Used Autobond Laminating Machine for sale (65,207)

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Hsdpszwxz Ejfx Akrenu Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: like new (used), Ideal 5255 paper cutting guillotine The machine is 100% operational, after a review in very good condition. This is the currently produced model, the latest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max distance between the saddle and the knife: 520mm power supply 230V Basic features: 99 programs, each 99 steps Hnjdsz N Sgkopfx Akrou data entry via LCD touch screen electronic digital display with an accuracy of 1/10 mm electronic handwheel with stepless speed adjustment of the backgauge mm/inch switching Electromechanical drive of the knife and pressure beam Transparent safety covers laser cutting line two-hand cutting start, electronically controlled automatic return of the knife from any position Additional equipment includes: side tables, a spare knife, a split, tools for replacing the knife, including a safe grip, tapping block and documentation.

Condition: good (used), Paper guillotine EBA 5260 The machine is 100% functional, after inspection in very good condition. This is the currently produced, newest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm Hnodpfx Ajz N Sgwskrou max. distance of the saddle from the knife: 520mm 230V power supply Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter switching mm/inch Electromagnetic knife and pressure beam drive Photocells laser cutting line two-handed cutting start, electronically controlled automatic knife return from any position Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation.

Condition: good (used), Horizon HCB-2 semi-automatic machine for producing hardcover books The machine is in very good condition, little used. The task of the machine is to produce a finished cover, assemble the book block into the cover and joint forming in the finished book. The machine is very easy to set up, operate and service. The machine is equipped with the following elements: touch control monitor table for mounting the cover with a laser pointer module for wrapping veneer edges ironing rollers barcode scanner Technical data: – cover size: max. 680.6×340.8mm; min. 322.4 x 169.7 mm Hnedpfxjz N Shns Akrju – spine thickness: min. 3mm; max. 25mm – cover weight range: 105 – 160 g/m2 – speed: max. 150 cycles/hour – dimensions: 1,800 x 1,050 x 1,536mm – weight: 456kg Power supply: 230 V / 50 Hz instruction manual included and a large set of materials. Ask About The Product

Condition: excellent (used), Folding machine GUK SA30 / FA30 / 4 SVA The machine is fully operational, ready to work. Production Germany. Equipment: – 4 pockets – mobile delivery – counter with packaging function – extensive feeder, built-in compressor – soundproofing covers cassettes – Toolkit Technical data: format max. 300 x 420 mm format min. 100 x 150 mm smallest column 45 mm working speed 200m / min Hnsdpfjz N Sb Iex Akrsu 400V power supply

