Used Boy 55 E Vv for sale (72,577)

Condition: good (used), fuel type: diesel, Year of construction: 2014, operating hours: 1,064 h, Hamm HD 8 VV Roller / Road Roller / Tandem Roller 2014 Kubota Diesel Video can be sent via Whatsapp. Ongoing stock, see website. Prices ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices, in AS-IS condition, without guarantees. (see our general terms and conditions) For a viewing and/or test drive, you can make an appointment with no obligation. Please call in advance, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 Dksdpfxeywu Nnj Akzop 5391 LR Nuland

Condition: good (used), Year of construction: 2023, operating hours: 159 h, Used, oil-free, variable 55 kW screw compressor Immediately available! (Subject to prior sale!) ALMIG LENTO 55 WK (water-cooled) with Air Control Premium controller The compressor is in very good condition and has only run for 157 hours so far. Year of manufacture: 2023 Dkedpsxud Eqefx Akzop Operating hours: 157 h Technical data Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: new, Year of construction: 2025, operating hours: 2 h, machine/vehicle number: LENTO 55WK, New Speed-controlled, oil free, water injected screw compressor ALMIG LENTO 55 LK Year of construction: 2025 technical spezifications: Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Djdpfoc Rt D Nox Akzekp Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: excellent (used), Year of construction: 2016, Format 4 Kappa 550 Positioning control e-motion – TFT screen Year of manufacture: 2016 320 cm sliding table 5.5 kW motor with brake Scoring unit control Max cutting height: 200 mm Saw blade: 250 - 550 mm Speeds: 3000 / 4000 / 5000 rpm Scoring blade rotation speed: 9000 rpm Motorized rip fence Saw blade tilting up to 45 degrees, single-sided Electric height adjustment Dsdox Rugtepfx Akzjkp Operator panel at eye level Crosscut fence with digital display Movable support rail with digital angle display Crosscut fence with length compensation Extraction connection: 120 mm and 100 mm Extension arm with swing-away function Cutting width: 1348 mm Crosscut fence up to 3200 mm Control station on sliding table Dimensions (without extension arm): 3400 x 2200 mm Weight: 1300 kg

Condition: ready for operation (used), Year of construction: 2009, Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, rotation range C: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, tool holder: HSK-E50, spindle speed: 42000rpm, max. workpiece weight: 200kg, feed: 80m/min, max. tool length/diameter: 250mm/80mm. Machine dimensions X/Y/Z: approx. 3250mm/2950mm/2900mm, weight: approx. 9500kg, control: Heidenhain iTNC530. Documentation available. An on-site inspection is possible. The machine is located in China. Dkjdjxf Ii Uopfx Akzjp

Year of construction: 2007, condition: ready for operation (used), A complete bottle filling, sterilizing, capping, labelling, cartoning and palletizing line for the wine industry is available. Bottle filling capacity: 4000 bottles/h, bottle format sets: 1l and 0.75l Schlegel/Bordeaux/Bugunder/0.5l/0.25l, sterilizer capacity: 4000 bottles/h, capper capacity: 8000 bottles/h, labelling capacity: 10000 bottles/h, capping capacity: 10000 bottles/h, carton formats: 12 and 6-bottle crates/12 and 6-bottle cartons, palletizing capacity: 1000 cartons/h. Line components: 1) Normpack Compact Form CF 670/980 carton folding machine, year of manufacture: 2000, output: approx. 650 cartons/h, 2) Stork VV-24 L.W. bottle filling machine, Year of manufacture: 1977, 3) Silmo ST XII/110 v ozone immersion bath sterilizer, year of manufacture: 1983, bottle formats: all standard wine bottles, 4) Miho LC 2000 caustic tester, year of manufacture: 2003, 5) Kapsler Robino & Galandrino Monoblocco Fenix 3, year of manufacture: 2002, 6) Syscona Unicount closure checker with counter for cork and metal closures, 7) Garnep Lebetta 4/3/18 1320 labeller, year of manufacture: 2017, including 2x wet gluing units, 3x SK units, camera system for rough alignment of bottles and domino laser for imprints, 8) Adelski PP2004 Longcap automatic capping machine, year of manufacture: 2007, 9) Adelski MCA PV 6541/1/210 AVM2104 automatic capping machine, year of manufacture: 1999, 10) Corker Bertolaso Delta, year of manufacture: 1977, 11) Carton sealing machine Normpack NCF-047, year of manufacture: 2001, including hot melt gluing unit, 12) Packaging machine Kettner Robot Junior Packer BE 2-T, year of manufacture: 1992, 13) Pallet loading machine Kettner Pressant Universal 1200, year of manufacture: 1992, 14) Crate labeling machine Weber Legi-Air 40XX, year of manufacture: 2004, 15) Dryer Okema T3, year of manufacture: 1999, 16) Carton printing machine Blum CompactLine 3. 0, number of heads: 8, printing options: double-sided, 17) Silmo 40g ozone generator, year of manufacture: 1983, 18) Schaberger glass lifting machine, year of manufacture: 1977, including new glass head, 12-bottle crate head and bottle table. Documentation available. On-site inspection is possible. Dsdpfx Asvur Htjkzjkp

