Used Warmbier Safety Pips 7100.181 for sale (11,107)

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Very well-maintained and robust OTT heating plate press, type ST 2511/80, with a pressing force of 80 tons. The press is ideally suited for gluing and veneering panels, furniture components, and other wood-based materials. The machine is in very good used condition. Technical data: Manufacturer: Paul OTT Type: ST 2511/80 Year of manufacture: 1987 Machine no.: A 6815 Pressing area: approx. 2,500 × 1,100 mm Pressing force: 80 t Specific pressing pressure: approx. 2.9 kg/cm² Total power: 15.6 kW Rated voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 24 A Heated press plates Temperature display for upper and lower heating plates Pressure and pressing time setting Safety tripwires Condition: very good Equipment: Upper and lower heating plates Hydraulic pressing device Adjustable pressing pressure Adjustable pressing time Temperature monitoring Safety tripwires Transport possible for an extra charge! The machine is currently still at the customer's site but would be immediately available! Guedszxzbdepfx Akajg The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2021, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 2021-1504-QN, High-end metal separator for inspecting bulk materials in free fall Material: stainless steel 304 Surface: sandblasted Guedezvwlmjpfx Akaog Sensing tube material: PE, anti-static, food grade Rejector: single flap type RH Protection rating: IP66 Electronics assembly: detached Control electronics cable length: 3 m Nominal width: 150 mm Orientation: vertical, top to bottom Power supply: 100-240VAC 50-60Hz LNPE - Without power cable Pressurized air supply: 6-10 bar Expected sensitivity: FE: 0.4 mm NE / Al: approx. 0.4 to 0.56 mm Stainless steel: approx. 0.4 to 0.72 mm Electronics outside ATEX Zone Inside: Zone 20 within metal separator (pipe) = II 1 D Ex h IIIC T135°C Da Outside: Zone 22 surrounding metal separator = II 3 D Ex tc IIIC T135°C Dc IP65 QUICKTRON 07 RH metal separators are used for inspecting powders and granules in free-fall lines. They are available in nominal widths up to 300 mm and can therefore cover all application areas, from the laboratory to truck loading. Their hygienic design and easy cleaning prevent cross-contamination between product batches. Depending on the requirements, they can increase process safety or fulfill the task of outgoing goods inspection. Mesutronic metal detectors use state-of-the-art technology to protect your production, your reputation, and your customers from damage caused by metallic foreign objects. Digital signal processing, combined with innovative evaluation methods, comprehensive self-monitoring, and ease of operation, ensure the optimal function of the system and the successful completion of all types of audits. The devices are complemented by an extensive range of accessories and variants, from multi-frequency technologies to test bodies and material certificates. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or in the production plant in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: 125102018, Manufacturer: TMA Automation sp. z o.o., Year of production: 2018 SET DESCRIPTION For sale is a complete set of two cooperating Cartesian robots manufactured by the Polish company TMA Automation, designed for use with injection molding machines. The set consists of a MIDI LINE linear robot and a UNI LINE in-mold labeling (IML) module. The robots were used in a production facility and are in a condition confirmed by technical documentation. The sale includes complete documentation. TECHNICAL DATA Gusdpfx Aezwdx Nekajg MIDI LINE robot (serial number: 125102018) Dimensions (L x W x H) 2400 x 2060 x 1435 mm (variable height), Weight 600 kg, Payload 8 kg, Z-axis reach 2300 mm, Y-axis reach 1400 mm, X-axis reach 1400 mm, Supply voltage 400 V / 50 Hz, Power 4.5 kW, Operating air pressure 6.5 bar UNI LINE robot with IML module (serial number: 126102018) Dimensions (L x W x H) 2540 x 1000 (1370) x 2090 mm, Weight 550 kg, Payload 8 kg, Stacker reach 1100 mm, Supply voltage 400 V / 50 Hz, Power 1.5 kW, Operating air pressure 6.5 bar EQUIPMENT INCLUDED Touchscreen control panel with a safety STOP button (e-stop), control software with the following functions: automatic mode, manual mode, no-label mode, no-part removal mode, program archive, graph and alarm module; complete technical documentation, CE marking on both machines. TECHNICAL CONDITION Robots from 2018, operated in industrial conditions (plastics injection molding). Control panel active; at the time of the photographs, program PRG 2 was selected, operating speeds: manual 22%, automatic 17%. The photographs show a red robot stop signal (standby condition, not an emergency). Recommended before purchase: personal inspection and test run at the installation site. SALES CONDITIONS Sold only as a set. Self-collection only. Transportation is the buyer's responsibility.

