Used Baykal Baykal Aphs 31200 for sale (345)

Condition: used, Year of construction: 2017, Maximum printing width: 1,650 mm Maximum web width: 1,700 mm Printing repeat: 430 – 880 mm Maximum mechanical speed: 600 m/min Suitable for solvent-based inks and coatings CFK Air Base mandrel printing cylinder system Stork CFK Air Base anilox sleeve system Gas drying system with Maxon burners Automatic viscosity control system Allstein / Inkspec Automatic ACLEAN ink cleaning system AVISCO viscosity control ARUN automation package Hydrostatic central impression cylinder bearings Unwind * Splice direction: Top or bottom * Reel diameter: 250–1,000 mm * Core sizes: 3 in (76 mm) / 6 in (152 mm) * Design: Shaftless * Material width: 850–1,700 mm (shaftless); minimum 450 mm with winding shaft * Web tension range: 25–300 N * Web tension control: Dancer roller * Reel handling: Lift table * Maximum mechanical speed: 600 m/min * Orientation: Face to face Rewind * Splice direction: Top or bottom * Reel diameter: 250–1,000 mm * Core sizes: 3 in (76 mm) / 6 in (152 mm) * Design: Shafted * Material width: 450–1,700 mm * Web tension range: 25–300 N * Web tension control: Dancer roller * Reel handling: Lift table * Maximum mechanical speed: 600 m/min * Orientation: Face to face Suitable for printing on: • PET • BOPP • OPA • LDPE • HDPE Knodpfezp R Dpjx Anuec • PP films

Condition: good (used), Year of construction: 2011, • Wohlenberg WB 92 TS cutting machine • Approx. 920 mm cutting width • Programmable control • Large stainless-steel work tables • Side tables • Waste/trim removal system • Conveyor system • Baumann material handling equipment • Baumann unloading equipment • Baumann jogging equipment • 4 cutting knives included The waste disposal/conveyor equipment is stated to date from approximately 2017. _____ BAUMANN PERIPHERAL EQUIPMENT The cutting system is complemented by professional Baumann handling equipment. Baumann Unit – Type BA 3N According to the machine plate: • Manufacturer: Heinrich Baumann • Type: BA 3N • Machine No.: 1322 • Voltage: 400 V / 3N~ • Frequency: 50 Hz • Rated current: 9 A • Power: 3 kW • Stated load: 1,000 N • Made in Germany The exact year is not shown on the visible nameplate. Unloading Equipment The owner states that the unloading unit is approximately 10 years older than the main cutting machine. Jogging Table The owner states that the Baumann jogging equipment is approximately 20 years older than the main cutting machine. These age indications are based on information supplied by the machine owner and should therefore be considered approximate. _____ INCLUDED TOOLING A particularly useful part of the package is the knife set: 4 x cutting knives included This reduces the buyer's initial need for additional cutting tools and provides spare knife capacity for ongoing production. _____ WHY BUY THIS CUTTING LINE? Complete Production Package Instead of purchasing only a stand-alone guillotine, the buyer receives a complete cutting and material-handling solution with peripheral equipment. Knsdpjz Ei D Djfx Anusc Proven German Technology Baumann and Wohlenberg equipment is widely used in professional printing and finishing operations and is known for its robust mechanical construction. 920 mm Production Class The 92 cm cutting format is highly versatile and suitable for a wide range of commercial printing, digital printing, bookbinding and finishing applications. Material Handling Included The additional Baumann equipment can significantly improve workflow compared with operating a stand-alone cutting machine. Waste Handling & Conveyors Integrated peripheral systems help reduce manual handling around the cutting process and improve production organization. Four Knives Included _____ SUITABLE APPLICATIONS The system can be used for: • Commercial print finishing • Digital print finishing • Bookbinding • Brochures and catalogues • Sheet cutting • Printed paper • Cardboard and light board applications • Short- and medium-run finishing • General post-press production _____ FGT VALUE – MORE THAN JUST A MACHINE Purchasing used graphic machinery internationally involves more than simply buying equipment. FGT Graphic Machinery can support the complete project from inspection through delivery. Our services can include: • Technical machine evaluation • Inspection coordination • Machine demonstration • Professional dismantling • Preparation for transport • Packing • Loading • International truck transport • Sea freight • Export documentation • Customs preparation • Installation coordination • Technical support _____

