can be operated from the ground with grain slide in the left door leaf RENTING is the new BUYING, and it is immediately available with us, even in FULL-SERVICE LEASING.

Condition: new, neu Bulgarien Ksdjyq Sn Tepfx Apdelu 89440 € 1690.42 € 760 mm 3000 mm 380 mm 132 mm 520 mm 560 mm 11 140 MK 3 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.500 mm € 75340,00 turning length2.000 mm € 78380,00 turning length4.000 mm € 95860,00 turning length5.000 mm € 108730,00 turning length6.000 mm € 122800,00

Condition: new, neu Bulgarien 96240 € .94 € 860 mm 3000 mm 430 mm 135 mm 620 mm 560 mm 11 140 MK 7 - 42; 28 - 170; 165 - 1 U/Min Klodpfeyq Sm Aox Apdeu 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4650 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 82140,00 turning length2.000 mm € 85080,00 turning length4.000 mm € 102660,00 turning length5.000 mm € 115430,00 turning length6.000 mm € 129500,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 113620 € 2147.42 € 800 mm 2000 mm 400 mm 260 mm 560 mm 560 mm 318 MK 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 Klodpswirghjfx Apdeu 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6000 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 120-350 mm. Option: hard top jaws with gripping range 120-500 mm 2 pcs. steady rests on supports Dm. 60 - 260 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 86980 € 1643.92 € 860 mm 3000 mm 430 mm 132 mm 620 mm 560 mm 11 140 MK 17 7,5 - 1015 1/min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 - 2/3 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 3470 mm 1700 mm 1730 mm 4650 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 72870,00 turning length2.000 mm € 75900,00 turning length4.000 mm € 93390,00 Kledpfewiq Rxex Apdou turning length5.000 mm € 106 160,00 turning length6.000 mm € 120230,00

Condition: new, neu Bulgarien 81780 € 15.64 € 760 mm 3000 mm 380 mm 132 mm 520 mm 560 mm Klodowiq Rrspfx Apdou 11 140 MK 17 7,5 - 1015 1/min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 67770,00 turning length2.000 mm € 70700,00 turning length4.000 mm € 88290,00 turning length5.000 mm € 101060,00 turning length6.000 mm € 115130,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 113720 € 2149.31 € 800 mm 2000 mm 400 mm 3 mm Kjdpfx Aewiq E Aepdjlu 560 mm 560 mm 318 MK 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6100 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 250-380 mm. Option: hard top jaws with gripping range 250-500 mm 2 pcs. steady rests on supports Dm. 120 - 320 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 138800 € 2623.32 € 1020 mm 2000 mm 510 mm 358 mm 770 mm 560 mm 361 MK 12 6,3 - 3 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 505 mm Ksdpfx Apewiq Drjdslu 270 mm 105 mm 6 MK 225 mm 18.5 kW 6400 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type D1, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 660 mm on both sides of the spindle, max. 250 rpm,gripping range 5-400 mm. Option: hard top special jaws (outside only), gripping range 80-400 mm 2 pcs. steady rests on supports Dm. 160 - 360 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Year of construction: 1979, condition: used, Dimeter range- 3-10mm Cutting lenght -4m ,(possibly longer) Speed -90 m/min. Kledpfxscv A I Ne Apdsu Reconstruction- 2016 Control - PLC

Condition: excellent (used), Year of construction: 1989, x-travel 1500 mm y-travel 1000 mm Kledpfxeu Id N Ds Apdsu z-travel 700 mm table: 1500 x 1000 mm control FIDIA weight of the machine ca. 11 t

Condition: good (used), Code: 0417 Brand: PEGIC - ITALY Model: DIAMANT 10 - CE Standard Kljdpfx Aszfp Avopdju Water-cooled sharpening machine and grinder with base for sharpening tools, chisels, drill bits and various tools – CE Standard Technical data: Water-cooled grinding wheel: Wheel diameter 250 mm Hole 25 – Rpm 400 Grinder: Grinding wheel diameter 150 mm Hole 16 – Rpm 2800 Three-phase motor 0,75 Kw Overall dimensions mm 700 x 450 x 1100 h Weight kg 6

Condition: new, sheet thickness: 1.8upper roll diameter: 70messurements (LxWxH): 1650 x 700 x 1160prebending: 1.5motor: 1,1sheet length: 1050 Technical specifications: Kodpsd Ab T Rofx Apdolu - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover EURO 274,-- - Hardened rolls EURO 392,-- - Variable speed of Rotation We have many references!

Condition: good (used), Tires, solid rubber tires, forklift tires Ksdpfx Aozfvu Eepdjlu -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 2 pieces -Tire size: 18 x 7 - 8 SC 10 RIM 4.33 R -Bolt circle: Ø 140 x 18 mm -Hub bore: Ø 111 mm -Price/Fee: complete -Dimensions: Ø 445 x 155 mm -Weight: 25 kg/piece

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 2 pieces -Tire size: 18 x 7 - 8 SC 10 RIM 4.33 R -Bolt circle: Ø 140 x 18 mm Kjdpszfvuxjfx Apdjlu -Hub bore: Ø 111 mm -Price/Fee: complete -Dimensions: Ø 445 x 155 mm -Weight: 25 kg/piece