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, CNC control HEIDENHAIN TNC 640, 15" Main computer MC Controller unit CC Keyboard TE 15" TFT color flat screen with softkeys RAM: 4 GB Hard disk: 32 GB, of which at least 21 GB program memory Input resolution / display increment linear axes: up to 0.1 µm Input resolution / display increment rotary axes: up to 0.0001° Input range: max. 99,999.9999 mm or 99,999.9999° Circular interpolation in 3 axes with tilted machining plane Helical interpolation Linear interpolation in 5 axes Block processing time: 0.5 ms Ethernet: 2 x 1000BaseT USB: 1 x front USB 2.0, 4 x rear USB 3.0 Handwheel HEIDENHAIN HR510 Axis selection via buttons / softkeys Buttons for continuous axis movement Emergency stop button Magnetic attachment Enable buttons / dead man's buttons according to CE Travel ranges X-axis / longitudinal axis: 4,000 mm Y-axis / transverse axis: 2,500 mm Z-axis / vertical axis: 1,300 mm Feed / connection / pneumatics Max. feed rate interpolating axes: 40 m/min Installed power: 60 kVA Max. power consumption: 150 A Air requirement pneumatics: 400 Nl/min Working pressure pneumatics: 6 bar Machine table / floor plate Machine table recessed, with leveling units Table size: 2,500 x 4,000 mm Table height: 300 mm Load capacity: 10 t/m² T-slot width: 28 H12 mm T-slot spacing: 250 mm Milling head / universal milling head Universal milling head with continuous movement in 2 axes 5-axis machining Direct drives for rotary axes Rotary axes as interpolated CNC axes Automatic tool clamping Undercut machining up to 10° possible Integrated cooling of the torque motors and spindle bearings C-axis swivel range: +/- 270° A-axis swivel range: +/- 185° Max. speed A/C axes: 30 rpm Working torque A/C axes: 450 Nm Clamping torque axes: 1,400 Nm Positioning accuracy A/C axes: 8 arcsec Positioning repeatability A/C axes: 4 arcsec Main spindle Spindle power S1 / S6: 22 / 33 kW Spindle torque S1 / S6: 84 / 128 Nm Max. spindle speed: 18,000 rpm Constant power: 2,500 - 18,000 rpm Constant torque: 10 - 2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping for electric spindle Software / calibration Dynamic RTCP software AUTOCAL software for automatic calibration 3D Form Inspect M&H software Software for measuring 3D shapes, tools, molds and dies Measurement program creation directly via coordinate points / surface points Vibration / collision monitoring Sensor for detecting vibrations Detection of collisions and excessive vibrations on 3 axes Reaction time approx. 1 ms Electronic interface for functional testing Tool changer Tool changer with arm for tool changes Overlapped-wheel design Full enclosure for operator safety Tool positions: 80 Max. tool diameter: 75 mm Max. tool diameter with free adjacent positions: 125 mm Gujdpfxjyrndmj Akaog Max. tool weight: 10 kg Max. tool length: 600 mm for 40 tools Max. tool length: 250 mm for 40 tools Tool type: HSK-A63 DIN 69893