Condition: ready for operation (used), functionality: fully functional, Gas inlet: AR Alternatre Gas inlet. Knodpfx Anjxnpw Eousc Good working condition. Please check out our other listings as well.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 12J10E, Used unit of VerderAir VA50 Air-Operated Double Diaphragm (AODD) pumps with stainless steel configurations. The specific arrangement code you provided (VA50 SS SS TF TF) designates a heavy-duty metallic pump constructed with a stainless steel fluid section, stainless steel seats, and PTFE (Teflon) balls and diaphragms. SKU 810.2392, serial number: 12J10E, year of manufacture: 2010, maximum air pressure: 8.5 bar; MFR: 568 L/min; as good as new condition This Air Operated Diaphragm Pump is suitable for the transfer of chemicals, solvents, flammable liquids, and fluids with abrasive particles. Constructed of Stainless Steel and PTFE (Teflon) Energy efficient Easy to install, operate and maintain Anti-ice muffler Free of air lubrication Non-stalling air valve Can run dry without damage Dry self-priming Key Technical Specifications Knowing these parameters can help you accurately list your pump for sale or verify if it meets your facility's operational needs: Maximum Flow Rate: 568 L/min (approx. 150 GPM) Maximum Discharge Pressure: 8.4 bar (approx. 122 PSI) Liquid Connections: 2" BSP/NPT Air Inlet Connection: 1/2" NPT Wetted Materials: Stainless Steel (SS) housing with PTFE (TF) diaphragms/balls, making it highly resistant to aggressive chemicals, solvents, and abrasive media. Maximum Suction Lift: 2.5 m (dry) / 5.5 m (wet) Certification: Standard metallic configurations usually come with ATEX certification for hazardous environments Price: 5.460 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. Wir sprechen Deutsch/Beszélünk magyarul. /Nous parlons français/Vorbim romana Knedpfx Aszz Twconuoc

Condition: used, This listing is for an ÄKTA ready™ Chromatography System The unit is in full working condition and is ready for immediate release The ÄKTA ready™ Chromatography System is a single‑use liquid chromatography platform engineered for bioprocessing, process scale‑up, and GMP‑regulated manufacturing of biologics, including monoclonal antibodies, recombinant proteins, viral vectors, nucleic acids, and other sensitive therapeutic products. Key Characteristics - Single‑use disposable flow paths — eliminate the need for cleaning and cleaning validation between runs, reduce downtime, and minimize cross‑contamination risk. - Flexible operation — available in multiple configurations (isocratic, gradient, variable UV, extended) to match different purification needs. - Scalable platform — flow kits for low and high flow rates support a wide range of process volumes; systems scale from small‑batch purification to larger process requirements when paired with larger ÄKTA ready™ XL models. - Designed for GMP environments — extensive documentation and regulatory support help meet compliance demands in regulated biopharmaceutical production Kodpfxoyhhgas Anuonc

Condition: used, This listing is for the Cytiva Axichrom 140/300 chromatography column The unit is in full working condition and ready for immediate use This high-performance, low-pressure axial compression column is engineered for predictable bioprocess scale-up and efficient purification. It supports automated column packing workflows with modern chromatography resins to ensure reproducible, high-quality bed consistency and separation results. Transparency Report and Technical Audit: Knsdszqf Hnspfx Anuoc Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. For more chromatography columns please click here ?q=chromatography Popular Uses include – purification of drugs, antibodies, proteins and other active ingredients. – purification of proteins, enzymes, antibodies, vaccines and other biologics. – research into proteins, DNA, metabolites, pharmaceuticals and chemical compounds. – separation and purification of chemical substances and intermediates. – analysis of sugars, flavours, additives, contaminants and other components. – testing water, soil and air samples for pollutants and contaminants. – analysis of drugs, metabolites, hormones and other biological compounds. – analysis and separation of hydrocarbons and petroleum products. – analytical and purification services for pharmaceutical and biotechnology companies. – downstream processing and purification of fermentation products

