Used Almig Combi Xp 15-270D for sale (17,618)

Condition: used, Year of construction: 1998, Continuous body press Manufacturer: LIGMATECH TYPE: MPP 15 Year of manufacture: 1998 The MPP 15 is a flexible press for batch-related production without setup times. The MPP 15 can be used individually or in various combinations in an assembly line. The pressing forces are applied pneumatically. The separately adjustable vertical and horizontal pressure allows for pressing both horizontal and vertical bodies. The vertical forces are transmitted through a plate, while the horizontal forces act on the body via press cheeks. The position of the center press cheeks can be adjusted using adjustable stops, allowing for different heights of bottoms and sides. During the infeed process, the body is measured photoelectrically, which automatically positions the horizontal pressure bar. Technical data: Body dimensions: Length: min. 300 mm / max. 2300 mm Height: min. 300 mm / max. 1220 mm Depth: max. 600/800/1000 mm (depending on the press type) Pressing pressure: vertical max. 17 kN horizontal max. 16 kN Working height: 500 mm Transport speed: min. 8 m/min. / max. 37 m/min. Pressing time: selectable up to 999 s Operating voltage: 400 V, 50 Hz Control voltage: 24 V DC (according to VDE) Lsdpfxozuzv Ts Ahtjhk Required air pressure: 5...8 bar Air consumption: 120 NL/cycle Total connected load: 3 kW Weight: approx. 4 tons Required room height: 3000 mm Extended infeed belt as a staging area Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 003935, Max Panel Width: 1200 mm Max Panel Length: 40 mm Lhedpfxswuckns Ahtsk Max feed speed: 60 m/min Operating Units: 3 nr

Condition: used, Technical specifications: Max. length of sharpened knives: 600 mm Diameter of grinding wheel: 120/150 mm Manual feed Power supply: 380 V Total power: 2 kW Overall dimensions: Length: 900 mm Lodpfozvm Tmjx Ahtohk Width: 700 mm Height: 1150 mm

Condition: ready for operation (used), Siemens A5E00470992 Panel system Panel 15" SN: LBUD002069, serial number as per photo, used, slight signs of use, 100% functional, scope of delivery as per photos Lodpfx Ahezu Em Njtjhk

Condition: used, turning diameter 260 mm turning length 280 mm control OSP500 1. Machine Specifications Item Unit Specification Number of controlled axes – 2 Swing diameter over bed mm Ø 450 Swing diameter over slide mm Ø 350 Lhsdpfowm Rrdox Ahtjk Swing diameter over cross slide mm Ø 300 Maximum turning diameter × length mm Ø 260 × 280 Spindle diameter mm Ø 100 Spindle nose – JIS A2-6 Spindle taper mm Ø 70 × 1/10 Spindle bore mm Ø 62 Spindle speed range rpm 35 – 4,000 Z-axis travel mm 320 Z-axis rapid traverse mm/min 20,000 X-axis travel mm 155 X-axis rapid traverse mm/min 15,000 Turret type – V Number of tools – 8 (optional 12) Tool size (external turning) mm ¦ 25 Tool size (internal turning) mm Ø 40 (optional Ø 32)

Condition: used, Year of construction: 1997, functionality: fully functional, turning diameter over cross slide: 450 mm, turning length: 420 mm, turning diameter: 350 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 420 mm, overall weight: 3,500 kg, KEGAI TUR-15 Manufacturer: Ikegai Model: TUR-15 Machine Type: CNC Turning Center Year: 1997 Lhsdpfx Aezvmytehtsk CNC Control: Fanuc Series 18-T Drives: Fanuc Alpha Series Number of Axes: 2 Swing Over Bed: Approx. 450 mm Maximum Turning Diameter: Approx. 350 mm Maximum Turning Length: Approx. 410–420 mm X-Axis Travel: Approx. 170–200 mm Z-Axis Travel: Approx. 420 mm Chuck: 8" Hydraulic Chuck Spindle Nose: A2-6 Spindle Bore: Approx. 57–61 mm Bar Capacity: Approx. 45–51 mm Spindle Speed: Up to 4,000 rpm Spindle Motor Power: Approx. 11 kW / 15 HP Turret Capacity: 12 Stations Tailstock: Included Chip Conveyor: Included Machine Dimensions: Approx. 2,440 × 1,470 × 1,575 mm Machine Weight: Approx. 3,300–3,700 kg