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 180248, compressed air connection: 6 bar, input voltage: 230 V, total width: 950 mm, total length: 1,500 mm, type of input current: AC, overall weight: 250 kg, air demand: 10.2 m³/h, input current: 1 A, pneumatic connection: 6 bar, Eickmeyer TIC PRL4M-IP – 4-colour pad printing machine – demonstration model Professional 4-colour pad printing machine Eickmeyer TIC PRL4M-IP. Year of manufacture: 2018 Serial number: 180248 The machine was purchased by us directly from Eickmeyer in Germany in 2021 as a demonstration model. Since the purchase, it has been used only to a very limited extent in our production, as we operate other pad printing machines. The machine is fully functional and in very good condition. Technical specifications: 4-colour pad printing machine floor-standing model electro-pneumatic control microprocessor control with display closed ink system 4 × ink cups Ø 90 mm with ceramic doctor rings cliché size: 4 × 100 × 250 mm servo-controlled sliding table sliding table height-adjustable via spindle additional individually controlled cylinders for each printing pad suitable for multicolour printing on larger or longer objects pad pressure: 168 kg at 6 bar compressed air supply: 6 bar power supply: 230 V / 50 Hz safety guards emergency stop two-hand operation CE marked The machine is offered in the same configuration in which it was purchased from Eickmeyer. Purchase price from Eickmeyer in 2021: EUR 16,500 net. The original purchase invoice is available. The machine can be inspected and tested in operation by appointment. Location: Slovakia, Banská Bystrica region. Transport within Slovakia, Czech Republic and Hungary can be arranged by us. Transport to other EU countries can also be organised upon request. Guodpfozvgt Hex Akaog Price: EUR 9,900 net, EXW Slovakia (Incoterms® 2020). Transport can be arranged upon request at additional cost. Reasonable offers are welcome.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 11/2022, total length: 2,750 mm, total width: 1,650 mm, total height: 1,800 mm, overall weight: 750 kg, Equipment: documentation/manual, Automatic CNC machine for UV screen printing – SD2-C4-UV (2022) MACHINE OFFERED: The SD2-C4-UV is an automatic, four-color CNC machine designed for screen printing. The machine performs multi-color printing on flat and three-dimensional (round) products, using UV and IR-cured inks in a single production cycle. The machine allows printing on three-dimensional objects in up to six colors, combining UV and IR technologies. It is intended for printing components made of non-flammable materials and plastics, provided that the temperature of the surfaces of the printed components is controlled. We offer for sale a fully functional, automatic CNC machine for UV screen printing, model SD2-C4-UV, manufactured in 2022 (serial no. 11/2022). The machine operates reliably; the sale is due to a change in the production profile. BASIC DATA • Model: SD2-C4-UV • Serial number: 11/2022 • Year of manufacture: 2022 • Condition: used, technically sound Godpfxozwdv Uo Akajug • Cycle counter: 381,124 • Documentation: complete operating manual (120 pages) TECHNICAL PARAMETERS • Power supply: 3 × 400 VAC / 50 Hz / max. power 10 kW • Dimensions: 2750 × 1650 × 1800 mm; weight ~750 kg • Operating pressure: 6.0 bar (max. 7.0 bar) • Printing of round objects: diameter 10–150 mm, height up to 250 mm • Printing of flat objects: up to 250 × 100 × 100 mm • Max. printing area: 310 × 180 mm (1 color) • Operation: 1 operator MAIN ADVANTAGES • 4-color UV and IR screen printing in a single cycle (up to 6 colors) • 9 CNC servo drives – full automation of movement • Printing on round (diameter 10–150 mm) and flat objects • Vision system (camera + monitor) for precise screen alignment • Remote service via the Internet; software update • PLC controller with a touch HMI, menu in Polish • Complete safety systems according to CE standards (opto-electronic barriers, foot pedal) • UV reactor with a 200 mm lamp / ~250 W/cm

