Used Abc 16Vdzc-1000 for sale (8,263)

Condition: used, Year of construction: 2001, turning diameter 500 mm turning length 1000 mm control MONFORTS CONTROL control SYSTEM EURO TURN turning diameter over bed slide 290 mm spindle bore 70 mm spindle turning speed range 3 - 2800 U/min Ncjdpjy Nnw Aofx Aqvjt spindle power 15 kW max. torque on the spindle 1530 Nm spindle head DIN 55027 Gr. 8 feed power X/Z axis 11300 N rapid travel - longitudinal/face 10 / 5 m/min bed width 360 mm travel of cross-slide 265 mm upper slide travel 140 mm turning tool - shaft cross cut 32 x 25 mm tailstock quill diameter 80 mm tailstock quill stroke 160 mm tailstock taper MT 5 weight of the machine ca. 3,1 t Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant

Condition: used, Year of construction: 2001, Manufacturer: SCHULER SMG, Model: HZPU-T 1000-2500/2100, Year: 2001, Serial No.: 7.5592, Press force: 1,000 t, Die change table 2,500 x 2,100 mm, Ram surface 2,500 x 2,100 mm, Max. ram stroke: 1,300 mm, Table draw cushion force: 30–200 t, Draw cushion stroke: 300 mm, Press control with Siemens Simatic OP 37 HMI, Control and switch cabinets. +++ Attention: Machine is part of an online auction! +++ Nedpfx Aqsx Ry Ntovoct

Condition: new, Year of construction: 2025, pressure 1000 t distance between columns 4250 mm stroke 400 mm Control SIEMENS S7-1500F table dimension - longitudinal 4000 mm table dimension - cross 1600 mm total power requirement 200 kW weight of the machine ca. 250 t Nedpfxeym D E Ae Aqvjct dimensions of the machine ca. 7,5 x 4,8 x 7,4 m

Year of construction: 2018, condition: like new (used), functionality: fully functional, machine/vehicle number: B24271F/01, Working length: 3000 mm Working width: 1000 mm Adhesive thickness: 20 – 100 mm Number of levels: 3 Manual rotation Pressure applied by single-sided hydraulic cylinder Number of rollers per level: 6 Pressure rollers are fixed Roller type: Ø 40 x 150 mm Ncjdpjy Rruusfx Aqvot Specific pressure: 6 kg/cm² Number of hold-downs per level: 3 Each hold-down equipped with pneumatic cylinder Pneumatic cylinder type: Ø 50 x 75 mm Each hold-down has its own air inlet/outlet valve Pressure control via regulator Hydraulic unit Pump flow rate: 5.8 l/min Hydraulic motor output: 2.5 kW Hydraulic motor max. pressure: 30 – 160 bar Storage place for the hold-downs

Condition: good (used), Year of construction: 2002, Technical Details : Nodpfjkuy Sbex Aqvsct - Year - 2002 - Capacity - 20m2/h - max. width of mesh - 1000mm - Wire diameter range - 2mm - 5 mm Line includes : - Mechanical wire pay of - Crimping machine - Weaving looms machine with hydraulick agregat

