Used Welding Fume Filter for sale (12,743)

Condition: used, functionality: fully functional, load capacity: 1,500 kg, Equipment: foot remote control, Pfeiffer welding positioner, 1500 kg load capacity with accessories including clamping jaws (see photo) Welding current transmission: 600 A Disc diameter: 1000 mm Height when tilted to center: 1000 mm Height in horizontal position: 1200 mm Length: 2000 mm Kodszvu Dyjpfx Aklsna Width: 1200 mm Speed: continuously adjustable with remote control with hand and foot remote control

Condition: used, Year of construction: 2011, Used Equipment Knjdpfxjzvz Tbj Aklea Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: like new (used), functionality: fully functional, overall weight: 5,860 kg, MASĂ INDUSTRIALĂ DE LĂCĂTUȘERIE ȘI SUDURĂ – PRELUCRATĂ CNC, PLANEITATE RIDICATĂ, 5,86 TONE Se oferă spre vânzare prin licitație masă profesională de lăcătușerie și sudură, destinată aplicațiilor industriale grele, operațiunilor de montaj, asamblare și sudare a structurilor metalice de mari dimensiuni. Un avantaj major al acestei mese îl reprezintă blatul prelucrat CNC pe întreaga suprafață de lucru, operațiune realizată pentru obținerea unei planeități ridicate, esențială în procesele de montaj, verificare și sudură unde precizia și stabilitatea dimensională sunt critice. Specificații tehnice Knodpfx Akozc Uwnelea Tip echipament: Masă industrială de lăcătușerie și sudură Greutate: 5,86 tone Lungime: 5.990 mm Lățime: 2.020 mm Înălțime: 620 mm Grosime blat de lucru: 40 mm Suprafață utilă: aprox. 12 m² Prelucrare: frezare CNC pentru asigurarea unei planeități superioare Construcție: cadru metalic greu, ranforsat Avantaje ✔ Blat masiv de 40 mm prelucrat CNC pentru planeitate ridicată ✔ Construcție industrială robustă, cu greutate proprie de 5,86 tone ✔ Stabilitate excelentă pentru lucrări de sudură și montaj greu ✔ Suprafață mare de lucru pentru ansamble și structuri de dimensiuni mari ✔ Potrivită pentru operațiuni de verificare, aliniere și poziționare a componentelor metalice ✔ Ideală pentru ateliere de confecții metalice, producție industrială, construcții metalice și mentenanță Domenii de utilizare Sudură industrială Construcții metalice Montaj și asamblare structuri grele Verificare dimensională și control geometric Fixarea și poziționarea reperelor înainte de sudare Execuția și repararea utilajelor industriale Descriere comercială Masă industrială de mare capacitate, construită pentru utilizare intensivă în medii de producție. Blatul gros de 40 mm a fost prelucrat CNC pentru obținerea unei suprafețe cât mai plane, oferind condiții optime pentru montajul și sudarea ansamblelor complexe. Datorită masei proprii de aproape 6 tone și a construcției extrem de rigide, reprezintă o soluție ideală pentru aplicații industriale unde precizia, stabilitatea și rezistența sunt esențiale. Echipament profesional, dificil de replicat la costuri actuale, potrivit pentru companii din domeniul construcțiilor metalice, producției industriale și al prelucrărilor mecanice grele.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: documentation/manual, foot remote control, Tilting device for containers, welding table, welding turntable, roller stand 3000 kg load capacity with foot-operated remote control Speed infinitely adjustable, 80 to 1600 mm/min. Diameter 40 mm to 1400 mm Roller diameter 200 mm L: 800 x W: 370 x H: 450 Kjdpjzu I Ipefx Aklena Model or color variations possible Note: Height adjustment / support stand dimensions can be customized for an additional charge. Example as shown in the image. Additional charge: €1200.