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 88-MK6 with Sepro Industrial Robot Succes 7 / Hybrid Machine Year of manufacture: 2021 Injection unit: Screw diameter: 41 mm Shot weight: 246 g Injection pressure: 1890 bar Dosing volume: 271 ccm Clamping unit: Clamping force: 128 t Tie bar spacing: 410x410 mm Platen size: 620x605 mm Ejector: electric Gujdpozy Iaisfx Akaeg Clamping unit: toggle Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor with inverter drive - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Robot Samfacc Year of manufacture: 2022 4-axis robot: 3 axes are driven with servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 4000 kg Length/Width/Height: 4.90x1.30x1.80 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: used, mileage: 2,97,305 km, power: 220 kW (299.12 HP), first registration: 07/2020, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 40 m³, loading space length: 7,400 mm, loading space width: 2,460 mm, loading space height: 2,190 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, M-Benz Atego 1630 beverage box truck with Bär loading platform VIN: 448080 Chassis / Components: * Wheelbase: 5,360 mm * Leaf/Air suspension * Tires: 305/70 R19.5 * Remaining tread depth: 1st tire: 40-50%, 2nd tire: 60% * Diesel tank * AD-Blue tank (plastic) * Two-line system * ABS / 15-pole * 2x fire extinguisher holders Cab: * Classic Space S * 2 seats * Spoiler * Air conditioning * Radio Gsdpfx Aksz Al Tfsaeug * Bluetooth, AUX * Hands-free system * Cruise control * Tachograph 4.1 DTCO * Reversing camera Body: * Zikun Fahrzeugbau beverage box truck * Bär BC1500 S4B4 * Max. 1,500 kg * Support legs on both sides * 2x cargo securing bars per side * 4x cargo securing bars at the top and bottom * 4x cargo securing beams * Swivel wall on both sides * Loading area dimensions L x W x H: 7.40 m x 2.46 m x 2.20 m * Volume: approx. 40 m³ Engine / Transmission: * 300 hp / 220 kW // 7,698 cm³ // Euro 6d * Engine brake * Automatic transmission Weights: * Gross vehicle weight: 16,000 kg * Unladen weight: 8,350 kg * Payload: 7,650 kg Other: * German vehicle * 1 previous owner * New MOT (technical inspection) possible upon request ---- New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, transport of your purchased vehicles within Germany is possible. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing and typographical errors, changes, prior sale, and mistakes; subject to change! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in buying or selling vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly help you load your purchased vehicles. Organization of special transports We will gladly help you organize special transports. Daytime license plates / export license plates We will gladly help you obtain export/short-term license plates. Handling of customs formalities We will gladly help you handle customs matters.

Condition: used, mileage: 2,97,305 km, power: 220 kW (299.12 HP), first registration: 07/2020, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 40 m³, loading space length: 7,400 mm, loading space width: 2,460 mm, loading space height: 2,190 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, M-Benz Atego 1630 beverage box truck with Bär loading platform VIN: 448080 Chassis / Components: * Wheelbase: 5,360 mm * Leaf/Air suspension * Tires: 305/70 R19.5 * Remaining tread depth: 1st tire ~40-50%, 2nd tire 60% * Diesel tank * AD-Blue tank, plastic * Two-line brake system * ABS / 15-pin connector * 2x Fire extinguisher bracket Cab: * Classic Space S * 2 seats * Spoiler * Air conditioning * Radio * Bluetooth, AUX * Hands-free system * Cruise control * Tachograph 4.1 DTCO * Rear view camera Body: * Zikun Fahrzeugbau beverage box * Bär BC1500 S4B4 * Max. 1,500 kg load capacity * Support legs on both sides * 2x Load securing bar per side * 4x Load securing bar on top and bottom * 4x Load securing beam * Swivel wall on both sides * Loading area dimensions L x W x H: 7.40m x 2.46 m x 2.20 m * Volume: approx. 40 m³ Engine / Transmission: 300 hp / 220 kW // 7,698 cm³ // Euro 6d * Engine brake Godpez Al S Uofx Akaeug * Automatic transmission Weights: * Gross vehicle weight: 16,000 kg * Tare weight: 8,350 kg * Payload: 7,650 kg Other: * German vehicle * 1 previous owner * New technical inspection (TÜV) available upon request ---- New technical inspections / safety checks or weight reductions/increases are available upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for printing & typographical errors, changes, prior sale, and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl on the Rhine. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide range of vehicles can be found on an area of 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in buying or selling vehicles. See for yourself! Our services for you: Loading of vehicles We will gladly help you with the loading of your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day license plates / Export license plates We will gladly help you obtain export/short-term license plates. Handling of customs formalities We will gladly help you with the handling of customs matters.