Condition: used, Year of construction: 1997, functionality: fully functional, spindle bore: 66 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 540 mm, quill travel distance: 130 mm, quill diameter: 80 mm, BRIDGEPORT ROMI POWERPATH 15 - Manufacturer: Bridgeport / Romi - Model: PowerPath 15 - Year: 1997 - Machine Type: CNC Turning Center - CNC Control: Fanuc Series 21i – To be confirmed - Number of Axes: 2 - Chuck Size: Approx. 203 mm / 8" - Swing Over Bed: Approx. 440 mm - Maximum Turning Diameter: Approx. 280 mm - Maximum Turning Length: Approx. 540 mm - X-Axis Travel: Approx. 185 mm - Z-Axis Travel: Approx. 540 mm - Spindle Bore: Approx. 66 mm - Bar Capacity: Approx. 51 mm - Spindle Nose: A2-6 - Spindle Speed: Up to 4,500 rpm - Spindle Speed Range 1: Approx. 15–1,500 rpm - Spindle Speed Range 2: Approx. 45–4,500 rpm - Spindle Motor Power: 15 HP / approx. 11.2 kW - Turret Capacity: 12 tools Lhsdpfxszvf Dwj Ahtok - Tailstock: Included / To be confirmed - Tailstock Quill Diameter: Approx. 80 mm - Tailstock Quill Travel: Approx. 130 mm - Chip Conveyor: Included

Condition: used, Year of construction: 2022, operating hours: 302 h, 2022 | Imer IMR 15 DA | Used Spider Boom Lift | 302 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 44100 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Lhsdpfx Ahezv Em Sjtok 👷‍♂️ Inspected by an independent expert 45 inspection points 43 approved ✅ 1 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Very good condition, overall, almost new condition, only the starter battery needs to be replaced. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41113 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 3649.63 € 15 mm MK 2 220 mm 40 - 4000 U/min 0,75 kW M12 400 mm 520 mm 850 mm 65 kg 70 mm 85 - 370 mm 300 x 250 mm 70 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting Lhsdpfey Hf Nwsx Ahtjk - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 15/18 (in E335/ST60) 17 Nm Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic Drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Machine cabinet with door and drawer Drill package (vice & keyless chuck)

Condition: good (used), Year of construction: 1982, max. wheel diameter 600 mm gear width 500 mm max. module 15 min. module 1 total power requirement 2 kW weight of the machine ca. 2 t dimensions of the machine ca. 2x1,5x2 m The rounding of the teeth is obtained by coordinating alternative movement of the cutter and rotary movement of the piece. The alternative movement of the cutter is obtained by rotating a cam, shaped in order to obtain radius or cusp rounding. A series of 4 cams allows to work modululus from 1 and 16 included. An regulation device allows change the modulus between the minimum and maximum value of every cam. The rotation of the piece is controlled by a three-stage gear wheel which forms the dividing system. The piece lock and the movement of Lhjdpfx Aewftuxehtek the rapid entry of the cutter to the piece is controlled by pneumatic servo devices. The practicality and rapidity of the equipment, as well as the wide range of profiles available on the cams and the ability to process internal gears, make the machine a universal machine suitable for machining small and large series. --> technical features Max module: 15 --> Max diameter: 600 mm --> Spindle/head speed: 1450 - 2100 - 2800 rpm --> Production output teeth per minute: 35 - 50 - 75 --> Motor output spindle: 2800 rpm - 1.5 HP --> Motor power piece rotation (self-braking): 1.5 HP --> Motor power automatic (self-braking): 0.35 HP --> Motor power cooling system: 0.25 HP --> Dimensions: 2000 x 1500 mm --> Total weight: 2000 kg Accessories Cam x 5 Indexing wheels Tools Serial no. 152/0589/94 Machine with full enclosure Counter support

