Used Blow Molding Machine With Extruder for sale (65,897)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We are Penope Oy and we provide solutions for industry in Finland but also worldvide. We are official Makor dealer in Finland. Technical specs: Very little used vacuum extuding machine, year 2023. IN FEEDER FOR VACUUM mod. TEP 2000 reinforced version The in feeder, which is integral part of the vacuum coater, is equipped with high adherence belt and piece side guides. It is use to properly feed profiles in the vacuum head. TECHNICAL DATA TEP 2000 for vacuum Max. working width mm 220 Working height mm 850±30 Feed speed m/min 25÷150 Feed motor power (with inverter) kW 0,55 VACUUM EXTRUDING MACHINE mod. STORM WB Vacuum extruding machine for applying water base paints, designed in stainless steel plate (inox) and anti-adherence material. The machine is complete with a “cutting down” unit which allows a high reduction of the polluting emissions and a complete recovery of the excessive paint in order to reduce the consumption of paint to the minimum. PAINTING Extruding head realised in anti-adherence material. The head is complete with an adjustable profile guiding system, with paint adduction distributors. All the inner components are easily taken apart for a quick cleaning. A double diaphragm pneumatic pump with high capacity, transfers the paint from the tank to the extruding head, complete with a basket filter in stainless steel (inox) and an anti-pulse device for the interruption and feeding of the product. AUTOMATIC FILLING SYSTEM Automatic filling system for automatic decanting of the product directly from the paint drum to the tank of the machine. The system is also provided with an acoustic alarm in order to signal decrease of paint level inside the tank. Gjdpfx Alotqu Dij Aeud Thanks to this system it is possible to maintain in circulation a minimum quantity of the product. CONTROL PANEL General electrical switch-board which is integral part of the aspiration tower equipped with control panel for the start-up and the control of the machine. Two vacuum indicating gauges for the control of vacuum degree and of loss of filter efficiency. TECHNICAL DATA STORM WB Compressed air consumption (~5 bar) nl/min 1500 Working height mm 870 +/-30 Turbines capacity (each) mc/h 470÷600 mbar 200÷250 Turbine motor power x 3 Kw 11 AUTOMATIC PRE-WASHING SYSTEM The automatic PRE-washing system allows a quicker product change or an easier maintenance of the machine. The cycle consists of the following phases: 1) Through a three-way valve the feeding pump sends the remaining product to an external container till the tank is completely empty. 2) Through hydric plant (at customer’s charge) the product tank is filled with water. 3) Turbines are activated while the previous three-way valve goes back to working position so that the feed pump can send in circulation the clean water for a defined time necessary for the washing. 4) The three-way valve goes back to discharge position and the tank is emptied by the washing water. 5) The automatic filling system activates for the new product.

Condition: good (used), Manufacturer: Arburg Year of manufacture: 1998 Machine number: 174514 Type / Model: 420-1000-350 Operating hours: 65,000 h Automatic operating hours: 57,000 h Clamping force: 100 t Opening stroke: 500 mm Control system: Selogica Tie bar spacing: 420 x 420 mm Platen dimensions: 570 x 570 mm Minimum tool height: 250 mm Maximum distance between platens: 750 mm Screw diameter: 40 mm Maximum injection volume: 182 cm³ Shot weight: 153 g Holding force: 5 t Connection: 33.4 kW Gsdpfozl Dycox Al Aeud Accessories/Equipment: 2 core pulls, handling connection, pneumatic air valve Condition: good Weight: 3.43 t Dimensions: 3,200 x 1,100 x 1,800 mm

Condition: ready for operation (used), Year of construction: 2000, operating hours: 48,332 h, functionality: fully functional, machine/vehicle number: 179814, screw diameter: 30 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 79 A, For sale: ARBURG ALLROUNDER 420 C 800-100 injection molding machine Manufacturer: ARBURG Gsdpfx Aszim Tael Aoud Model: ALLROUNDER 420 C 800-100 Year of manufacture: 2000 Control system: Selogica Screw diameter: 30 mm Technical specifications Factory number: 179814 Supply voltage: 400 V Control voltage: 230 V / 24 V Connected power: 42 kW Rated current: 79 A Made in Germany Condition ARBURG hydraulic injection molding machine in good technical condition, regularly maintained. The machine is operational, can be tested, and is ready for immediate use. Key features Selogica control system 30 mm screw Stable, reliable operation Immediately available Can be viewed in operation Location: Sarkad, Hungary Seller: Variflux Kft. Upon request, we can send additional photos, videos, and technical information.