Condition: used, mileage: 8,72,000 km, power: 290 kW (394.29 HP), first registration: 10/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Mercedes Actros 1840 4x2 semi-trailer tractor * Euro 6c emission standard * Long-haul cab with 1 bunk * ACC adaptive cruise control * Lane keeping assist * Blind spot monitoring system * Differential lock * Leaf spring suspension with air suspension * Automatic climate control * Auxiliary heater * Heated seats * Power take-off (PTO) * Radio/CD player * Navigation system Guedpfxszwbcrj Akaeg * Xenon headlights * Alcoa aluminum wheels * EFH (likely an abbreviation for a specific feature or equipment – further context needed for accurate translation) * First owner * ADR FL/AT (compliant with ADR regulations for the transport of dangerous goods, category FL/AT) * Unladen weight 6819 kg * Available in multiple units

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, controller manufacturer: KIMLA, laser type: fiber laser, laser source manufacturer: IPG, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 12 mm, table length: 3,100 mm, table width: 1,600 mm, working length: 3,100 mm, working width: 1,600 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 120 mm, cutting speed: 10,800 mm/min, type of cooling: water, overall weight: 10,000 kg, total length: 8,200 mm, total width: 2,800 mm, total height: 2,400 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, * Dual automatic shuttle tables ensure continuous operation: while cutting on one pallet, the operator can load or unload the other. * Beam-shaping module for adjusting the laser beam profile. * The optical delivery fibre includes a safety circuit preventing operation with a damaged fibre or connector. * Automatic oxygen/nitrogen assist gas distribution with pressure control, low-pressure protection and real-time adjustment. * Compressed-air cutting capability. * Automatic cutting head height control with collision protection and nozzle height calibration. * Automatic sheet position detection aligns the toolpath with the sheet and supports automated loading. * X- and Y-axis linear motors with a 20 kHz control loop provide high dynamics on complex contours. * Dual-sided linear motor gantry drive enables high acceleration without loss of geometric accuracy. * Renishaw absolute position measurement ensures precise positioning, straight cut edges and gantry skew correction. Guedpfx Akezu Nm Hsajg * Monolithic, FEM-optimised frame with composite-concrete-filled chambers; no special foundations or anchoring required. * Linear guide and actuator mounting surfaces are machined in a single setup for high rigidity and accuracy. * Automatically locked front doors with laser-protection windows and protective glazing. * Integrated cooling unit with digital temperature stabilisation. * Steel slat-bed pallets with precision mechanical locking. * Servo-controlled chain-driven pallet changer; table changeover speed: 1 m/s. * Automatic diagnostics, diagnostic reports and free remote internet diagnostics after warranty. * Common DC Bus technology recovers braking energy and reduces power consumption. * Integrated CAD, CAM, CNC nesting and control software with DXF/DWG editing, process selection and toolpath generation. * Software can be installed on additional workstations for offline cutting-plan preparation. * Ethernet connectivity enables integration with IT and production systems. * Parts, sheets and reusable remnants libraries support nesting on partially used sheets. * Project-specific process parameters can be adjusted without changing subsystem settings. * Automatic trim-cut generation for partially used sheets. * Multifunction control panel with keyboard, mouse, USB and gas-pressure controls. * Patented Dynamic Vector Analysis with real-time Ethernet drive communication. * Zoned fume extraction, pulse-cleaned dust collector and laser safety barriers around the pallet exchange area. * PC-CAM imports DXF/DWG files and automatically generates G-code, allowing job preparation at the machine. * Dynamic Vector Analysis maintains high speed on complex contours and shortens cutting times. * High-power-density linear motors provide high acceleration and dynamics. * The compact monolithic frame is welded and machined in a single setup for high rigidity and geometric accuracy. * The electrical cabinet is mounted above the machine, reducing its footprint. Side doors provide easy access to the cutting table.

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 208-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 52 mm Shot weight: 502 g Injection pressure: 1893 bar Dosing volume: 552 ccm Clamping unit: Clamping force: 208 t Tie bar spacing: 530x530 mm Platen size: 790x765 mm Gusdpfx Akezy Iztoaog Ejector: electric Clamping unit: toggle Control system: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine has been serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt available at an additional cost Dimensions: Weight: 6800 kg Length/Width/Height: 6.10x1.50x2.00 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Condition: good (used), Year of construction: 2023, operating hours: 972 h, machine/vehicle number: 0223, Offer 26174 Technical data: - Bending capacity - Pipe at 45 kg / mm² Ø 6 - 48 mm - Wall thickness up to 3.25 mm - Max. bending radius 180 mm - Bending speed 20 °/sec. - Drive 400 V / 2.4 kW - Space requirement approx. W 6200 x H 1200 x D 1000 mm - Weight approx. 1100 kg - Operating hours recorded 972 h - with - Digital bending angle display + fine adjustment of bending angle - with SIEMENS SIMATEC control panel with touch screen - Mandrel bending unit 4.5 m with hydraulic retraction - Saw unit - Deburring unit for internal and external deburring - Pipe positioning system - Bending tools without mandrels Gjdpfxozh Elxj Akaoug - 6, 8, 10, 12, 16, 20, 22, 28, 30 mm - Partially, possibly incomplete

