Used Arburg Flanges for sale (1,917)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 13,361 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force; extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High wear-resistant version; sinter-metal check ring; CrN coating on screw and check ring • Suitable for abrasive, corrosive and high-temperature thermoplastics • Technology level 2: servo-controlled, dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Hours: 13,361 Additional equipment Fgsdpfxsyg I Egs Ap Doh • None included as listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Condition: good (used), Clutch, power clutch, gear clutch, transmission clutch, flange hub for crane chassis, wheel, bridge crane, overhead crane, assembly crane, flange hub -Flange hub: for crane chassis -Part No.: 1031 4152 suitable for gearbox ID 34705 / ID 34752 -Type: 60H7 Part 369 SDDL-5-BS-200 -Hole: Ø 60 mm -Bolt circle: Ø 170 x 15 mm -Quantity: 3 pieces available Fodpfx Aev Hcghop Djgh - Price: per piece -Dimensions: Ø 200 x 210 mm -Weight: 20.4 kg/piece

Condition: good (used), Year of construction: 1999, functionality: fully functional, Injection molding unit Type 150 Removed from an Arburg 420C 1000-350/150 Screw diameter 35 mm Fgsdpfsv Tp Ncex Ap Deh Complete with hydraulic motor, valves, etc. PRICE REDUCTION FROM 1200 TO 850 EUR!!!

Condition: good (used), Flow control valve Removed from an Arburg 420C 1000-350/150 - 2K PRICE REDUCED FROM 600 TO 500 EUR!!! Fedpfxjw Ru D Re Ap Dogh

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, clamping force: 2,157 kN, screw diameter: 35 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 220 t Screw diameter: 35 mm Fsdpfx Asy Ew Tlop Djgh MACHINE DETAILS Tie bar spacing: 520 x 520 mm Note: When purchasing multiple items from the same location (see offers below), you will be granted the lower costs for dismantling and loading.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line for 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Fodpfxey Hki Ae Ap Djgh Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Condition: excellent (used), Hydraulic pump, radial piston pump, Rexroth for Arburg Fgedozdf H Nspfx Ap Deh Moog No. D955Z8001 /H Type HZR18A1RKP100TM28R1Z00DS1 100 ccm S/N 20060056

Condition: good (used), Year of construction: 1990, Length:2000mm Width:1500mm Height:1500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Fgedozc Iw Ujpfx Ap Dsh

Condition: good (used), Friction wheel, running wheel, bridge crane, overhead crane, assembly crane, workstation crane, crane wheel, flanged wheel -Crane wheel: Flanged wheel, heavy-duty flanged wheel -Type designation: DG BM 59834544 -Impeller diameter: 225 mm Fgsdpfxszhuhij Ap Djh -Track width: up to 55 mm -Hole: Ø 60 x 55 mm -Quantity: 1 piece available -Dimensions: Ø 255 x 85 mm -Weight: 8.5 kg

Condition: good (used), overall weight: 42,000 kg, total width: 2,800 mm, total length: 12,400 mm, total height: 5,100 mm, BOLDRINI RIBO 30HY/6000 – Flanging & Dishing Machine Manufacturer: BOLDRINI (Italy) Fgedpfx Apezilu Ao Dsh Model: RIBO 30HY/6000 Type: Hydraulic Flanging & Dishing Machine Max. workpiece diameter: 6,000 mm Maximum plate thickness: 30 mm (cold forming) Year: 2002 Application: Dishing and flanging of tank heads, pressure vessel ends and dished ends. Length:12400mm Width:2800mm Height:5100mm Weight:42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1987, overall weight: 42,000 kg, total width: 6,000 mm, total length: 7,800 mm, total height: 3,900 mm, sheet thickness (max.): 22 mm, Flanging and dishing machine SCHLEIFSTEIN - KBol 4022 MACH-ID 9659 Make: SCHLEIFSTEIN Type: KBol 4022 Year: 1987 Range off edge radius Manual 20 - 500 Range off edge radius Automatic 150 - 500 Hydraulic Controllable forming roll drive Hydraulic displacement drive Clamping device without hole Max. pressure manipulator 2000 Psi / 140 bar Max. pressure press 5700 Psi / 400 bar Max. speed forming roll 170 M/Min Kunkel head forming rolls: R = 350 R = 300 R = 275 R = 250 R = 200 R = 175 R = 150   Basket bottem Knocker bottom Pressure vessel bottom Boiler bottoms Flat floor Plate base diffuser bottom Tank bottom Tank bottom Radar reflectors Engine parts Dispense air Silo hoppers Fgsdpfx Apozfi Hhj Dsh Cooker hoods Container parts Hemispheres Max. workpiece: 4600Ø Maximum sheet thickness:22mm Max. dishing radius: 700mm Min. product Ø: 800 Min. plate thickness: 4mm Min. dishing radius: 35mm Power: 90kW Length: 7800mm Width: 6000mm Height: 3900mm Weight: 42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, - Capacity 2.5 mm - Hydraulic roller adjustment Fgedsuray Sspfx Ap Deh - Axle length 250 mm - Ejection 160 mm - Roller diameter 96 mm - Foot control - Brake motor - With 4 roller sets - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2024, - Capacity 2.5 mm - Axle length 250 mm - Ejection 160 mm - Roller diameter 96 mm - Foot control - Brake motor - With 4 roller sets Fedpfx Aeur Hf Ujp Dogh - Emergency stop - Documentation - 400V

