Used Balance Weight for sale (61,923)

Condition: new, functionality: fully functional, machine/vehicle number: 10401475, empty load weight: 180 kg, maximum load weight: 570 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,250 mm, loading space height: 440 mm, Year of construction: 2026, Product information "Koch covered trailer 125x250cm, height: 65cm, 750kg | Type U4" Covered trailer 125x250cm, 750kg, "Type U4" Car trailer with cover, Type U4, with a loading area of 125 x 250 x 65cm. Lightweight aluminum trailer with a permissible total weight of 750kg and a payload of 570kg, including a 10-year warranty. Koch-Anhängerwerke has been manufacturing high-quality trailers made in Germany for over 30 years. Special features: Double-walled, anodized aluminum side wall 30mm (unique) Side wall with cargo securing system in V2A stainless steel (unique) Very stable rear door latches made of V2A stainless steel (unique) Side wall fastening completely with 8 mm V2A stainless steel (unique) Four-sided lashing rail/rail on the cover (unique) 2x M16 threaded tension anchors / stable threaded rods at the rear (unique) Additional features: Rear door easily removable Base plate: stable screen-printed base, non-slip birch plywood, waterproof glued Axle and drawbar completely hot-dip galvanized, manufacturer ALKO Large 185/70 R13 tires, balanced and suitable for 100 km/h Steel sheet mudguards fastened with 8 mm stainless steel screws 12 Volt electrical system, 13-pin plug with reversing light Psdpfsi R Hwxex Alwjgt Cover: solid aluminum with 8 mm V2a fastening Stable V2a cover lock at the rear with disc lock 2 stable V2a stainless steel hinges at the front 2 gas struts for easy opening Cover easily removable Other: Vehicle registration document / registration certificate part 2 If you would like to purchase this trailer or have further questions, please use our internal box trailer "No. 10401475".

Condition: good (used), V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing Pgodpfect H T Tsx Alwet -Diameter: 507 mm -Total width: 158 mm -Belts: 8 -V-belt width: 17 mm -Taper bushing mount: Ø 70 mm (can be replaced) -Pulley: balanced -Weight: 61 kg -other pulleys in stock

Condition: new, Year of construction: 2026, Semiautomatic multi-product filling station equipped with precision balance. The operator positions the empty bag under the bag-holder and the bagging machine fills it quickly and with maximum precision thanks to the automatic weighing system. The product is extracted from the hopper via a conveyor belt driven by a gear reducer. Wide mouth hopper for easy filling with mechanical shovel or other system. Side and rear couplings for forklift forks to facilitate transport.       Specification bagging machine with hopper ARK01: Pjdpfx Alod Nqvnewjgt - Bagging capacity 3-4 tons / hour - Hopper capacity 2 m³ (heaped) - Overall dimensions L 210cm x L 260cm x H 225cm - Total weight is about 400 Kg - Precision weighing +/- 100 grams - Possibility to prepare bags from 1 to 50 kg * -Wiring for power line connection - Manual tilting gate to regulate the quantity in outflow - Vertical tilting scale support to adjust the height based on the bags used - Command hospital - 400V three-phase power supply - Instruction manual - Made in EU

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,000 mm, height adjustment type: electric, total height: 2,200 mm, total length: 3,550 mm, total width: 2,000 mm, overall weight: 870 kg, grinding length: 1,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration - CE version The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Pgedpetwb U Ajfx Alwst Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Condition: new, Compressed air strip nailer 6512/130 SQ for nails up to 130 mm long Applications: Carpentry, roofing, packaging, interior finishing, prefabricated house construction, timber formwork, battens, crate and pallet construction, fence construction, load securing, etc. - Single release - For paper-loaded safety strip nails - Eurocode 5 nails in accordance with DIN EN 14592 - User-friendly driving depth adjustment - Robust and powerful - Optimally silenced and balanced Technical data: Podpfjvcl Slex Alwogt - Release type Single release - Air consumption per driving operation 5.40 liters - Nail lengths from 90 to 130 mm - Nail diameter 3.4 - 4.2 mm - Nail series 34° safety strip nails - Magazine capacity 75 nails - Weight 6.60 kg - Length x width x height 470 x 150 x 460 mm The nailer is new and unused. Only traces of storage may be present, as the device was hanging in our showroom. You will receive an invoice with VAT shown. Payment: Prepayment by bank transfer - NO PAYPAL! If you have any questions, please do not hesitate to contact us.

