Used Bds Maschinen Skf-Auto for sale (10,001)

Condition: good (used), -KOM 3005- We offer here a used bar feeder for lathes. Fpodpsurldcefx Ag Aoh Technical data Machine dimensions: (w x d x h) approx. 3850 x 700 x 1300 mm Power connection / control voltage: 220 Volt / 50 Hz Machine no.: 90042033 Remarks: The machine is under power in our warehouse and is ready for demonstration

Condition: like new (used), Year of construction: 2021, Machine bought new in 2022 and hardly used. It literally still looks brand new. Rare opportunity. Fpodpfxjv Hfg Rs Ag Ajh

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Fpsdpfjyrhppox Ag Ajh Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual

Condition: reconditioned (used), functionality: fully functional, working width: 385 mm, area performance: 1,100 m²/h, overall weight: 40 kg, warranty duration: 12 months, water tank capacity: 12 l, KARCHER BD 40/12 C Bp Pack SCRUBBERS NEW SONNENSCHEIN GF 12 025V GEL BATTERIES (2x) Fodpfx Aewcqzdog Ajph NEW SPE 24V 4.5A INTERNAL RECTIFIER 385mm cleaning head equipped with a new medium-hardness disc brush, allowing work on any surface. Polyurethane squeegee rubbers, resistant to contact with oil liquids, grease and petroleum derivatives Built-in battery charger facilitates daily operation The device is equipped with a new durable suction hose The new suction turbine ensures high water suction power from the squeegee Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Working width (mm): 385 Squeegee width (mm): 450 Theoretical efficiency (m²/h): 1,100 Number of brushes (pcs.): 1 Brush rotation speed (rpm) 150 Clean water tank capacity (l): 12 Dirty water tank capacity (l): 12 Weight with equipment (kg): 40 INCLUDED: NEW BATTERIES GEL SONNENSCHEIN GF 12 025V (2x) NEW INTERNAL RECTIFIER SPE 24V 4.5A NEW disc brush 385mm PPL 0.5 NEW suction turbine NEW suction hose NEW drain hose Suction strip with oil-resistant rubbers Tenzi Normal liquid 5 liters - FREE KEY FEATURES: A 12-liter tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Thanks to its design, the machine is very maneuverable. A small turning radius allows you to work even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface A large working width (385mm) ensures high surface efficiency A very legible and intuitive control panel.

Condition: used, first registration: 02/1990, Year of construction: 1990, SPIERINGS Lattice Mast Tower/Truck Crane Chassis: • Engine power: 222 kW / 305 HP / displacement 8,250 cm³ • Vehicle dimensions: 12,395 x 2,600 x 4,000 mm • Operating weight: 35,000 kg • Permissible gross weight: 36,000 kg incl. 7,080 kg counterweight • Tires: 445/65 R22.5 • 3 axles • 1st and 3rd axles are steered • Beacon lights Crane: • Max. outreach: 30.4 m • Max. lifting capacity: 5,000 kg at 9.3 m outreach • Drive system: hydraulic, hydro pumps electrically powered by external power source or generator operation • Control system: electrically operated proportional and control valves • Max. corner load: 204 kN • Max. speed: 85 km/h • Can only be moved from the carrier vehicle! Hoisting Gear: • Motor: hydraulic variable displacement motor • Drive group: 1Am • Displacement: 20..55 cm³ • Max. supply pressure: 260 bar • Transmission: planetary gear, i=27 • Drum diameter: 375 mm • Max. rope pull: 25 kN • Corresponding rope speed: 30 m/min • Holding brake: spring-loaded multi-disc brake Trolley: • Motor: hydraulic fixed displacement motor Fedpfx Agjwmpczs Asph • Drive group: 1Am • Displacement: 16 cm³ • Max. supply pressure: 265 bar • Transmission: planetary gear, i=10.4 • Drum diameter: 200 mm • Max. rope pull: 6 kN • Max. speed: 50 m/min • With limit switch • Holding brake: spring-loaded multi-disc brake Slew Gear: • Motor: hydraulic fixed displacement motor • Displacement: 16 cm³ • Max. supply pressure: 300 bar • Transmission: planetary gear, i=160 • Max. superstructure slewing speed: 1.3 rpm • Slewing brake: hydraulic brake valve • Holding brake: spring-loaded multi-disc brake Luffing Winch: • Drive group: 1Em • Motor: hydraulic fixed displacement motor • Displacement: 16 cm³ • Max. supply pressure: 220 bar • Transmission: planetary gear, i=92 • Drum diameter: 200 mm • Max. rope pull: 38 kN • Max. speed: 18 m/min • Holding brake: spring-loaded multi-disc brake • With limit switch Load / Load Moment Limiter: • Pressure switch on hoisting drive motor • Mechanical switch triggered by turret frame bending Tower: • Working height: 20.8 m • Outer tower: length 9.9 m; Inner tower: 11 m Jib: • Trolley jib in lattice construction; can be positioned either horizontally or at 30° incline • 1st jib section: length 11 m / 2nd section: 11.1 m / 3rd section: 7.8 m - German machine! - Ready for operation! Errors and prior sale excepted! = Further information = Main boom length: 30.4 m