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 570 mm, controller manufacturer: FANUC, controller model: Series Oi-MC, total height: 2,800 mm, total width: 2,900 mm, table load: 800 kg, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, tool weight: 8,000 g, product length (max.): 3,300 mm, number of axes: 3, This 3-axis FERMAT VMF 1000 vertical machining centre was manufactured in 2008. It features a table size of 1300 x 600 mm and a maximum table load capacity of 800 kg. The machine offers impressive X, Y, and Z-axis travels of 1000 mm, 600 mm, and 570 mm, respectively. If you are looking to get high-quality machining capabilities, consider the FERMAT VMF 1000 machine we have for sale. Contact us for further details. • Table dimensions: 1300 x 600 mm • Distance table to floor: 880 mm • T-slots (width x pitch x number): 16 x 86 x 5 mm • Spindle bearing inner diameter: 70 mm • Distance table to spindle: 115–685 mm • Main motor power: 11/15 kW (Standard), 12/16 kW (Standard), 15/18.5 kW (Optional) • X/Y/Z ball screw: Ø40 x P12 x C3 • Drive type: Direct • XYZ rapid traverse: 24 m/min • XYZ max. working feed: 10 m/min • X-axis guideway (W x T x D): 80 x 35 x 460 mm • Y-axis guideway (W x T x D): 110 x 35 x 600 mm • Z-axis guideway (W x T x D): 80 x 35 x 300 mm • Tool shank: ISO 40 • Tool change time (tool to tool): 4 sec • Magazine pocket pitch: 76.2 mm • Max. tool length: 300 mm • Positioning accuracy: ±0.005/300 mm • Repeatability: 0.005 mm • Compressed air pressure: 6 bar Nedsy Nmr Sepfx Aqvjct • Total power requirement: 35 kVA Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, controller manufacturer: OKUMA, number of axes: 4, This 4-axis Okuma LU15 M-2SC 1000 was manufactured in 1998. It features two tool turrets, live tooling with C-axis capabilities, and synchronous tapping for enhanced productivity. The machine includes an integrated tool setter for precise measurements and a programmable tailstock for versatility. If you are looking to get high-quality turning capabilities, consider the Okuma LU15 M-2SC 1000 horizontal turning machine we have for sale. Contact us for further details. • Longitudinal Travel (X): 1020 / 995 mm • Cross Travel (Z): 260 / 140 mm • Turning Range: 340 mm • Swing Diameter over Bed Cover: 530 mm • Swing Diameter over Cross Slide: 380 mm • Spindle Nose: ASA-A2 / DIN 55026 Gr. 6 • Spindle Bore: 62 mm • Spindle Diameter in Front Bearing: 100 mm • Chuck Diameter: 200 mm • Main Drive: Motor spindle (hollow shaft motor) frequency-regulated 60% ED • Power (Main Drive): 22 kW • Max Torque: 412 Nm • Speed Range: 45 - 4,500 rpm • Speed Levels (Electrical): 2 • Feed Drive: AC servo motors, digitally regulated • Feed Range X/Z: 0 - 1,000 mm/U • Rapid Traverse X/Z: 15 / 20 m/min • Power X, Z: 2.4/1.5 kW and 4/4 kW • Feed Force X, Z: 11/3.7 kN and 7/6.7 kN • Turrets: 2 tool turrets • Live tooling: Yes (C-axis and driven units) • Tapping: Synchronous tapping Nedpfx Aqey Nmi Djvoct • Spindle interpolation: Automatic main spindle interpolation • Tool monitoring: Wear and breakage monitoring • Tool measurement: Integrated tool setter / measuring device • Tailstock: Programmable, towable with bed slide, automatic clamping • Tailstock quill: Controllable via M-command • Draw tube bore: 55 mm (partial hollow clamping cylinder) • Interface: DNC Interface RS-232C • Cooling system: Reinforced pump (8 bar at 30 l/min) • Programming: ONE TOUCH Dialog-NC (automatic work plan generation) Additional equipment • Chip conveyor (1,200 mm discharge height) Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Ncedpoy H Igrjfx Aqvst Main spindle motor: 11 kW Video of machine in operation available

Condition: good (used), Oil and coolant mist extractor and collector for lathe or CNC machining center, LNS brand, model WS2 1000/700. Airflow: 950 m3/h, motor power: 0.75 KW, voltage: 200-230V / three-phase (3PH) / 50-60 Hz, weight: 35 Kg, year of manufacture: 2019. Nsdpey Tmb Usfx Aqvsct

Condition: ready for operation (used), Heidenhain / Indramat ROD 1424.039B/1000 rotary encoder. 297 252-02, serial number 14433376B, used, in good condition, 100% functional, delivery as per photos. Ncsdpfey Nqbwex Aqvst

Condition: used, Year of construction: 2010, feed pressure 100-1000 bar liter capacity 10 l motor speeds: 975 total power requirement 18 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Nedey Tpl Nepfx Aqvect We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2025, Diatomite crusher & purifying machine Ncsdpsq Nx E Sefx Aqvst After purifying processing, The purity is white diatomite with SiO2 above 90%, Al2O3 below 0.04%, and Fe2O30.4 below.