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). OilQuick OQ70-55 Adapter Plate / Bolt-on Adapter / NEW / in stock & immediately available Price: €4,190.00 net / €4,986.10 gross A drawing of the hole pattern is available in the photos. - 2x 1/2" coupling - 2x 3/4" Poly couplings - 2x 1" coupling - Also available from stock with leak oil line coupling! Additional charge: €440.00 net - Excavator class: 18 to 32 tons - Weight: 302 kg Suitable for many attachments such as hydraulic breakers, sorting grabs, and also for the following Westtech products: Dkedpfx Aoyl Hgyjkzsp - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (requires leak oil line) - Westtech CS580 (requires leak oil line) - Westtech CS780 (requires leak oil line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All matching Westtech products are also in stock and immediately available! We have many more OilQuick adapter plates in stock for immediate delivery! Mr. Herden (phone ...) will be happy to assist you. Financing offers available on request. We are official sales and service partners of: - OilQuick - Holp - Gierking GMT - Weber MT - Westtech - DMS - Seppi M. - Magni Telescopic Handlers - JCB Construction Machinery - Mercedes-Benz - Iveco With 800 used commercial vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete OilQuick range! Errors and prior sale excepted! = Additional Information = Application: Construction Please contact Marius Herden for more information.

Condition: new, functionality: fully functional, machine/vehicle number: 12312572, empty load weight: 690 kg, maximum load weight: 1,310 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,550 mm, loading space height: 300 mm, suspension: other, Year of construction: 2026, Loading area approx. 1550 mm x 3050 mm External dimensions approx. 1670 mm x 4410 mm Permissible total weight: 2000 kg Payload: approx. 1340 kg (payload varies depending on optional equipment) Manufacturer: Debon Special features - Rear tipper "PW1.2 LUX" - Electric hydraulic pump (battery) - Charging contacts in the frame profile (12V / compatible with chargers) - 6 lashing eyes in the loading area - H-frame (mounted / removable) - Aluminum side extension 300 mm (foldable / removable) - Aluminum sideboards 300 mm (foldable / removable) - Vehicle documents included Additional equipment - Floor plate: galvanized steel sheet on a screen-printed plywood board - Chocks + holder Chassis - Axle and drawbar completely hot-dip galvanized | Rubber suspension axle | V-drawbar with ball coupling | Automatic heavy-duty support wheel Electrical system - 12 volts | 13-pin plug | Fog light | Outline lights Dkodpsi R Hwmsfx Akzep If you would like to purchase this trailer or have further questions, please use our internal tipping trailer reference "No. 12312572".