Condition: excellent (used), Catalog number: 8124 Hsdpsz Rpkcefx Akrenu TECHNICAL DATA - Shaft width: 510mm - 4-knife shaft - Max. thickness of workpiece on thicknesser: 200mm - Max. thickness of workpiece on side heads (3-sided): 100mm - Top: - Pawls - Toothed infeed shaft - Pressure roller - Planing shaft - Smooth outfeed shaft - Bottom: - Guide strip - Adjustable rollers in the lower table, 2 pcs - Rear: - Side spindles + pressure roller, 2 pcs - Spindle height: 100mm - Spindle diameter: 30mm - Adjustable spindles (left/right) - Side spindle motors: 2 x approx. 1.5kW - Main motor: 7.5kW - 2 types of feed speed - Dust extraction port: 2 x 100mm, 1 x 120mm - Overall dimensions (L/W/H): 1700x1300x1160mm - Weight: 1103kg ADVANTAGES - Polish-made - Shaft with 4 knives - Used planer, very good condition Net price: 14900 PLN Net price: 3470 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 8125 TECHNICAL DATA PLANER: - roller width 410mm - 3-knife roller - adjustable angle guide - table length 1800mm - both tables adjustable JOINTER: - max thickness of workpiece on the jointer 180mm - guard on the jointer roller – from above: - pawls - infeed roller, toothed - planing roller - outfeed roller, smooth – with horizontal drilling machine: - max tool diameter 16mm - max hole depth 120mm - max milling length 200mm - front/rear adjustment with drilling unit - table adjustment up/down and sideways - adjustable roller in the lower table - 2 feed speed options 8/12m/min - main motor 4kW CIRCULAR SAW: - max blade diameter 350mm - max cutting height (for a 300mm blade) 45mm - blade arbor diameter 30mm - blade adjustable up/down - cutting width with guide 350mm - cutting width on the carriage 500mm - table dimensions 1230x530mm - with carriage + miter gauge - blade guard - motor power 3kW MILLING MACHINE: - spindle 30mm - spindle adjustable up/down - spindle height 80mm - guide - rotation right/left - dust extraction nozzle diameter 120mm - dimensions L/W/H 2800x2300x1050mm - weight approximately 1000kg FEATURES – with drilling machine Hedpfjz Rpl Tox Akrjnu – guard on the jointer roller – very good condition, used machine Net price: 16900 PLN Net price: 3930 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 1964, controller manufacturer: Siemens, controller model: SIMATIC HMI TP700 / KP400, _____ Description: Year of manuf. : 1964 Control : Siemens SIMATIC HMI TP700 / KP400 Grinding width : 203 mm General: Year of manufacture:1964, fully overhauled in 2015 (Huttelmaier) Weights:Total weight of the unit approx. 8,025 :kg Footprint:approx. 6,000 x 4,085 mm Grinding unit: Process:Centreless cylindrical grinding Grinding wheel:Ø 380–508 mm, width 25–203 mm, bore Dressing wheel:Ø 247–330 mm, width 25–203 mm, bore Wheel material:Corundum Dressing:Dressers for grinding and regulating wheels, Balancing:MPM BM50 automatic balancing system Feed:Motorised feed axis INK increments:0.001 / 0.005 / 0.010 / 0.100 mm Controls: Control system:Siemens SIMATIC, retrofitted in 2015 Front-panel operation:SIMATIC HMI TP700 touch panel Rear-panel operation:SIMATIC HMI KP400 control panel Operating modes:Automatic, Manual :Through-feed/plunge grinding: :Key switch on the control panel Menu pages:Dresser, grinding wheel and control wheel Plant engineering: Parts feeding:Feeding conveyor with two-hand operation Hnodpoz Rtqtofx Akrju Discharge:Frasch FP66N-zw belt conveyor, :Rotary table (Semotec) for finished parts Coolant lubrication:POLO Filtertechnik unit Chip management:Extraction system, switchable via auxiliary units Hydraulics:Nold Hydraulik und Pneumatik hydraulic power unit Lubrication:Central lubrication unit with :level indicator Interface:Feeding system for plunge cutting

Condition: used, Year of construction: 2015, CNC laser cutting machine, fiber laser 3kW Manufacturer: Microstep Type: FIBERLAS MSF 4001.20BL Year of manufacture: 2015 With drilling unit + tool changer Complete system consisting of: - Cutting machine, - IPG fiber laser source, - HIGHYAG cutting head, and - KEMPER extraction system. Laser IPG Ytterblum Laser System YLS-3000-CUT-Y14 Rated power: 3,000 W (3kW) Operating mode: CW / modulated Power consumption: approx. 9 kW max. (8.3 kW typical) at 3,000 W Cooling: IPG air-water chiller Operating hours: approx. 26,819 h Dimensions: W/D/H: 1,004 x 804 x 556 mm Cutting head II-VI HIGHYAG BIMO-FSC Permissible laser power: up to 4 kW Focal length f: 150 mm (focusing module 1.5) Focus diameter: approx. 300 µm at 200 µm optical fiber Weight: approx. 6.2 kg Hsdpfszhtp Ejx Akrjnu Extraction system KEMPER SYSTEM 8000 Extraction capacity: 5,000 m³/h Filter area: 50 m² Filter: KEMPER KemTex ePTFE membrane filter Certification: IFA-tested, welding fume class W3 (high-alloy steels) Availability from 10/2026 Reference No.: C2177 121026ä