Condition: ready for operation (used), Year of construction: 2004, number of axes: 6, Welding robot manufactured in 2004. This ABB IRB 2400L Welding Cell features a robust design with a positioner model ABB IRB 500R and includes Fronius TPS 4000 welding equipment. It comes equipped with essential safety features such as a light curtain and safety fencing. If you are looking to get high-quality welding capabilities, consider the ABB IRB 2400L Welding Cell we have for sale. Contact us for further details. Knsdjzhmryspfx Aklja - Industrial Robot Model: ABB IRB 2400L- Positioner Model: ABB IRB 500R- Welding Equipment: Fronius TPS 4000- Supply Voltage: 3x400V/PE/N- Cable Cross-section: 5 x 16 mm²- Fuse Protection: 63 A delayed- Compressed Air Requirements: 6 bar, G1/2"- Robot Control Cabinet: Included- Machine Sequence Control Cabinet: Included- Robot Base Height: 800 mm- Safety Equipment: Light curtain, safety fencing, glare protection partition wall, service door (monitored by ABB), rear access protection (mechanical, h=1100mm)- Maintenance Units: Torch cleaning system, TCP Calibration unit- Control Stations: Main start panel, Pre-Reset button- Footprint Dimensions: Approx. 8025 mm (length) x 5500 mm (width)- Center-to-center distance: 2000 mm x 1200 mm turning circle- Load capacity: 500 kg per side of the table / Maximum load difference: 350 kg- machine hours: 68.107h

Condition: new, table diameter 500 mm table load 300 horizontal kg table load 150 vertikal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Features: - The table can be tilted and locked at angles ranging from 0° to 90° - Manual tilting - Start/stop via a foot switch that can be used from any location - Selectable rotation direction: clockwise/counterclockwise - Rotation time adjustable - Welding machine controlled via control unit - 350-amp ground connection Kedpfx Akexabl Selena Scope of Delivery: - Control unit (integrated) - Foot switch THE ROTARY TABLE HOUSING MUST BE CONNECTED DIRECTLY TO THE BUILDING GROUND! CAUTION!! Vertical load limit: 150 kg only

Condition: new, table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm total power requirement 230 Volt weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless Knjdpfexaatnsx Akloa - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: E1361000, overall weight: 600 kg, load capacity: 8 kg, arm reach: 2,028 mm, pivoting range: 360 °, controller manufacturer: Fanuc, controller model: R-30iB Plus, teach pendant manufacturer: Fanuc, teach pendant model: Fanuc A05B-2256-C101#EGN, control cabinet width: 600 mm, control cabinet height: 600 mm, input voltage: 400 V, input current: 32 A, type of input current: three-phase, welding current (max.): 400 A, Equipment: documentation/manual, Fully functional and in excellent condition robot welding cell. Fanuc arm and 2-axis positioner, Fronius powersource, wire feeding and push-pull torch. Kedpezu Irnsfx Akljna FANUC ARC Mate AM-100iC/8L robot R-30iB Plus controller FANUC 2-axis postitioner A05B-1220-J201-N, payload 500kg Fronius TPS 400i powersource with PMC package Thielmanni nozzle cleaner SICK curtains Installed 2021 Robot station is fully operational, in good condition and can be seen in use.

Condition: excellent (used), Year of construction: 2017, Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Condition: unused, without extraction fan -Manufacturer: INFASTAUB, filter system cartridge filter with pneumatic filter cleaning -Type: AJV 800-980-22 P -Cyclone separator: made of stainless steel -Inlet opening: Ø 110 mm -Outlet opening: pneumatic shut-off valve Ø 300 mm -Dimensions: 1730/1730/H5500 mm -Quantity: 2 pieces available Kjdpfsytgrxsx Aklsna Price: per piece -Transport dimensions: 4 loading meters, height 1730 mm -Weight: 1120 kg

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, warranty duration: 12 months, input voltage: 230 V, total length: 420 mm, total height: 450 mm, total width: 245 mm, volume flow: 420 m³/h, Equipment: chassis, low noise, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. Ksdpfxsxrgl Is Aklona - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, total width: 245 mm, total length: 420 mm, total height: 450 mm, input voltage: 230 V, noise level: 59 dB, warranty duration: 12 months, volume flow: 420 m³/h, Equipment: chassis, type plate available, Fume extraction with remote control and suction hose Air inlet interface ρm flange Kjdpfxjxt Dq Rj Aklsna Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20001901, type of input current: three-phase, overall weight: 990 kg, input voltage: 400 V, total width: 1,780 mm, total length: 2,130 mm, total height: 3,070 mm, volume flow: 14,000 m³/h, filter area: 189 m², suction capacity: 14,000 m³/h, power: 15 kW (20.39 HP), input frequency: 50 Hz, input current: 26 A, intake vacuum (max.): 48 mbar, actuation type: electric, ESTA DUSTMAC F-189 industrial welding fume extraction/filtration unit for sale. Suitable for extracting and filtering welding fumes and dust from multiple extraction points, welding booths, or large capture hoods. Main technical specifications: - Manufacturer: ESTA - Model: DUSTMAC F-189 - Year: 2020 - Serial No.: 20001901 - Filter surface area: 189 m² - Number of filters: 9 pcs - Max. airflow rate: approx. 14,000 m³/h - Max. negative pressure: approx. 4,800 Pa - Main fan motor power: 15 kW - Voltage: 400 V / 50 Hz - Motor speed: 2945 rpm - Current: 25.9 / 15 A (according to the motor nameplate) - Approx. dimensions: 2,130 x 1,780 x 3,070 mm - Weight: 990 kg (according to the nameplate) Knjdpfxezuwqtj Aklea The unit was reportedly used for approximately one year and then put into storage. Used equipment, sold as-is. Currently visible but not connected to power. Condition and completeness are shown in the photos. Location: Estonia. Loading: Forklift capability is available on-site. We can load the equipment onto the buyer’s truck. Transport: Transportation costs are the responsibility of the buyer.