Condition: good (used), Kemper SPL 15 spiral mixer Ljdpfx Aszvbc Aehtehk - used - 25 kg dough capacity - 2 speeds - stainless steel bowl and spiral - technically sound - pickup from warehouse / shipping option available - price upon request

Condition: reconditioned (used), Year of construction: 2015, machine/vehicle number: 0-250-10-2402, functionality: fully functional, operating hours: 50,000 h, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Refurbished machining center. No.: 0-250-10-2402 TECHNICAL DATA: PERMANENTLY INSTALLED FUNCTIONS: ▪️ V21/32 MM HIGHSPEED 7500 drilling head ▪️ Unit for creating keyways ▪️ H6X drilling unit ▪️ H4Y drilling unit ▪️ Tool changing spindle 10/12 KW HSK 63 (S1/S6-50%) ▪️ Drilling unit and milling unit on separate Z axes ▪️ C axis with unit connection Lodpszu Nq Sjfx Ahtjhk ▪️ 8-position tool changer magazine in the X and Y axes ▪️ Tool magazine at the rear with 8 positions ▪️ Two-position magazine for unit feeding MACHINE OPERATION ▪️ WOODWOP for the machine ▪️ WOODWOP DXF IMPORT BASIC ▪️ 3D simulation for the CNC machine ▪️ Laser positioning of beams and suction cups DIMENSIONS OF WORKPIECES ▪️ Length of workpiece X, single-part processing – length M: 3250 ▪️ Width of workpiece Y, single-part processing – width M: 1400 DOCUMENTATION ▪️ Selected languages: English ▪️ Format: Data carrier + paper documentation GENERAL INFORMATION ▪️ Control system: POWERCONTROL with POWERTOUCH system ▪️ CE marking: YES ▪️ Operational status: Ready for operation ▪️ Year of manufacture: 2015

Condition: used, Year of construction: 2018, operating hours: 311 h, functionality: fully functional, total width: 800 mm, total length: 1,000 mm, total height: 1,300 mm, overall weight: 110 kg, input voltage: 220 V, empty load weight: 91 kg, Kärcher Ice Blaster IB 15/120 – Dry Ice Blasting Machine For sale: Kärcher Ice Blaster IB 15/120 professional dry ice blasting machine. The IB 15/120 is a powerful industrial dry ice blasting machine designed for demanding professional cleaning applications. It combines high blasting performance with robust and reliable technology. Year of manufacture: 2018 Operating hours: 311 h Included accessories: The machine is supplied with: 6 m blasting hose Blasting gun Several different blasting nozzles Technical specifications: Operating pressure: 2–16 bar Air consumption: 2–12 m³/min Dry ice hopper capacity: 40 kg Dry ice pellet diameter: 3 mm Dry ice consumption: 30–120 kg/h Power supply: 220 V Power cable: 7 m Weight without accessories: 91 kg Dimensions (L × W × H): 1000 × 800 × 1300 mm Blasting hose: 6 m Location: Latvia, Riga Price: Negotiable Please contact us for further information, additional photos, or videos. Lhjdpfxozuv Abs Ahtjk

Condition: used, functionality: fully functional, Year of construction: 1995, operating hours: 2,800 h, load capacity: 1,500 kg, lifting height: 3,200 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Quattro Technical condition: good Lodpfxszuhhce Ahtehk Front tire type: Superelastic Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire condition: 20 - 40% Battery type: PzS Side shifter, 3rd valve, rear work light, front work light.

