Used Almac Fa 90 C.i.p. for sale (13,712)

Condition: used, Year of construction: 2015, machine/vehicle number: 29156, 27781, Decoiler Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Expansion range: 460 - 525 mm Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Bedpfevg Iqxex Aprelh Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 90 mm Number of pinch rolls: 2 pcs. Diameter of pinch rolls: 90 mm Material thickness: 0,8 - 8,0 mm Feeding speed: 3 - 30 m / min Standard configuration Year of manufacture of the decoiler 2015The straightening machine was delivered in 2009 and adapted to the decoiler in 2016 Extended machine accessories Insertion aidLoop bridge

Condition: used, High-voltage tester, high-voltage testing device, high-voltage tester for HV, PE, IS measurement Testing console, testing station, measuring station, testing device, measuring device ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 The PE/IS/HV / 91-3J.3 device is used to measure voltage strength, insulation resistance, and the voltage drop of the protective conductor in accordance with VDE0113 and IEC standards according to EN60204, Part 1. Serial No.: Year of manufacture 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The SHV 16 / 90-1V.3 device provides a highly stable DC voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground potential and can be set to a maximum of 300 V. Serial No.: Year of manufacture 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 Bsdsd Dc Unopfx Aprjlh - Device unit, compact, on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many more ELABO devices are available under storage numbers 57820 and 57821.

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Grundfos, Multi-stage submersible centrifugal pump -Type: MTH2-90/7 AWA-AUUV Bsdey Ti I Rjpfx Aprelh -Drive: 1.1 kW 2850 rpm -Max. flow rate: 2.5 m³/h -Max. delivery head: 64.6 m -Immersion depth: 250 mm -Dimensions: 230/180/H490 mm -Weight: 13.9 kg

Condition: refurbished (used), Krauss Maffei injection molding machine 25 tons Year: 2000 Blodpfx Asrdg Tpjprjh IPC not working (see map)

Condition: good (used), Year of construction: 2013, Hazardous materials container, REI 90 / F 90 fire protection storage type WFP, cantilever racks, internal lighting, loading ramp, leakage sensor – used - : Price ex location: €29,500 (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Denios Year of manufacture: 2013 Model: BMC-X 600-K-T90-2 Model: REI 90 / F 90 Fire Protection Storage WFP-X 14 Room system surface finish External coating: RAL 9002 grey white Internal coating: RAL 9002 grey white Door coating (both sides): RAL 9002 grey white Dimensions (mm) Internal | External (without attachments) Width: 2,560 | 2,952 Depth: 5,500 | 5,938 Height: 2,500 | 2,924 Sump capacity Steel sump: 1,560 litres Door placement: short side Stainless steel door handle with anti-panic function: 1 pc Technical ventilation fire protection system: 1 pc Exhaust air monitoring: 1 pc Door holding device single-leaf door: 1 pc Loading grate for pallet truck, WFP 14: 1 pc Cantilever racks: 8 pcs Ex-proof internal LED lighting 42 watts: 1 pc Steel loading ramp suitable for pallet truck: 1 pc Surge protection: 1 pc Leakage sensor SpillGuard Connect: 1 pc Emergency exit sign (fluorescent): 1 pc Control unit: 1 pc • Safety storage for water-polluting substances (WGK 1-3) as well as flammable, toxic, and oxidizing substances according to GHS • Roof and sidewalls made of fire-resistant cladding (EI120) with fire protection from both inside and outside. Floor fire protection via suitable substructure on-site • Roof drainage via integrated gutter with internal downpipes at each short side • Manufactured to DIN EN 1090-2 • Flexible indoor or outdoor installation on a concrete surface • Frame structure designed to meet static requirements • Constructive potential equalization by grounding the steel frame structure • Hot-dip galvanized steel sump made from S235JR (material no. 1.0038) to DIN EN 10025, 5 mm material thickness, corrosion protection for at least 5 years • Leak tightness test of the sump according to EN ISO 3452-1 with factory certificate • No ground clearance. Not suitable for underpassing by industrial trucks • Front lugs for securing the room system to the concrete base • Corrosivity class C3-M according to DIN EN 12944, part 1 • Single-color 2K PUR coating in RAL color tone • Self-closing fire protection door with overhead door closer and anti-panic lever set, lockable by cylinder lock with Euro profile 17mm • Convenient access thanks to low door threshold of 147 mm Bedpfx Apoyzc Dhjrslh • Storage area with hot-dip galvanized, removable grating supports • Demountable transport brackets on the roof section II 2(1) Ex emb[ia] IIC T6) Cantilever racks Internal lighting Loading ramp Leakage sensor SpillGuard Connect Original price: €49,000 Condition: good – very good. No spills; only closed containers were stored inside. Availability: immediately Location: 79312 Emmendingen, Germany Detailed offer data available as PDF on request.