Condition: like new (used), Year of construction: 2006, operating hours: 500 h, functionality: fully functional, Control unit: SIEMENS Sinumerik 840D Solutionsline Table clamping surface: 650 x 410 mm Max. table load: 250 kg T-slots: 3x 14 mm X-axis travel: 560 mm Y-axis travel: 410 mm Z-axis travel: 410 mm Spindle speed range: max. 12,000 rpm Spindle drive power: 12 / 18 kW Tool magazine capacity: 24 positions Max. tool diameter: 77 mm Max. tool diameter (with vacant adjacent slots): 125 mm Max. tool length: 200 mm Max. tool weight: 5.0 kg Tool change time: approx. 1.3 sec Rapid traverse (X / Y / Z): 48 m/min Total power requirement: approx. 30 kW Machine weight: approx. 4.0 tons Required floor space: approx. 3000 x 2000 x 2500 mm Equipment and Accessories: - NC rotary table (2-axis) - Coolant system - Spindle chiller - Machine feet Hnedpfx Akey U Hw Ejrju The machine is located in our showroom and can be inspected under power. It has very little working hours since it was in a technical school's workshop.

Condition: ready for operation (used), Year of construction: 1989, CSEPEL GEAR GRINDER FKA 326-10 – 2 units available THE MACHINE USES THE FASSLER DRESSING METHOD. • Gear diameter: 320 mm • Module range: 0.5 – 6 • Slide stroke: 180 mm • Number of teeth: 10 – 260 • Max workpiece weight: 80 kg • Clamping length: 420 mm Hnodpfx Akezxzlijrsu MACHINES ARE COMPLETE WITH NUMEROUS ACCESSORIES: WHEELS, WHEEL HOLDERS, FASSLER, CHANGE GEARS Machines are in working order!

Condition: used, Year of construction: 1995, CNC portal flame cutting machine Manufacturer: Messer Type: Omnimat P 7000 Year of manufacture: 1995 CNC control: Global Control Plus Track gauge: 7,000 mm Hnsdpfoyay Dhjx Akrsu 8 x oxy-fuel torches, type ALFA 8 x Omnilift 200 Without rail Without table Without filter 121026ä

Condition: new, Year of construction: 2027, neu 2027 080259 Dezember 2026, Zwischenve Türkei 6130 € 118.31 € 1050 mm 1.5 mm 1 mm 2.2 mm 150 ° 500 mm 200 mm 1300 mm 750 mm 1515 mm 280 kg Hjdpfowiqwrox Akrsnu Verstellbereich 35 mm Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC Manual back gauge Adjustable angle gauge Shelve and box for tools Machine on rolls with brakes Operating manual in German or English

Condition: excellent (used), Year of construction: 1974, Equippment: 1 Gripper feeding system right hand side 1 Eccentricpress 90 kN 3 Standard-slide-units 3 Narrow-slide-units Hodjpq H Upepfx Akrjnu Working range: Wire diameter range: 0,5 - 3,5 mm Stripmetal width: max. 32 mm Feeding length: max. 170 mm Output: max. 250/min.

Condition: excellent (used), Year of construction: 2013, operating hours: 7,100 h, functionality: fully functional, HAAS control with LCD screen and USB interface Table dimensions: 1219 x 457 mm Max. table load: 1588 kg T-slots in table: 16 x 80 x 5 mm X-axis: 1016 mm Y-axis: 508 mm Z-axis: 635 mm Distance from spindle nose to machine table: 107 - 742 mm Spindle speed: 8100 rpm Drive power: 22.4 kW Rapid traverse X/Y/Z = 24.5 m/min Tool changer: 20-fold (or 20-station) Weight: 5320 kg Dimensions LxWxH = 3400 x 2400 x 2600 mm Equipment, Accessories - Coolant system - Chip auger - RENISHAW zero-point probing system with OMP60 probe - RENISHAW tool setter (not mounted) - Machine feet - Documentation Hnedpsz R Altsfx Akrsu The machine has been used very little and is in very good condition. It is still under power in Hungary. First owner. It was purchased as new in Hungary and has not run long hours.

