Used A.m. Dryer for sale (2,232)

Condition: used, Year of construction: 1987, Compressor Make : Ingersol Rand Isdpfx Ajy Spnuscreth Type : Centac C60Mx2 Centrifugal Original YOC : 1987 Our supplier bought the mc in 1997, fully reconditioned from Ingersol Rand in Belgium , only used for 2 years in 1 shift, thereafter serviced & stored . User was Picanol demo project in Belgium. See below pictures to see condition & completeness of the unit. Air dryer Hiross MDA65 is included in the package. Intake Pressure : 98 kPa Intake Temperature : 15 °C Relative Humidity : 60% Delivered Capacity : 61 m3/min Discharge Pressure : 800 kPa Cooling water temp : 15 °C Cooling water flow : 450 l/min Rated speed : 2970 n/min Motor rating : 430 kW

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Itedpfx Acov Si Szerjh Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, ALTO Encore L 2426 Shower suction machine / 24 VDC / 75A / IPX 3 / Weight 395 kg Ijdpfjg Ngmxox Acrsth

Condition: excellent (used), Year of construction: 2010, INGERSOLL RAND Refrigerated Air Dryer Capacity: 13 m³/min, Year of manufacture: 2010, The dryer is fully operational. Iedpfx Acjiuk D Dereth

Condition: used, UV dryer Itodpfsv Sauaex Acreh Comes from ongoing production

Condition: good (used), power: 120 kW (163.15 HP), control type: PLC-controlled, For Sale: Complete 120 kW Industrial Pellet/Bio-Heating Container A powerful and turnkey heating solution. This package combines a high-capacity boiler with a professional 95–120 kW EcoTec B3 burner system, all pre-installed in a weatherproof container. Ideal for farms, large properties, or industrial facilities. Technical Specifications (Model 120) Designed for heavy-duty operation with the following features: Boiler & Performance - Nominal Output: 120 kW - Burner: EcoTec B3 (95 kW nominal / compatible with 120 kW boiler) - Dry Weight: 1030 kg - Water Capacity: 450 l - Max Operating Pressure: 1.5 bar - Max Operating Temperature: 110°C - Material Thickness: 6 mm (fire surfaces and water jacket) Physical Dimensions - External Dimensions: 1485 mm (Depth) x 930 mm (Width) x 1410 mm (Height) - Firebox Size: 650 x 650 x 1030 mm (Volume: 480 l) - Container: Approx. 10 ft, blue, including chimney stack and external fuel loading port Fuel & Chimney Requirements - Fuel: Wood pellets / biofuel (compatible with underfeed firing technology) - Chimney Outlet: 1060 mm from floor, 160 x 220 mm flue size - Chimney Recommendations: - Fuel with moisture < 20%: Ø 220 mm / 8 m height Ijdpfx Acey Eipfjrjth - Fuel with moisture > 20%: Ø 250 mm / 10 m height Key Features - Turnkey Solution: No boiler room required. 10 ft container is fully preinstalled and “plug-and-play” – simply connect to your heating system and supply power. - Professional Automation: Fitted with a Unitronics Vision230™ PLC controller and an intuitive control panel (main switch, pump control, fault reset, and emergency stop). - Robust Construction: Heavy-duty Swedish engineering by Sahlins EcoTec AB (2007). 6 mm steel ensures a long operational life. - Large Fuel Silo: Integrated, internal V-shaped bunker with heavy-duty feed auger for extended autonomous operation. - Connections: 50 NS flow/return and expansion, 20 NS thermostat, and 2x 50 NS electric heater connections. Sales Information - Condition: Meticulously maintained, complete working unit. This is a unique opportunity to acquire a high-output, mobile heating plant at a fraction of the price of a new system.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 250 h, functionality: fully functional, As-new drying chamber, fully functional, immediately available Isdpfx Asy Ny U Tocrjth

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 13/15, Equipment: documentation/manual, DRYER FOR FRESH PASTA, FRUIT, NUTS ESC100 Dryer that allows the wrapping, pre-dressing and drying of short, long and stuffed pasta, as well as the drying of pasteurized pastes before a possible packaging. Capacity for drying cycle: 100 kg approx Panels injected with hot injected polyurethane foam, with high thermal stability, in white pre-painted sheet Electric heaters for air heating (1,2 Kw x 3 = 3,6 Kw) Itjdetrd N Eopfx Acreh 500 mm axial fan for forced air circulation (1 Kw approx.) Electrical panel with PLC board for setting and checking drying phases N ° 2 Butterfly valves controlled by Belimo electric actuator Probe for internal humidity control Instrumentation for checking drying and temperature times controlled by an EC-compliant electrical panel with programmable digital electronic card N ° 25 frames in fir wood 600 x 1200 mm, with polyester mesh and aluminum sealing bars N ° 1 Stainless steel trolley on wheels Technical data Voltage: 400 V – Three-phase Total power: about 5 Kw Dimensions Depth: 1000 mm (+ 300 mm above the door) Width: 1670 mm Height: 2260 mm (+ 400 mm humidity extractors)