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 186931, clamping force: 600 kN, screw diameter: 35 mm, injection pressure: 1,820 bar, injection weight: 132 g, total length: 3,665 mm, total width: 1,485 mm, total height: 1,990 mm, overall weight: 2,330 kg, pressure: 1,820 bar, warranty duration: 6 months, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 320C 600-250U injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Gusdpfezk D Dxsx Al Asd

Year of construction: 2014, condition: ready for operation (used), functionality: fully functional, X-Floc EM400/440 Insulation Blowing Machine Professional high-performance blowing machine designed for processing a wide range of loose insulation and fibre materials. Suitable for open blowing, dry injection, damp-spray applications and material conveying, it can be used both on construction sites and as part of a stationary production system. The machine is equipped with a large loading hopper of approximately 1,000 litres, capable of holding around 5–6 standard bags of insulation material. Four rotating shredder shafts progressively break up and condition the compacted fibres before transferring them into the rotary airlock. The adjustable airlock feed gate allows precise control of the material flow. Depending on the version and material used, the EM400/440 can reach a processing capacity of up to approximately 1,600 kg/h. The adjustable air system delivers a maximum pressure of 540 mbar, with an air volume of approximately 100–430 m³/h for the EM400 and up to 100–680 m³/h for the EM440. Main features: Suitable for different insulation and fibre materials Two-stage material conditioning system Four high-speed shredder shafts Approx. 1,000-litre loading hopper Adjustable material flow with 10 feed-gate positions Low-dust loading system with transparent strip curtains Connection for external dust extraction Remote adjustment of air and material parameters Robust, low-maintenance industrial construction Easy access to internal components for servicing Direct NW 76 mm hose connection Suitable for mobile or stationary applications Gusdpfx Alszlggxo Asd The machine can be operated using a cable or optional wireless remote control, allowing the operator to adjust air output, material supply and pressure-control functions directly from the working area. Technical data: Processing capacity: up to approx. 1,600 kg/h Maximum pressure: 540 mbar Hopper volume: approx. 1,000 litres Shredder shafts: 4 Dimensions: approx. 1,285 × 1,000 × 1,800 mm Filling height: approx. 1,250 mm Hose outlet: NW 76 mm EM400 power: approx. 7.5 kW EM440 power: approx. 10.5 kW Weight: approx. 425 kg for EM400 / 445 kg for EM440 Maximum conveying height: approx. 20–45 m for EM400 / 20–60 m for EM440 Optional equipment may include a wireless remote control, pressure-relief valve, internal or external air amplifier, suction drum and dust-extraction system.

Condition: good (used), Year of construction: 1994, clamping force: 150 kN, screw diameter: 55 mm, clearance between the columns: 51 mm, displacement volume: 475 cm³, injection weight: 428 g, installation height: 660 mm, Injection molding machine – Maschine-Engel ES 700/150 Clamping force: 150 tons Screw diameter: 55 mm Gjdpfx Alozklz Eo Aoud Stroke volume: 475 mm Shot weight: 428 g Tool mounting height: 250 mm – 660 mm

Condition: good (used), Year of construction: 2002, operating hours: 77,288 h, functionality: fully functional, machine/vehicle number: 26406, clamping force: 250 kN, injection weight: 64 g, We are selling a Battenfeld 250/130 machine, year 2002. Clamping force: 25 tons, shot weight: 64 g. Guedpfxjya Ev Ao Al Aod For any further information, please feel free to contact us.