Condition: used, mileage: 5,10,000 km, first registration: 01/2019, overall weight: 16,000 kg, axle configuration: 2 axles, emission class: euro6, Colour: light blue, Euro 6 engine, defective DPF!! SOLD AS IS!! Ncjdpfx Aexagf Rjqvet

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 550 mm Z-axis travel: 500 mm Clamping surface: 1,100 mm x 500 mm Rapid traverse X/Y: 36 m/min Rapid traverse Z: 30 m/min Feed rate: 24,000 mm/min Spindle speed range: 12,000 rpm Number of tools in magazine: 30 pcs Tool holder: BT 40 MACHINE DETAILS Control: Fanuc 0i EQUIPMENT Chip conveyor Ncsdpsy Iztuefx Aqvjt Internal coolant supply HWACHEON Automatic Workpiece Changer Magazine capacity: 8 pallets Max. workpiece size, rectangular: 420 x 170 mm Max. workpiece size, round: 300 mm diameter

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 102848, functionality: fully functional, operating hours: 3,142 h, empty load weight: 5,000 kg, feed rate X-axis: 33 m/min, number of spindles: 7, TECHNICAL DETAILS Number of spindles: 7 Spindle 1 - Spindle type: Bottom - Motor power: 15 kW - Tooling: Yes Spindle 2 - Spindle type: Right - Motor power: 11 kW - Tooling: Yes Spindle 3 - Spindle type: Left Ncjdjy Nyb Hspfx Aqvst - Motor power: 11 kW - Tooling: Yes Spindle 4 - Spindle type: Top - Motor power: 22 kW - Tooling: Yes Spindle 5 - Spindle type: Bottom - Motor power: 15 kW - Tooling: Yes Spindle 6 - Spindle type: Top - Motor power: 30 kW - Tooling: Yes Spindle 7 - Spindle type: Bottom - Motor power: 15 kW Minimum planing width: 20 mm Maximum planing width: 300 mm Minimum planing height: 3 mm Maximum planing height: 160 mm Infeed table length: 1,000 mm Feed roller diameter: 140 mm Extraction nozzle diameter: 160 mm Feed speed: Manual Minimum feed speed: 5 m/min Maximum feed speed: 33 m/min Feed speed regulation: Infinitely variable MACHINE DETAILS Voltage: 400 V Current consumption: 278 A Circuit breaker: 400 A Power: 128 kW Dimensions & weight Dimensions (L x W x H): 5,500 x 2,400 x 2,100 mm Net weight: 5,000 kg Operating hours: 3,142 h EQUIPMENT Driven rollers in the table Powerlock Cutterhead drive: Cardan shaft drive Lubrication system: Automatic

Condition: good (used), Year of construction: 2011, Lifting capacity: 1000 kg Ncjdpfjy S S Nhox Aqvst Unit with safety grille Width: 5300 mm Height: 2900 mm Depth: 500 mm Net weight: 308 kg

Condition: new, How does it work? The magazine is manually fed with deck boards and stringer boards, then the machine automatically organizes the decks in the right position for nailing. The machine is constructed for continuous and reliable production of pallets. It combines professional precision with a user-friendly setup. The size of the manufactured pallets can be easily readjusted in just a few minutes. Deck Size: Min / max length: 600 mm - 1 600 mm Min / max width: 600 mm - 1 400 mm Stringer Min / max length: 600 mm - 1 400 mm Min / max width: 75 mm - 150 mm Min / max thickness: 16 mm - 28 mm Min / max wing: -20mm - +50mm Deck board Min / max length: 600 mm - 1 600 mm Min / max width: 75 mm - 150 mm Min / max Thickness: 16mm - 28mm Specifications: Operators | 1 Length | 4,0 m Width I 3 m excluding platform ladder Height | 3,6 m Power | Electric: 14 kW, 3x400 V+N, Hydraulic: 22 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 400L/min Should be filled and controlled | Container for lubricating oil Machine capacity | 24 deck boards/min Standard equipment: 2 cassettes for deck boards 3 channels for stringer feeding 3 cassettes for stringer 1 mechanical clinching plate Nailing system: Electric or hydraulic beam nailing, 1 nail box (9 nails), Individual nail picking, nail indication system, 9 nailing hammerheads Nsdpfx Aowdurpoqvjct Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: new, Semi-automated nailing machine for production of complete pallets in two steps. How does it work? Blocks and leg boards are fed manually in the left fixture. The machine nails the parts together automatically. The ready-made legs are moved by hand to the right fixture, where deck boards are manually placed on top of the legs and nailed together automatically. Both fixtures run simultaneously. The machine starts by pushing a button and the finished pallets are manually pushed out in the back of the machine. Mychrome has various additional machinery that can easily be docked on to existing machines in order to build a longer line where more stages can be automated. The possibility to modify the design and the size of the pallets is still available with the additional machinery. Pallet size: Min / max length of deck & legs: 600 mm - 1 600 mm Min / max width of deck: 600 mm - 1 300 mm Specifications: Operators | 2 Length | 3,5 m Height | 3,6 m Power | 14 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 300L/min Ncjdpol Awy Dofx Aqvjt Should be filled and controlled | Container for lubricating oil Machine capacity | 500 pallets/8h Standard equipment: 1 channel for legs 1 channel for pallet assembly 1 pallet matrix interchangeable 1 leg matrix adjustable Operators terminal for production control Program for saving nail positioning Nailing System | Hydraulic beam nailing, 3 nail boxes, 30 nailing hammerheads