Condition: used, Year of construction: 2018, Fully functional Spanish (RECALOR) sawdust dryer Iedpfxjv Rfuve Acroth Chip quantity at dryer outlet approx. 12,000 kg/h (10% w.b.) Selling because we built a more efficient one

Condition: good (used), Year of construction: 2010, The device has been well maintained. Comp. air Pmax: 13 bar Refr. Pmax High: 18.7 bar Electrical connection values: 230 V / 50Hz, Kw 1 Ph Width: 460 mm Iedpfxsvmqkho Acrjth Depth: 500 mm Height: 830 mm Weight: 60 kg

Condition: used, Year of construction: 2005, inner dimension length: 14,000 mm, inner dimension width: 1,250 mm, inner dimension height: 1,850 mm, total length: 15,900 mm, total width: 2,500 mm, total height: 3,000 mm, overall weight: 12,000 kg, Equipment: CE marking, No. 3262 Vacuum dryer / drying chamber Kronseder KCT 2400 Used, year of construction 2005 The machine was in operation until 2024 and remains connected to electricity and hot water until July 2026 Capacity approx. 32 m3 Heating via hot water Stainless steel chamber Chamber diameter approx. 2000 mm External length of chamber approx. 15000 mm Internal length of chamber approx. 14000 mm Width of wood stack 1250 mm Height of wood stack 1850 mm Transport dimensions approx. 15900 x 2500 x 3000 mm LWH Weight approx. 12000 kg Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Isdpjyy R D Tofx Acrjth Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. Iedpjr A El Esfx Acrsth The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. "Loose adhesion on the lower part of the dished end" (pictures to follow)

Condition: as good as new (ex-display), Year of construction: 2016, operating hours: 10 h, functionality: fully functional, type of input current: AC, volume flow: 12,000 m³/h, total width: 3,000 mm, total length: 3,700 mm, total height: 3,650 mm, overall weight: 5,600 kg, operating pressure: 16 bar, pressure dew point: 2 °C, ambient temperature (max.): 45 °C, ambient temperature (min.): 2 °C, type of cooling: water, A compressed air refrigeration dryer consisting of 2 DFLO 1200 W units. The dryer has only been operated for a few hours on a test bench. Afterwards, it was repacked in its original packaging and stored in dry conditions. Volume flow rate: 12,000 m³/hour Min. / max. operating pressure: 2 - 16 bar Test bench operating pressure during last application: 1.4 to 2.3 bar Inlet diameter: 1x DN 200 Outlet diameter: 1x DN 200 The dryer features a second overpressure outlet DN 100 with Samson pressure regulator. Min. / max. compressed air temperature: +2°C to +55°C Min. / max. ambient temperature: +2°C to +45°C Cooling water requirement: 14.3 m³/h Cooling water connection: 2" Refrigerant: R407C Refrigerant charge: 24 kg Installed electrical power: 29 kW Power consumption: 18 kW Wooden crate dimensions: Length: 3700 mm Width: 3000 mm Itodpfsw Dppvox Acreh Height: 3650 mm Weight: 5600 kg

Condition: used, Year of construction: 2003, volume flow: 283 m³/h, total width: 1,183 mm, total length: 1,200 mm, total height: 2,073 mm, pressure: 7 bar, overall weight: 605 kg, pressure dew point: -40 °C, pressure (max.): 16 bar, Equipment: type plate available, 1 heatless adsorption dryer Manufacturer: Kaeser Type: DC47E Flow rate: 283 m³/hour (4.72 m³/minute) Pressure dew point: -40°C Inlet temperature: 35°C Ijdpfx Aov T Tw Rjcroth Outlet temperature: 35°C Operating pressure: 7 bar Max. operating pressure: 16 bar Compressed air connection: DN25 (R1") Adsorbent: activated aluminum oxide Vessel capacity: 133 liters Filling weight: 60 kg Dimensions: Height: 2073 mm Width: 1183 mm Depth: 1200 mm Weight: 605 kg