Condition: used, Year of construction: 2022, total height: 2,400 mm, total length: 5,300 mm, total width: 2,350 mm, Colour: Grey Empty weight: 4.000 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. Gsdpozwul Hjfx Akasug These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30B.11.040.22 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: WoodFlash - Safety feature: Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: PICCHIO 2200 - └ Year of manufacture: 2022 - Tools included: Yes - CNC options: Manual control - CNC documentation available: User keys/licenses, USB stick - Table length [mm]: 3300 - Table width [mm]: 1280 - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 - Voltage [V]: 400 - Current consumption [A]: 40 - Power [kW]: 18.0 - Installed length [mm]: 6250 - Installed width [mm]: 3494 - Installed height [mm]: 2300 - Transport dimensions: 5300mm x 2350mm x 2400mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Coil: 24VDC Application: Safety circuit Width: 90 mm Gusdpfxjytprbo Akaeg Height: 87 mm Depth: 120 mm Weight: 515 g Condition: Like new

Condition: like new (used), Coil: 24V AC/DC 3.0VA 1.5W 50-60Hz 1) ID No.: 774059826328 2) ID No.: 774059825212 Area of application: Safety circuit Gjdpeyt E Dmjfx Akasug Width: 22 mm Height: 87 mm Depth: 120 mm Weight: 214 g

Condition: new, Year of construction: 2026, functionality: fully functional, power: 148 kW (201.22 HP), filling opening width: 1,200 mm, filling opening length: 6,000 mm, number of blades: 150, rotational speed (max.): 80 rpm, rotor diameter: 390 mm, rotor width: 1,200 mm, Genox J1200 Series - Heavy Duty Horizontal Four Rotor Shredder suitable for processing long lengths of material i.e. pipe, profiles etc. 148kW combined shaft motor power (4 x 37kW) and an 18.5kW hydraulic power unit for the material feeder. The machine is equipped with heavy duty oversized gearboxes giving an 80rpm shaft speed. Four 1200mm wide x 390mm diameter rotors with 150 pcs of blades in total. The blades are 40mm concave reversible design manufactured from high quality, heat treated alloy steel. Material force feeding is regulated according to motor loading to achieve optimal throughput. These parameters can be easily configured on site to suit the materials being processed. Guedpfjz Ai Tcox Akasg Output size is controlled by a replaceable screen mounted beneath the lower rotor shaft, the size of which can be determined to suit the application. We also manufacture an 800mm version of this machine along with twin rotor and twin shaft (shear rotor) machines. Please contact us for more information and/or to discuss your requirements.

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 128-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 41 mm Shot weight: 246 g Injection pressure: 1890 bar Dosing volume: 271 cc Clamping unit: Clamping force: 128 t Tie bar spacing: 410x410 mm Platen size: 620x605 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and safety enclosure Guedpjzy Izaefx Akaeg Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 4000 kg Length/Width/Height: 4.90x1.30x1.80 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, We offer you: Manufacturer: DMG MORI Type: MillTap 700 Year of manufacture: 2016 Control: Siemens 840D sl Technical data: We offer you: Manufacturer: DMG MORI Type: MillTap 700 Year of manufacture: 2014 Control: Siemens 840D sl Technical data: Travel distances: X-axis: 700 mm Y-axis: 420 mm Z-axis: 380 mm A-axis: -100 / +120° C-axis (interpolating): 360° Main spindle: Max. spindle speed: 10,000 rpm Gjdszz Hrgjpfx Akaoug Drive power - main spindle (100/40%): 25 / 4.5 kW Torque: 29 / 45 Nm Work table: Table diameter: 200 mm Max. table load: 100 kg Tool changer: Tool interface: BT30 Number of tool positions: 15 Chip-to-chip time: 1.5 sec Feeds: Max. feed rate (x, y, z): 60 m/min Technical features & accessories: - Indirect linear scales in x, y, and z - Spindle with increased torque - Rotary through-spindle for table; 4-channel, 2x air, 2x oil - Automation interface, automation door on the right, and hydraulic preparation - Coolant system 40 bar, 20 l/min, double changeover filter with monitoring - Coolant in the working area - Coolant gun for chip flushing - Oil-emulsion mist separator, mechanical - Safety package for power failure - Tropical package - Filter monitoring Accessories, tools shown, and clamping devices are only included in the scope of supply if this is stated in the additional information. Changes and errors in the technical data and specifications, as well as prior sale, are reserved!