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. • Core processing machines: • HOMAG Optimat KFL 525 • Units: pre-milling, gluing, trimming, radius units, scrapers, polishing • HOMAG control with touchscreen/keyboard • Sensors for board thickness and edge material detection • Large blue safety windows • HOMAG Optimat KFL 526 • Continuing trimming and polishing stations • Manual service access with lift-up covers • Controls & electrics: • HOMAG electrical cabinet with main switch • PLC, fuses, control boards, voltage/current meters • Safety control panels (stop, reset, feed, emergency stop) • Condition: • Complete, physically connected line • Normal operational wear; no major damage visible • Full set of professional edge-banding aggregates installed Additional equipment • 2× Automatic loading systems: WEEKE OPTIMAT BST 500 D (2007) • Ser. no. 0–251–04–2756 (34 kW, 80 A) and 0–251–04–2755 (25 kW, 63 A) • Overhead gantry with vacuum lifting cups, automatic material alignment • Heavy-duty roller conveyor section • Transport/transfer system: HOMAG OPTIMAT TDL 310/25/12 (2007) • Ser. no. 0–205–10–1698 • Wide roller conveyor with safety guards • Cross-transfer and sorting sections • Integrated measuring and positioning units • Portal manipulator (stacker/unloader) Lodpfxozuhbij Ahtshk • Overhead vacuum pick-and-place unit (orange) • Linear guiding with chain drive, dedicated motor drive • Automatic lifting and stacking of finished panels • Extraction/filtration • Strong industrial dust extraction along full line (yellow flexible hoses + metallic ducts) • Safety guarding • Complete set of safety guards across the line

Condition: new, diameter / mm Cutting (quantity) / 0 weight / kg Make: INA Type: RUS38206 GR3/-10-15 RO-F05 Condition: New Roller bearing Manufacturer's part number: Stock: 50 units available Ledpfx Ahjy S D Snstohk Price per unit

Condition: good (used), Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMER 160 L4 -Power: 15 kW -Speed: 1455 rpm -Voltage: 380/660 volts Lhjdpjtzrffjfx Ahtjk -Shaft: Ø 42 x 110 mm -Protection rating: IP44 -Design: B3 -Dimensions: 600/320/H395 mm -Weight: 123 kg

Condition: used, Year of construction: 1993, Control Sinumerik 805 turning speeds 45 - 6000 U/min Solid drill diameter / 0 weight of the machine ca. 20 t Type of machine: deep hole drilling machine Model / Type: TB 2 15 30001KT Year of construction: 1993 Manufacturer: hole Machine number: 221-3000-2093 Machine weight: approx. 20,000 kg Machine footprint: Width = approx. 3800mm Length = approx. 13500mm Height = approx. 3100mm Drilling length: approx. 3500mm Drilling capacity: drill 45mm / drill out 80mm Spindle speed range: 45 - 6000 rpm Control: Siemens Sinumerik 805 Hamül – coordinate table Type: KT 8.5 – 10.10 Clamping surface: approx. 1100 mm x 980 mm Travel: Y - axis: approx. 800mm Traverse path X - axis: approx. 500mm Lsdpevvx Hiofx Ahtehk 7 pieces clamping - T - grooves: 18 mm Special equipment: 1 piece Fibroplan NC - rotary indexing table Type: NC 1.05 Permissible transport load in horizontal use 2500 kg With manual chuck Forkardt F 630 The NC rotary indexing table can be adjusted manually in the longitudinal and transverse directions relative to the clamping table and is clamped hydraulically. 1 piece chips - centrifuge Type: VZ5A from CEPA Drum capacity: 80 liters Loading weight max. 100 kg Drum - Ø: 600 mm Speed: 1000 rpm 1 additional pump for large drill Ø 1 piece Bosch radial piston pump no.: Suitable for lip drills (internal cooling, chips run outwards) Suitable for BTA drills with screw-on heads (internal cooling, chips run inwards)