Condition: excellent (used), Year of construction: 2004, Gallus EMS 410, 2004 Unwind unit E L electronic web guide Arcotec Corona Treatment unit 7 servo-driven flexo print stations 7 IST UV dryers 7 servo-driven water-cooled chill rolls Knedpfev E Rizox Anujc rail system delam/relam rotary die station with K&B Gapmaster Matrix rewind Magnetic die crane und hoist BST video control Sensotec automatic register control Exit die with nip Rewind touch screen control panel 21 anilox rollers 9 magnetic cylinders 84 print sleeves Tooling: 12x7 Printing cylinders: 89; 96; 102; 104; 106; 108; 116; 117; 121; 168; 9x Magnetic Cylinders: 89; 96; 102; 104; 108; 112; 116; 117; 120. 1x rubber roller for varnishing. 21x Anilox rollers Good working condition In production, can be inspected at any time

Condition: good (used), Year of construction: 2001, functionality: fully functional, TECHNICAL CONFIGURATION Printing and Drying • 6 flexographic printing units • UV drying system • Hot-air drying system • Combination of UV and water-based ink applications possible, depending on production requirements • Varnishing capability Web Handling • Unwinding unit • Rewinding unit • Automatic web-guiding system • Corona treatment system • Adjustable turn bar system • Turn bar can be positioned flexibly between the individual printing units Converting Equipment • 2 rotary die-cutting stations • 1 die-cutting station equipped with a gap system • Slitting unit • Perforation unit • Inline finishing and converting capability Quality Control • Camera inspection system • Continuous monitoring of print quality and web registration during production Included Accessories The machine is offered together with a selection of production accessories, including: • Magnetic cylinders • Printing cylinders • Anilox rollers Kedpfx Aneztqcmouonc A detailed accessory list can be provided upon request. _____ WHY THIS GALLUS EM 280?  Complete Inline Production Solution The machine combines printing, varnishing, die-cutting, perforating, and slitting in one production line. This allows finished labels to be produced in a single pass and reduces additional handling between production stages.  Flexible Six-Color Configuration The six flexographic printing units provide sufficient color capacity for a wide range of standard and premium label applications. The additional varnishing capability enables protective or decorative surface finishing.  UV and Hot-Air Drying The combination of UV and hot-air drying increases production flexibility and allows the machine to process different ink and coating systems.  Flexible Turn Bar System The adjustable turn bar can be positioned between different printing units. This offers additional flexibility for reverse-side printing, adhesive-side printing, and special multilayer label applications.  Two Rotary Die-Cutting Stations The two rotary die-cutting stations allow more complex converting operations to be carried out inline. One station is equipped with a gap system for improved adjustment and production accuracy.  Integrated Quality Inspection The camera inspection system supports continuous quality control during production and helps minimize waste caused by printing or registration errors.  Proven Gallus Engineering The GALLUS EM 280 is known for its mechanical stability, long service life, and straightforward operation. It remains a reliable production platform for medium-sized label converters, specialist applications, and international export markets. Very Well-Maintained Condition The machine is located in Germany and has been maintained in very good overall condition. Based on the available information, we rate the machine at approximately: Condition: ★★★★★☆☆ 8 out of 10 stars.