Year of construction: 1988, condition: good (used), Display-hydronico *D Arburg Year of manufacture: 1988 Fgodoxzgq Nspfx Ap Doh

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 30E7 -Connection: DN50 PN6 -Quantity: 5x valve available -Price per piece -Dimension: 150/140/H295 mm -Weight: 7.4 kg/pc. Fsdorp Ikyspfx Ap Degh

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve Fgjdpfxorp Ik Dj Ap Doh -Manufacturer: KSB, gate valve type BOA-H JL1040 without drive -Connection: DN 65 PN 6 -Quantity: 2x valve available -Price per piece -Dimension: 200/150/H180 mm -Weight: 17.7 kg/pc.

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve Fgsdpforp Ik Ijx Ap Deh -Manufacturer: KSB, gate valve shut-off valve type BOA-C JL1040 -Connection: DN100 PN6 -Quantity: 2x valve available -Price per piece -Dimension: 210/195/H420 mm -Weight: 14.8 kg/pc.

Condition: used, Chuck flange 300 mm KK8 Fjderqwquspfx Ap Degh

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN32 PN6 -Quantity: 2x valve available -Price per piece -Dimension: 180/140/H250 mm -Weight: 5.9 kg/pc. Fgjdpfx Ajrrzczsp Doh

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN20 PN16 Fgedpfx Aportcdpo Deh -Quantity: 1x valve available -Dimension: 150/130/H260 mm -Weight: 4.4 kg

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve Fedpfxjrtcdzj Ap Dsgh -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN50 PN16 -Quantity: 2x valve available -Price per piece -Dimension: 230/170/H305 mm -Weight: 10.3 kg/pc.

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: KSB, gate valve shut-off valve type BOA-C -Connection: DN50 PN6 -Quantity: 4x valve available -Price per piece -Dimension: 120/100/H210 mm Fgsdpfx Aportcd No Doh -Weight: 6 kg/pc.

Condition: excellent (used), Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, turning height: 3,000 mm, workpiece weight (max.): 30,000 kg, turning diameter: 3,500 mm, power: 100 kW (135.96 HP), REM SC 35 CNC 1S | CNC Vertical Turret Lathe | Ø3,500mm | 30 Tonnes Robust single-head CNC Vertical Turning Center from REM Bacau — engineered for high-torque, large-diameter turning with outstanding precision and reliability. TECHNICAL SPECIFICATIONS: • Max. Machining Diameter: 3,500 mm • Min. Machining Diameter: 0 mm • Max. Part Height: 3,000 mm • Max. Table Load: 30 tonnes • Table Diameter: 3,000 mm • Table Speed Range: 2–130 rpm • Main AC Motor (Turning): 100 kW • Max. Faceplate Torque (Turning): 105,000 Nm • Ram Vertical Stroke (Z-axis): specified in full datasheet KEY ADVANTAGES: ✔ Single precision head — ideal for high-accuracy turning jobs ✔ Massive 30-tonne workpiece capacity ✔ 100 kW AC main drive for continuous heavy-duty performance ✔ Full CNC control — available with Siemens or Heidenhain ✔ Rigid, thermally compensated construction Fgsdpstpnlwefx Ap Dsh Applications: Wind energy components, large flanges, rings, turbine housings, pressure vessels. Manufactured by REM Bacau – Romania | 60+ years of VTL manufacturing. Available for inspection. Worldwide export. Contact us for full datasheet, video, and quotation.

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 250 mm Fgedpowc Rvzefx Ap Deh -Adapter: short cone size 8 (Ø135-139 mm) -Bolt circle: Ø 170 mm -Dimensions: Ø 250 x 175 mm -Weight: 14.1 kg

Condition: refurbished (used), Refurbished and pressure tested. Lot of 45 flanged safety relief valves, spring loaded. Pressure ratings between 0.5 - 9 Bar. Fgedjv Dw R Njpfx Ap Deh