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: E21MI19102784225, This is a combination oven/steamer, model CMP 201 in electric version, from the premium manufacturer Rational, manufactured in 2019, with only 1982 operating hours. The unit features an automatic self-cleaning program!! The combination oven/steamer is located in our in-house workshop and will undergo a thorough inspection. It will be sold with a 6-month warranty. These are current, original photos!!! The combination oven/steamer is expected to be available from week 30. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational service technician throughout Germany. Are you looking for a specific Rational equipment model? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices Professional refurbishment / inspection & expert cleaning Tested & fully functional Flexible shipping or self-collection options Competent advice - before and after the purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, air flow and cooking time. Technical data: W x D x H: approx. 879 x 791 x 1782 mm Power connection: 400 V / kW: 37.0 / 50-60 Hz Weight: approx. 254 kg Serial number: E21MI19102784225 Year of manufacture: 10/2019 Condition: Used, inspected and fully functional. Further details: Possible applications: Steam mode: from 30° C to 130° C Convection mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: Bringing pre-prepared and chilled dishes to the optimal serving temperature under ideal conditions. Automatic separation of fat for clean cooking chamber air Semi-automatic cleaning program 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every type of food. Ventilated double-glazed door (swiveling for easier cleaning) LED cooking chamber lighting Core temperature measurement by means of sensor Cool-down function High-performance fresh steam generator (automatic flushing and emptying) Handheld spray gun with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Lhjdezkkg Hopfx Ahtsk Shipping to islands or mountain stations only by arrangement Subject to change and errors. Do you have any questions, would you like to receive advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: E22SI16112554450, This is a combination steamer SCC WE 202, in electric version, from the premium manufacturer Rational, manufactured in 2016. The combination steamer is located in our in-house workshop and will undergo a thorough inspection, and will be sold with a 6-month warranty. These are sample photos of the same model series; actual photos will follow shortly. The combination steamer is expected to be available from week 30. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational service technician throughout Germany. Are you looking for a specific Rational appliance type? Ask us, we have access to a wide range of used and new equipment. We will gladly advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional - or money back Flexible shipping or self-collection options Competent advice - before and after the purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 standard Lodpfx Ahjzkhwiotehk This combination steamer offers space for 20 x 2/1 or 40 x 1/1 GN containers. In automatic mode, the appliance automatically recognizes the ideal cooking path, the size of the food, the quantity being loaded, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods and finishing). Technical data: W x D x H: approx. 1084 x 996 x 1782 mm Minimum dimensions of the door opening for transport W x H: 1145x1900mm Power connection: V: 400 / kW: 65.5 / Hz: 50/60 Weight: approx. 351 kg Serial number: E22SI16112554450 Year of manufacture: 11/2016 Condition: Used, inspected and fully functional. Further information: In combination steamer mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C) and combination (30°C to 300°C) Core temperature sensor Integrated energy optimization Care Control - self-cleaning Handheld spray with automatic retraction 8.5-inch color display and touchscreen 5 fan speeds programmable Integrated, maintenance-free grease separation system Automatic start time preselection 7 cleaning levels for unattended cleaning - also overnight Moistening adjustable in 3 levels - from 30°C to 260°C 5 programmable fermentation levels USB interface Joint-free, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors.

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: E22SI16112554448, This is a combination oven/steamer SCC WE 202, in an electric version, from the premium manufacturer Rational, manufactured in 2016. The combination oven/steamer is located in our in-house workshop and will undergo a thorough inspection before being sold with a 6-month warranty. The combination oven/steamer has only been used for 7,673 operating hours. You will receive an invoice with VAT shown. Service: We will be happy to assist you in arranging a certified Rational service technician throughout Germany. Are you looking for a specific Rational appliance type? Ask us, we have access to a wide range of used and new equipment. Ledpjzkh Ihefx Ahtshk We will gladly advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs • High-quality branded equipment at fair prices • Professional overhaul / inspection & expert cleaning • Tested & fully functional - or your money back • Flexible shipping or self-collection options • Competent advice - before and after purchase • Provision of operating instructions, connection diagrams & spare parts • Inspection according to DGUV V3 seal This combination oven/steamer offers space for 20 x 2/1 or 40 x 1/1 GN containers. In automatic mode, the appliance automatically recognizes the ideal cooking path, the size of the food, the amount being cooked, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods and finishing). Technical data: • W x D x H: approx. 1084 x 996 x 1782 mm • Minimum door opening dimensions for transport W x H: 1145x1900mm • Power connection: V: 400 / kW: 65.5 / Hz: 50/60 • Weight: approx. 351 kg • Serial number: E22SI16112554448 • Year of manufacture: 11/2016 Condition: Used, inspected and fully functional. Additional information: • In combination oven/steamer mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C) and combination (30°C to 300°C) • Core temperature sensor • Integrated energy optimization • Care Control - Self-cleaning • Handheld spray gun with automatic retraction • 8.5-inch color display and touchscreen • 5 fan speeds programmable • Integrated, maintenance-free grease separation system • Automatic start time setting • 7 cleaning levels for unattended cleaning - also overnight • Humidification adjustable in 3 levels - from 30°C to 260°C • 5 programmable fermentation levels • USB interface • Seamless, tub-shaped hygienic cooking chamber, rounded corners • Halogen cooking chamber lighting Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively according to our general terms and conditions (GTC).