Condition: good (used), Year of construction: 2019, Manufacturer: INK SYSTEMS Model: Soft Sonic IS Compact 1300 Hybrid Machine Type: Hybrid Ultrasonic Anilox Roller Cleaning System Year: 2018 Maximum Working Length: approx. 1,300 mm Condition: Good used condition FGT Condition Rating: 8/10 Availability: Subject to prior sale Why this machine is of interest Clean anilox rollers are essential for stable ink transfer, consistent color density, and reproducible flexographic print quality. The IS Compact 1300 Hybrid is designed for professional and efficient cleaning of anilox rollers. Its hybrid cleaning concept offers an attractive solution for label and packaging printers seeking to remove dried ink residues and contamination from engraved anilox cells while reducing manual cleaning effort. For a flexographic printing company, this can directly support: more consistent ink transfer, improved print quality, recovery of effective anilox cell volume, reduced manual cleaning time, longer service life of valuable anilox rollers. Main Technical Data & Configuration Professional anilox roller cleaning system Kjdpfx Aszmhbgjnuonc Hybrid cleaning technology Ultrasonic cleaning principle Suitable for anilox rollers up to approx. 1,300 mm Controlled cleaning process Designed for professional industrial use Suitable for regular maintenance cleaning Compact machine design Closed cleaning concept Year of manufacture: 2018 Suitable Applications Ideal for: Label printing companies Narrow- and mid-web flexographic printers Flexible packaging production Folding carton applications Industrial flexographic printing Regular maintenance of anilox rollers

Condition: used, Year of construction: 2011, Printing Specifications Printing process: Flexographic Number of colors: 8 Maximum material width: 1280 mm Maximum print width: 1200 mm Minimum repeat length: 380 mm Maximum repeat length: 840 mm Maximum machine speed: 300 m/min Equipment Drive system: Fully automatic, gearless Ink pump system: Phonematic with AutoWash Web guiding / Camera system: FIFE Anilox Rollers Quantity: 8 Knedpfxjzk Hw Uj Anuoc Face length: 1260 mm Engraving length: 1240 mm Outside diameter (OD): 171.88 mm Inside diameter (ID): 149.722 mm Printing Sleeves Quantity: 8 Inside diameter (ID): 114.708 mm Face length: 1210 mm

Condition: used, Year of construction: 2013, General technical data: Machine type: Flexographic printing press Web width: 530 mm Number of colors: 10 Equipment & Configuration: • 1-side tape cleaner • 1-side corona treatment Knodpfx Aoyplyaonusc • Turning bar • Delam/Relam unit – 1 color • Cold foil unit – 1 • Die-cut station – 1 • Master gap unit – 1 • Rewind shaft – 1 • 10 UV GEW lamps • 3 sets of sleeves • 10 anilox rollers • 3 magnetic cylinders

Condition: used, Year of construction: 2001, 8 colors Printing width (endless sleeves) Max.: 1270 mm Printing width (non-endless sleeves) Max.: 1250 mm Maximum mechanical machine speed: 460 m/min Gear pitch: 10 mm Printing length / repeat: 300–1200 mm Material width: max. 1320 mm Materials Suitable for processing: LDPE, PP, PA: 20–150 µm HDPE, OPP: 12–100 µm Laminated films: max. 120 µm Paper: 30–120 g/m² Unwind / Rewind Maximum roll diameter, unwind: 1000 mm Maximum roll diameter, rewind: 1000 mm Core inside diameter: 76 mm Core outside diameter: 85 mm Maximum roll weight: 1240 kg Drying system Knodszvfgfspfx Anusc Printing unit supply air: max. approx. 5,250 m³/h Printing unit fresh air: approx. 2,620 m³/h Bridge supply air: max. approx. 8,430 m³/h Bridge fresh air: approx. 2,150 m³/h Recirculated air: approx. 5,600 m³/h Supply air temperature, printing unit: max. 100 °C Supply air temperature, bridge: max. 120 °C Equipment / Features W&H Turboclean ink supply system Unwind and rewind units Drying system Corona treatment Operator control system Printing cylinders and accessories Anilox rollers Portalift system