Condition: excellent (used), Year of construction: 2015, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: 61024546, clamping force: 800 kN, screw diameter: 40 mm, injection weight: 180 g, number of injections: 1, type of input current: three-phase, - MC6 control system - APC Gsdpfxsya Egus Al Ajud

Condition: excellent (used), Year of construction: 2004, ENGEL DUO 11050/2300 Injection Molding Machine Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h Type: Hydraulic injection molding machine Category: Large-size injection molding machine Clamping force: 23,000 kN / 2300 tons Clamping Unit Clamping force: 23,000 kN Dimensions of mold mounting plates: 2900 x 2500 mm Distance between columns: 2000 x 1600 mm Minimum mold height: 700 mm Maximum mold height: 1890 mm Maximum opening width: 3800 mm Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm3 Injection weight (PS): 8071 g Injection pressure: 1600 bar Additional equipment according to available data Godpfx Alszkatcs Ajud Number of hydraulic cores: 2 Number of mold heating zones: 36 Number of hydraulic cascades: 10 Magnetic platens Mold tilting option Screw replaced in 2011 Screw reinforced for special materials Machine without robot Dimensions and weight Weight of the main unit: 113 t Weight of the control cabinet / additional components: 18 t Approximate total weight: 131 t

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX injection molding machine Year of manufacture: 2008 Robot: Wittmann Control: MC5 Equipment Fully hydraulic clamping unit MC5 control with color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials Screw Ø 120 mm with abrasion protection Check valve Open nozzle Clamping unit Gusdpfx Aszkanysl Aod Clamping force: 11,000 kN Opening force: 770 kN Platen dimensions: 2210 × 1910 mm Distance between columns: 1550 × 1250 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum mold height: 1200 mm Maximum opening: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1758 bar Injection volume: 6786 cm³ Injection weight (PS): 6175 g Screw speed: 103 / 145 rpm Injection rate: 1118 cm³/s Injection rate with accumulator: 1696 cm³/s Plasticizing unit Designed for processing thermoplastic materials Version with abrasion protection Check valve Open nozzle Electro-hydraulic system Pump motor power: 132 kW Heater power: 82 kW Number of heating zones: 7 Number of dry cycles (Euromap): 802 cycles/h Oil tank capacity: 2440 l Dimensions and weight Dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Weight: 73 t

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 300-2000 CX Injection Molding Machine Year of manufacture: 2010 Control system: MC5 Type: Hydraulic injection molding machine Equipment Fully hydraulic clamping unit MC5 control system with a color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials 70 mm screw with abrasion protection Check valve Open nozzle Clamping Unit Clamping force: 3000 kN Platen dimensions: 995 × 1050 mm Tie bar spacing: 630 × 630 mm Opening stroke: 820 mm Maximum opening: 1150 mm Minimum mold height: 330 mm Ejector stroke: 200 mm Gjdpfx Aezkaflsl Ajud Ejector force: 57.7 / 28.3 kN Injection Unit Screw diameter: 70 mm Injection pressure: 1877 bar Injection volume: 1078 cm³ Injection weight (PS): 981 g Injection rate: 385 cm³/s Injection rate with accumulator: 1155 cm³/s Screw speed: 220 / 310 rpm Plasticizing Unit For thermoplastic materials Abrasion protection Check valve Open nozzle Electro-hydraulic System Pump motor power: 55 kW Heater power: 29.2 kW Number of heating zones: 6 Number of dry cycles: 1350 cycles/h Oil tank capacity: 720 l Dimensions and Weight Dimensions: 6500 × 2200 × 2300 mm Weight: 14.5 t

Condition: good (used), Year of construction: 2005, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, displacement volume: 318 cm³, injection weight: 289 g, Year of manufacture: 2005 Operating hours: 80,228 h Clamping force: 160 tons Gedpfx Alozkqf As Aeud Distance between tie bars: 520 x 520 mm Screw diameter: 45 mm Injection volume: 318 ccm Injection weight: 289 g for PS Equipment: Krauss Maffei robot, core pull, Euromap, 3 additional injection units