Condition: like new (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, total height: 2,075 mm, total width: 2,140 mm, total length: 3,250 mm, table length: 800 mm, overall weight: 2,450 kg, distance table to spindle center: 495 mm, Equipment: documentation/manual, ABENE milling machine, type VHF-320BS, in new condition, previously used in an educational institution. Specifications: - Year of manufacture: 2016 - Table dimensions: 800x400mm - X-axis travel: 600mm - Y-axis travel: 500mm - Z-axis travel: 450mm - Distance table-spindle: 45-495mm - 3-axis variable feed - Drilling spindle travel: 75mm - ISO 40 tool holder - Milling head, rotatable 140 degrees - Spindle speed: 55-3000 rpm, variable in 2 steps - Motor power: 7.5kW - Machine dimensions: 3250x2140x2075mm - Machine weight: 2450kg Machine equipped with: - SONY (Magnescale) digital readout on 3 axes - Variable spindle speed (digital display) - Variable feed, 3 axes (digital display) - Cooling system - Drilling spindle - Tool changer Guedpfx Aszt Ibtokaeg - Machine manual - Compliant with occupational safety regulations

Condition: used, first registration: 11/2007, Year of construction: 2007, GERGEN JUNG 2 - axle trailer for skip containers / containers, twin tires, air suspension • ABS • 2 x air-suspended 9-ton Mercedes axles • Disc brakes • Twin tires • Lift/lowering system • Axle load: 2 x 9,000 kg • Gross vehicle weight: 18,000 kg • Curb weight: 3,400 kg • Payload: 14,600 kg • Tyres: 265 / 70 R 19.5 • Tyre tread: 80 % • Total trailer length: 7,500 mm - Ready for operation! - General inspection / TÜV safety inspection: new! Errors and prior sale reserved! = Further information = GVW: 1 kg Please contact Joannis Arpantzanis or Kai Bühler for more information. Gedpfjyutx Uex Akajug

Condition: good (used), functionality: fully functional, mileage: 13,187 km, power: 140 kW (190.35 HP), gearing type: automatic, fuel type: diesel, Year of construction: 2007, operating hours: 13,187 h, Wheel loader Liebherr L556-454, 2plus2 configuration, year of manufacture 2007. Equipped with Liebherr engine D934L A6 delivering 140 kW, automatic transmission, and self-locking differentials on both axles. The stepless 2plus2 drive system and wet multi-disc brakes on both axles ensure high traction and operational safety. Gjdey Dt A Tspfx Akajug The machine features single-lever control, air conditioning, adjustable steering column, and a driver's suspension seat with LFD damping system for enhanced operator comfort. The cab is fitted with a laminated safety glass windscreen, green/tinted version. Additionally, there are 4 working lights at the front and 2 reversing lights. Attachments and special equipment: - 2600 mm lift mast - Piston rod protection for 2600 mm lift mast - 4 Michelin tyres 23.5 R25 XHA*L3 - Quick coupler - Single rail guide for Z-kinematics / 2600 mm lift mast - Single front hydraulic auxiliary circuit and additional hydraulic swing function - Automatic central lubrication system with electric pump and electronic control - Reversible fan drive - Electronic auxiliary module with keypad - Top-Air pre-cleaner - Control lever lift lock for add-on lever set - Operator seat with pneumatic suspension Grammer 24V - Radio installation kit 24V - Rear view monitoring with camera and monitor - German/Luxembourg version - Operating manual GT list A powerful and comprehensively equipped wheel loader, suitable for demanding tasks in construction, recycling, industrial applications, and material handling. Sale is made without warranty and liability.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, overall weight: 59 kg, load capacity: 10 kg, arm reach: 1,101 mm, controller manufacturer: Kuka, For sale is a modern robotic cell with a KUKA industrial robot, model KR 10 R1100-2 / SEL, from the AGILUS-2 series. The system is in very good, like-new condition and is ideally suited for various automation, handling, assembly, or testing applications. The robot is installed inside a robust, fully enclosed safety cabin made of aluminum profiles with large, transparent protective elements. The cell features an integrated linear/positioning unit and a customer-specific gripper or tool mounting. Due to its compact design, the system can be easily integrated into existing production environments. Technical data of the robot: - Manufacturer: KUKA - Type: KR 10 R1100-2 / SEL - Series: AGILUS-2 - Year of manufacture: 03/2025 - Payload: 10 kg - Reach: 1,101 mm - Robot weight: 59 kg - Article number: 0010028076 - Serial number: 4613832 - Origin: Germany The offered unit includes the robotic cell shown in the pictures, including the robot, enclosure, and the mechanics or peripherals installed within the cell, as depicted in the images. The system is suitable, for example, for pick-and-place applications, machine loading, parts handling, assembly, testing, and sorting tasks, as well as a basis for customer-specific automation projects. Condition: very well maintained / like new Year of manufacture of the robot: 2025 Inspection: possible by appointment. Gedpjzznziofx Akajug Subject to prior sale and errors.