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DC1500 Cyclone Dust Collector – Professional Dust and Wood Chip Extraction System The CORMAK DC1500 cyclone dust collector is a high-performance extraction system designed for efficient removal of wood chips, sawdust, and fine dust generated during woodworking and industrial production. Featuring a cyclone separator combined with a dual-stage filtration system, the DC1500 effectively separates coarse and fine particles, ensuring cleaner air, improved workplace safety, and extended filter life. It is suitable for both dry and damp materials, making it a versatile solution for demanding workshop environments. Key advantages Dual-stage filtration system – efficiently separates coarse chips and fine dust particles. Cyclone separator – provides highly effective pre-separation of sawdust and debris before filtration. High-performance centrifugal fan – delivers strong suction with quiet operation. Remote control operation – convenient wireless control for improved operator comfort. Compact design – fits easily into workshops with limited floor space. Heavy-duty steel collection container – durable construction for long service life. Mobile design – four heavy-duty caster wheels allow easy transport around the workshop. Construction and technology The CORMAK DC1500 is equipped with an advanced cyclone separator and an integrated dust filter, significantly improving filtration efficiency while reducing filter maintenance. High-quality seals in critical areas minimize pressure losses and maximize suction performance. An integrated vacuum pressure gauge allows continuous monitoring of system performance, while the dynamically balanced centrifugal fan ensures reliable, uninterrupted operation. Precision and performance With an extraction capacity of up to 3,200 m³/h, the DC1500 ranks among the most efficient dust collection systems in its class. Its 1.5 kW motor provides powerful suction while maintaining low energy consumption, making it an economical solution for continuous industrial use. Applications The CORMAK DC1500 cyclone dust collector is ideal for: woodworking workshops furniture manufacturing facilities wood, plastic, and metal processing plants central dust extraction systems professional craft and production workshops It efficiently removes both dry and damp sawdust, wood chips, and fine production dust, helping maintain a clean and safe working environment. Standard equipment Remote control Cyclone separator High-efficiency dust filter Heavy-duty steel collection container Mobile base with four caster wheels Vacuum pressure gauge Optional equipment Podpfxovuzvko Alwjgt Flexible suction hoses Hose diameter reducers and adapters Additional HEPA filter kits Technical specifications Parameter Value Airflow capacity 3,200 m³/h Maximum vacuum 2,040 Pa Noise level 70 dB Motor speed 2,850 rpm Suction inlet 3 × 100 mm / 1 × 150 mm Collection containers 2 Motor power 1.5 kW / 230 V Overall dimensions 1250 × 650 × 1720 mm Weight 100 kg

Condition: as good as new (ex-display), Year of construction: 2024, Capacity: 5.000 kN Specification: Threshold setting: Reading begins at 1% of capacity (50 kN) Resolution: 10 kN Pgsdpfx Aefpwk Rolwet Inaccuracy: +/-0.5 % of Full Scale (F.S.) Non-linearity: +/-0.3% F.S. Non-repeatability: +/-0.l% F.S. Temperature Range: 0° C. to 70° C Temperature Effect on F.S. output: +/-0.001% F.S./DEG. F. on no-load output: No effect (has auto- zero balance circuit) Overload: 150% of capacity (7.500 kN) Sampling rate: Three measurements per second Operation mode: Peak or Track Strokes per minute: Single stroke device, automatic reset on each stroke Power: Standard 9V alkaline battery Approx. 30 hours of continuous use Has low battery indicator Tons Display: 3 1/2 digit LED (0.56" high) Dimensions: app. 230 L x 190 W mm, height app. 180mm Height sets to 7.0000" +/- 0.0005" Weight: app. 32 kg inckuding carrying box with analog output