Year of construction: 2021, condition: excellent (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: HEINRICHSGLÜCK, swiveling welding rotator -Type: DK1.000-P800 -Load capacity: 1000 kg -Control: via foot pedal -Three-jaw chuck: Ø 380 mm, three-jaw chuck bore Ø 150 mm -Base plate: Ø 800 mm -Speed: 0-1.5 rpm Right/Left rotation -Axles: 2 pieces -tiltable: electric Kedpfey Ul D Dox Aklena -Height adjustment: No -Transport dimensions: 1430/1040/H1175 mm -Weight: 913 kg

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, input voltage: 400 V, nominal power (apparent): 45 kVA, electrical fuse: 15 A, working range: 50 mm, open-circuit voltage: 28 V, nominal power at 50% duty cycle: 45 kVA, We offer this refurbished IDEAL BAS 050-11 butt welding machine, year of construction 1998. type: BAS 050-11 serial number: 224085 year of manufacture: 1998 year nominal power at 50% ED: 45 kVA rated apparent power: 45 kVA Knodjzudivepfx Aklja no-load voltage: 28/44 V max upsetting force: 250 kN primary voltage: 400 V rated frequency: 50-60 Hz fuse rating: 15 A Bi-metal / carbide bandsaws: 6×0.6 – 34×1.1 mm Wood saw blades: 6×0.4 – 50×1.0 mm Stainless steel saw blades: 6×0.4 – 25×0.5 mm Strip blades: 6×0.4 – 30×0.6 mm If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1983, Schenk ZHF Kieselguhrfilter Additional title: Kieselguhr filter Capacity: 3000 l/h Max. pressure: 6 bar Max. temp.: 20 °C Vessel content: 680 l Operation / Control: manual operation, with buttons / switches on the control box Material: stainless steel Position: Fixed to the floor on a frame Features: CIP heat exchanger with fittings, dosing vessel, dosing pump, control cabinet, electric motor for shaft drive Kedozty Irepfx Aklona

Condition: used, MIG MAG welding machine, gas-shielded welding system, MESSER LINCOLN, type MagStar 18 Serial No. 4210048, Year of manufacture approx. 1995 Output: 180 amps = 60% duty cycle 140 amps = 100% duty cycle Setting range: 8 power levels Mains connection: 400 volts, 50 Hz, 16 amp plug - Spot welding attachment - 2-roller wire feeder Knodpfjzugn Isx Aklsa - 3 meter hose assembly with central connection - Welding gas pressure regulator Space required L x W x H: 1150 x 460 x 650 mm Weight: 100 kg In good condition

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Manufacturer's No. 8198, Year of manufacture 1994 Rated power 400 amps Knodpfxezugnzs Akloa Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Adjustment range: stepless Connection hose package: 4.5 meters Mains connection: 380 volts, 50 Hz, 32 amp plug - 2-cycle and 4-cycle welding unit - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Good condition