Condition: good (used), Year of construction: 2011, functionality: fully functional, Manufacturer: OMET S.r.l., Italy Model: MP Advanced Machine Type: Flexographic Plate Mounter Year: 2011 Serial No.: 1487 MPA Working Width: approx. 430 mm Condition: Good used condition FGT Condition Rating: ★★★★★☆☆ 8/10 Availability: Immediately available Why this machine is interesting The OMET MP Advanced is designed for accurate and repeatable mounting of flexographic printing plates. Its dual-camera positioning system supports precise register preparation and can significantly reduce press setup time, start-up waste, and register corrections. This is a particularly attractive solution for narrow-web label and packaging printers looking to improve efficiency through offline plate preparation. Main Configuration • Dual-camera positioning system • Two independently adjustable camera units • Central operator monitor • Digital position displays • Precision linear camera movement • Plate cylinder mounting section • Mechanical cylinder support system • Adjustable positioning components • Robust industrial machine frame • CE marked Suitable Applications Ideal for: • Self-adhesive labels • Paper and film labels • Flexible packaging Knedpfx Anezkawueuec • Multi-color flexographic printing • Narrow-web converting applications Main Benefits • Accurate plate positioning • Improved register repeatability • Faster job preparation • Reduced press downtime • Lower start-up waste • Offline cylinder preparation • Reduced operator-dependent mounting errors Scope of Supply • OMET MP Advanced plate mounter • Dual-camera system • Central monitor • Digital positioning displays • Cylinder mounting and support section • Standard equipment as installed Additional adapters, sleeves, cylinders, or tooling are subject to separate confirmation.

Condition: used, Year of construction: 2016, General technical data: Machine type: Flexographic printing press Web width: 430 mm Number of colors: 6 Equipment & Configuration: • 1-side tape cleaner • 1-side corona treatment • 3 die-cut stations • 2 gap master units • Delivery: reel or sheet with folding table • 6 UV IVT lamps • Turning bar • Delam/Relam unit – 1 color Knsdpfxoyn Sb Us Anusc • 3 sets of sleeves • 6 anilox rollers • 3 magnetic cylinders

Condition: used, Year of construction: 2008, Technical data: Printing Section Knsdpoxlrd Nefx Anuec - 5 × UV Flexo Printing Units - 5 × UV Dryers - Web Inspection: BST PowerScope 300 – Web Inspection System Unwinder - Max roll diameter: 1250 mm - Heavy-duty construction with pneumatic shaft and web tension control - Integrated splice table and web guiding system Rewinder - Max roll diameter: 1250 mm (≈ 40 inch) Cold Foil / Lamination Module - Enables in-line application of cold foil or over-lamination for premium label finishes (metallic, protective film, etc.) Turnbar (Web Inversion Unit) - Allows reverse-side printing or lamination — flexible for multi-layer label applications Remailing Section - 24” - Supports reprocessing or secondary processing of pre-printed materials Additional Modules - Ben Bunch 500 - Die-cutting unit EM 510 (for use with magnetic cylinder, adjustable for gap) - Cross Cutting Cylinder (inline sheeting or perforation — precise longitudinal or transverse cutting) - Punching Units (adjustable punching length from 12” to 26”, ideal for perforations, registration holes, or special die-cut shapes in-line)

Condition: ready for operation (used), Year of construction: 2002, Flexoprinting machine CI type Bonardi Mira 1200 6 col. System: Sleeved Printing Width: 1200 mm Web Width: 1250 mm Ksdpfx Asxuwanonusnc Printing Repeat (Max): 800 mm Printing Repeat (Min): 350 mm Plate-Cylinder Gear-Pitch Module: 5 mm Plate-Thickness, Sticky Back Included: 1,64 mm Drying System: Electrical Sleeve changeover central impression press Helical gears, pitch 5 mm Side register capability /- 10 mm Up-down register capability /- 7 mm Mechanical speed 250 m/min Web tension range 30-250 N Flexo inks solvent based and water No 6 pneumatic pumps Printing plate thickness 1,14 mm Sticky back adhesive thickness 0,50 mm Chill roller with OD 290 mm Double unwinder with automatic control tensión Electromagnetic powder brakes Pneumatic loaded dancer with two low inertia air cylinders Two air expandable shafts Reel max diam 700 mm Core diam. 3” Doble rewinder Two motors CA Pneumatic loaded dancer with two low inertia air cylinders Micro switch to stop the press in case the web breaks or reel end Marriage roll pneumatic operated to enable to splice to be carried out at reducer speed with operator intervention PRINTING MANDRELS Nr. 02 sets of Nr. 06 mandrels ANILOX ROLLERS A total package of 10 ceramic coated and laser engraved aniloxes 260,100, 140 l/cm SLEEVE AND REPEAT GEARS Repeat 5 set of printing sleeves 350, 400, 450, 550, 600 BANANA ROLLER 1 Banana at the infeed (before nip on top of the central drum). 1 Banana at the infeed (before rewinder )