Condition: ready for operation (used), Year of construction: 1995, A used compressed air refrigeration dryer. The refrigeration dryer was checked for function by refrigeration engineer before decommissioning. He then extracted and disposed of the 18 kg of R22 refrigerant ( 2 bottles). All protocols available. Afterwards a small amount of nitrogen was filled in. Gladly we can let them fill the dryer with new refrigerant ( for example R407C ). !! Selling price is without refrigerant !!! Manufacturer: Sabroe Model: SV 1010 AB Type: 50 A max. volume flow: 55m³/min (3340 m³/h) pressure drop at max. volume flow: 0,38 bar Weight of refrigerant: 18 kg ( actual without refrigerant) Max. pressure refrigerant side: 16/ 25 bar Air connection: DN 100 Condensate drain: Beko 2x 3/4 inch max. pressure compressed air side: 16 bar max. volume flow max. temperature: compressed air: 60°C power consumption with fans: 7,1 kW voltage: 400Volt size width/ depth/ height: 1880mm / 1100mm / 2000mm weight: 835 kg Itsdpfofy Trhox Acrjh

Year of construction: 2025, operating hours: 150 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 103, This is prototype of the 570 series model, it has been completely refurbished. It has 96 trays at 60x40 cm and full temperature control on each tray. It has an extraction capacity of 25kg/hr. The machine will be delivered and mounted on location including one week of introduction by out technician. Itedsyut Hxepfx Acrjh

Condition: used, Year of construction: 1996, functionality: fully functional, overall weight: 1,750 kg, total width: 1,120 mm, total length: 3,750 mm, number of chambers: 1, Equipment: documentation/manual, For sale: a high-performance fluid bed dryer from the renowned manufacturer Buhler, model OTWG-280. This is a horizontally constructed machine designed for the continuous thermal processing of bulk and granular materials. With its sectional design, the machine can function both as a dryer and a cooler, making it an extremely versatile element of any production line. Isdjy D Iiujpfx Acreth The machine utilizes the principle of fluidization. The process involves blowing hot (or cold) air through a perforated base holding the raw material. The air lifts the material particles, forming a so-called "fluidized bed." In this state, each particle is surrounded on all sides by the heating/cooling medium, providing: - Instant heat exchange (significantly faster than drum dryers) - Uniform drying with no risk of localized overheating - Gentle product handling – minimal risk of mechanical damage to raw materials We have two OTWG 280 units and one OTWG 90 unit available. The price for the OTWG 280 is listed in the advertisement. OTWG 90 price: 40,000 EUR.

Condition: excellent (used), Gas Cylinder Dryer / Infrared Heating Unit for Gas Bottles (Nitrogen, CO2 etc.) For sale is a professional gas cylinder drying unit with infrared heating, e.g. for nitrogen or other industrial gas cylinders. The system consists of a large insulated stainless‑steel drying cabinet with infrared heaters, a separate control cabinet and a loading ramp. Features / Equipment: Drying system for several gas cylinders at the same time (industrial design) Infrared heating with OSRAM THERATHERM 250 W emitters Insulated stainless‑steel housing with reflective inner lining Solid base frame with transport frame / rollers Separate electrical control cabinet including: Temperature controller Ammeters for heating circuits Hour counters (heating rods / lamps) Drying phase counter Push buttons incl.: bottle drying ON/OFF, Start/Stop, heating phase ON, vacuum/underpressure, valves, emptying, reset Itsdpfx Ajy Nkqxocrsh Main switch Upper pipe manifold with several gas / vacuum connections and valves Aluminium loading ramp for moving cylinders into the unit The unit was used in an industrial environment. If you are interested or need more details, please send me a message.

Condition: used, Year of construction: 2019, Format: 2000 x 950 mm Equipment: Electric Modular Dryer Forced Hot Air System dimension 3800 x 1250 x 2170 mm POWER 15 kW 27 A weight 650 KG Ijdpfx Ajyzruiocreth

Condition: excellent (used), For painting-finishing line (Ultra - Violet rays system) Max working width mm 1300 Total machine lenght: mm 2900 (ca.) Workpieces thickness (working height): mm 0 - 80 (ca.) Iodsgz Svnjpfx Acrjth Adjustable feeding speed: m/min 0 - 40 (ca.) PLC control panel (Touch Screen) Built-in electric and command panel Total installed power KW 36.9 Equipped with: No. 2 U.V. lamps Motorized feeding system by metal rods runned with two side-chains In-feed suction system (to take in the air) Out-feed suction system (to take away the solvent fumes)

Condition: excellent (used), For painting-finishing line (Ultra - Violet rays system) Max working width mm 1300 Total machine lenght: mm 4000 (ca.) Workpieces thickness (working height): mm 0 - 80 (ca.) Adjustable feeding speed: m/min 0 - 40 (ca.) PLC control panel (Touch Screen) Built-in electric and command panel Total installed power KW 54.9 Equipped with: No. 3 U.V. lamps Motorized feeding system by metal rods runned with two side-chains In-feed suction system (to take in the air) Out-feed suction system (to take away the solvent fumes) Itsdegz Svgjpfx Acreh