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 76 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, power: 27 kW (36.71 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Inverter, operating speed: 38 mm/s, pressure: 150 bar, wall thickness: 4 mm, working length: 3,000 mm, Equipment: documentation/manual, 76x4mm Semi Automatic NC Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are NB, NBR, NBRF. NB series makes bending operation automatically. NBR series makes bending and rotating operation automatically. NBRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for NBR and NBRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 7-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Fpedpfxsvwg D Ss Ag Aeh Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 32 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Inverter, operating speed: 99 mm/s, pressure: 130 bar, wall thickness: 2 mm, working length: 1,920 mm, Equipment: documentation/manual, 32x2mm Semi Automatic NC Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are B, BR, BRF. B series makes bending operation automatically. BR series makes bending and rotating operation automatically. BRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for BR and BRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 7-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems. Fpsdpfxevx D D Ss Ag Ajh

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 32 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, power: 8.2 kW (11.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, operating speed: 99 mm/s, pressure: 150 bar, wall thickness: 2 mm, working length: 2,500 mm, Equipment: documentation/manual, 32x2mm Fully Automatic Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are NB, NBR, NBRF. NB series makes bending operation automatically. NBR series makes bending and rotating operation automatically. Fsdpevwg Hmofx Ag Aeph NBRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for NBR and NBRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 10-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: used, axle configuration: 2 axles, loading space length: 13,800 mm, loading space width: 2,550 mm, loading space height: 780 mm, total length: 13,800 mm, total width: 2,550 mm, suspension: air, tire size: 205/65R17.5, color: grey, Equipment: ABS, = Further Options and Accessories = - Toolbox = Notes = New trailer, available for immediate delivery. Not yet registered. Fitted with: ROR axles with drum brakes. Air suspension with lifting and lowering valve. 4 x LED work lights. 2 x LED flash lights on rear frame. 4 sockets for width markers. Edge profile with 30 mm holes every 1000 mm. 2 x 10 units stake pockets in the side beam. Mounting bracket for winch. Rear storage compartment for ramps, Maximum ramp dimensions: 2400 x 470 x 150 mm Stainless steel toolbox 1000 x 350 x 500 mm. Fpodpewbzi Nsfx Ag Aoh Hardwood floor. = Further Information = Tire size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Tire tread left inner: 100%; Tire tread left outer: 100%; Tire tread right inner: 100%; Tire tread right outer: 100% Rear axle 2: Twin tires; Tire tread left inner: 100%; Tire tread left outer: 100%; Tire tread right inner: 100%; Tire tread right outer: 100% Unladen weight: 6,600 kg Payload: 20,600 kg Gross vehicle weight: 27,200 kg Type number: LOW LOADER / AUTO-CARAVAN TRANSPORTER = Company Information = ALL PRICES ARE NET EXPORT PRICES, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) We also speak Russian. We strive to provide accurate information but no rights can be derived from the published texts.