Condition: used, This listing is for the GE Healthcare (now Cytiva) GE Axicrom 50/300 Chromatography column The unit is in full working condition and is ready for immediate use Kodpfjxhdxdsx Anuenc The AxiChrom line is a series of chromatography columns by GE Healthcare (now Cytiva), designed for preparative / process chromatography scale. The “50/300” refers to the diameter and tube length / “bed height” configuration. Key details: 50/300: This is the smallest of the larger-scale columns. The “50” refers to the internal diameter (ID) of the column tube (50 mm), and “300” refers to the bed height (300 mm) for the “short” version. There is also a “50/500” for longer bed heights (500 mm). It uses axial compression, meaning the packing medium is compressed hydraulically from the top adapter, which helps ensure uniform packing density. The materials are designed to meet regulatory standards (USP Class VI, etc.

Year of construction: 1991, condition: used, functionality: fully functional, machine/vehicle number: L7-614-14H, PRODUCTION LINE FOR THE PRODUCTION OF 330 X 330 MM ¼ FOLD NAPKINS. PRICE: PRINTING MACHINE Producer: Hobema Model: 14H Serial number: L7-614-14H Production date: 1991 EQUIPMENT 1. Double unwinder for reels up to: 1500 mm with lift • intake for roll core R 70 or 76 mm • max roll weight 200 kg • single motor drive with multi-V-belt • drive speed controlled by dancer Knsdpfjwnyatox Anuec • automatic machine stop at reel end • dust removal system 2. Calendering Unit • for equalizing the tissue thickness, reducing of dust, and improving the printing quality • drive from the central engine • hardened and ground cylinders 3. Web Aligner No. AND • FIFO web aligner positioned in front of printing station 4. Flexographic Printing Press • one printing tower frame for max five (5) printing units • moveable operating platform for operating the printing units • push-button operator panel • maximum format range 330 mm 2 • one central engine for all printers • motorized 360° radial register • ceramic coated anilox roller • one set mounting cylinders – for 330mm (Lunch) napkins formats • external air pumps to supply paint • lifting and dropping of ink trays • protection covers, safety switches 5. Strobe device for print control. 6. Infrared Drying Equipment • one drying infra-red cassette with temperature regulation • one fan for cooling the casette • automatic shut-off when the end of the material roll. 7. FIFO web Aligner No. II for embossing 8. Double embossing station • two-position embossing station • two sets rollers for embosiing – Formats: Lunch 330x330mm, round 330x330mm 9. Vertical folding frame with a cutting knife 10. ¼ Folding Head 11. Two-way product output and automatic transfer to packing machine 12. Electrical Equipment TECHNICAL DATA Max printing speed: 300m/min Real speed printing: 230 – 250 m/min Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Control – Siemens S5 Max Power 120 KW. ELECTRICAL DATA Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Max power 30 KW.

Condition: used, This listing is for GE Axichrom Master 300-1000 Control Tower + GE AxiChrom 300/300 mm Chromatography Column. The unit is in full working condition and ready for immediate use. Kjdpfxoxxycao Anujnc Automated biopharmaceutical column packing system optimizing resin performance for purification

Condition: ready for operation (used), A 4-color central cylinder printing system WDB Systemtechnik is available. Printing units: 4, ink type: UV, max. material width: 650mm, max. printing width: 600mm, printing length range: 300mm–800mm, max. printing speed: 250m/min, material types: PET/OPP/aluminum/laminate/composite materials, material thickness range: 20µm–150µm, max. unwind and rewind roll diameter: 1000mm, operating hours: 28h, printed length: approx. 57000m. System components: unwind and rewind unit, corona, UV dryer, drying channel, IR heater, cooling unit, and supply and exhaust air fan. Including lamination unit. Documentation available. An on-site inspection is possible. Knedsxmkctepfx Anusc

