Used Weiss Positioning Table, Rotary Table for sale (24,103)

Condition: used, table diameter 500 mm weight of the machine ca. ca. 0,2 t table height / mm Isdpjylz D Hsfx Anvoau

Condition: used, Year of construction: 1999, plate width 2980 mm plate depth 3000 mm plate height 1400 mm total power requirement 11 kW Iedpfx Ajgxqvzjnvjau

Condition: good (used), Machine vice base plate, clamping plate, vise plate, rotary table -Rotary table: Turntable for vise -T- Round groove: 20 mm, dimensions see photos -Degree display -Dimensions: 350/320/H45 mm Iedeykzhvjpfx Anveau -Weight: 20 kg

Condition: used, Rotary Table WMW Type D 315 k Rotary table with mechanical drive, crank, and scale Dividing head, indexing table Serial No.: 16508 Table diameter: 315 mm Table height: approx. 135 mm Transmission ratio: 90:1 - Crank with index plate and sector arm - Scale ring for reading at the crank - Readable degree graduation on the rotary table - Pivotable worm gear for direct indexing - Clamping via clamping screw - 14 mm T-slots in the table surface - Cardan drive - Built-in index plate: 17-25-30-39-47-57 - Rotary table drive suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E - Dividing head (index plate = 20) suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E Ijdoxcbpiopfx Anvoau Weight: 145 kg Good condition

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off Iodjxabm Njpfx Anvoau - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm Isdpfx Anoxabl Sevjau motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. Isdpfx Asxaatnonveau - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg Iedpfexaafqsx Anvoau turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Year of construction: 2015, condition: used, workpiece diameter 300 mm workpiece weight 999 kg workpiece height 145 mm Iedpfx Ajxflcljnvjau Features: -Digital display vertical axis -Automatic feed -Programmable automatic end stop -Grinding spindle drive with infinitely variable electronic speed control -Infinitely variable cross feed and table rotation -24V magnetic clamping plate 300 mm -Various occupational safety devices, e.g. protective cover monitoring, operating status display via traffic light -Lubricating oil level monitoring -The machine was completely overhauled in 2015, at which time the entire electrical system was replaced with PLC control and 24V control voltage -Paper belt filter system specially designed for this machine The following work has now been carried out: -Replacement of bellows and belts -New bearings for grinding spindle -Grinding carriage bed and rotary table bed scraped by hand to restore better and more precise running characteristics -Grinding carriage and cross table lifted from machine body and all tracks cleaned, lubrication checked -Various wear parts, such as rubber caps and switching elements, replaced -Detailed functional check -Modernisation of feed arm -Paint touch-up work, machine colour: light grey RAL 7035 and RAL 7012

Year of construction: 1994, condition: used, workpiece diameter 350 mm workpiece weight 99999 kg workpiece height 240 mm total power requirement 7,5 kW weight of the machine ca. 2 t Seltene Gelegenheit: Teilüberholte Hochpräzisions-Rundtischflachschleifmaschine Mit komplett neuem Schaltschrank und neuer Steuerung mit BEMA Schleifsoftware Rundtisch-Durchmesser 380mm Magnet-Durchmesser 350mm Schleifscheibenabmaße 300x25x76,2mm Tischdrehzahl variabel max. 200U/min Schwenkwinkel des Tisches +-3 Grad Schleifspindeldrehzahl 800-4200 U/min Leistung Schleifspindelantrieb 5KW Verfahrweg quer max. 225mm Verfahrweg vertikal max. 480mm Abstand zwischen Magnetspannfutter und Spindelmitte, max. 390mm Automatischer Kopfabrichter AF65: zum zylidrischen Abrichten der Schleifscheibe im CD-Abrichtverfahren (Abrichten während des Schleifprozesses) Hierdurch werden Schleifzeiten reduziert und Abrichtzeiten eingespart. Der Abrichtbetrag wird automatisch kompensiert. Automatische Antasteinrichtung AT-R: bietet die Möglichkeit, mit der Schleifscheibe das Werkstück schnell und automatisch anzufahren. CNC-Steuerung mit höchstem Programmierkomfort Unterschiedliche Schleifprogramme für -Pendelschleifen Iajdpfoxbtl Tjx Anveu -Kurzhubschleifen -Einstechschleifen -jeweils eine oder mehrere Flächen in gleicher oder unterschiedlicher Höhe Ins Schleifprogramm integrierte Abrichtzyklen -Tischabrichten mit Einzeldiamant -Automatisch Geradabrichten -CD-Abrichten mit AF65 Minizyklen: -automatisches Antasten an das Werkstück -Positionieren einzelner Achsen -Abrichten Einsatzgebiet: Hochgenaue Planschleifarbeiten in der Mittel- und Großserienproduktion bzw. Einzelteilfertigung in zentrischer Aufspannung

