Used Albamat Channel Baling Presses for sale (12,814)

Condition: used, Year of construction: 1981, Technical details: pressure: 250 t slide stroke: 36...126 mm throat: 400 mm ram adjustment: 110 mm surface area of ram: 630 x 500 x 100 mm dayligth: 400 mm Table dimensions: 1000 x 750 x 100 mm table height over floor: 1000 mm Iiedpou Nfklsfx Agyjh total power requirement: 23,0 kW weight of the machine ca.: 13,5 t dimensions electric cabinet LxWxH: 1,1 x 0,7 x 1,3 m dimension machine xH: 3,0 x 1,3 x 3,3 m further details: - control via 2 hand control console or with foot pedal - foot plates Ø 220mm accessory: - column punch device *

Condition: used, Technical details: pressure: 6 t distance between columns: - mm stroke: 130 mm table surface area: 1200x550x30 mm throat: 500 mm total power requirement: 1,1 kW weight of the machine approx.: 1000 kg space requirements of the machine approx.: L:1,8xB:0,9xH:0,9 m HORIZONTAL SS - operation through keyboard - operating pressure: 10 to 600bar stepless adjustable - work piece clamping area is adjusted through manual screwing of slide-counter holding plate - sizes of counter holding plate: L: 500xW:300xH:35mm Iisdpfx Agsu Nfm Tjyoh - stroke of slide plate: 130mm - silde clamping plate: 550x300x35mm functional *

Condition: used, Technical details: pressure: 80 t Iisdju Nfnwjpfx Agyoh dayligth: 600 mm ram stroke: 200 mm pressure: 30 t dayligth: 680 mm ram stroke: 300 mm distance between columns: 1060 mm base plate surface area: 1060x600 mm table above floor: 720 mm ram stroke speed: Stößel/ Ram 1: 40 mm/sec ram stroke speed: Stößel/ Ram 2: 95 mm/sec base plate surface area: Dm=150 mm total power requirement: 13 kW weight of the machine ca.: 4,5 t space requirement approx.:: L:1,6xB:1,1xH:3,4 m - Press with two ram with 30 t + 80 t - foot control - documentation *

Year of construction: 1997, condition: used, Technical details: pressure: 250 t stroke: ca. 400 mm pass through width: 640 mm table above floor: 900 mm ram stroke speed: regulierbar/adjustable passage between the side columns: 470 mm table clamping surface LxW: 570x550 mm clamping area of ram: 570x550 mm total power requirement: 56 kW weight of the machine ca.: ca. 9,0 t dimension machine xH: 2,5x1,8x3,8 m transport dimensions LxWxH: 2,6x1,8x3,1 m - control manual and via automatic via SPS Allen Bradley - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and safety curtains installed - no CE certification available i.D. Iiedpfx Agju Nfn Rsysh *

Condition: used, Year of construction: 1991, Technical details: pressure: 40 t daylight dimension : table/slide up: 450 mm Iisdpfx Aeu Nfp Iegyeh throat: 375 mm ram stroke: max. 300 mm Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm height over floor: 900 mm total power requirement: 15,0 kW weight of the machine ca.: 5,8 t dimension machine xH: 2,3 x 1,45 x 2,40 m further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Two-hand operation and/or control panel *

Condition: used, Technical details: Pressure: 2,3 t stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg dimension machine xH: 0,6 x 0,7 x 1,6 m Iijdpsu Nfwljfx Agyeh Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition. *

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm Iijdpju N A Uusfx Agyjh - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: used, Technical details: pressure: 250 t Iijdpfxou N Ddwj Agysh stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel accessory: - foot plate 2200x1500x40mm *

Condition: new, New hydraulic high speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Ijdpfx Aef Rt Irsgyeih

