Used Żefam Dsxb-40 for sale (21,799)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions Gedpfx Aljzlkgco Aeud The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: good (used), Year of construction: 2019, operating hours: 4,996 h, load capacity: 4,000 kg, lifting height: 5,080 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, empty load weight: 7,200 kg, mileage: 4,996 km, Electric three-wheel forklift Brand: Still (Germany) Year of manufacture: 2019 Operating hours: 4,996 Capacity: 4,000 kg Lifting height: 5,080 mm Mast height (closed): 2,500 mm Equipped with: FREELIFT and SIDESHIFT Gjdpfey U Iccsx Al Asud Fork spreader Fork length: 1,200 mm Battery: with charger

Condition: new, “Partially unpacked for photography – unused item from a warehouse clearance.” Ball screw drive Z-axis formerly SAP 13000024209 13:40 551/11 00000 STEINMEYER Gjdpfx Ajzh Auwsl Ajud

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, segment jaws Gsdpfx Alszhuw De Asud -Manufacturer: Schunk, soft attachment jaws, 4 sets = 12 pieces -Type: SWB-200 -Dimensions: see photo technical drawing -Submission/Price: complete -Transport dimensions: 240/180/H60 mm -Weight: 16.3 kg

Condition: excellent (used), Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley, running trolley, trolley, trolley, monorail trolley, pantograph trolley, cable trolley -Manufacturer: Vahle, pantograph wagon Godpezht Diofx Al Asud -Type: SWN 4/40 HS -Item No.: Dimensions: see photos -Number: 5x pantograph cars available - Price: per piece -Dimensions: 200/55/H130 mm -Weight: 0.5 kg/pc.

Condition: excellent (used), Year of construction: 1988, Drilling capacity in steel (diameter) 40 mm Overhang 1,250 mm Spindle mount MK 5 Guedpozgdfbofx Al Aed Drilling spindle stroke 355 mm Speed range 20 – 1200 rpm Machine weight approx. 3.0 t

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Including metal struts to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Guodpfxjzh Htws Al Asd Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Climate chambers Type: EXCAL 1413-HA Air-cooled climate chamber EXCAL is equipped with a 15-inch capacitive multi-touch panel PC, SSD storage, Windows 7, and 2 USB ports. This makes it state-of-the-art. Technical data: Test chamber dimensions: Width 550 mm x Depth 500 mm x Height 500 mm Housing dimensions: Width 820 mm x Depth 1375 mm x Height 1730 mm Window 350 x 380 Volume: 138 liters Feedthrough installed as standard R1: 80 mm ∅ L1: 80 mm ∅ Data for temperature tests: Temperature range: -40°C to +180°C Temperature deviation over time ± 0.1 to ± 0.3 K Temperature homogeneity spatially ± 0.5 to ± 1.8 K Temperature change rate Heating: 15 K/min Gedpfozh D Rtjx Al Aoud Cooling: 10 K/min Data for climate tests: Temperature range +10 to +90 °C Humidity range 10 to 98 % RH Data for operation: 3/N/Ph+T 400V ±10% 50 Hz Rated power 9.8 kVA Refrigerant R-404A / R-23 Weight: 430 kg For your peace of mind as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2008, operating hours: 11,507 h, lifting height: 4,040 mm, fuel type: diesel, mast type: duplex, fork length: 1,100 mm, fork width: 1,150 mm, total height: 2,690 mm, total length: 3,000 mm, total width: 1,450 mm, color: orange, Empty weight: 6.900 kg Lifting capacity: 4.000 kg - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30419 - Operating hours: 11507 - Lifting capacity: 4000kg - Lifting height: 4040mm Gusdpfozh U Ucex Al Aod - Overhead clearance: 2690mm - Fork length: 1100mm - Maximum fork width: 1150mm - Minimum fork width: 790mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Half cabin - Mast: Duplex - Drive: Diesel - Motor brand: Toyota - Transport dimensions: 3000mm x 1450mm x 2690mm (l x w x h) - Transport weight [kg]: 6900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Gear motor, electric motor Godpfod Al Hwox Al Asud -Speed: 40/80 rpm -Power: 0.7/0.91 kW -Construction: B5 -Shaft diameter: Ø 48 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 685/240/H320 mm -Weight: 60 kg