Condition: used, Motor-driven indexer and rotary table, also known as indexing table with 15° indexing lock. Manufacturer: WALTER, Type: TARM 125 Serial No.: 1156, Year of manufacture: approx. 1985 Indexing lock: 15° Flange mount: short taper DIN 55022 size 5, Ø 82 mm Internal diameter of chuck flange: Ø 44 mm Continuous internal diameter: Ø 40 mm Construction height to flange mount without taper: 163 mm Horizontal clamping surface: 260 x 215 mm Vertical clamping surface: 195 x 160 mm Center height vertical: 125 mm Motor speed: 0 to 500 rpm Power supply: 380 Volt, 50 Hz - external control required (control unit not included) Iasdpfoyhq A Dex Anveu - can be used vertically and horizontally - usable as indexer or rotary transfer table - one direction of rotation continuous, the other direction with 15° indexing lock Space requirement L x W x H: 500 x 215 x 177 mm Weight: 42 kg Good condition

Condition: used, Year of construction: 2007, table diameter 4520 mm table load 35000 kg swivelling range 110 Grad total power requirement 44 kW weight of the machine ca. / t required space / m Type: ROMAT 350 / LVEB-120000N-4m / VVEs-D-18000N-5m-S / QVEB-2m travelling beam / CR-200000N / Hydraulic scissor lift table In the scope of delivery: Item Designation 1 Welding power source GLC 603 Quinto SD 2 Wire drum 3 Service door 2.1 4 Robot control cabinet 5 Service door 1.2 6 Scissor lift table (shown in parking position) 7 Cross-travelling unit QVEB 8 ROMAT 350 robot 9 Service door 1.1 10 Safety fence 11 Platform 12 Positioner 13 Sliding door 1 14 Linear traversing unit LVEB 15 Vertical traversing unit VVEs 16 Sliding door 2 The disc ring on the table is a device that is not included in the scope of delivery ----- Technical data - Mechanical dimensions (without control unit and superstructures): approx.6440(57 7 0)x4520(2700)x5460(3320) LxWxH - Turntable diameter: 4520mm - Weight: approx. 25,000kg (without superstructure) - Speed range: 0.004 - 1.07 rpm - Welding current coupling: 600 A - Maximum table load capacity: 35 tons (according to load chart) Ambient temperature Storage / transport 0 to 60'C Operation +4 to 35 "C Interfaces Central transfer point for control, power supply, earth connection ----- 2.3 Linear traversing unit, LVEB Type LVEB-120000N 4m Dimensions W x D x H 7,700 x 2,440 x 776 mm Weight 4,355 kg Travelling distance 4,000 mm Load of the carriage 120,000 N Drive unit Gear motor Precision bevel gear motor Manufacturer Stöber Type K402VF0250EK703V Power 4.21 kW Voltage UKE 140 V / 1000 rpm Current Rated current IN: 8.32 A Type of current Standstill current I0: 9.04 A Motor speed 3,000 rpm Gear ratio i = 25.28 ----- 2.4 Vertical traversing unit, VVEs Type VVEs-5m Dimensions W x D x H 2,000 x 1,960 x 7,150 mm Iedpfjrmulvex Anvoau Weight 9,500 kg Travelling distance 5,000 mm Max. moving mass 18,000 N Drive unit Gear motor Bevel gear motor with brake Manufacturer Stöber Type K713VF0790MQ30ED704B Power 4.8 kW Motor speed 2,000 rpm Gear ratio i = 78.83 (20181/256) ----- 2.5 Cross-travelling unit, QVEB Type QVEB-2m Dimensions W x D x H 1,270 x 4,100 x 756 mm Weight 1,950 kg Travelling distance 2,000 mm Load on the travelling beam 10,000 N Max. moving mass 18,000 N Drive unit Gear motor Precision flat geared motor Manufacturer Stöber Type FS202VQ0145ED402U Power 1.43 kW Voltage UKE 140 V / 1000 rpm Rated current IN 2.86 A Type of current Standstill current I0: 3.1 A Motor speed 3,000 rpm Gear ratio i = 14.65 (3180/217) ----- 2.6 Rotary indexing table Type CR-200kN Manufacturer Cloos Dimensions W x D x H 1,820 x 2,120 x 541 mm Weight 2,850 kg Drive unit Gear motor Bevel gear motor Manufacturer Stöber Type K814VG1540EK803U Power 6.7 kW Motor speed 3,000 rpm Gear ratio i = 154.322 ----- 2.7 Robot ROMAT 350 Type ROMAT 350 Dimensions (W x D x H) in reference position 1,900 x 600 x 1,500 mm Weight 205 kg Footprint 500 x 515 mm N...