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. Pedpfsfg E H Tsx Alwsgt The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: as good as new (ex-display), Year of construction: 2025, Studer S40 1000/1600 Grinding length: 1,000/1,600 mm Center height: 175 mm (optionally more) Workpiece weight: 120 kg Additional freely selectable options: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control - Quick setup via GSN user interface - B-axis freely positionable - Second external grinding wheel - Internal grinding unit - Center height adjustment - Dressing spindle for diamond dressing roll - Balancing and finishing sensor - Hydraulic clamping/releasing of the tailstock - Automatic Siemens door drive - 19" / 22" screen - Remote maintenance - Conversion to needle nozzles - Matching coolant/extraction system - Automation preparation - and much more We would also be happy to overhaul your existing machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and others. Pgjdsfg S Uaopfx Alwjt

Condition: refurbished (used), Year of construction: 2025, Schaudt PS51 S600 - Premium Refurbished - Grinding length: 600 mm - Center height: 180 mm - Grinding wheel width: 220 mm (More possible as an option) - Workpiece weight: 200 kg Additional options that can be freely selected: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus - Quick setup via GSN operator interface - In-process measuring control DMK / LMK - Grinding spindle for diamond form wheel - Balancing and truing sensor system - Hydraulic clamping/releasing of the tailstock - Automatic Siemens door drive - Remote maintenance - Conversion to needle nozzles - Matching coolant / extraction system - Automation preparation - and more Podjfg Utdspfx Alwsgt We would be happy to refurbish your existing machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and more.