Year of construction: 2008, condition: good (used), ROTOFLEX VLI 330 Inspection – Slitting – Rewinding Machine Manufacturer: ROTOFLEX International Model: VLI 330 Year: 2008 Serial No.: VLI 3517 Working width class: 330 mm Electrical: 380 V / 50 Hz / 3 Phase Condition: Very good working condition Current status: Still in production Availability: Approx. 3 months, after installation of the owner's new finishing line BRAND-NEW INSPECTION TECHNOLOGY BST TubeScan – Installed / Replaced in 2025 The machine is equipped with a modern: BST TubeScan Digital Strobe 4000 Inspection System The complete camera / inspection system was replaced in 2025 and is therefore almost new. This represents a considerable added value compared to many older Rotoflex machines currently available on the used machinery market. The system allows the operator to monitor the printed web during production and supports reliable quality control of finished labels. MACHINE APPLICATION The Rotoflex VLI 330 is designed for professional finishing and inspection of label material. Knedjzww Ikjpfx Anusc Typical applications include: · Inspection of printed labels · Slitting of master rolls into finished rolls · Rewinding · Removal and correction of defective material · Quality control · Preparation of finished rolls for delivery · Processing of pressure-sensitive label materials · Paper and film label applications

Condition: used, This listing is for 1 of 2 QuattroFlow QF15PTIU Single-use Pump Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The QuattroFlow QF 150 PTIU is an advanced single-use quaternary diaphragm pump tailored for biopharmaceutical applications, offering several notable features and benefits that enhance its functionality in sensitive environments. Here’s a detailed look at its specifications and advantages: Key Features and Specifications: Flow Rate: Operates within a range of 0.02 to 3.2 lpm (0.01 to 0.85 gph), making it highly adaptable for various bioprocessing tasks. Design: Utilizes a 4-piston diaphragm positive displacement system, which ensures total product containment. This design minimizes the risk of abrasion and particle shedding, crucial for maintaining product purity. Materials: Constructed from disposable machined polypropylene, the pump is designed specifically for single-use applications, significantly reducing contamination risks. Control System: Equipped with an integrated controller, allowing for automated operation and precise control over pump functions, which enhances efficiency and consistency in processes. Certifications: Complies with USP Class VI and 3.1B standards, as well as CFR FDA regulations, ensuring it meets the stringent requirements for biopharmaceutical manufacturing. Applications: The QF 150 PTIU is versatile and suitable for various critical applications, such as: Filtration Systems: Ideal for use in Tangential Flow Filtration (TFF) setups, where it can efficiently process biological solutions. Chromatography Systems: Effectively manages the flow of reagents and samples during separation processes. Feeding Pumps: Provides reliable and consistent dosing in various bioprocessing applications. Virus Filtration: Plays a pivotal role in ensuring the safety of biopharmaceutical products by filtering out contaminants. Sterile Filtration: Maintains sterility in critical processing steps, essential for product integrity. Key Benefits: Total Product Containment: Ensures that no product is lost or contaminated during transfer, vital for high-value biopharmaceuticals. Low Pulsation and Low Shear Operation: These features preserve delicate biological materials and maintain their integrity throughout the pumping process. Variable Flow Rate: Allows for flexibility in operations, accommodating different process needs easily. Kjdpfxsxxz Iwo Anuenc Quiet Operation: Minimizes noise during operation, making it suitable for laboratory and clinical environments. CIP/SIP Capable: Facilitates easy cleaning and sterilization, ensuring high hygiene standards are maintained. Autoclavable: Supports sterilization processes, enhancing its usability in critical applications. Single-Use Design: Reduces maintenance requirements and downtime, allowing for efficient workflow in biopharmaceutical settings.

