Used Bumex Sp. Z O.o. Powder Coating Oven On Gas 1500X5000X200 for sale (39,843)

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. Gbsdpfjfz Dt Nex Ap Dsu In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Gbjdefz Dubjpfx Ap Dsu Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators. Godjfz I Edjpfx Ap Dobu

Condition: used, -Model: Compact -Dimensions: 1980x1780x2550mm -Trolley: 80x80cm -Capacity: 144 to 180 Baguettes -PN: 6775910 -Gas Burner -Trolleys not included Gbodpfx Ajwtg Nlsp Dou -Voltage: 230 - 400V -Power: 6 kW -Frequency: 50 Hz -Sold with Gas Burner

Year of construction: 2022, condition: new, functionality: fully functional, Completely new machine, packed. Did not suit our room since it is not installable two ways. Bought from KATOMSK AS Gbodpfsyrb Swjx Ap Deu

Condition: new, Year of construction: 2026, 25T Premium Ramp, Usable Inner Width 2m – TM-GROUP, the Best Choice on the Market ⭐️ Galvanized Drive-On Grating! ⭐️ ✅ Specifications: - Manufacturer: TM-GROUP - Maximum Load Capacity: 25 tons - Ramp Inner Width: 2000 mm - Electric and Manual Height Adjustment: 1m – 1.6m - Galvanized Drive-On Grating - Reinforced Side Railings - Solid Rubber Transport Wheels - Central Forklift Hook for Easy Relocation - Adjustable Ramp Slope and Flap Height - Double-Sided Reinforced Supports - Movable Parts Equipped with Grease Nipples - Ramp Also Equipped with a Winch ✅ Drive-On Grating: Galvanized anti-slip grating with grooves. Provides a safe and secure surface. Forklifts and foot traffic benefit from maximum traction and stability. Competitors usually offer ramps with a sheet metal platform covered by mesh. Our product features the grooved grating, which is far more durable and allows dirt from forklift wheels to fall through, preventing slippage and buildup. ✅ Forklift Hook – Can Be Installed on Either Side: Convenient and quick forklift mounting allows for movement in all directions. The specially designed hook enables easy maneuvering even in tight spaces. ✅ Connecting Chain for TIR, Railway Wagon or Stationary Dock: A robust steel chain adds extra safety, preventing ramp movement during loading operations. ✅ Durable Side Railings: Protective railings with detachable options for installing a frame or canopy (canopy is optional). ✅ Electric Height Adjustment: Smooth electro-hydraulic lift powered by a high-grade pump. Requires only 230V – can be operated from a standard socket. ✅ Dual-Action Manual Pump: A hydraulic pump for height adjustment when power supply is unavailable – enables lifting from both directions. Ideal for all working conditions. ⭐️ Available Variants Include: ⭐️ Drive-on width: 1700 mm, 2000 mm, and 2500 mm – available in Standard, Premium, and Premium Plus. Load capacities: 10 tons, 15 tons, 20 tons, and 25 tons. Grating thickness: 3–5 cm. Colors: red, blue, black, and green (custom colors available upon request). Mobile ramps available with tarpaulin cover. As a manufacturer, we also offer custom-made ramps tailored to your specifications – in any dimensions, load capacity, or variant. Looking for a personalized solution you can’t find anywhere else? Contact our specialist today. Gedpfx Apowbg Hgs Djbu Tags: Loading ramp, unloading ramp, loading dock, mobile ramp, dock ramp, mobile loading ramp, mobile unloading ramp.

Condition: used, -Model: NG 144 -Capacity: 90 to 252 baguettes -Trolley dimensions: 600x800 mm -Dimensions (LxWxH): 1500x1560x2200 mm -Year: 2000 -Serial No.: 144NGA035 -High-grade top hanging hook -Power: 2 kW -Heating capacity: 90 kW -Voltage: 400 V Gbodpfowxl H Hex Ap Dju -Weight: 1,320 kg -Suitable for baking bread, pastry, and viennoiserie -Burner: C10 gas -Insulated with rock wool panels -Double glazed 8 mm, tempered 'Securit' glass -400 mm stainless steel access ramp Lrey Tdewxl H Hoxugsr -Equipped with steam evacuation valves -Fully stainless steel refractory heat exchanger -2 steam units for optimal distribution over the products -4 heat distribution turbines for improved baking -Front, hood, and extractor made of stainless steel -Stainless steel sheathed heating elements -High-temperature resistant silicone electric wiring harnesses.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). Gjdefz I D Dspfx Ap Dsbu - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2026, condition: new, functionality: fully functional, Wood/gas-fired pizza oven with rotating stone, Ø150 cm: MARANA FORNI RotoForno SUeGIU series – RAL 130 brushed Mixed wood/gas fuel MARANA Forni gas system Capacity: 18 pizzas Ø290 or 13 pizzas Ø330 mm Cooking surface Ø1500 mm Rotating and liftable SUeGIU stone Micro-perforated stone surface High-density refractory stone Stone density: 3200 kg/m³ Thermal recovery: 40 to 100 °C Dome cladding RAL 130 brushed included RAL color to be specified Smooth black granite finish included Mouth width: 600 mm Stone height: 1200 mm Smoke outlet: Ø200 mm Gsdpfezt Rhcex Ap Debu Right (DX) or left (SX) opening Thermostat with 5 flame levels Removable C-shaped door included C-shaped door used during heating Backup Patch console included Rotation maintained via Patch console Front support cover panels included Dimensions vary by approximately ±2% Dimensions: 2200 x 2200 x 2050 mm Weight: 2170 kg