Condition: new, Year of construction: 2026, A versatile saw for cutting wood for veneers, lamellas and the like. Height of workpieces up to 400 mm. The powerful feed rate gives a very high performance. The R800 is a solid saw. In the R800, it is possible to use tapes of different widths. It is equipped with a mechanical feed of the workpiece. It is designed so as to easily cope with work in conditions of high load of the main engine and high processing speed (up to 30 m / min). It is possible to use a tape with a width of 80mm. The sturdy frame of the machine is made of welded sheet steel. Massive flywheels made of cast iron ensure maximum efficiency, and the wheels are mounted on dustproof ball bearings. The lower part of the saw blade is specially reinforced, which allows a higher degree of inertia (inertia) to be achieved without excessive starting and braking loads. To further improve the evenness of work, the guides are specially ground so that they remain carefully balanced. Diameter of saw wheels 800 mm Max. cutting height 400 mm Max.cutting width 770 mm Height of table from 960 mm Table size 1060 x 800 mm Max. and min. blade length 5530/5380 mm Width of blade 80 x 0,8 mm Motor power 11 (HP 15) kW R.P.M. of wheels 680 R.P. M. Sawblade speed 28,5 mt./sec. Sawdust hoods 1 Ø 100 mm. 2 Ø 120 mm. Required capacity for extraction system (for air speed 20 mt./sec.) 3840 m3/h Compressed air consumption 60 Lt./min. Working pressure of pneumatic brake 6 - 8 bar Net weight 880 kg RVP210 Height of feeding roller 50 mm Feeding roller diameter 200 nm Pgsdpjgp I U Nofx Alwot Standard feeding rollers 2 nr. Height of standard rollers fence 300 mm Length of Rollers fence 600 mm Rollers fence tilt 0-45° Max. Roller-blade clearance 200 mt/sec Max. fence-blade clearance 420 mm Motor power 0,37 kW Variable feed speed rate 0-30 mt./min Compressed air consumption 30 Lt/min. Working pressure 3 - 6 bar Net weight 180 Kg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 75 kW (101.97 HP), Jaw crusher for stone & ore crushing in quarry and mining fields Model: PE600X900 Pedeq H Shcopfx Alwogt Max input size: 500mm Capacity: 80-135 t/h Motor: 75KW Weight: 15T Besides this models, we also have the other models like PE900X1200, PE500X750, PE250X400, PE400X600, etc, and we also have impact crusher, cone crusher, hammer crusher, vsi crusher, more important we can also provide complete stone crushing screening plant with capacity 30-1000 t/h, welcome to contact us for more details if you want a different model or the other type of crushing machine. You can leave us a message if you need a different model or a different type of crusher.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Pgsdpfeq H Sqdex Alwst Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. Psdpfx Aleq Igyvewsgt B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, Year of construction: 2026, HSI Crusher and Impact Crusher: Efficient Solutions for Limestone and Talc Crushing Introduction An HSI crusher (Horizontal Shaft Impact crusher) is a highly efficient crushing machine widely used in mining, quarrying, and aggregate production. As a key component in a limestone crushing plant, it delivers precise shaping and high reduction ratios. Whether used as a limestone crusher or talc crusher, the HSI impact crusher ensures consistent particle size and superior performance across various materials. Features of HSI Impact Crusher High Crushing Efficiency The impact mechanism uses high-speed rotors and blow bars to achieve fine and uniform crushing results. Versatile Applications Suitable for medium-hard to soft materials such as limestone, talc, gypsum, and coal. Adjustable Output Size Hydraulic or mechanical adjustment systems allow easy control of product size. Durable Components Wear-resistant blow bars and liners extend service life and reduce maintenance costs. Easy Maintenance Quick access doors and modular design simplify inspection and part replacement. Energy Efficiency Optimized rotor design and balanced operation minimize energy consumption. Technical Specifications (Typical Range) Model:1214 Max input size： 300 mm, Capacity: 100-140 t/h Model:1315 Max input size: 350mm Capacity: 150-200 t/h Specifications may vary depending on material hardness and feed size. Applications Limestone Crushing Plant: Primary or secondary crushing of limestone for cement, aggregates, and construction materials. Talc Crusher: Fine crushing of soft minerals like talc and gypsum for powder production. Aggregate Production: Produces cubical-shaped aggregates ideal for asphalt and concrete. Recycling: Effective for crushing concrete, asphalt, and demolition waste. Why Choose a Reliable Impact Crusher Manufacturer Selecting a trusted impact crusher manufacturer ensures high-quality materials, advanced design, and reliable after-sales service. A professional supplier provides customized solutions for specific materials, such as limestone crusher or talc crusher, ensuring optimal performance and long-term durability. Impact Crusher for Sale Modern impact crushers for sale feature advanced automation, energy-saving systems, and improved wear resistance. They are ideal for operators seeking high productivity, low operating costs, and consistent output quality in both stationary and mobile crushing setups. Pgedpfxjq Ny Sae Alwet Conclusion An HSI impact crusher is a versatile and efficient solution for crushing limestone, talc, and other medium-soft materials. With robust design, adjustable settings, and high throughput, it plays a vital role in any limestone crushing plant or mineral processing line. Choosing the right impact crusher manufacturer ensures reliable performance, reduced downtime, and long-term value.