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Bedpeuzn Nnsfx Aprslh Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, mileage: 51,013 km, power: 118 kW (160.44 HP), first registration: 09/1986, fuel type: diesel, empty load weight: 6,320 kg, maximum load weight: 2,880 kg, overall weight: 9,200 kg, tire size: 9R22,5, axle configuration: 4x4, wheelbase: 3,500 mm, color: blue, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, Equipment: all wheel drive, cabin, differential lock, trailer coupling, Vehicle location: Bovenden, Doka, double bench seat, switch 5, differential lock, storage box, leaf suspension, air+light trailer hitch Bledpfxovhk I Ao Aprsh Wheelbase: 3500 mm double cab, box body with roller shutters. Body length approx. 3100 mm! Spare wheel available for an extra charge! The sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: good (used), Three-phase motor, electric motor -Manufacturer: Kracht, electric motor type MD 90-75 Bodey S Rl Iopfx Aprolh -Power: 1.1 kW -Speed: 1410 rpm -Shaft: Ø 16 x 18 mm -Dimensions: 305/230/H190 mm -Weight: 15.3 kg

Condition: used, Year of construction: 2011, overall dimensions 135x89 mm; power supply 230 V,50/60 Hz, 0,5 A; Compressed air supply 6 bar; Blodpfx Aoy Txnaopreh Calibres 25-85; Clipps E200-243; weight 100 kg.

Condition: used, Year of construction: 1999, plate thickness 4 mm plate length 200 mm total power requirement 3 kW weight of the machine ca. 550 kg Bjdpfx Ajy Tif Ajprjlh dimensions of the machine ca. 1,0 x 0,8 x 1,0 m

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 110001, For sale: SACEM drilling and milling machine for machining large parts. The machine is fully functional and is currently used in production, primarily for finishing operations. The machine is particularly suitable for machining large, unwieldy parts. Weight: 10 t Voltage: 380 V, 50 Hz Power consumption: 20 kW Compressed air: 3.5 - 6 bar Spindle speed: 4 - 1600 rpm Feed rate: 3 - 2500 mm/min Tool holder: SK40 Drilling depth / spindle stroke: 800 mm Travel distances: x: 900 mm y: 900 mm z: 1200 mm Clamping area: 1000 x 1200 mm Maximum workpiece weight: 4000 kg Accuracy: 0.02 mm Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required. • Sale only within Germany or the EU. Bsdsxbn A Tspfx Aprslh Sales/transfer conditions: • Disassembly, removal, and transportation are the responsibility of the buyer and at their own risk. • The buyer is responsible for providing personnel, tools, and transport equipment. The personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to hearing from you so that we can discuss the further details directly.

Condition: new, functionality: fully functional, Laser Core Identification YLP: Ytterbium Laser Pulsed. This identifies it as a pulsed nanosecond fiber laser operating in the near-infrared spectrum (typically 1064 nm wavelength). HP: High Power. Indicates the heavy-duty sub-series designed for fast processing speeds and high ablation rates compared to the standard, low-power desktop marking modules. 1: Indicates the Optical Beam Quality (\(M^{2}\)) standard or series generation (typically targeting a beam parameter product near \(M^2 \leq 2.0\) for clean, tight focal spots). 30x240: Pulse Width / Duration Configuration. Refers to its tunable or specific pulse length capability (in nanoseconds), optimizing it for balancing rapid material removal without massive heat-affected zones. 200-200: Defines the power metrics.200 W Average Output Power: Capable of sustaining continuous pulsed work at 200 Watts. 200 kHz Pulse Repetition Rate (PRR): The maximum frequency of the laser pulses, determining how quickly it can scribe or clean surfaces. Electrical Requirements (90-240 VAC) Power Input: Features a universal, autoranging power supply unit (PSU). It safely plugs directly into standard global wall grids spanning 90V to 240V AC (Single Phase, 50/60 Hz) without needing heavy industrial 3-phase transformers. Bljdpfxsy Udyqs Apreh Core Applications Because of its high 200W power and high-frequency pulsed delivery, this model is typically integrated into CNC machinery or robotic cells for: High-Speed Laser Cleaning / Ablation: Removing rust, paint, oxides, and coatings from metals without damaging the base substrate. Deep Laser Engraving & Marking: Precision engraving on hard metals, ceramics, and highly reflective materials (like aluminum or copper). Silicon / Solar Panel Scribing: High-throughput cutting or edge deletion tasks in manufacturing. Brand new never used. Please check out our other listings as well.