Condition: reconditioned (used), functionality: fully functional, working width: 400 mm, area performance: 1,600 m²/h, warranty duration: 12 months, water tank capacity: 25 l, KARCHER BD 40/25 C Bp Pack Scrubber Fpjdsywxhbepfx Ag Aeh NEW 12V 85Ah SIAP GEL BATTERIES (2x) NEW NEOS 24V 10A CHARGER 400mm cleaning head equipped with a new medium-hard disc brush, enabling work on any surface. New natural rubber squeegees The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you get exactly what you see. TECHNICAL DATA: Working width (mm): 400 Suction width (mm): 770 Power supply: battery Clean/dirty water tank (l): 25/25 Theoretical capacity (m²/h): 1600 Weight (kg): 55 Dimensions (L x W x H) (mm): 800 x 575 x 830 INCLUDED: NEW 12V GEL BATTERIES 85Ah SIAP (2x) NEW NEOS 24V 10A BATTERY CHARGER NEW 24V 500W suction turbine NEW 400mm PPL0.5 disc brush NEW suction hose NEW drain hose Squeegee blade with new rubbers Built-in battery charger 5 liter Tenzi Normal solution - FREE KEY FEATURES: The 25 liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The squeegee bar ensures precise solution extraction from the cleaned surface. The large working width (400mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: used, mileage: 25,229 km, power: 324 kW (440.52 HP), first registration: 10/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,400 mm, loading space length: 8,100 mm, loading space width: 2,500 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN 26.440 TGX 6x2-4 LL | Construction Machinery & Aerial Work Platform Transporter ----Vehicle Data * MAN TGX 26.440, 6x2-4 LL * 324 kW (441 hp) * Euro 6e (green emissions sticker) * Diesel, automatic transmission * Permissible total weight: 26,000 kg * Mileage: 25,229 km * Colour: White * Combustion engine ----Truck Equipment * Long-distance driver’s cab * Auxiliary heating * Safety package * Driver comfort package * Storage package * Trailer package * Steerable tag axle * LED rear lights * Sun visor * Rotating beacons * Reversing camera * Multifunction steering wheel * 1 sleeper bunk * Refrigerator * Media system with navigation * Automatic climate control ----Superstructure * Low-profile construction from laser-cut and precision-bent special profiles * Body length approx. 8,100 mm * Frame height unladen approx. 1,050 mm * Frame width approx. 2,550 mm * 2 extension ramps (each with 1 fixed and 1 extendable section) * Ramps laterally adjustable * Ramp surface made of grating * Mechanical ramp locking * Holders on exterior frame for ramps when not in use * Electro-hydraulic ramp operation * Emergency control at control valve block * Manual pump in case of system failure Fpsdpfjyn Tv Tjx Ag Aeh * Hydraulic rear supports * Radio remote control for all hydraulic functions * Grating floor with increased load capacity * Rear end with inclined ramp * Bulkhead approx. 2,000 mm high, angled inwards * Stainless steel toolbox inside in front of bulkhead * 2 stainless steel toolboxes on the side of the frame (left/right) * 1 stainless steel toolbox at rear right (hydraulic unit/control block) * Work lights: * 1 pair on back of cab * 2 pairs on frame sides * 2 pairs on the rear * 2 access steps for loading area walk-on access ----Load Securing * Longitudinal beams with Multi-X contour and 2.5 t lashing points * 6 pairs of 6-ton lashing points in the longitudinal beams * Perforated outer frame with 2.5 t lashing points * 6 pairs of 6-ton lashing points on the outer frame * 4 x 6-ton lashing points at rear * 4 x 6-ton lashing points below in front of the bulkhead toolbox ----Paintwork * Body KTL powder-coated in RAL 9005 black * Bulkhead painted RAL 9005 black * Ramps and grating galvanized ----Markings * Reflective tape on sides and rear according to EU regulations For further information, we are happy to assist you.