Condition: excellent (used), GRP transport box Bundeswehr container pressure-tight & watertight, 50x50x50cm. Manufacturer Maibach We can offer you these great boxes from Bundeswehr depot stocks! This extremely robust GRP transport box from Bundeswehr stocks is not only perfectly protected against dust and water ingress, it also has a pressure equalization valve and a moisture indicator! Thanks to this special equipment, all types of goods can be stored in almost all regions of the world, as both humidity and fluctuating pressure can be perfectly monitored and balanced. The containers protect the packaged goods perfectly against impact and shock, against moisture and wetness and in changing climates and extreme climatic conditions! The pictures show the box without and with interior fittings made of solid foam - these are usually supplied, but can easily be removed. We cannot guarantee that it is included with every box, so please inform us at the time of purchase if you cannot do without the inner lining! The price is always for a complete box with lid! Dimensions: 500mm x 500mm x 500mm Capacity 125 liters Weight: 17 kg empty, 19 kg with solid foam interior The containers are in good all-round optical and technical condition. There are color changes, traces of transport and slight adhesive residue from shipping bags etc., but these do not limit the usability in any way. We also have hundreds of boxes in other sizes in stock, just ask! Product properties: - Pressure and vapor-tight (air and water-tight) - air-tight according to LTR 8145 - equipped with corrosion-resistant tension locks and - resetting carrying handles - stackable with all sizes thanks to the dimpled grid system Pgsdpfx Ajqziitelwjt Sales are made exclusively to traders, you will of course receive an invoice with VAT shown. Private buyers have the option of purchasing the boxes "on behalf of a customer", direct commercial sales to private individuals are expressly excluded! The goods are sold under exclusion of any warranty or liability for material defects. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: good (used), GFK transport box Bundeswehr container, dust and waterproof, 80x80x40cm. From depot stocks of the Bundeswehr we can offer you these great boxes! Pgedpfenvd Raox Alwst This extremely robust GRP transport box from Bundeswehr stock is not only perfectly protected against dust and water ingress, it also has a pressure equalization valve and a moisture indicator! Through this special equipment, all kinds of goods can be stored in almost all regions of the world, because both the humidity and a fluctuating pressure can be perfectly monitored and balanced. The containers perfectly protect the packaged goods against shock and impact, against humidity and moisture and in alternating climates and extreme climatic effects! The pictures show the box with and without skids for driving underneath - these are usually not supplied. We can not guarantee that they are present in every box, so please inform us if you can not do without the skids in any case when buying! The price is always for a complete box with lid! Dimensions: 800mm x 800mm x 400mm Capacity 256 liters Weight: 35kg empty, 42kg with solid foam interior The containers are in a visually and technically good condition. Color changes, transport traces as well as slight adhesive residues from shipping bags etc. are present, but do not limit the usability in any way. We have hundreds of boxes also in other sizes in stock, just ask! Product properties: - pressure- and vapor-tight (air- and water-tight) - air-loadable according to LTR 8145 - provided with corrosion-resistant tension locks and - resetting carrying handles - stackable with all sizes due to the dimpled grid system The sale is exclusively to tradesmen, you will of course receive an invoice with VAT. Private buyers have the opportunity to purchase the boxes "on behalf of customers", a direct commercial sale to private individuals is expressly not made! The goods are sold under exclusion of any warranty or liability for material defects. The exclusion does not apply to claims for damages from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health. If you have any questions regarding prices or technical details, please do not hesitate to contact us at the address given.

Condition: used, Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve, balancing valve -Manufacturer: TA Hydronics, line regulation valve regulation valve, unused original packaging Pgodpoiqy Tpefx Alwjt -Type: STAF-SG DN50 PN25 -Number: 3x valve available -Price per piece -Dimensions cardboard: 220/170/H270 mm -Weight: 6.8 kg/pcs

Condition: new, Year of construction: 2026, Motor, three-phase, 400V with frequency inverter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Saw band dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard equipment Precise drive controlled via a frequency inverter Digital speed display Continuously variable belt speed Balanced band pulleys Hard rubberized running surfaces Hardened and ground guide jaws LED work light Height-adjustable guide arm Machine color RAL 7005 / RAL 7035 12 months warranty for single-shift operation OPTIONAL, article no. 410.020 Podpfx Alsir Ey Iswegt Machine price € 15,450,- including minimum quantity lubrication and length stop DELIVERY: FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, TECHNICAL DETAILS - Axes number : 6 - Centers height : 175 [mm] - Distance between centers : 650[mm] LINEAR AXES - Grinding length : 800 mm - Strokes X x Z: 310 X 850 [mm] GRINDING WHEEL HOLDERS HEADSTOCK - Taper type : - Continuous orientation ( B axe) : +/- 9 [°] - C Axis indexing precision ( High speed machining): 0.001 [°] - External grinding wheel dimensions : 500 x 80 x 20 [mm] - Grinding wheel holder headstock power : 12.5.5 [kW] - Rotation speed : 1400-3200 [Rpm] PART HOLDER HEADSTOCK - Taper type : ISO50 - Axis C indexing precision : 0.001 [°] - Power : 4[kW] - Rotation speed : 1-1000 [Rpm] SYNCHRONIZED COUNTER SPINDLE - Taper type : CM4 - Quill stroke (w axe) : 90 [mm] - Quill diameter : 50 [mm] - Power :1.6[kW] - Max. part weight between centers :50 [Kg] ELECTRICAL SUPPLY - Supply tension : 400 [V] 50[Hz] MACHINE HOURS - Number of working hours : 36000 EQUIPMENT - CNC FANUC 31i-A control - Sofwares * StuderWIN * Pictogramming * StuderThread only cycles * StuderTechnilogy - Remote control with electronic handle - Measuring rules on axes X and Z - Automatic length probe arm MOVOMATIC C25 - In-process external diameter probe arm MOVOMATIC DM205 - Coolant tank 375 liters - Paper filter - Oil mist aspiration - Grinding wheel loading arm - Dressing wheel diamond device ( Dia 100mm) - SENSITRON Pedpfx Aju Haf Eolwjgt - Automotic dynamic balancing DittelM6000 - Grinding wheel holder flanges - Interface for AROBOTECH steady - Interface B3 PROFIBUS for automatic loading