Condition: used, This listing is for Biomat 2 1200EXH Class 11 Safety Cabinet. The unit is in full working condition and ready for immediate use. Available with or without the stand Caution. The height of the unit including the filtration unit is 1960mm (Without the optional stand) and 2610mm when on the stand (+-10mm adjustable glides) Overall width 1200mm and depth 1180mm (Note the extra depth). The foot print is square This high-performance recirculating enclosure utilizes dual fan HEPA filtration to deliver dependable workspace containment, protecting personnel and product environments in modern research and bioprocessing laboratories Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: Guodozc Hthspfx Akajg This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. [[1](?srsltid=AfmBOoo2CxS6O5SCG0S0zUWDq4xUKCgkGbkylLnULHI4J729cw GPs-bk)] Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, maximum load weight: 22,120 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2021, loading space length: 13,300 mm, loading space width: 2,400 mm, loading space height: 2,500 mm, loading space volume: 84 m³, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2021, Equipment: ABS, 3-axle Kempf SKM 35/3 SK steel tipper body HARDOX VIN: M039731 Chassis / Components: * Air suspension / Raise and lower function * Lift axle * 3 x BPW Eco axles with drum brakes * Axle load indicator via EBS * Tires: 385/65 R.22.5 * Tire tread depth: Front ~60/70%, Middle ~80/90%, Rear ~60/40% * Retractable underrun protection (manual) * Steel chassis, fine-grained steel * Chassis in a box-shaped, reinforced design * All components in hot-dip galvanized finish Body: * Steel chassis, fine-grained steel * Steel tipper body made of HARDOX steel (HB-450), reinforced design * Front cylinder Hyva, max. 150 bar, single-circuit hydraulic system * Working volume of the tipping cylinder approx. 190 liters * Volume: approx. 84 m³ * Loading area: 13,300 mm x 2,400 mm x 2,500 mm (front) / 2,700 mm (rear) * Floor: continuous 6 mm HARDOX steel * Front and side walls: made of 4 mm HARDOX steel * No standing platform / however, a small walkway on the left and right next to the tipping cylinder * Rear wall as a 2-wing door (1/2 left - 1/2 right split) * No swing door / no sliding gate * No rubber seal * Twist lock as a container locking mechanism * 2 hook locks, manual Weights: * Gross vehicle weight 35,000 kg * Payload 22,120 kg * Tare weight 12,880 kg Other: * German registration * New main inspection possible -- valid until 02/2027 New main inspections / safety checks or weight reductions / increases are possible upon request. We will be happy to assist you in obtaining export / transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. Gusdpfx Akez Al Snsasg Convince yourself! Our service for you: Loading vehicles We will be happy to help you load your purchased vehicles. Organizing special transports We will be happy to help you organize special transports. Daily license plates / export license plates We will be happy to help you obtain export license plates / short-term license plates. Handling customs formalities We will be happy to help you with customs matters.