Condition: good (used), Year of construction: 2025, Requirements: - Material must be free-flowing (grain size < 18 mm) - Material must be pure, with an ash content of less than 1% ATRO Note regarding: sand, stones, and minerals - Material is compacted by means of compression tongs - Material must be dry, maximum 15% ATRO New: Innovative combination of briquette and pellet Options available at an additional cost: Plant construction / mütek system technology: - mütek shredder MRZ crushing technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary valve airlock - Transport screws - Silos - Control system connections of all kinds - Semi-automatic packaging technology + 24-hour operation possible + Compact design + High energy efficiency thanks to innovative hydraulics + Briquette density of up to ≥ 1 kg/l possible *Details after testing Iijdpfx Agjfbb Aroysh Operating principle: The machine has a silo with an agitator. In each of the 4 corners of the storage silo, there is a vertical screw that compresses the material downwards into the compression chamber. The machine operates with two cylinders, each of which compresses in two directions (either while the cylinder moves forward or backward). This results in 4 briquette outlets, each with 6 individual briquettes. *ideal for the automatic feeding of the heating boiler Format Ø 30 mm Throughput of up to a maximum of 310 kg/h Motor power: approx. 29 kW (total); approx. 30% less in continuous operation Dimensions: 3.1 x 2.3 x 2.2 m Weight: 3.55 tons Your advantages: Compact briquette/pellet format enables the firing of industrial furnaces by means of screw feed Fully automatic 24-hour operation possible High energy efficiency Briquettes/pellets with consistently high quality and density For automatic feeding into industrial furnaces Small to medium quantities of wood chips, which are produced in the processing industry of various materials (especially wood, biomass, etc.), can be optimally compressed. The small Ø 30mm format represents an attractive alternative. Unlike our conventional briquettes, these can be automatically fed into industrial furnaces. In addition to wood, various other materials can also be easily processed (various biomass and agar-based materials).

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 02.056.00, overall weight: 11,000 kg, space requirement length: 2,420 mm, space requirement width: 2,040 mm, space requirement height: 3,220 mm, TECHNICAL DATA: - Pressing force (infinitely variable): 1000 kN - Max.ejector force: 30 kN - Retraction force: 300 kN - Pressing speed: 8 mm/sec. - Rapid traverse: 48 mm/sec. - Opening speed: 44 mm/sec. - Retraction speed: 23 mm/sec. - Press travel (stroke): 600 mm - Spray nozzle stroke: 70mm - Max.spray volume: 5 dm3 - Surface Ram top: 1000 x 1200 mm - Surface Ram below: 998 x 1280 mm - Distance between columns: 1130 mm - Plane parallelism between upper and lower plate: +/- 0.1 to 600mm lenght with uniform load distribution Iiedoupy Abspfx Agyjh - Maximum mould weight: 7000 kg - Load capacity of swivel plate: 3500 kg - Power connected load: 30 kW - Motor power: 7.5 kW - Sprays pressure max-min.: 4 - 10 bar - Max.flow pressure: 190 bar - Return pressure: 190 bar - Air comsumption injection: 20 - 50 Ndm3 - Tank: 140 l

Condition: new, Year of construction: 2025, Sliding clip formers are used to produce fixation sliding clips for double standing seam roofing panels. Before installation roofing panels have to be made using roll former roofing machines. After finishing of panels production and preparing roofing works panels can be installed on roofing place with special fixation clips. Those clips, depending on design, could be fixed or sliding ones. Fixed clip has simple and cheap design so it can be good for small roofs that doesn’t have long length panels. Sliding clip are good for big roofs with different designs and long-length panels. Sliding clips can move and self-find perfect position so not be damaged and safe for roof while temperature expansions. We offer punching presses for making both fixed and sliding clips. We make sliding clip formers for 25, 27 or 39mm clip highs For sliding expansion clips productions there have three presses to be used. First sliding clip bottom part press is used for punching bottom part of sliding clip with fixation round holes and connection oval hole. At the same time this press cuts metal strip with necessary length. Blank for clip production is easy to get using manual guillotine or cut-to-length slitting machine. Iedpjqxalxjfx Agyjih Second sliding clip bottom part bender is used for bending of sliding clip bottom part to 90 degrees angle. So, after this operation bottom part is ready. Third clip former makes top part of sliding clip at the same time forming and bending it. After producing bottom and top part of sliding clip you can easily connect it to one working sliding clip. So using sliding clip formers that we offer you can easily make expansion clip and use it while double standing seam roofing installation without any unnecessary deformations. Maximum metal thickness you can work with -1mm. To get more information about sliding clip former we produce please contact our sales department.

Condition: new, Working width 3500 mm Iodpfx Aed Ih H Sjgyeih Working height 2300 mm Number of cylinders 4 St.