Condition: used, mileage: 25,229 km, power: 324 kW (440.52 HP), fuel type: diesel, gearing type: automatic, axle configuration: 3 axles, overall weight: 26,000 kg, first registration: 10/2024, loading space length: 8,100 mm, color: white, total width: 2,550 mm, total height: 3,400 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN 26.440 TGX 6x2-4 LL – Construction Machinery & Access Platform Transporter ---- Vehicle Data * MAN TGX 26.440, 6x2-4 LL Fjdpfx Agjyn Tvtj Ajph * 324 kW (441 hp) * Euro 6e (green emissions sticker) * Diesel, automatic transmission * Permissible total weight: 26,000 kg * Mileage: 25,229 km * Color: White * Internal combustion engine ---- Truck Equipment * Long-distance driver’s cab * Auxiliary heater * Safety package * Driver comfort package * Storage package * Trailer package * Steered trailing axle * LED tail lights * Sun visor * Warning beacons * Reversing camera * Multifunction steering wheel * 1 sleeping bunk * Refrigerator * Media system with navigation * Automatic climate control ---- Body * Low-profile construction with laser-cut, precision-bent special profiles * Body length approx. 8,100 mm * Frame height (unladen) approx. 1,050 mm * Frame width approx. 2,550 mm * 2 extension ramps (each: 1 fixed section + 1 extending section) * Ramps laterally movable * Ramp surface made of grating * Mechanical ramp locking * Holder on the outer frame for unused ramps * Electro-hydraulic ramp drive * Emergency manual control on control block * Hand pump in case of total failure * Hydraulic rear supports * Wireless remote control for all hydraulic functions * Grating floor with increased load capacity * Tapered rear end * Bulkhead approx. 2,000 mm high, inward bent * Stainless steel toolbox inside in front of the bulkhead * 2 stainless steel toolboxes on the side of the frame (left/right) * 1 stainless steel toolbox at the rear right (hydraulic unit/control block) * Work lights: * 1 pair on the back of the cab * 2 pairs on the sides of the frame * 2 pairs at the rear * 2 steps for access to the loading area ---- Load Securing * Longitudinal beams with Multi-X profile and 2.5 t lashing points * 6 pairs of 6 t lashing points in the longitudinal beams * Perforated outer frame with 2.5 t lashing points * 6 pairs of 6 t lashing points in the outer frame * 4 pcs. 6 t lashing points at the rear * 4 pcs. 6 t lashing points below, in front of the bulkhead toolbox ---- Paintwork * Structure KTL powder-coated in RAL 9005 black * Bulkhead painted in RAL 9005 black * Ramps and grating galvanized ---- Marking * Reflective tape on sides and rear to comply with EU regulations Please feel free to contact us for further information.

Condition: used, mileage: 25,229 km, power: 324 kW (440.52 HP), first registration: 10/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,400 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN 26.440 TGX 6x2-4 LL | Construction Equipment & Access Platform Transporter ---- Vehicle Data * MAN TGX 26.440, 6x2-4 LL * 324 kW (441 HP) * Euro 6e (green emissions sticker) * Diesel, automatic transmission * Gross vehicle weight: 26,000 kg * Mileage: 25,229 km * Color: White * Internal combustion engine ---- Truck Equipment * Long-distance driver’s cab * Auxiliary heating * Safety package * Driver comfort package * Storage package * Trailer package * Steerable trailing axle * LED rear lights * Sun visor * Warning beacons * Reversing camera * Multifunction steering wheel Fsdpfx Asyn Tu Neg Ajph * 1 sleeping bunk * Refrigerator * Media system with navigation * Automatic climate control ---- Body Specifications * Low-profile construction using laser-cut, folded special profiles * Body length approx. 8,100 mm * Frame height unladen: approx. 1,050 mm * Frame width: approx. 2,550 mm * 2 telescopic ramps (each with 1 fixed part + 1 extendable section) * Ramps laterally adjustable * Ramp surface made of grating * Mechanical ramp locking * Ramp holders on the outer frame when not in use * Electro-hydraulic ramp drive * Emergency manual control on the control block * Hand pump in case of complete hydraulic failure * Hydraulic rear supports * Radio remote control for all hydraulic functions * Grating floor with increased load capacity * Rear with chamfered edge * Front wall approx. 2,000 mm high, inwardly folded * Stainless steel storage box inside, in front of the front wall * 2 stainless steel toolboxes mounted on the frame (left/right) * 1 stainless steel toolbox rear right (for hydraulic unit/control block) * Work lights: * 1 pair mounted at rear of cab * 2 pairs mounted on sides of frame * 2 pairs mounted at rear * 2 access ladders for cargo area inspection ---- Load Securing * Longitudinal beams with Multi-X contour and lashing points, 2.5 t * 6 pairs of 6 t lashing points in the longitudinal beams * Perforated outer frame with lashing points, 2.5 t * 6 pairs of 6 t lashing points on the outer frame * 4 pieces of 6 t lashing points at the rear * 4 pieces of 6 t lashing points below, in front of the front wall box ---- Paintwork * Body KTL powder-coated in RAL 9005 black * Front wall painted RAL 9005 black * Ramps and grating galvanized ---- Decals * Reflective film on sides and rear in accordance with EU regulations For further information, please feel free to contact us.