Condition: new, functionality: fully functional, machine/vehicle number: 12311666, empty load weight: 530 kg, maximum load weight: 1,470 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,550 mm, suspension: other, Year of construction: 2026, Product information "Debon tipper trailer DK 155x305cm 2.0t | Electric pump | Special offer" Tipper trailer with electric pump The DK tipping trailer is an exceptionally practical and safe two-axle car trailer made of aluminum. The generous loading area measures 3.05 x 1.55 meters and can be positioned particularly flexibly for unloading in this rear-tipping trailer. The folding side walls are 30 centimeters high. With an unladen weight of 530 kilograms, the tipping trailer can be loaded with a payload of up to 1,470 kilograms. The front wall facing the towing vehicle is extra high. The wooden floor panel in this rear-tipping trailer is covered with a steel sheet. The floor frame profile is equipped with six lashing eyes. Convenience is a priority An electric pump can be used to tilt the loading area to the rear. An overrun brake ensures that the towing vehicle is not pushed forward by the load when stopping or on a slope. All load-bearing steel frame parts are hot-dip galvanized. Dkjdpfx Aksi R Hvhjzep Optionally, a 60-centimeter-high mesh extension can be supplied if required. Special features Double-walled, anodized aluminum side walls Rear tipper with electric pump + battery Heavy-duty support wheel Additional features Side walls: removable, foldable Floor panel: sturdy screen-printed floor / steel sheet floor on the floor panel Axle and drawbar completely hot-dip galvanized 6 tie-down points in the floor 12-volt electrical system, 13-pin connector with reversing light Frame welded and completely hot-dip galvanized. Other Vehicle registration document / registration certificate part 2 Accessories available at an extra charge - see below If you would like to purchase this trailer or have further questions about trailers, please use our internal tipping trailer "No. 1666".

Year of construction: 2024, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Westtech Woodcracker C350 Felling Grapple / incl. Collecting Grapple / incl. Tiltator / incl. Autospeed function / incl. electro-hydraulic switching / in stock & immediately available / Year of manufacture: 2024 / DEMO unit / very good condition Price: €36,990.00 net / €44,018.10 gross Cutting diameter softwood (mm): 400 Cutting diameter hardwood (mm): 350 Grapple opening (mm): 1,430 Shear opening (mm): 700 Own weight (basic - fully equipped) (kg): 1,150 – 1,620 Recommended main hydraulic flow rate (l/min): 70 – 150 Recommended operating pressure (bar): 280 Recommended auxiliary hydraulic flow rate (l/min): 45–60 Carrier vehicle operating weight (t): 14 – 20 Features: - Collecting grapple - Autospeed function - Endless rotating tiltator - Electro-hydraulic switching between collecting grapple and tiltator - OilQuick OQ 70/55 adapter plate Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse has a very large selection of various Westtech products that are immediately available! Mr. Herden (tel.) will be happy to assist you. On request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni Telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech range! Errors and prior sale excepted! Internal no.: 241097 = More information = Dkjdpfjyltvhox Akzsp New: No Part suitable for: Intended use: Forestry Please contact Marius Herden for more information.

Condition: used, Year of construction: 2020, operating hours: 245 h, omponents / E.10.010 Drawbar ball coupling Ø 80 mm / E.10.020 Hydraulic / Support foot / Standard PTO shaft / PTO shaft with 6 teeth / Drive with PTO shaft speed 540 / rpm / E.10.200 3-speed gearbox / Machine speed / norm Dsdpfx Ajrywdxokzskp