Condition: used, -Deck: 2.20 m -Width: 1.50 m -Number of doors: 6 -Brand: Bongard -Energy: Gas / Fuel oil Gsdpfxey Icg Nj Ap Djbu -Overhauled equipment: The equipment is prepared upon order; collection and return deadlines are agreed at that time (please request the price after overhaul)

Condition: new, Year of construction: 2026, Yanigav Log Splitter FBH 210 / FBH210G / FBH210 E • Weight: 470kg / 550kg / 700kg • Dimensions (LxWxH): depending on model and trolley length (1.51m; 1.81m; 2.11m) • Force: 15t / 19t / 7.5kW • Drive: PTO hub drive / hydraulic pump / three-phase electric motor • Log length: 121-211cm • Wedge length: 260mm Gjdpfx Aer D Nhqop Debu Price: €5,600 / €7,500 / €10,000

Condition: used, - Dimensions: 1970x2150x2730 mm - 2 racks: 800x600 mm - Serial number: 3002245 - Model: LR1-812H - Year: 01/2017 - Baguette capacity: minimum 360 - Baking surface: 19.2 m² - TOUCHMATIC touchscreen control panel - Voltage: 400V - Power: 5 kW Ndsy Tdjw Enwzjxugsa - Burner: Gas - Maximum baking surface with minimal footprint, compact and robust construction - Significant increase in productivity - The right choice for a wide range of requirements - The impressive dimensions of HEINLUXROTOR rotary ovens (baking surface relative to floor space) are made possible by the integration of the burner in the upper section and an optimized airflow design. Gbodpfxsw Enwzs Ap Dou

Condition: used, - Type: Professional deck oven - 5 decks × 3 chambers - 15 openings - Energy source: Triple fuel – gas/wood/diesel - Heating system: Annular tubes for uniform heat distribution - Usable depth: 2,200 mm - Condition: Almost new, used only for commissioning and ignition tests - Previous use: No commercial production, only technical tests - Structure: Full stainless steel, durable and easy to maintain - Cooking type: Stone hearth - Controls: Manual adjustment Gbjdpfx Apezhk Rms Dou - Operating temperature: Up to 300°C - Insulation: High density, limiting heat loss and consumption - Overall dimensions: Large structure suitable for production workshops - Production capacity: Ideal for high-volume baking (bread, pizza, pastries, etc.) - Overall condition: Excellent

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: Gsdpfxjwzl Hxe Ap Dobu The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Heidenhain MC 7222 15 inch/XGA SP 007 0025 display, ID: 806868-01, Serial No.: 39933445, unused in original packaging, 100% functional, scope of delivery as shown in the photos. Gedpfx Aez H Higop Djbu