Year of construction: 1980, condition: good (used), Equipment: 4 horiz. Pinol drilling units, 3 vert. Pinol drilling units Iodpfxsnvdmwj Anvjau rotary table diameter: 400 mm rotary indexing table: 60° pitch weight: 2,6 to 1 switch cabinet 1 coolant tank

Condition: used, table diameter 790 mm table load 500 Kg swivelling range 0 - 135 Grad turning speeds max. 2,0 U/min Iedpfx Aoyx Ip Ronveau connected load frequency 400 V weight 0,95 t Dimensions (LxWxH) 1,4 x 0,8 x 1,5 m Welding turntable incl. - Control column with foot switch - 630mm chuck - Chuck key

Year of construction: 2020, condition: new, Hydraulically height-adjustable tilt and turn table Maximum load: 2.500kg Iaodpfxsd H Hzbs Anveu faceplate diameter: 1.200 mm Stroke:1,050 mm

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 7,500 kg, total length: 3,134 mm, total width: 1,738 mm, type of input current: three-phase, rotary table diameter: 1,200 mm, overall weight: 3,000 kg, height adjustment type: hydraulic, torque: 6,350 Nm, welding current (max.): 600 A, warranty duration: 12 months, Equipment: foot remote control, Hydraulically height-adjustable rotary tilting table Maximum load: 7,500 kg Iajdpfjt Hfrcsx Anvju Face plate diameter: 1,200 mm Height of faceplate: 900mm-2,084 hydraulic Height of 90° tilted faceplate: 710mm-1,894mm Tilting range: 135° hydraulic Faceplate speed: 0.04-1 rpm electromotive Operation: Manual remote control and two-pedal foot switch

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 20,000 kg, total length: 4,750 mm, total width: 2,600 mm, type of input current: three-phase, rotary table diameter: 2,500 mm, height adjustment type: hydraulic, torque: 6,350 Nm, welding current (max.): 600 A, warranty duration: 12 months, Equipment: foot remote control, Hydraulically height-adjustable turn/tilt table Maximum load: 20,000kg (permitted center of gravity 700mm) Iedpfx Aot Hgmuonvsau Torque: 30.000Nm Face plate diameter: 2,500 mm Height of faceplate: 1,326mm-2,641 hydraulic Height of 90° tilted face plate: 1,045mm-2,360mm Tilting range: 135° hydraulic Faceplate speed: 0.1-2 rpm electromotive Operation: manual remote control

Condition: ready for operation (used), total height: 300 mm, total width: 550 mm, total length: 800 mm, Hainbush 4-th axis rotary table, including 4 quick connections. We have 2 similar rotary tables total, price is for each table. Iaodjvmp Avopfx Anvju

Condition: used, Year of construction: 2008, functionality: fully functional, Used HAAS rotary table model HRT310 complete with HAAS pneumatic drive and tailstock. Iodpfjwu Uahsx Anveau