Condition: excellent (used), Year of construction: 2004, Krauss Maffei KM 350–2700 C2+ injection molding machine Gedpezkadbsfx Al Aeud Year of manufacture: 2004 Control system: MC4 Technical data Clamping unit * Clamping force: 3500 kN (350 tons) * Platen dimensions: 1060 × 1095 mm * Tie bar spacing: 710 × 710 mm * Opening stroke: 920 mm * Maximum opening: 1300 mm * Minimum mold height: 380 mm * Ejector stroke: 250 mm * Ejector force: 95 / 48 kN Injection unit * Screw diameter: 80 mm * Injection pressure: 1829 bar * Injection volume: 1433 cm³ * Injection shot weight (PS): 1304 g * Screw speed: 218 / 284 rpm * Maximum injection capacity: 1508 cm³/s Plasticizing system * Version for thermoplastic materials * Abrasion protection * Check valve * Open nozzle Drive system * Pump motor power: 75 kW * Heater power: 36 kW * Number of heating zones: 7 * Oil tank capacity: 720 l * Dry cycle time (Euromap): 1550 cycles/h Dimensions and weight * Dimensions (L × W × H): 6910 × 2040 × 2410 mm * Machine weight: 16.7 t Additional information * MC4 control system with color monitor * Machine prepared for modernization with the ESS system (energy saving of 30–60%)

Condition: good (used), Year of construction: 1991, Edge banding machine for shaped parts, edge bander, edge banding machine -Workpiece thickness: 10-85 mm Gedpfxob A Nine Al Aeud -Heating fan: 6 kW, pre-coated edges -Cutting knife -Edge plate -Transport dimensions: 900/700/H1080 mm -Weight: 135 kg

Condition: good (used), Year of construction: 1992, Spray machine -Closing force: 25 tons -Screw diameter: 22 mm -Unilog 2040 control unit -Slat spacing: 250x250 mm -Data collection terminal -Parts removal device, manufacturer ASS -Temperature control unit, manufacturer Single Gsdpfx Aeb A H Rnjl Aeud

Condition: used, Praline forming machine, praline shaper, -Conveyor belt missing -Chocolate forming machine -Execution: stable -Conveyor belt width: 110 mm -2x press rollers: Ø 145 mm Gjdpfx Alodngv Es Aeud -1x molded body: with ejection -1x machine with shape ellipse: approx. 20 x 35 mm -Transport dimensions: 1540/520/H1420 mm -Weight: 280 kg

Condition: used, Year of construction: 1989, Used machine Compact machine for processing molded parts Processes edge material coated with hot-melt adhesive, which is reactivated by hot air Automatic workpiece feed is achieved by pressing the workpiece against the central, driven pressure roller, ensuring uniform adhesive reactivation and consistent bonding reliability Thermostatic temperature control via analog thermostat Godjwwxykopfx Al Ajud Maintenance-free three-phase hot air blower for continuous operation Automatic airflow redirection Pneumatically operated roller separating device cuts even the toughest veneer and PVC edges Foot switch for molded part processing Workpiece thickness: 10 - 50 mm Heating output: 3 kW Connection load: 3.3 kW Minimum workpiece width: approx. 25 mm Edge thickness: approx. 0.5 - 1 mm Minimum internal radius: approx. 25 mm Feed rate: 4 m/min Pneumatic system: 6 bar Weight: approx. 105 kg Availability: short-term Location: Röllbach

Condition: excellent (used), Year of construction: 2010, Stork S+ 9000-8650 Injection Moulding Machine Guodpfxsxyqyrj Al Aod Control system: CDS700 Year of manufacture: 2010 The machine is in very good technical condition, fully operational, and ready for immediate use in an industrial facility. It comes complete with a Sytrama 101 GL robot, enabling automation of the injection process. Clamping Unit Clamping force: 9000 kN Platen dimensions (H × W): 1570 × 1560 mm Tie bar spacing (H × W): 1010 × 1010 mm Min. / Max. mould height: 300 – 1190 mm Max. opening stroke: 2290 mm Locating ring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 98 mm Injection volume: 4010 cm³ Shot weight (PS): 3690 g Injection pressure: 1650 bar Max. injection speed: 400 mm/s Additional equipment Pneumatic valves – 4 pcs. Core pulls – 1 fixed / 1 moving Robot included: Sytrama 101 GL The machine is available for inspection and testing under power. Photos and demonstration videos available upon request. Loading and transport can be arranged.