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm Ijdpfx Aecmat Uegysih the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, pressing force: 100 t, stroke length: 270 mm, oil tank capacity: 400 l, total length: 1,200 mm, total width: 1,100 mm, overall weight: 7,500 kg, year of last overhaul: 2026, LAUFFER double-acting hydraulic press, 100/30 tons. The press has been completely refurbished and has not been used. I am also including 400 liters of hydraulic oil, so it is ready for use. For more information and a video demonstrating its operation, please contact the phone number provided. Iedpfx Agoz Hc A Noyeih

Condition: used, Year of construction: 2003, Year of manufacture: 2003 Ijdpjz Hnukjfx Agyeih Technical specifications: 2 colors + varnishing unit Max. sheet size: 740 × 1,040 mm 159 million impressions Rolandmatic Tresu varnishing unit CCI ink remote control IR/TL dryer Grafix Cantronic powder sprayer PPL power plate loading Automatic plate changing All washing systems Currently in production and operational Availability: available in the short term Price: upon request Location: Germany

Condition: used, Year of construction: 2011, Pneumohydraulic press Manufacturer: TOX Type: EMB 075.001.A.001 Year of manufacture: 2011 Iiedpfx Asz H I I Rjgysh Pressing force: 750 kN (equivalent to approximately 75 tons of pressing force) Total stroke: 200 mm Working stroke: 10 mm Machine weight (without tooling): 4,150 kg 51026ä

Condition: used, Year of construction: 2010, 2 x Amada Astro HDS 1030/NTR press brakes, year of manufacture 2010, and Amada Astro III press brake, year of manufacture 2013. Iedpoy Em Uljfx Agysih

Condition: good (used), Code: 0478 Brand: ITALPRESSE Model: V/2 Iiedpfx Agszz Szajyoh Mechanical press for cold gluing Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2200 x 1000 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2550 x 1000 x 1650 h Weight kg 750

Condition: used, gebraucht 080242 prompt, Zwischenverkauf v Iodpfsz Afcmjx Agyeih Italien 1890 € 1 Upper tool 1033/28°/R 0,6/8 mm 4 x 835mm Lower tool 3000/U 8 mm 3 x 835 mm + 1 x 400 mm

Condition: excellent (used), Year of construction: 1973, Description to follow! Iiodpoz Ebqvjfx Agyeh

Condition: good (used), Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Spindle press: Hand spindle press -Pressure: max. kg -Stroke: 60 mm -Intermediate dimension: 200 mm Iisdpjz Egh Tofx Agyoh -Dimensions: 1020/600/H1520 mm -Weight: 120 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Complete line as shown on photos. Excellent condition. Force 200 t Table 1800 x 1000 mm Number of cycles per 1 min Iedoz D Tdfopfx Agyjih Machine dimensions 2700 x 2000 x 4400 mm Machine weight 28000 kg

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 461/08, functionality: fully functional, For sale: Energo hydraulic NC press - Type: GTVS 400 NC - Year of manufacture: 2008 - Serial no.: 461/08 The hydraulic press is in like-new condition. It has 5,000 operating hours and has been used at minimal pressures, with a maximum force of 50 tons. It has been regularly serviced by the manufacturer, Energo. It offers high precision, with a ram depth accuracy of 0.01 mm and the capability for multi-step simultaneous programming, allowing you to set the depth, pressure, and pressing speed. It is connected to the power supply and ready for operation. Iiedpfx Aoz Iymnjgyjh

Condition: good (used), Nagel Citoborma 490 Paper Drill This is the largest Citoborma drill currently in production. Very good condition, ready for production. Iiodpfx Ajz Dr U Nsgyeh The machine has 4 drilling heads. Drilling waste is discharged into a basket located at the rear of the machine. The machine is operated using a foot pedal or two-handed buttons. Each head has a separate up/down adjustment, allowing for the use of drill bits of different lengths. The set includes spare drill bits, tools, and an instruction manual. Technical specifications: Number of drilling heads: 4 (each head can be quickly removed) Maximum stack height: 60 mm Drill bit size: 2-10 mm Adjustable spacing: 45 – 425 mm Two drilling speeds 380V power supply Weight: 365 kg Made in Germany.