Condition: good (used), Year of construction: 2006, The machine is equipped with a highly flexible combination of different printing technologies: 8 printing units • 5 x offset printing units • 3 x rotary screen printing units • 2 x flexographic printing/coating units This combination makes the machine particularly suitable for sophisticated label production that requires several printing and finishing processes in a single production line. Included are, among other things: • Numerous printing cylinders • Magnetic cylinders • Extensive anilox rollers • Printing and converting accessories • Screen printing equipment • Additional machine-specific tooling A detailed tooling list can be provided upon request, subject to final inventory. _____ COMPLETE MACHINE CONFIGURATION Knjdpfxozww N Ue Anuoc Printing at all 8 printing units • 5 x offset printing units • 3 x rotary screen printing units • 2 x flexographic printing/coating units Web Handling • Martin Automatic unwinder • Rewinder • Web guiding / web edge control • Corona treatment Drying • UV drying system Inspection • Camera / web inspection system Finishing & Converting • Flexo varnishing station • Rotary hot foil • Cold foil • Rinio embossing unit • Lamination system • Kocher & Beck rotary die-cutting Tooling • Printing cylinders • Magnetic cylinders • Anilox rollers • Screen printing accessories • Additional tooling and machine-specific accessories _____

Condition: refurbished (used), functionality: fully functional, Heavy duty ball valve pump Bottom ported Capacity: max. 988 LPM Solids handling: max. 22 mm Discharge pressure: max. 8.6 bar Displacement per stroke: 6.81 liter Connection style: 3" 125# ANSI Pipe size: 80 mm Knsdpfx Ansx Tqaheujc

Condition: good (used), Year of construction: 1997, functionality: fully functional, Technical Offer – Gallus EM 410 S Manufacturer: Gallus Ferd. Rüesch AG / Arsoma Druckmaschinen GmbH Model: Gallus EM 410 S Year: 1997 Incoterm: FCA Kedpfxjznwhre Anuonc FGT Condition Rating: ★★★★★☆☆ (8/10) _____ Why this machine is interesting The Gallus EM 410 S is one of the most successful servo-driven UV flexographic presses ever built for the narrow web label industry. Thanks to its modular design, high production speed, and comprehensive inline converting equipment, it is perfectly suited for self-adhesive labels, flexible packaging, filmic materials, and premium label applications. Delivered complete with printing cylinders, anilox rolls, and magnetic cylinders, the machine offers an excellent opportunity to start production immediately while significantly reducing tooling investment. _____ Technical Specification • 8 UV Flexographic Printing Units • Web Width: 410 mm • Maximum Printing Width: 410 mm • Mechanical Speed: Up to 150 m/min • Print Repeat: Approx. 254–648 mm (depending on cylinders) • UV Flexo Printing (Front & Reverse) • Servo-Driven Technology • Electrical Supply: 400 V / 50–60 Hz / 3 Phase / 80 A Web Handling • Unwinder for rolls up to 800–1,000 mm • Maximum Unwind Diameter: 1,000–1,250 mm • Double Rewinder • Maximum Rewind Diameter: 800–1,250 mm • Automatic Electronic Web Guide (E&L or equivalent) Drying & Finishing • IST Metz UV Drying System • Corona Treatment • Teknek Web Cleaning System • Turnbar System • 2 Rotary Die-Cutting Stations with GapMaster • Inline Laminating Unit Quality Control • SES SensoTec Register Control System • Register Accuracy: ±0.1 mm • OkiSystem Sentinel Defect Detection System Printable Materials • Paper • PE Films • PP Films • PET Films • Self-Adhesive Materials • Lightweight Carton _____ Included Equipment • Complete set of Printing Cylinders • Complete set of Anilox Rolls • Magnetic Cylinders • Automatic Web Guide • Turnbar • Corona Treater • Teknek Web Cleaner • 2 × Rotary Die-Cutting Stations with GapMaster • Inline Laminating • IST Metz Multi-Lamp UV System • Double Rewinder • Register Control • Defect Detection System _____ Main Advantages • Proven Gallus servo-driven technology • High production speed up to 150 m/min • Complete inline converting configuration • Extensive tooling package included • Modular platform compatible with Gallus EM 260 / EM 410 / EM 510 • Ready for immediate production with minimal additional investment _____ The machine can be inspected while running. Should you require further information, additional photographs, or wish to arrange an inspection, please do not hesitate to contact us. We look forward to hearing from you.