Condition: good (used), Freemantle S05 automatic loading sleever. Excellent condition. Fpodpfx Agevvn A Hj Ajh

Condition: good (used), Year of construction: 2010, Ref: 10940 . 2010 CMC Q-Cover One Semi Auto casemaker that turns-in one side at a time and folds the corners automatically. The cover is then passed into the nip-roller, output on collector table. Equipped with: Huge variety of materials for high-quality cases and covers Lining operations on the same unit Stainless hot & cold gluing unit Automatic viscosity circuit and fast flushing system Case gauge for spine and pages Innovative corner tucking devices Vacuum-suction feeding belts for faster operation Easy-operation touchscreen Adjustable case-collection hopper Accessories: Large size kit for box production etc Specification: Min size: 15mm x 15mm Max. size turned edge: 46 x 78mm Fpedpfxov Uqpmo Ag Ash Max. size edge-to-edge: 50 x 80mm Minimum Height of Case 105 mm Maximum Open Flat Case 760 x 460 mm Paper thickness 100g/m2 – 170g/m2 Board thickness: 1.5mm - 3mm

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Fsdpfetp H Erox Ag Aoph Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Drum Crusher AUTO is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Fpedpfx Aoc Spgusg Ajh AUTO compaction cycles Compaction head with spikes to punch the drum to drain out any residual liquids Maximum safety standards by totally enclosed chamber 30 Ltr. collection tray with tap connection Useable for 30 to 220 Ltr. steel drums, plastic drums and cardboard drums A quality product “Made in Europe” Suitable for compacting Steel drums Plastic drums Cardboard drums Fiber and paper drums Optional extras Machine colour RAL Can and filter crush insert Multi head to compact inside a 200 Ltr steel drum Drum Crusher, Drum Press, Drum Compactor, Barrel Crusher, Barrel Press, Barrel Compactor

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Watkiss Auto SpineMaster’ book spine press. Fodpfjym Nlnjx Ag Ajph Item for sale: 1 x Watkiss Auto SpineMaster Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functionality test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: like new (used), 12fill VMP semi auto filling machine semi auto filling machine with volumetric dosing system, ideal for pastes, creams, sauces and pates, 100ml to 1000ml, up to 25 fills per min, mobile frame with foot pedal Fpsdjhpqvyopfx Ag Aoh

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: hydraulics, Car carpet washing machine Condition New Fedpfx Agev A T Tqe Asph Brand NMTEH Type Compact water 2 L/min Manufacturer Warranty 1 Year Voltage 220 Model NMTEH Country/Region of Manufacture - Latvia Cord Type Corded Power: 2,5kW Item Weight ~200kg Auto carpet washing machine The difference from other devices - does not break the embedded plastics Cleans well fabric and rubber mats Cleans rubber carpets up to 20mm high edges Hard carpets that are thick. Ours is universal and will work a long time. Blow system Without water cleaning With water cleaning automatic heating system Water conection 3/4