Condition: used, A very rare Hapfo Type AP-9000-M hydraulic automatic wood-copying, milling and turning machine for turning round profiles such as balusters, table legs and lamp parts using a copying turning tool, as well as milling profiles using a milling unit and fluting curved workpieces. The machine has two unit stations and an additional milling unit. Includes two hydraulic copying units, a milling unit, a hand rest and a comprehensive range of accessories. Technical data: - Centre-to-centre distance: 330 mm - Max. workpiece diameter: 450 mm - Centre-to-centre distance: 4,100 mm - Power consumption: 7.6 kW Hedpjzzkf Rsfx Akronu - L x W x H: 5,800 x 1,100 x 1,500 mm - Weight: ~ 2,000 kg

Condition: used, Year of construction: 2000, total power requirements: 2,2length of saw band: 3200cutting area width: 3200messurements (LxWxH): 2000 x 7000 x 1400weight approx.: 1500saw band dimension: 27 x 0,9Metal Bandsaw Bauer HS320GLZA Used horizontal metal bandsaw by Bauer, model HS320GLZA, year of manufacture 2000. The machine is equipped with automatic feed and is suitable for precise cutting of metal, pipes, and profiles in industrial and workshop use. Approx. dimensions: 200 x 700 x 140 cm.A roller conveyor system with a length of approx. [ 5000 mm] is included. Hedpfx Akey Nuhnjronu The machine is used and located in our workshop. Viewing is possible on site. Location: 3071 Böheimkirchen, Neustiftgasse 34.

Condition: used, pressure: 70throat depth: 750messurements (LxWxH): ca. 900 x 2300 x 1900 Hole punch GEKA Puma 70/E-750 The positioning table is unfortunately defective; otherwise, the machine is in good used condition. Specifications: Punching force            70 t Punching capacity      27 in 20 mm Punches max. Drm.    70 in 8.0 mm or Drm.                        100 in 5.0 mm or Rectangular             50 in 8.0 mm or Rectangular             60 in 7.0 mm Hsdpswrkcyjfx Akronu or Rectangular             70 in 6.0 mm Projection                     750 with -Foot switch

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Overhauled tensioning machine 2025 - for blades with widths up to 210 mm - mounted on a sliding carriage with flywheel drive for tensioning along two parallel lines along the blade length - tension pressure adjustable and controllable gradually - includes a hammer for correcting possible imperfections, with straightness ruler (flatness) - 0.75 kW motor - table with 4 legs for supporting the blade Hedpfx Aew Ewd Dekrenu

Condition: good (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, controller model: Siemens Sinumerik 840D, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,530 mm, travel distance Z-axis: 160 mm, Equipment: documentation/manual, Machine DURMA HD-FL 3015 III – 4 kW Year of manufacture: End of 2018 (as new) — Technical Data • Working area (X-Y-Z): 3060 × 1530 × 160 mm • Max. sheet size: 3048 × 1524 mm • Max. sheet weight: 200 kg/m² Maximum sheet thicknesses: • Mild steel: 20 mm • Stainless steel: 14 mm • Aluminium (AlMg3): 12 mm Dynamics & Precision: • Travel speed X-Y: 200 m/min • Synchronisation speed: 280 m/min • Acceleration: 20 m/s² Hjdpoynbbqsfx Akrjnu • Positioning accuracy: ± 0.02 mm • Repeatability: ± 0.1 mm — Standard Equipment • CE-compliant version with shuttle table & light curtain safety system • Siemens SINUMERIK 840D CNC control • Precitec ProCutter cutting head F150 (auto-focus) • Automatic pallet changer system • Automatic sheet inspection (position & size) • Positioning laser diode • Automatic nozzle cleaning • Central lubrication system • Chip conveyor • User interface (power / speed / pressure) • External Metalix CAD/CAM software with autonesting • Illuminated working area • Multi-chamber extraction system • Warning beacon — Special Accessories • IPG 4000 W fiber laser source incl. chiller & compact extraction unit • Motorized chip conveyor • Linear drives for X1, X2, Y axes • Laser service kit • Automatic nozzle changer • Additional Metalix license — Special Arrangements • Roller container for slag & small parts (operator side) • Laser source, chiller & extraction system mounted above the machine • Machine frame to be manufactured by the customer