Condition: new, Semi-automated nailing machine for pallet legs. How does it work? The magazines are manually fed with blocks and boards where after the machine automatically nails the parts together. The machine is equipped with three channels for blocks and a magazine for boards. Easily adjustable It’s easy to produce various types of pallet legs with OM-1000. The machine has three channels for inserting blocks. The cassettes in the channels are changed in order to fit the size of the blocks. The cassettes are easy and fast to readjust. Mychrome has various additional machinery that can easily be docked on to existing machines in order to build a longer line where more stages can be automated. The possibility to modify the design and the size of the pallets is still available with the additional machinery. Asssembled leg size: Min / max length: 600 mm - 1 600 mm Width min / max: 16 mm - 150 mm Leg boards: Min / max length: 600 mm - 1 600 mm Width min / max: 75 mm - 150 mm Thickness: 16mm - 28mm Blocks: Material: Solid wood or pressed blocks Dimension: 70 -100mm Width: 75 -150mm Specifications Operators | 1 Length 2,0 m Width 2,5 m excluding platform ladder Height 3,6 m Power Electric: 6 kW, 3x400 V+N, Hydraulic: 15 kW, 3x400 V+N Pneumatic system 7 bar compressed dried air: 300 L/min Should be filled and controlled Container for lubricating oil Machine capacity 12 legs/min Standard equipment 3 channels with motorized adjustment 3 cassettes, manually adjustable for block sizes 1 cassette, manually adjustable for board length Operators terminal for production control Nedpfewdutaex Aqvoct Program for saving nail positioning Nailing system Electric or hydraulic beam nailing 1 nail box (9 nails) 9 nailing hammerheads Individual nail picking nail indication system Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: used, Year of construction: 1996, functionality: fully functional, Manufacturer: REINBOLD (Germany) Njdpfx Aqsy Nw Idovjct Model: RHZR 1000 Type: Wood Shredder Motor: 18.5 KW Weight: 2470 kg Size: 3140 x 2265 x H 2310mm Only 300 working hours, good condition, connected, can be inspected. Rotor 250 mm with 26 knives Screw conveyor to eject chopped scraps

Condition: like new (used), functionality: fully functional, ES-1000 Spectrophotometer with bag (complete) Nodeu Ekclepfx Aqvsct

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load capacity: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Ncsdjy Tmxgepfx Aqvjt Vertical head Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Offered at EUR 2,000 – plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 190 mm, travel distance Z-axis: 350 mm, overall weight: 2,100 kg, number of axes: 2, This 2-axis Index ABC 63 was manufactured in 1999. It has a rated power of 13 kW and a machine weight of approximately 2100 kg. If you are looking to get high-quality turning capabilities, consider the Index ABC 63 horizontal turning machine we have for sale. Contact us for further details. Ncsdpjy Iwrmefx Aqvst • Mains voltage: 400 V • Control voltage: 24 V • Frequency: 50 Hz • Rated power: 13 kWThe Axis travels are approximetaly Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2008, total length: 2,060 mm, total width: 830 mm, total height: 1,180 mm, Colour: Grey Empty weight: 566 kg - Year: 2008 - Documentation available: No - CE certificate present: No - Table length [mm]: 1000 - Table width [mm]: 400 - Sanding belt width [mm]: 200 - Sanding belt length [mm]: 3200 - Extraction nozzle diameter [mm]: 120 - Conveyor belt speed [m/s]: 13 Njdpfxeywlfyo Aqvoct - Min. tilting angle [°]: 0 - Max. tilting angle [°]: 45 - Transport dimensions: 2060mm x 830mm x 1180mm (l x w x h) - Transport weight [kg]: 566kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2012, Riggs 1000 Transfer pump 2012, stainless, filling range from 125ml to 1200ml, they pump directly from cooking kettles, tote bins, mixing vessels or IBC, provide damage free transfer of hot or cold liquid, semi liquid and suspended solid products Njdpfxjy R Ei Ej Aqvsct