Condition: used, Pneumatic cylinder, air cylinder, standard cylinder Gjdpfx Alsd S Aqfo Asud -Guide unit with: pneumatic cylinder -Pneumatic cylinder stroke: 200 mm -Guide unit type: FEN-40-0320 -Dimensions: 495/115/H58 mm -Weight: 5 kg

Condition: used, Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool Gsdpfxec U T Ads Al Aeud -Number: 5x spindle tools -Adjustment: SK50 -different shaft sizes: 22/25/30/40 mm -Price: complete -Weight: 19.2 kg

Condition: used, Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger Gjdpfxsdfgk Te Al Aeud -Stuffing box: for Ø 40 mm shaft -for gland tape -conical socket suitable for high pressure -Number: 1x glands available -Price: per piece -Dimensions: 160/160/H103 mm -Weight: 3 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor Gjdpfechk I Hox Al Aeud -Speed: 40 rpm -Power: 1.5 kW -Construction: B3 -Diameter shaft: 48 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 670/240/H280 mm -Weight: 50 kg

Condition: used, Tube expander, spindle, splined shaft -Splined shaft: mounting shaft O 45 mm Gsdehmc Axspfx Al Aeud -Wedge: outer diameter 40/49/58 mm splined shaft cone adjustable -Dimensions: see techn. Drawing with the photos -Dimensions: O 98 x 370 mm -Weight: 5.5 kg

Condition: used, Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Prisms: 90° -2x thread: M16 -Price: per piece Gusdpfx Alefgwvyo Asd -Number: 2 pieces -Dimensions: 250/40/H115 mm -Weight: 6.2 kg/piece

Condition: used, Test pump, pressure test device, measuring device, pressure test pump Gsdpfx Aljfnaaio Aoud -Manufacturer: Junginger, mobile extraction device -Pressure display: 40 bar -Dimensions: 790/480/H775 mm -Weight: 47 kg

Condition: used, Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 300 mm -Piston diameter: 40 mm -Piston rod: 16 mm Gujdpfxjfbmbcs Al Ajd -Dimensions: 467/53/H53 mm -Weight: 2.25 kg

Condition: used, Three-phase motor, electric motor -Power: 40 kW -Speed: 1455 rpm -Shaft: Ø 60 mm -Construction: B3 -Protection class: IP 23 -Dimensions: 860/640/H580 mm -Weight: 390 kg Gjdscu Ervepfx Al Asud

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump -Electric motor SIDO type: D160L-84 -Motor power: 7.5/12 kW -Speed: 720/1435 rpm -Hydraulic pump Sperry Vickers type: GC4/40/3/10 -Max. Pressure: bar -Dimensions: 960/400/H520 mm Guodpfxsc Il Dwj Al Ajd -Weight: 242 kg

Condition: used, moving point, moving center point, moving Morse taper, moving Gedpfoc S D H Aox Al Aoud -Center point: 40 mm -barrel tip: shaft-mounted -Recording: MK5 -Number: 2x tips available -Price: per piece -Weight: 4.7 kg

Condition: used, Roof window roller shutters, blinds, roller shutter curtains, blind profiles -different profiles -Frontal 40: Kit Maniglia Alta -Measurements see: photos/piece lot -Sale: complete Gusdpfed Tgavox Al Ajd -Dimensions: 2800/1150/H550 mm -Weight: 188 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool Guodpfjfckfhsx Al Ajd -Tool for: press brake -Tool for: closing folds -Recording: 25 mm -Drawing: in the photos -Dimension: 40 x 130 mm -Length: 495 mm -Weight: 12.5 kg

Condition: used, Gear motor, electric motor -Gearbox manufacturer: SEW -Engine manufacturer: SEW -Speed: 20/40 rpm -Power: 0.55/0.66 kW -Construction: B3 -Diameter shaft: Ø 35 mm -Protection class: -Price: per piece Gjdpfx Alockbfue Ajud -Number: 7x available -Dimensions: -Weight: 53 kg

Condition: used, Gear motor electric motor Electric gear motor -Speed: 40 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 32 mm Guedpsckd Ekefx Al Asd -Protection class: IP 44 -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 26 kg