Condition: new, Year of construction: 2026, 10T Ramp, Usable Internal Width 1.7m – TM-GROUP, the Best Choice on the Market ✅ Specifications: - Manufacturer: TM-GROUP - Maximum Load Capacity: 10 tons - Internal Ramp Width: 1700 cm - Reinforced side railings on both sides - Ramp rollers for easy movement - Central ramp handle for forklift repositioning - Adjustable slope and flap height - Dual reinforced ramp supports - Moving parts equipped with grease fittings - Ramp also equipped with a winch - ELECTRIC and manual ramp height control ✅ Ramp Surface Grating: Grating with anti-slip grooves. Safe and secure surface. Both forklifts and pedestrian movement enjoy the best possible grip and solid support. Competitors typically offer ramps with a metal sheet covered with mesh. Our product features grooved grating – a much more durable solution that prevents dirt from staying on the ramp and ensures the forklift doesn't slip. ✅ Forklift Mount – Installable on Both Sides: Convenient and quick forklift attachment allows for ramp transport in all directions. The specially designed handle enables maneuvering the ramp even in tight spaces. ✅ Chain for Connecting to TIR Truck, Railway Car, or Fixed Warehouse Dock: A solid steel chain is another strength of our ramp, providing additional safety by preventing the ramp from shifting during loading operations. ✅ Sturdy Side Railings: Safety railing with the option to detach and install a frame/roof structure (roof is optional). ✅ Electric Height Adjustment Control: Smooth electro-hydraulic drive powered by a high-end pump. The pump requires only 230V, making it usable with a standard power outlet. ✅ Dual-Action Manual Pump: Hydraulic pump for height adjustment in case electro-hydraulic power is unavailable – dual lifting mechanism. This is an ideal solution for working in all conditions. ⭐️ We Offer the Following Variants: ⭐️ Driveway widths: 1700 cm, 2000 cm, and 2500 cm – Standard, Premium, and Premium Plus. Mobile ramps with load capacities of 10 tons, 15 tons, 20 tons, and 25 tons. Ramp grating thickness: 3–5 cm. Colors: red, blue, black, and green (custom colors available on request) Mobile ramp with tarpaulin cover. Gjdpjwa Nr Nsfx Ap Dsbu As a manufacturer, we can produce ramps tailored to special, individual orders – in different sizes, load capacities, and configurations. Need a custom solution you can’t find anywhere else? Contact our specialist. Tags: Loading ramp, unloading ramp, loading dock, mobile ramp, loading bay, transfer dock, mobile loading dock, mobile loading ramp.

Condition: new, Year of construction: 2026, overall weight: 2,900 kg, We offer the RS-8F double-shaft shredder manufactured by RS TeamTech - Recycling Solutions Designed to shred a wide range of materials. The RS8 models have a shaft working length of 600 mm and are identical in design to the RS800 and RS1200 models. Parameters: Working surface: - 600x580 mm (other sizes possible) Number of knives on the dial: 1-12 Disc thickness: 10-100mm Starting material size: 20-100 Engine power: 2X22kW WEIGHT: 2900 kg We produce personalized shredders for individual orders. Godpfx Apspk D Nrs Dsbu They can be integrated into recycling lines. They are equipped with a Siemens controller that protects the device against overload and has additional protection for the motors. Each device is equipped with an inverter that allows for soft start-up and controls the operation of the engines. Additionally, our experienced technicians are available 24/7. The satisfaction of our customers confirms the high quality of our products. We provide recommendations upon request. Polish production.

Condition: used, Bongard MG Range Gas or oil-fired, depending on configuration Heating power: 110 kW Gas connection: 3/4" galvanized pipe Trolley: 800 × 1000 mm Trolley: 780 × 980 mm Maximum load: 200 kg 180 to 216 baguettes (250 g each) 18 levels for baguettes 108 to 135 loaves (400 g each) 15 levels for loaves Stainless steel baking chamber Rotating tray Pulsed steam injection Maximum temperature: 280 °C Power supply: 3N~400 V Electrical protection: 16 A Water pressure: 2.5 to 4 bar Water connection: 3/8" or 12/14 mm pipe Oil connection: 10/12 mm copper pipe Smoke exhaust: Ø 200 mm Dimensions: 2251 × 2062 × 2492 mm Depth with door open: 2774 mm Minimum door opening: 1020 mm Net weight: 1830 kg Key advantages Capacity of 180 to 216 baguettes (250 g each) Gbedpfx Aezyafdsp Dju Production of 108 to 135 loaves (400 g each) Rotating trolley loaded up to 200 kg Baking chamber entirely made of stainless steel Adjustable blowing vents Two valves for programmable steam evacuation Retractable and removable ramp for loading Front access to the burner and technical components Reinforced door with double-glazed, ventilated glass, removable

Condition: used, functionality: unexamined, Bottled water production line for PET bottles in the following formats: 0.5 L, 1.5 L, and 2.0 L. Line output: approx. 16,000 bph The line includes the following machines: 1) KHS triblock bottling machine, filler type 45-80-10, year 1998 (approx. 20,000 bph), control: S7-200 - KHS bottle washer, Innoclean FR-EM 45 - KHS filler, Innofill EV 80 - ALCOA KUPI 10/540 capper (max. 25,000 bph) Godpfx Aewv Trlop Dsbu 2) KRONES Contiroll 745 labeller, year 2000 (16,000 bph), control: S7-300 3) Shrink packer with tunnel – ZVT PSP 032 S, year 1998 4) Bottle liquid level inspection device – METEC Promecon 2000 5) Set of KHS Innoline slat conveyors – several dozen linear metres, including curves and dividers The machines are used, regularly serviced, and require a technical inspection before recommissioning. Currently dismantled and stored in containers, ready for transport. The line is prepared for reassembly – each element is marked with a unique identification number.