Condition: good (used), Year of construction: 2006, MACHINE Wire EDM Machine Manufacturer: Mitsubishi Machine Model: FA 20 Control: Year of Manufacture: 2006 TECHNICAL DATA Travel distances - X-axis: (mm) 500 - Y-axis: (mm) 350 Bjdpfx Ajy Snbmjprslh - Z-axis: (mm) 300 Machine Table - Table size, fixed table L x W: (mm) 780 x 630 - Max. table load: (kg) 1,500 - Workpiece dimensions: (mm) 1,050 x 800 x 295

Condition: new, sheet width 1050 mm plate thickness 3,3 mm pre-bending 3,0 mm roll diameter 90 mm min. dia. 130 mm total power requirement 1,1 kw weight of the machine ca. 570 kg dimensions of the machine ca. 2100 x 800 x 1130 mm Domestic equipments: - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Additional equipment: - motorized rear roller adjustment Bljdpfoyv Nfbox Aprsh - Digital display for back roller - induction hardened rolls

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. Bljdjfh Tmmspfx Aproh - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh Blodpfjd E Ixzex Aprsh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Cutting height max. ca. 100 mm Bedpow Ng T Uofx Aprolh Chain width 300 mm Motor output 45 kW

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, STC-Ref:G-991-0081 GUK FA-36/4 ,Year: 2004 format: 360x450 mm equipped: - type: FA-36/4 SAF - belt delivery - Vacuum flat-stack feeder - 1st folding unit: 4 buckle plates Bedpeza U T Defx Aprjlh - batch counter --> available: 06/2026

Condition: used, Year of construction: 1980, infeed height: 350 mm, Equipment: compressor, 2 pockets Bledpfx Aoy N Ukvjproh Compressor

Condition: new, The Durma 5-axis fiber laser cutting system will be your best partner for manufacturing automotive and other high-precision and complex 3D parts. The system offers 25% more processing area than machines with the same concept. For impeccable cutting performance, the powerful machine body and rotary table will give you the best quality. With the easy use of the fixture, you can save time. No maintenance and service is required thanks to components from well-known manufacturers and high quality materials. High quality 3D cutting can be achieved. With this technology, you have less energy consumption and can increase your business profit. The machine impresses with its speed, reliability and design. HD-FA Technical Data Available in 2,3 and 4 kW X axis: 3,000 mm Y axis: 1.500 mm Z axis: 650 mm B axis: ±135° C axis: ±360°xn Maximum vector speed: 173 m/min. Maximum vector acceleration: 1.73 G Tolerance positioning: ±0.08 mm Repeatability: ±0.08 mm MACHINE DIMENSIONS Machine size: 6168 mm x 3936 mm h= 3700 mm working area: 9.000 mm x 10.000 mm (safe area) Distance of the turntable door: 4.000 mm machine weight: 16.000 kg Cutting head: Type: 3D Focus type: Automatic Control unit: CNC Siemens Sinumerik 840D SK Screen: 19 inch touch screen Filter Bledeg Adknjpfx Aprsh Capacity: 2.500 m³/h - 4 kW

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, power: 2 kW (2.72 HP), saw blade diameter: 350 mm, Radial arm saw Graule This machine can cut 90° only !!! Length of cut : 430 mm Depth of cut : 135 mm Sawblade-Ø : 350 mm Bledey Dgdkopfx Aprjh Suction plant-Ø : 100 mm