Condition: new, axle configuration: 3 axles, Year of construction: 2022, Equipment: ABS, Technical Data for EBERT TLS 43 ATV Special Low Loader: Permissible king pin load: 19,000 kg Permissible axle load: 36,000 kg Gross vehicle weight: 55,000 kg Unladen weight (per DIN): approx. 15,500 kg Lower deck length i.L.: approx. 6,650 mm + 4,000 mm Axle table length: 3,550 mm External width: 2,550 mm Loading edge/lower deck: approx. 200 mm – 350 mm Sliding table length: 500 mm Lower deck widening to: 3,050 mm Lower deck extendable by: 4,000 mm B-dimension: 13,300 mm Entire vehicle flame-sprayed galvanized, with epoxy primer and 2K paint finish Oversize warning signs front and rear, with red/white panels Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single wheel suspension, hydraulic steering and hydraulic suspension Front high-bed: Side panels 600 mm high Corners at front of high-bed angled Exterior-access doors in front corners (left and right) Lockable storage box with lid behind the front wall; height 600 mm, width 2,480 mm, depth 7,500 mm Spare wheel on high-bed, right side behind partition wall Staircase on right side for access from lower deck to front high-bed Hydraulic coupling for uncoupling on left side (6-way multi-faster coupling) 6 external lashing points, 3,000 kg each (fold-down lashing eyes) on high-bed 2 lashing points, 5,000 kg each, on upper longitudinal beams (to the rear) Lower deck: Climbing aids at the boom – pull-out Outer frame thickness 8 mm Lower deck extendable by 4,000 mm, lockable every 500 mm With sliding table, lockable every 250 mm 28 external lashing points, 10,000 kg each, on the outer frame 24 plug-in sockets 90 x 90, evenly distributed for lower deck widening to 3,050 mm Between extension beams, 50 mm hardwood planks are placed, protruding by 10 mm Dsdpfeyfu N Aox Akzskp Rear high-bed: Front of rear high-bed sloped and perforated to allow retrofitting of ramp mount profiles (galvanized adapters) At rear: ramp mount profiles (Altec) – C rails 8 external lashing points, 10,000 kg each, on rear high-bed 6 lashing points, 5,000 kg each, in the excavator recess 10 lashing points, 5,000 kg each, for oversize loads on the outer frame Excavator recess can be closed at front and rear with insertable wooden floor plates Electrics: Use NATO spiral cable; power supplied by tractor unit Roof beacon centered at rear LED side marker lights Standard vertically mounted taillight (LC5) Work lamp on the high-bed to illuminate the lower deck Oversize warning signs front and rear, with controls for uncoupling, safety sensor, and suspension pressure switch Air: Aluminum air reservoir 80 l TEBS modulator Slide-out lock left and right (valve located at rear high-bed sides) Double release valve Hydraulics: Hydraulic system on high-bed for steering, suspension, and detachable gooseneck Accessories: 2 x 4 pieces hardwood planks for lower deck widening and intermediate table 2 wheel chocks for uncoupling 4 wheel chocks On request, we can provide a leasing or financing offer. Mr. Ebert (phone...) will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale.

Condition: used, Year of construction: 2021, operating hours: 998 h, Sennebogen 355 E, telehandler, year of manufacture: 2021, operating hours: only 998h!, incl. 2,500L grab bucket, additional hydraulics, hydraulic quick coupler, engine: Cummins B4.5-C165 [140 hp/103 kW], all-wheel drive and all-wheel steering (4x4x4) – crab steering, lifting capacity: 5,500kg, lifting height: 8,450mm, automatic level control, elevating cab to 4,250mm, operating weight: 11,800kg, very good condition, immediately ready for use. Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ... ). We are happy to assist you. Further information is available on our website. Subject to prior sale and errors excepted. Rental possible Dkjdpsyfq Tdofx Akzjp = More information = Please contact Tobias Ebert for further details.

Condition: used, gearing type: automatic, lifting height: 8,450 mm, Year of construction: 2021, operating hours: 998 h, Sennebogen 355 E, telehandler, year of manufacture: 2021, operating hours: only 998h!, incl. 2,500 l grab bucket, additional hydraulics, hydraulic quick coupler, engine: Cummins B4.5-C165 [140 hp/103 kW], all-wheel drive and all-wheel steering (4x4x4) – crab steering, lifting capacity: 5,500 kg, lifting height: 8,450 mm, self-levelling, lifting cab 4,250 mm, operating weight: 11,800 kg, very good condition, ready for immediate use. On request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel.) will be happy to assist you. For more information, please visit our website. Subject to prior sale and errors. Cab, rental possible = More information = Engine brand: Diesel Lifting capacity: 5,500 kg Dsdjyfq Nrspfx Akzjkp Please contact Tobias Ebert for further information.