Condition: used, Year of construction: 2007, operating hours: 71,393 h, functionality: fully functional, machine/vehicle number: 61010638, clamping force: 3,000 kN, We are offering this used KraussMaffei KM 300-1400 CX injection molding machine, manufactured in 2007. Manufacturer: KraussMaffei Model: KM 300-1400 CX Year of manufacture: 2007 Gusdpfx Aezky Nqel Aed If you have any questions or require further information, please do not hesitate to contact us.

Year of construction: 2015, condition: used, for timber frame wall construction, consisting of: 1 cellulose bale shredder flocfeeder, single-door, dimensions (W x H x D): approx. 150x350x120 cm, 1 blowing machine maxifloc, with blower and dosing unit, throughput: max. 1,400 kg/h, 1 distribution unit easyfloc, working area: approx. 300x100 cm, with touch panel, no type plate found, various hoses, 1 platform trolley, self-built. Gujdjzha Egjpfx Al Aed

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 161729, clamping force: 1,000 kN, screw diameter: 40 mm, injection weight: 158 g, ejector force: 40,000 N, total length: 4,225 mm, total width: 1,370 mm, total height: 1,200 mm, overall weight: 3,080 kg, heating capacity: 5.5 kW (7.48 HP), pump power: 18,500 W, power: 24.3 kW (33.04 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, input current: 96 A, Equipment: documentation/manual, We are offering this used Arburg 370M 1000-250 injection moulding machine, year of manufacture 1994. Serial number: 161729 Year: 1994 Operating voltage: 380 V 3~ 50 Hz Control voltage (230 V): 220 V ~ 50 Hz Gjdjyrczgepfx Al Ajud Control circuit voltage: 24 V = Total rated current: 96.00 A Total connected load: 55.0 kW Drive upgraded to xD card! If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Gedpfxeyw Aa Us Al Asud Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Tool opening force: 220 kN Driving force of moving platen: opening: 105 kN closing: 95 kN Gujdpexu Uvaefx Al Aod Platen size (h x v): 1,060 x 1,095 mm Daylight opening (h x v): 710 x 710 mm Tool opening stroke: 920 mm Minimum tool mounting height: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Control zones cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 l Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum tool weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement: 1,047 cm3 Shot weight for PS: 953 g Injection flow rate: 527 cm3/s Screw speed standard / option: 1/min. 285/349 Screw speed standard or stage 1: 95 PS Screw speed option or stage 2: 117 PS Nozzle clamping force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color display and Floppy disk drive (3.5 inches) for data backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with check ring and open nozzle Nozzle radius: 15.00 mm Nozzle orifice: 6.00 mm 2726

Condition: defective spare-parts repository (used), Year of construction: 2006, functionality: not functional, machine/vehicle number: 160091, clamping force: 2,200 kN, Title: ENGEL Victory 1350/220 Tech (2006) - Tie-barless - Incl. Original ENGEL spare parts offer! General condition: The machine was in production use until recently. It is currently being sold as "in need of repair / for spare parts" (not functional due to damage to the internal hydraulic pump). Ideal for dealers, machine repair companies, or injection molding companies with their own repair facilities. Additional advantage / bonus: We will provide the buyer with the official ENGEL repair offer (total value: approx. €20,200). This includes the exact original part numbers (OEM) for all required components (hydraulic pump combination RKP140_80, Rexroth/STAR linear systems, piston rod seals, and complete wear ring sets). This will save you time in troubleshooting and provide the perfect template for the repair. Technical data: Manufacturer: ENGEL (Austria) Model: Victory 1350/220 Tech Year of manufacture: 2006 Machine no. (serial number): 160091 Clamping force: 220 tons (2,200 kN) Tie-barless technology: Maximum flexibility for large molds and quick changeovers Tie bar diameter: 60 mm (large-volume version) Control system: CC100 / CC200 Machine weight: approx. 14,200 kg Gujdpfx Aozc Hn Sel Asd Terms of sale: Sale is strictly "as is" (ex works / EXW). The buyer bears all costs for disassembly, packaging, loading, and transport. Inspection on site is possible after prior arrangement.

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: X55766, clamping force: 5,500 kN, screw diameter: 98 mm, clearance between the columns: 830 mm, displacement volume: 3,394 cm³, 550-ton machine in good condition. Guodpfx Aezlt Aasl Aod