Condition: defective spare-parts repository (used), Year of construction: 1980, Machine: Type: BFT 90/3at Manufacturer: UNION Year of manufacture: 1980 Control: NC control, HEIDENHAIN TNC 131 Electrical cabinet: by Reliance Machine group: Table-type boring mill Customs tariff number: 84592100 Technical data: Spindle diameter: 102 mm X-axis travel: 1000 mm Y-axis travel: 1250 mm Z-axis travel: 1600 mm Blsdpfx Aoygarljpreh Tool holder: ISO 50 DIN 2048 Spindle stroke: 710 mm Spindle speeds: 8 – 1600 rpm Table size: 1000 x 1120 mm Table rotation: 360° Max. workpiece weight: 2,500 kg Feed ranges: 0.8 – 2,000 mm/min Rapid traverse: 3.15 m/min Feed force: 16,000 N Spindle motor: 11 kW Total power requirement: 23 kW Machine weight: approx. 9.3 t Space requirement: approx. 5.3 x 3.8 x 3.14 m Special features and notes: Electronic issue: There is an electronic problem (control board needs to be replaced). The price has been adjusted accordingly (€10,500.00) to account for the necessary repair work. The HEIDENHAIN contouring control and the mechanical components of the machine are in good condition. Inspection is possible by appointment to assess the machine's condition and the extent of the electronic issue. For further technical details, please refer to the attached data sheet. Important information: All information is subject to confirmation, prior sale, errors, and availability. Technical data and all information provided are non-binding and only for orientation purposes. Contact: If interested or to arrange a viewing, please send a message or make an appointment. Disclaimer: The item is sold as described. Returns, warranty, and guarantee are excluded. The buyer agrees that the item is purchased in its current condition, "as seen," with no right of return. No liability is assumed for the accuracy of the information provided in the text or photos. By purchasing this item, you agree to the above-mentioned terms and conditions.

Condition: good (used), functionality: fully functional, power: 35 kW (47.59 HP), fuel type: diesel, overall weight: 4,600 kg, operation weight: 4,600 kg, Year of construction: 2001, operating hours: 1,828 h, VÖGELE 6-90 Track-Driven Asphalt Paver For sale: a robust and reliable VÖGELE 6-90 asphalt paver, ideal for smaller to medium-sized roadworks, repairs, and maintenance projects. 🔧 Technical specifications: Make: VÖGELE (Joseph Vögele AG – Germany) Model: 6-90 Year of manufacture: 2001 VERY LOW HOUR COUNT = only 1828 operating hours. Power: 35 kW Serial number: 690617 Max. operating weight: 4600 kg Track drive for optimal stability and traction 💪 Key features: Compact and maneuverable machine, perfect for urban environments Very suitable for bicycle paths, parking lots, driveways, and small roadworks Solid German quality – built to last Simple operation and maintenance Mechanically in good working order (as can be seen in the photos) 🛠️ Condition: Used machine with normal signs of wear and tear Ready for use, in fully good working order. Bledpfxjzbmuvj Apreh Always used in a professional environment Ideal for someone looking for an affordable paver without a large investment General synonyms: Asphalt spreader Road asphalt machine Asphalt layer Road layer Asphalt laying machine Asphalt paver (commonly used in the industry) Paver Road construction machine (more general) Bitumen spreading machine (slightly broader, depending on use) Asphalt machine Road construction spreader Compact asphalt layer

Condition: good (used), mileage: 6,22,912 km, power: 185 kW (251.53 HP), first registration: 09/2016, fuel type: diesel, tire size: 315 / 70 / R22.5, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 6, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 10,100 mm, total width: 2,550 mm, total height: 3,700 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, soot filter, General information Cab: Space Cab Technical information Number of cylinders: 6 Engine capacity: 6.700 cc Transmission Transmission: ZF, 6 gears, Automatic Axle configuration Tyre size: 315 / 70 / R22.5 Make axles: DAF Brakes: disc brakes Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40%; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 9.677 kg Carrying capacity: 9.323 kg GVW: 19.000 kg Interior Interior: grey Maintenance APK (MOT): tested until 09/2026 History Number of owners: 2 Bedpfxeza Uhuo Aprjlh Condition Technical condition: good Visual appearance: good Number of keys: 2 (1 hand transmitter) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Low-noise - Particulate filter - Radio/CD player - Remote central locking - Speed limiter - Spotlights - Stability control - Toolbox - Visor - Webasto

Condition: used, Year of construction: 1991, pressure 40 t distance between columns 930 mm stroke 1100 mm Bedpfxevuul Se Aprolh distance table/ram, max. stroke up, adjustment up 1035 mm table surface area 900 x 1280 mm table height over floor 665 mm ram surface 900 x 1200 mm side window 700 mm max. tool weight 7,0 t max. capacity of swivelling ram plate 3,5 t Speed down 0 - 50 mm/s Speed up 0 - 34 mm/s Working speed 0 - 10 mm/s oil volume 140 l power requirement 9,5 kW weight 7,0 t dimensions (WxDxH) 2,1 x 3,6 x 3,6 m with swivelling ram, movable table