Condition: reconditioned (used), functionality: fully functional, working width: 400 mm, area performance: 1,600 m²/h, overall weight: 55 kg, warranty duration: 12 months, water tank capacity: 25 l, KARCHER BD 40/25 C Bp Pack Scrubber NEW 12V 85Ah SIAP GEL BATTERIES (2x) Fodpfxoymxi Ns Ag Aoph 400mm cleaning head equipped with a new medium-hard disc brush, enabling work on any surface. New natural rubber squeegees A built-in battery charger simplifies daily operation. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you get exactly what you see. TECHNICAL DATA: Working width (mm): 400 Suction width (mm): 770 Power supply: battery Clean/dirty water tank (l): 25/25 Theoretical capacity (m²/h): 1600 Weight (kg): 55 Dimensions (L x W x H) (mm): 800 x 575 x 830 INCLUDED: NEW 12V GEL BATTERIES 85Ah SIAP (2x) NEW 24V 500W suction turbine NEW 400mm PPL0.5 disc brush NEW suction hose NEW drain hose Squeegee blade with new rubbers Built-in battery charger 5 liter Tenzi Normal solution - FREE KEY FEATURES: The 25-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. Thanks to its design, the machine is highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The squeegee bar ensures precise solution extraction from the cleaned surface. The large working width (400mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: new, Year of construction: 2025, spindle speed (max.): 1,450 rpm, grinding spindle motor power: 7,500 W, grinding wheel diameter: 250 mm, We are a family producer of machines based in eastern Poland. All our machines are in 100% build in GRAFS factory in Poland. We present our heavy-duty but simple straight knife grinder suitable for a broad range of industrial knives, machine designed especially for: - different recycling blades, - chipper knives, (ALBACH, JENZ, BRUKS), - planer knives, - guilotine blades, - shredding knives, - granulator blades, The knife sharpening machine model SR Semi-auto can be supplied in different grinding lengths: mm 1.200, mm 1.800, mm 2.100 mm, 2.400 mm, 3.000 mm Sending inquiry to us, please let us know what grinding length you need. TECHNICAL FEATURES IN PRESENTED MODEL GRAFS SR: • Hand wheel for down feed of the grinding motor, • Automatic mechanical downfeed system (from 0,003 mm up to 0,03 mm) • Adjustable grinding parameters during operation (downfeed, number of head passes, spark-out passes). • Grinding wheel motor angle adjustment within 0–10° (for surface grinding). • Swiveling electromagnetic chuck / table with ±120° angular scale, “S” type polarity, magnetic force 120 N/cm². Equipped with T-slot channel on the operator side for clamping knives. • Exchangeable hardened steel guide strips on the machine guides ensuring long service life. • Manual positioning of the grinding head over the workpiece, (possibility of locking and unlocking carriage driving unit by lever), • Carriage movement relative to the trolley in the Y-axis, for centre head position relative the different knives angles. • Quick vertical travel of the grinding motor for faster setup and efficient grinding wheel replacement. • Reversal of grinding wheel rotation, • Powerful 7,5 kW grinding wheel motor for wheel sizes Ø175–250 mm. Quiet, vibration-free special grinding head, soft-start included, • Special wheel holder/adapter mounted on the motor shaft, allowing fast change of any grinding wheel (CBN, DIA, or segmented) using just 3 screws. • Automatic external magnetic coolant cleaner – MS60. • Variable carriage speed smoothly adjustable in the range 1–12 m/min. • Carriage run adjustment knob (potentiometer) for fine control. • Precision scale for downfeed / grinding motor position measurement. • Precision scale for blade angle measurement. • Complete documentation: manuals, operating system, electrical diagrams in English / German / Czech / Spanish, including EU Declaration of Conformity. • Base of the machine surface finish and protection: polyurethane anti-rust coating with acrylic hardener. Body painted RAL7012 or RAL7035; trolley and carriage RAL7021. • Adjustable anti-vibration leveling feet. • LED lamp in working area. • Very compact electric cabinet at the back of the machine base / body. • Coolant through the 2 nozzles either side of the grinding wheel, • Packing, shipment preparation, and truck loading included. Fpedpfx Agjgwct Ds Ajh FUNCTIONS INCLUDED: • Automatic down feed with mechanical feed system by ratchet, • Grinding wheel motor angle adjustment 0–10° (surface grinding option). • Smooth adjustment of carriage/head speed 1–16 m/min. • Manual positioning of the grinding head over the workpiece. • Carriage relative movement in the Y-axis. • Capability of grinding knives up to 360 mm in height. • Quick up/down travel of the grinding motor for fast setup and wheel replacement. • Automatic coolant filtration system. We are a producer from Poland, we provide after sale support and service with 12 month's warranty.