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP P200M, total height: 2,950 mm, total length: 2,900 mm, total width: 2,600 mm, rotary table diameter: 400 mm, rotational speed (min.): 25 rpm, rotational speed (max.): 15,000 rpm, overall weight: 8,000 kg, operating hours of spindle: 18,500 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, OKUMA MU-400V with OKUMA OSP P200M CNC Control 5-axis CNC machining center Spindle drive 50-15,000 rpm (ISO40/BIGPLUS) 22 kW / 198 Nm Tool changer SK40 according to DIN 69871 (BT40) Tool changer with 32 magazine positions Electronically controlled spindle head flushing system Thermal compensation and machine body ventilation system for compensation or reduction of thermal errors (TAS-S and TAS-C) Hjdpfx Akeyq Sl Ejrjnu Coolant supply through the spindle 15 bar / 20 l/min Double screw chip conveyor for chip removal from the working area Synchronous tapping and thread milling Removable electronic handwheel 100 workpiece zero points 200 tool length and 200 tool radius offsets LCD color display OKUMA I-MAP auxiliary dialog 2 USB 2.0 ports Ethernet interface with browser and DNC-T1 for program transfer Work area shower cooling system Hinged belt chip conveyor, discharge height 1000 mm Tool breakage monitoring and tool length measurement

Condition: excellent (used), A robust industrial machine of German manufacture, Walther Trowal, model DLT 4, year 1980. This device is designed for surface treatment of metal, aluminum, or plastic parts – the trowalizing process (deburring, edge rounding, polishing, cleaning). A classic drum design – reliable, massive, and durable, typical of “West Germany” production. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Rotational speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • The machine is complete, and the drum rotates smoothly and evenly. • Perforation and interior are in good condition. • No signs of cracks or structural damage. • Requires electrical connection and possibly a service inspection. • Ideal for a tool shop, machining facility, or production line. Applications: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Processing screws, bushings, stamped parts, castings, and precision parts. Condition: used, solid, classic Walther Trowal design – requires minor refurbishment or is ready for immediate use. Hsdpfx Aez Slhuekrenu

Condition: excellent (used), For sale: an industrial deburring machine from the German company Rolei Eisenblätter GmbH, model PEF 500. This device is designed for the precise removal of burrs, chamfering, and preparing the edges of steel, aluminum, and other metal parts. Manufacturer: Rolei Eisenblätter GmbH, Germany Model: PEF 500 Hodpfxez Slc Es Akrjnu Robust, steel construction V-shaped work table, ideal for guiding components Electric drive with safety switch Application: edge finishing, chamfering, weld preparation, burr removal after cutting and machining The machine is in good working order and technical condition. The construction is very stable, making it ideal for workshops, metalworking shops, tool rooms, and serial production.

Condition: used, For sale: Professional pipe beveling/chamfering machine by FEIN with GF (Georg Fischer) RA4 head, mounted on a solid workshop stand for pipe processing. This device is used for beveling pipe ends prior to welding—preparing a V-type weld edge. Industrial equipment used in pipeline workshops, industrial installations, and when constructing process plant systems. The machine is of very robust construction, made in Germany. Comfortable operation thanks to a stable stand. Technical data • Drive manufacturer: FEIN – Made in Germany • Model: 680 CB1641 • Power: 1600 W • Voltage: 200–240 V • Frequency: 50–60 Hz • Current: 8.8 A • Speed: 150–270 rpm Head • Manufacturer: Georg Fischer (GF) • Type: RA4 Applications • Pipe beveling Hsdpfxsz Slqpo Akronu • Pipe preparation for welding • Pipeline work • Welding workshops • Industrial installations Visual and technical condition as shown in the photos. Solid industrial-grade machine.

Condition: used, • Completely refurbished by us Hnsdpez Snxbjfx Akreu • Glass thickness: 2-12 mm • Minimum dimensions: 150 x 150 mm • Maximum glass width: 700 mm • Dimensions: L = 2400 mm, W = 1400 mm, H = 1200 mm • Connection values: 380/50 V, 13 kW • Price available upon request