Condition: used, For enquiries regarding the attachment, please contact Mr. Herden (by phone). Holp Vario Bucket / VL.112.700 / OQ70/55 / HARDOX / wear plates / NEW / in stock & available immediately Price: €6,520.00 net / €7,758.80 gross - Suitable excavator size: 14 to 25 tons - Own weight approx.: 570 kg - SAE capacity: 700 litres - Slope angle: 54° - Trench bottom radius: 150 mm - Incl. wear plates - The bucket is made entirely from HARDOX. Advantages of the Holp Vario Bucket: - Large working surfaces - Robust design using high-quality materials - Minimal weight due to optimised triangular construction - Rounded bottom - Two working openings - Rectangular working opening Djdjyhyl Sjpfx Akzekp - V-shaped - The Vario Bucket impresses with high performance and clean operation. The V-shaped opening enables precise dumping and delivers extremely high ditch cleaning efficiency in drag operation. Wherever higher speed and flexibility are required to tackle different tasks, the Vario Bucket is a real advantage on the construction site: it is faster, more adaptable, and safer. We have many more Holp products in stock and available for immediate delivery! Mr. Herden (tel.) is at your service. Financing options available on request. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Further, with 800 used vehicles in stock, we are one of Germany’s largest commercial vehicle dealers. We supply the complete Holp range! Subject to errors and prior sale. = Further information = New: Yes Application: Construction Unladen weight: 570 kg Contact Marius Herden for further information.

Condition: new, For inquiries regarding attachments, Mr. Herden will be happy to assist you (by phone: [number]). DMS SG22090 Sorting Grab / including rotator / brand new / in stock & immediately available / including bolt-on teeth Price: €18,590.00 net / €22,122.10 gross - Shell width: 900 mm - Capacity: 542 l - Weight (without rotator): 897 kg - Rotator weight: 168 kg - Operating pressure: 320 bar - Closing force: 52 kN - Torque: 4,200 Nm - Opening width: 1,900 mm - Excavator class: 17 - 22 t Optional: - Softgrip XL Set: €3,120.00 net - MS10 adaptor plate: €2,645.00 net - MS21 adaptor plate: €3,185.00 net - OilQuick OQ 70/55 adaptor plate (currently installed): €5,790.00 net We have many more DMS grabs in stock and available for immediate delivery! Mr. Herden ([phone number]) will be happy to assist you. We are also happy to provide you with a financing offer upon request. We are an official distribution and service partner for the following brands: - Westtech - Magni Telehandlers - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - JCB Construction Machinery - Mercedes-Benz - Iveco With 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete DMS product range for you! Errors and prior sale excepted! = More information = Intended use: Construction Dkodpfx Akeykhtlozjp Please contact Marius Herden for more information.

Year of construction: 2022, condition: used, For enquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone at ...). Westtech Woodcracker CS780 / incl. Power-Tiltator / incl. OQ 70/55 adapter plate / only 93 operating hours / year of manufacture: 2022 / immediately available / excellent condition! Price: €47,890.00 net / €56,989.10 gross Features: - Power-Tiltator, infinitely rotatable - Cutting diameter: 750 mm - Grab opening width: 1,600 mm - Own weight (basic - fully equipped): 2,000 - 2,200 kg - Recommended oil flow: 120 - 170 l/min - Recommended auxiliary circuit flow: 50 - 70 l/min - Recommended operating pressure: 280 bar - Carrier vehicle operating weight: 20 - 28 t - Tilt function for cutting process: automatic - Saw box: actively sprung - Saw chain lubrication: grease Equipment: - incl. Power-Tiltator - incl. OQ 70/55 adapter plate We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Dsdpfx Aoyi R Dqskzekp We keep a large selection of various Westtech products in stock for immediate delivery! Mr. Herden (Tel. ...) will be happy to assist you. We are happy to provide you with a tailored financing offer upon request. We are an official sales and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni telescopic handlers - JCB construction machinery - Mercedes-Benz - Iveco Also, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Errors and prior sale excepted! Internal ID: 122025 = Additional information = New: No Part suitable for: Forestry applications Please contact Marius Herden for further information.