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, overall weight: 1,100 kg, total length: 6,200 mm, total width: 1,000 mm, total height: 1,900 mm, loading space length: 4,500 mm, loading space width: 800 mm, loading space height: 600 mm, tank capacity: 2,100 l, KIT 250 For joiners, carpenters, musical instrument manufacturers, woodturning shops with 1.5 - 2.5 cubic meters of wood stacking space and a stack width of 0.80 m - 1.00 m. Iodpfxetqlp Rj Acreth The energy-saving system works according to the principle of conventional drying with a supply air flap and an exhaust air flap. an exhaust air flap. The vacuum pump is used for rapid dehumidification.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,850 kg, total length: 6,000 mm, total width: 1,700 mm, total height: 1,900 mm, loading space length: 5,300 mm, loading space width: 900 mm, loading space height: 1,100 mm, energy consumption: 3 kWh, tank capacity: 5,200 l, Test dryer EUROVAC vacuum dryer KVT 550 For further information please contact us. Itsdpfx Acotqlqasrsh

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total length: 1,010 mm, total width: 1,010 mm, total height: 2,010 mm, mesh size: 10 mm, Equipment: CE marking, Our client in Vilnius, Lithuania currently offers 7 complete sets of drying trolleys with trays available from stock. Can be sent one set at a time. Full manufacturer warranty is provided by HySpriz. Ijdpfx Aorftxfecrsth This is an ideal trolley solution for drying products such as jerky, kabanos, fish snacks, and pet sticks. It is also suitable for fish defrosting processes and even baking applications. The mesh structure ensures excellent air convection through all product levels, resulting in uniform drying and stable product quality. We manufacture in Ukraine a heavy-duty stainless steel drying trolley, specifically designed for industrial and semi-industrial production of meat and fish snacks, raw-cured sausages, jerky, and pet treats. The trolley is fully compatible with RK50U, SAS200, and FARS200 systems and is ideal for use in drying chambers, smokehouses, and climate-controlled environments with air dehumidification. The external dimensions of the trolley are 2000 × 1010 × 1010 mm. The frame is made of corrosion-resistant AISI 304 stainless steel using a robust 40 × 40 × 1.3 mm profile. It includes 30 levels with a 55 mm spacing between tiers and special locking systems to prevent trays from falling during movement. For mobility, the trolley is equipped with six heavy-duty pendulum swivel casters (Ø125 mm), allowing full rotation even when loaded. Each trolley includes 60 stainless steel trays sized 900 × 500 mm. The trays are made of corrugated stainless steel mesh, 5x5 mm. can be optionally equipped with Teflon liners (5,8 EUR/pcs) Wire thickness is 0.7 mm for high rigidity. Each tray has a 15 mm perimeter rim for improved airflow and heat distribution. Reusable non-stick Teflon inserts are included, ideal for sticky or soft products. Total load capacity is up to 400 kg per trolley, with up to 7 kg per tray. The system supports both low-temperature dehydration and high-temperature processing. Compatible with chambers using horizontal or vertical airflow. Designed for easy cleaning, hygiene, and long service life. This trolley ensures efficient moisture removal and uniform air distribution, which directly improves drying performance and final product shelf life.

Condition: good (used), Year of construction: 2013, functionality: fully functional, volume flow: 0.85 m³/h, total width: 630 mm, total length: 484 mm, total height: 779 mm, overall weight: 80 kg, pressure dew point: 3 °C, input voltage: 230 V, ambient temperature (max.): 43 °C, ambient temperature (min.): 3 °C, type of cooling: air, power: 0.29 kW (0.39 HP), input frequency: 50 Hz, Equipment: type plate available, KAESER Refrigeration Dryer SECOTEC TA 8 – Year of Manufacture 2013 – Recently Serviced For sale is a reliable refrigeration dryer TA 8, ideal for compressed air treatment in workshops or industrial settings. The dryer was manufactured in 2013 and has recently undergone a complete service by a KAESER partner – technically flawless and immediately ready for operation. Technical Data: * Volume flow: 0.85 m³/min * Pressure dew point: +3 °C * Operating pressure range: 3 – 16 bar * Pressure drop: 0.14 bar * Refrigerant: R134a Iodpfxjy H Amys Acroth * Connection: G 3/4 * Power supply: 230 V / 1 phase / 50 Hz * Ambient temperature: +3 °C to +43 °C * Dimensions (W x D x H): 630 x 484 x 779 mm * Weight: approx. 80 kg Energy consumption: * 0.27 kW at 100% load * 0.15 kW at 50% load * 0.04 kW at 10% load Condition: Used, well-maintained, fully operational – in very good condition thanks to recent servicing. The price includes VAT, and VAT is itemised. Inspection by appointment possible. If interested, please get in touch!