Condition: new, functionality: fully functional, grinding length: 1,000 mm, grinding width: 500 mm, total height: 2,400 mm, total length: 4,445 mm, total width: 2,100 mm, grinding wheel diameter: 355 mm, distance table to spindle center: 550 mm, grinding wheel width: 38 mm, spindle speed (max.): 1,450 rpm, overall weight: 5,800 kg, grinding spindle speed: 1,450 rpm, Table surface area: 1000 x 500 mm Maximum table load: 1000 kg (including magnetic clamping plate) Grinding spindle motor: 5.5 kW Guide system: Flat guides Machine weight: approx. 5800 kg Operation/Control: Servo-controlled vertical feed in the grinding cycle Electric transverse movement with programmable reversing points via the control panel Electronic handwheel Mobile control panel with 7” color screen and touch function Programmable grinding cycles in 4 variants for the vertical axis Workpiece memory, 10 grinding cycles for quick access Includes the following standard accessories: Full enclosure, open at the top Separate hydraulic system Pgjdpfx Alecm Axuowet Continuously adjustable table longitudinal movement with automatic table reversing Vertical rapid traverse for the grinding head: 300 mm/min (jog speed) Automatic, continuously adjustable vertical feed from 0.001 - 0.025 mm via servo motor Adjustable magnet including clamping force monitoring Automatic central lubrication with visual inspection 1 balancing device for grinding wheels, including balancing arbor 1 grinding wheel flange for grinding wheel bore 127 mm 1 grinding wheel 355 x 38.1 x 127 mm 1 table scraper 1 rear splash guard 1 set of leveling screws for alignment and machine feet 1 operating manual including electrical wiring diagram 1 acceptance test report for machine geometry and grinding spindle according to DIN 8632 Optional: Fine-pole electro-magnetic clamping plate 1000 x 500 mm Coolant tank (max. 135 L) with magnetic separator and paper band filter Manual scraper with hand lever

Condition: good (used), V-belt pulley, pulley -Diameter: 322 mm -Total width: 185 mm -Belts: 8 -V-belt width: 17 mm Pjdpfx Aloct H Tyswegt -Hole: Ø 90 mm -Pulley: balanced -Number: 2x pulleys available -Price: per piece -Weight: 38 kg -other pulleys in stock

Condition: good (used), V-belt pulley, pulley with taper bushing mount, taper tensioning bushing, taper lock tensioning bushing -Diameter: 570 mm -Overall width: 314 mm -Belts: 12 -V-belt width: 22 mm -Taper bushing mount: Ø 95 mm (can be replaced) Pedpect H T Eofx Alwogt -Pulley: balanced -Quantity: 1x pulley available Price: per piece -Weight: 169 kg -other pulleys in stock

Condition: good (used), V-belt pulley, pulley -Diameter: 480 mm -Total width: 240 mm -Belts: 9 -V-belt width: 22 mm -Hole: Ø 124 mm -Pulley: balanced -Weight: 95 kg -other pulleys in stock Podpfxect H T Ie Alwjgt

Condition: good (used), V-belt pulley, pulley Pjdpfsct H T Nox Alwjgt -Diameter: 570 mm -Total width: 237 mm -Belts: 9 -V-belt width: 22 mm -Hole: Ø 90 mm -Pulley: balanced -Weight: 127 kg -other pulleys in stock