Year of construction: 2024, condition: used, For inquiries about the attachment, Mr. Herden is happy to assist you (by phone). Westtech Woodcracker G1650 Grubbing Rake / incl. grapple arms / incl. OQ70/55 adapter plate / in stock & immediately available / Year of manufacture: 2024 / DEMO unit / excellent condition Price: €24,690.00 net / €29,381.10 gross - Working width (mm): 1,650 - Own weight (kg): 1,610 - Recommended oil flow (l/min): 50 - 90 - Recommended operating pressure (bar): 200 - 250 - Carrier unit operating weight (t): 20 - 25 Equipment: - Including grapple arms - Including OQ70/55 adapter plate We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We have a very large selection of various Westtech products available in our warehouse and ready to ship! Mr. Herden (phone) is happy to assist you. We are pleased to offer you a financing proposal upon request. We are an official sales and service partner of Westtech. We are an official sales and service partner of Gierking GMT. We are an official sales and service partner of OilQuick. We are an official sales and service partner of Weber MT. We are an official sales and service partner of Holp. We are an official sales and service partner of DMS. We are an official sales and service partner of Seppi M. We are an official sales and service partner of Magni telehandlers. We are an official sales and service partner of JCB construction machinery. We are an official sales and service partner of Mercedes-Benz. We are an official sales and service partner of Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker product range! Errors and prior sale excepted! Internal no: 523058 Dkedpfx Aksyi R Aaszep = More information = New: No Application: Construction Please contact Marius Herden for more information.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 1,651 h, functionality: fully functional, machine/vehicle number: G393, operating pressure: 500 bar, total length: 1,175 mm, total height: 945 mm, total width: 760 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 290 kg, input voltage: 400 V, power: 15 kW (20.39 HP), input current: 32 A, noise level: 78 dB, pressure (max.): 500 bar, input frequency: 50 Hz, water pressure: 500 bar, Dear Sir or Madam, Dodpfxsxugifj Akzjkp For sale is an overhauled Falch WheelJet 15 Electric without accessories. 500 bar 15 l/min 32A plug Best regards, STS-Reinigungstechnik Team

Condition: new, Year of construction: 2024, functionality: fully functional, The REPLAY evo range offers basic products without sacrificing excellent quality. Equipped with advanced new and exclusive systems, it represents the most competitive solution of the new machines with bell from minipack®-torre. REPLAY 55 evo combines technological performance with essential and compact shapes, without sacrificing the excellent quality that characterizes minipack®-torre machines. - Power supply V 200/230 - Phase ph 1 - Installed MAX power kW 3.15 - Production per hour p/h (pph): 0-300 - Sealing bar useful dimensions: 540x390 mm - MAX product dimensions: 500x380x200 mm - MAX coil dimensions (diameter): 250 mm - MAX film reel dimensions (width): 600 mm - Work table height: 940 mm Dedpfx Aouakl Hjkzskp - Machine dimensions with protective cover open: 1260x810x1400mm - Machine dimensions with closed protective cover: 1260x810x1190mm - Machine weight (net/gross): 105/126 kg

Year of construction: 1999, operating hours: 16,484 h, condition: good (used), Brand: Collin Lab & Pilot Solutions GmbH Dkodpsyub Rlsfx Akzsp Extruder model: E 30 M Low Boy Screw type: Single screw Screw diameter: 30 mm L/D ratio: 25 mm Operating hours: 16,484 h

Condition: new, Exhibition machine Infeed width: 1,400 mm Infeed height: 550 mm Rotor diameter: 1,600 mm Rotor knives: 4 pcs Stator knife: 1 pc, externally adjustable Infeed unit: 2 x 5 rollers Dodpfx Asgabfbskzskp Motor: 250-500 kW Machine weight: approx. 30,000 kg

Condition: new, Year of construction: 2024, Genie GS4655 E-Drive scissor lift, new, used, demonstration machines available Dkjdpfx Akerhktpjzop

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Dkedpfx Aotgvgpekzop Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: new, FILTER SYSTEM DE-55 400V Technical Specifications: Speed: 2850 Power supply: 400V 50Hz (optional) Fan power: 5.5 kW Airflow: 6400 m3/h Internal dimensions (L x H x W in mm): 1140x2250x730 Dksdpog Rbz Ijfx Akzop Weight in kg: 199 kg THE OFFER INCLUDES: Filter system DE-55 400V (optional) CE Declaration of Conformity 24-month warranty for consumers 24-month warranty for businesses Professional service after the warranty period