Condition: used, - Trolley dimensions: 600 x 800 mm - Electromechanical control panel - Bongard 8.62 gas oven - Capacity: 144 to 180 baguettes - Supplied with gas burner Optimize Your Production with a Professionally Refurbished Oven, Ready for Use! - Trolley Dimensions: 600 x 800 mm – Compatible with standard bakery trolleys for easy handling. - Electromechanical Control Panel: Simple and intuitive for precise baking control. Production Capacity: Gbsdpfx Aeyhqd Iop Dou - 180 baguettes of 250g on 19 baking levels – Maximize your bread production with a capacity suited for high-volume bakeries. - Supplied with Gas Burner: Versatile gas-powered oven, providing even and efficient baking. Why Choose the Bongard 8.62 Oven for Your Bakery? This professional oven is designed to meet the demands of modern bakeries, whether artisan or industrial. With high capacity and proven reliability, it ensures consistent baking results for superior quality bread. Dsdcusyhqd Io Ti Enjkh Don’t miss this opportunity to upgrade your bakery with a pre-owned Bongard oven. Contact us now for more information and to receive a tailored offer to meet your needs.

Condition: new, Year of construction: 2026, power: 300 kW (407.89 HP), Ball Mill for Mining & Fine Powder Making: A ball mill is a fundamental grinding device widely used in mining, metallurgy, cement, and chemical industries. It is designed to grind ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, while in powder-making industries, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on the principle of impact and friction. As the cylindrical shell rotates around its horizontal axis, the grinding media—usually steel or ceramic balls—are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion breaks down the material into fine particles. The process can be carried out in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Ensures uniform material input through a feeder or screw conveyor. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel or ceramic balls of various diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details/Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Gbsdoq Ngafjpfx Ap Deu Dry grinding: Used for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining and Powder Production In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. In fine powder production, ball mills are used to produce materials such as silicate, ceramic powder, refractory materials, and chemical raw materials. The uniform particle size achieved by ball milling enhances product quality and performance in downstream applications. Conclusion A ball mill is an indispensable piece of equipment for both mining and fine powder making. Its ability to grind materials into fine, uniform particles makes it vital for ore beneficiation and industrial powder production. With flexible configurations, high efficiency, and reliable operation, modern ball mills provide a cost-effective and energy-efficient solution for large-scale grinding, ensuring consistent quality and productivity across diverse applications.

Condition: new, Year of construction: 2026, Hopper capacity: 40 [kg] Performance: Up to 140 [onions/min] Gbedpfx Aed Nimaop Dou Raw material size: 45 – 140 [mm] Overall width of the machine: 1050 [mm] Overall height of the machine: 1880 [mm] Overall length of the machine: 4830 [mm] Number of working paths: 2 Onion loading height: 1000 [mm] Onion discharge height: 700 [mm] Waste discharge height: 400 [mm] Power supply: 3 x 400 [V] / 50 [Hz] Installed power: 1.2 [kW] Compressed air connection: 8-10 [bar] Air consumption: 1.9 [m3/min] Noise level: Above 80 [dB] Material of the structure: Stainless steel and plastics approved for food contact CE certificate: Yes Topping cutter: No

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. Gsdpfx Apsfz Nb Te Debu - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: new, Year of construction: 2026, ⭐️ CAPACITY FROM 1 TON TO 100 TONS ⭐️ ⭐️ DIMENSIONS – CUSTOM SIZE AGREED WITH THE CLIENT ⭐️ ✅ Overhead crane, commonly called a bridge crane, eot crane, is a type of crane found in industrial environments. An overhead crane consists of parallel runways with a traveling bridge spanning the gap. A hoist, the lifting component of a crane, travels along the bridge. Gsdewr A Alopfx Ap Djbu ✅ Usually there are include many kinds of types crane, firstly it was divided into single girder and double girder overhead crane. There are included normal type, european type, magnetic crane, grab crane, explosion proof crane, and so on. ✅ According to the different using environment and different application. We will choose the most suitable crane for customer

Condition: new, Year of construction: 2026, ⭐️ CAPACITY FROM 500 KG TO 10 TONS ⭐️ ⭐️ DIMENSIONS – custom production in any size ⭐️ ✅ Used with chain hoist or wire rope hoist. ✅ Fixed on the concrete foundation by anchor bolts ✅ Simple structure, convenient operation, small occupation space and large working range. ✅ Ideal lifting equipment for enterprises to improve efficiency and improve working conditions. ✅ Can replace bridge cranes and gantry cranes in many occasions, with low investment and high efficiency Gbedpfx Ajwr Artjp Dju