Condition: new, Year of construction: 2026, functionality: fully functional, Pros: • comprehensive processing (cutting, drilling, milling, engraving) • stable structure guaranteeing maximum precision and reliability • table with a vacuum system • free access to the machine enabling operation by one operator • the possibility of placing the entire palette of plates on the tray CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 150 mm Fpodpfeur N A Njx Ag Ash DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2026, Pros: • comprehensive processing (cutting, drilling, milling, engraving) • stable structure guaranteeing maximum precision and reliability • table with a vacuum system • free access to the machine enabling operation by one operator • the possibility of placing the entire palette of plates on the tray CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 150 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. Fedpfx Agoin Ernj Ajph SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2026, The CORMAK Z5050 AUTO industrial drill is an advanced column drilling machine designed for professional metalworking in workshops and industrial plants. The machine offers high precision in drilling and tapping, as well as reliability even under intensive operation. The control system monitors operating parameters, preventing settings that could overload the mechanical components, which ensures safety and process stability. Key advantages of the CORMAK Z5050 AUTO drill Precise metal machining thanks to a stable Ø180 mm column and a heavy-duty worktable measuring 545 × 470 mm. Safe operation – the system limits the possibility of setting parameters that could endanger the machine’s mechanics. Automatic spindle feed providing uniform feed during drilling and tapping. Integrated cooling system extending tool life and improving machining quality. Intuitive operation – a large touchscreen allows control of spindle speed, drilling depth, and feed settings. High performance – drilling up to Ø50 mm, tapping up to M30, maximum quill stroke of 245 mm. Ergonomic design – motorized table lifting and automatic tool ejection increase comfort and productivity. Design and technology The CORMAK Z5050 AUTO column drill features a massive column and a solid worktable, ensuring stability during drilling and tapping of heavy workpieces. The MK5 taper spindle works with an automatic feed system, while precise spindle guidance minimizes vibrations and deviations. The cooling system supports efficiency and operational safety during long-term use. Applications The CORMAK Z5050 AUTO column drill is used in professional mechanical and manufacturing facilities, including: Drilling in steel, aluminum, and other metal materials. Precision tapping of structural components. Fedpfx Aoyb A Rmsg Ajph Machine manufacturing and servicing, industrial workshops, and machining plants. Standard equipment Touchscreen display SERVO feed motor Keyed drill chuck 3–16 mm / B18 Arbor MK5 / B18 Reduction sleeves MK5/4, MK4/3, MK3/2 Motorized table lifting Cooling system Tapping mode LED lighting Digital readout of spindle speed and drilling depth Safety guard Technical data Maximum drilling capacity: 50 mm Drilling capacity in cast iron: 60 mm Maximum tapping capacity: M30 Drill chuck: 3–16 mm / B18 Spindle taper: MK5 Minimum spindle speed: 50 rpm Maximum spindle speed: 2000 rpm Speed change: stepless (50–250 / 250–2000) Drive system: gearbox Automatic spindle feed – range: 0–765 mm/rev Drilling table tilt: –45° to +45° Max. spindle-to-column distance: 360 mm Max. spindle-to-table distance: 570 mm Max. spindle-to-base plate distance: 1170 mm Quill stroke: 245 mm Column diameter: 180 mm Table width: 545 mm Table depth: 470 mm T-slots: 14 mm Motor power S1 100%: 3.7 kW Voltage: 400 V Dimensions (W × D × H): 700 × 1050 × 2430 mm Weight: 760 kg