Condition: used, Used VEM three-phase asynchronous motor with 15 kW power, IE3 efficiency class, and B5 flange mounting. Manufacturer: VEM motors GmbH Type: IE3-W41R 160L 4 C TPM HW Motor number: 414123 / 0033 H Motor type: Three-phase asynchronous motor Year of manufacture: 11/2017 Rated power at 50 Hz: 15 kW Rated speed at 50 Hz: 1490 rpm Rated voltage at 50 Hz: 400 / 690 V Connection at 50 Hz: Delta / Star Rated current at 50 Hz: 28 / 16.5 A Frequency: 50 Hz Lhjdpfxozugake Ahtok Power factor cos φ at 50 Hz: 0.83 Efficiency at 50 Hz: 92.8% Efficiency class: IE3 Number of poles: 4 Frame size: 160L Design: IM B5 Degree of protection: IP55 Thermal class: 155 F/B Weight: 175 kg Bearing, drive end: 6310 ZZ C3 Bearing, non-drive end: 6309 ZZ C3 Standard: IEC/EN 60034-1 Condition: used Location: Altenglan

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 320 h, load capacity: 227 kg, empty load weight: 988 kg, construction height: 1,780 mm, fuel type: electric, total length: 1,350 mm, drive type: Elektro, construction width: 750 mm, working height: 6,470 mm, Special aerial work platform Lhjdpfxjyafbxe Ahtek Speed class: 4 Technical condition: New Battery condition: New Description: The Genie GR-15 is a compact and maneuverable aerial work platform for working at height indoors, as well as in confined spaces. With a working height of up to 6.47 m, its narrow design, and emission-free electric drive, this machine is ideal for maintenance, assembly, and installation work in halls, schools, shopping centers, or storage areas. It easily passes through doors, elevators, and narrow work areas. For more information and a non-binding inquiry, please visit our website – Safe working at any height. In addition to this machine, we offer aerial work platforms and telescopic loaders for rent and sale. Our machines are regularly serviced and inspected. Rental, sales, service & repair. With us, you get everything from one source. Lease-purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: used, Year of construction: 2026, load capacity: 363 kg, lifting height: 4,980 mm, empty load weight: 151 kg, construction height: 1,990 mm, Specialized aerial work platform. Lhjdpfx Aszu D U Sohtok

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 22 h, load capacity: 227 kg, empty load weight: 988 kg, construction height: 1,780 mm, fuel type: electric, total length: 1,350 mm, drive type: Elektro, construction width: 750 mm, working height: 6,470 mm, Special aerial work platform Lhodpezvkbuofx Ahtok Drive class: 4 Technical condition: New Battery condition: New Description: The Genie GR-15 Runabout is a compact and maneuverable aerial work platform for working at height indoors, as well as in confined spaces. With a working height of up to 6.47 m, a narrow design, and emission-free electric drive, this unit is ideally suited for maintenance, assembly, and installation work in halls, schools, shopping centers, or storage areas. It easily passes through doors, elevators, and narrow work areas. For more information and a non-binding inquiry, please visit our website – Safe working at any height. In addition to this unit, we offer aerial work platforms and telescopic loaders for rent and sale. Our equipment is continuously serviced and inspected. Rental, sales, service & repair. You can get everything from a single source with us. Lease purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personalized advice.