Year of construction: 2021, condition: excellent (used), 2021 Versa Tech Enterprise Soundproof Welding Room/Acoustic Welding Enclosure Consisting of: 1. 1st Enclosure 3 Twin Door Soundproof Welding/Assembly Booths Dimensions (2) W3,000 x D4,000 x H2,700mm & W4,000 x D4,000 x H2,700mm With Donaldson Torit Extraction Unit Dimension W1,399 x D1,284mm. Knodpfx Akezk Dw Eolsa 2. 2nd Enclosure 2 Assembly Soundproof Booths Dimensions W4,800 x D4,000 x H2,700mm & W2,800 x D4,000 x H2,700mm With Donaldson Torit Extraction Unit Dimension W1,399 x D1,284mm. 3. 3rd Enclosure 2 Soundproof Welding/Assembly Booths Dimensions W2,500 x D2,500 x H2,700mm & W4,200 x D2,500 x H2,700mm With Donaldson Torit Extraction Unit Dimension W1,399 x D1,284mm. 4. 4th Enclosure 3 Twin Door Soundproof Welding Booths Dimensions (2) W2,000 x D2,500 x H2,700mm & W3,000 x D2,500 x H2,700mm With Donaldson Torit Extraction Unit Dimension W1,319 x D1,284mm. 5. 5th Enclosure 6 Twin Door Soundproof Welding Booths Dimensions (5) W2,000 x D2,500 x H2,700mm & W3,000 x D2,500 x H2,700mm With Donaldson Torit Extraction Unit Dimension W1,119 x D1,284mm. Please see document attached for more details.

Condition: excellent (used), functionality: fully functional, Lifting, rotating 360°, swiveling 360°, also overhead operation Severt L manipulator, 1000 kg load capacity PRODUCT TYPE S10 TYPE CODE S10.1-1HH 1000kg / 2000 Kg LOAD CAPACITY (KG) 1000 / 2000 Kg LIFT (MM) 1000 ARM LENGTH (MM) 1500 / 2000 Torque Kedpfx Aozubw Rsklona CLAMPING PLATE (NM) 1400 BENDING MOMENT ARM (NM) 3000 FREQUENCY CONVERTER yes LIFT DRIVE hydraulic SELF-WEIGHT (KG) 1700 All machines come with documentation and operating instructions.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 304272, input voltage: 400 V, nominal power (apparent): 10 kVA, electrical fuse: 10 A, welding power (max.): 5 kVA, nominal power at 50% duty cycle: 5 kVA, overall weight: 180 kg, workpiece weight (max.): 200 kg, iDEAL BAS050-11 is a band saw blade welding machine with GTR control. It operates at 380-419 V and 50/60 Hz with a power of 4.5 kVA. Equipped with the GTR pyrometer option: annealing temperature is set by recipe and monitored contactless, ending the cycle automatically for repeatable, operator-independent weld quality. Machine is from 2019, in very good condition, water-cooled, and ready for immediate production use. Hydraulic clamping (BAS 050-11): Both clamping jaws are operated hydraulically via foot switches, freeing both hands for blade positioning. The automatic sequence moves the machine to the annealing position after welding without manual intervention. Knsdezqdkxjpfx Aklsa Make and Model: iDEAL BAS 050-11 Year of manufacture: 2019 Serial no.: 304272 Pyrometer (GTR): yes (temperature display on touch panel) Clamping hydraulic: foot switch operation Clamping force: 10 kN (hydraulic) Upsetting force: max. 2.2 kN Secondary voltage: 2.6 – 4.4 V (6 stages) Voltage: 380-419 V Frequency: 50/60 Hz Power: 4.5 kVA Wood saw blades: 6×0.4 – 50×1.0 mm Bi-metal / carbide bandsaws: 6×0.6 – 34×1.1 mm Stainless steel saw blades: 6×0.4 – 25×0.5 mm Strip steel S235JR: max. cross-section 75 mm² Machine weight approx. 180 kg: Hydraulic clamping (BAS 050-11 specific): Both clamping jaws are operated hydraulically via foot switches, freeing both hands for blade positioning. The automatic sequence moves the machine to the annealing position after welding without manual intervention.: Pyrometer / GTR option: Integrated pyrometer (GTR) enables contactless temperature measurement during the annealing process. Target temperature is stored in the recipe and displayed on the touch panel — the annealing cycle ends automatically when the set temperature is reached, eliminating operator-dependent variables and ensuring repeatable weld quality.: Included: Machine, operating tools, operating instructions.:

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: 2331 280, We sell a used Bolte Pro I-2200 stud welding unit with microprocessor control. MFG 2023, serial number: 2331 280 The trolley version of the PRO-I 2200, with two large, extremely robust wheels and a telescopic handle, is ideal for mobile use on construction sites. Technical features and advantages: Excellent welding quality – modern inverter technology ensures very precise control and high reproducibility of the welding process Very high arc stability – also in cases of short welding times and low welding currents Powerful – high welding current of 1050 A for a maximum welding diameter of 13 mm Fast welding sequences through innovative cooling concept Ideal for mobile use – considerably less weight than conventional stud welding units Robust construction for use in harsh environments Low energy consumption due to high efficiency Easy operation via a very robust rotary pressure switch Microprocessor control All functions and parameters are displayed on a large display (display contrast is adjustable) Welding program library Welding program storage – 59 Welding range: Ø 2-22 mm Welding current: 100-2100 A Welding method: studs with ceramic rings or shielding gas and short-cycle stud welding with or without shielding gas Welded materials: steel, stainless steel, aluminum Voltage: 320-495 V, 32 A, 50/60 Hz Power source: transformer/rectifier Welding time: 1-1500 ms, continuously adjustable Protection class: IP23 Dimensions (W x H x L) (mm): 550x850x650 mm Weight: 81 kg Kodpfx Aoy Tqwyekljna drawn arc stud welding gun GD 22 WMS is designed for welding shear connectors with large diameters (19 and 22 mm). Welding range Ø 3-22 mm Welding material steel, stainless steel Stud length 10-525 mm Welding method (acc. to DIN EN ISO 14555) stud welding with ceramic ferrule, stud welding with shielding gas Lift 0-6 mm, adjustable (raster: 0,3 mm) Welding cable: 2 m, 95 mm², outside Control cable plug: 12-pin Dimensions (WxHxL): 68x180x295 mm Weight (without cable): 2,45 kg The new drawn arc stud welding gun GD 22 is designed for welding shear connectors with large diameters (19 and 22 mm). The ample-dimensioned adjustable lift (adjustment range: 0-6 mm) ensures in combination with the adjustable hydraulic piston damper optimum welding results in this diameter field. Of course, the new guns are suitable for welding through metal deck. The gun also features a piston with linear ball track, an automatic length compensation system for different stud lengths and surface conditions as well as a robust, impact resistant housing for the hard work on the construction site. The high-grade outside welding cable (cable cross section 95 mm²) accommodates the high welding currents that are necessary for large stud diameters. Optionally, the new guns can be equipped with integrated travel measuring system. Using this the lift adjustment couldn`t be easier. Moreover, it enables a quality monitoring by measuring and recording of stud protrusion before the weld as well as stud travel (lift, immersion depth, immersion speed and short-circuit time) during the weld. Price 8.600 Euro + VAT, negotiable, FCA Oradea, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Manufacturer: Zender, filter system cartridge filter with pneumatic filter cleaning -Inlet opening: Ø 390 mm -Outlet opening: Ø 390 mm -Note: filter unit only, without extraction fan -Quantity: 1 piece available Knedpfsy R S E Hsx Akloa -Price: per piece -Transport dimensions: 4000/1480/H1650 mm -Weight: 700 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: TEKA, filter system for extraction system -Type: ZPF9 -Cartridge filter: see photos -Inlet/Outlet: Ø640 mm / Ø640 mm -Note: A filter unit only, without a suction fan, can be supplied for an additional charge. -Dimensions: 1840/1475/H2670 mm -Weight: 689 kg Knsdpfx Ajzukp Ajklja

Condition: good (used), Inert gas welding machine with pulse function, pulse-arc welding system, MIG/MAG pulse welding system -with: 3 hose packages (1x aluminum, 1x stainless steel, 1x steel) -Max. welding power: 330 A -Equipment: remote control connection, with removable wire feed, including ground cable, gas fitting -Wire feed: 4-roller drive Kedpfxjd I U Dwe Akljna -Cooling: Water-cooled -Dimensions: 655/900/H1490 mm -Weight: 160 kg

Condition: used, Year of construction: 2024, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 241118-5470, type of input current: three-phase, total height: 1,050 mm, total width: 690 mm, total length: 1,020 mm, input voltage: 400 V, overall weight: 215 kg, warranty duration: 11 months, type of cooling: water, electrical fuse: 25 A, laser power: 2,000 W, input frequency: 50 Hz, laser wavelength: 1,080 nm, Equipment: CE marking, documentation/manual, type plate available, For sale: FANTECH LWG 4.0 EXPERT 2000W handheld laser welding machine, manufactured in 2024 and only lightly used since July 2025. 3 in 1 machine - welding, cutting, cleaning. Kedpfx Aszvalisklsna Should you have any questions or need additional information, please feel free to contact us by message or phone. We will be happy to assist you.