Condition: used, No. 720: Seldom used pneumatic rotary indexing table, 270 mm, 8 positions No. 721: Machine vice, jaw width 125 mm, clamping width 250 mm, rotatable, 360-degree scale No. 722: Bending roll, 350 mm diameter, throat 50 x 60 mm, bending groove 20 mm diameter No. 723: Mounting plate, 500 mm diameter x 30 mm, flange 230 x 30 mm, second side 120 x 25 mm, mounting holes 6 positions No. 724: Flange 350 x 55 mm, collar 230 x 5 mm, 4 x M16 PCD 275 mm, bore 40 mm, bottom side recess 200 x 15 mm No. 725: Press brake tool, 90 degrees, bending length 250 mm, tool length 550 mm No. 726: Flange 250 x 30 mm, 4 bolts PCD 130 mm, 3 holes PCD 210 mm, bore 102 mm, lower side collar 200 x 5 mm No. 727: Festo feed unit BV 100200 with control block, max. belt width 60 mm, max. feed 200 mm No. 109: Electromechanical rotary indexing table, 8 stations, table 850 x 850 x 830 mm, 2 control cabinets Iodpeyvqc Isfx Anvjau Prices on request All dimensions are non-binding; if you require exact measurements, please inquire.

Year of construction: 1987, condition: used, machine/vehicle number: 6489; Lg-Nr. 13105, Technical data: - max. load capacity 3000 kg - Face plate cross 1600 x 1600 mm - Cross face extension tubes - face plate cross mot. swivelling 0 - 90 / 135 ° Iasdpfxebp Ddzs Anveu - rotation infinitely variable 0,01 - 4 rpm - right - + left rotation controllable - Welding current transmission approx. 500 A - Drive 400 V - Table height in horizontal position without underframe approx. 1200 mm - Table height in horizontal position with underframe approx. 2200 mm - Space requirement approx. W 1600 x H 1200 + 1000 x D 2400 mm - Weight approx. 2700 kg

Year of construction: 1986, condition: good (used), machine/vehicle number: xxxx; Lg-Nr. 16059, Technical data: -Load capacity at horizontal position 15000 kg -Load capacity in vertical position 10000 kg -Planpauc diameter 1850 mm -Plane disc with crane support can be swivelled continuously -Rotary motion electr. infinitely controllable -Right-Link Run -Drive 400 V -Ft remote taster Iasdpod Nauiefx Anvou -Massea cables -Welding current transmission 500 A -Table height at horizontal position 1850 mm -Space requirements approx. B 2450 x H 1850/2300 x T 3000 mm -Weight approx. 6000 kg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1085, Offer 24448 Technical specifications: - Maximum load capacity 5000 kg - Maximum clamping diameter 1800 mm - Faceplate dimensions 1200 x 1200 mm - Continuously adjustable electrical rotation - Right and left rotation - Electric remote control Ijdowfq Nmepfx Anveau - Welding current transmission approx. 650 A - Drive 400 V / 2.2 kW - Space requirement approx. W 1500 x H 1650 x D 1300 mm - Weight approx. 2500 kg

Condition: good (used), Year of construction: 1993, machine/vehicle number: D206311, Offer 23344 Technical data: - Load capacity 20 kg - Face plate diameter 320 mm - Face plate can be swiveled left + right with grid adjustment - Faceplate speed electr. infinitely variable - Faceplate with right + left rotation - Hollow shaft with passage approx. 25 mm - Welding current transmission 300 A - Drive 400 V - Table height in horizontal position 820 mm Iasdpfxsq Ev Sts Anveu - E. foot switch - Space requirement with table approx. W 600 x H 820 x D 500 mm - Weight approx. 100 kg

Year of construction: 2006, condition: good (used), machine/vehicle number: 1610, Offer 22163 Technical data: - Load capacity 100 kg - face plate diameter 400 mm - face plate infinitely variable inclinable - table height at horizontal position approx. 470 mm - rotary movement electr. infinitely variable 0 - 2,5 m/min - welding current transmission 400 A - drive 400 V - right - left rotation - Foot switch with foot roller controller for speed regulation - ground cable - space requirement approx. W 700 x H 700 x D 600 mm Iaedonqzp Uepfx Anvju - Weight approx. 100 kg