Used Cascade 52G-Cfr-461 for sale (295)

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, machine/vehicle number: REFLEX 36290, This is a fully functional machine that will be ready for delivery in December 2025. It includes a loading table - it has dimensions of 6000 * 2500 mm. The length of the chamber is 6000 mm. The expected status as of December 31, 2025 will be approximately 8,800 hours. The machine is located at: U Panelárny 461, Předměřice nad Labem. Hfedpfewhnbfex Aflsk

Condition: excellent (used), Weiss Temperature Shock Test Chamber Here we offer a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Water-Cooled Specification: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hodpjzp D Diefx Afljfk Hot/cold chamber switching time: 10 sec. Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Temperature Shock Test Chamber Here we offer a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Water-Cooled Specifications: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Switching time, hot/cold chamber: 10 s Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without... approx. 1820 mm, with... approx. 1850 mm Depth (without and with test chamber door): without... approx. 900 mm, with... approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Hodpjzp D A Sefx Aflsfk Connection values: 3/N/PE/AC 400V ±10% 50Hz /18.7 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a temperature shock testing chamber. Weiss temperature shock testing chamber, air-cooled Specification: Temperature range, warm chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Changeover time, warm/cold chamber: 10 s Temperature stability: ±1 K Dimensions and other data: External dimensions: height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lifting platform (test chamber): height 450 mm, width 500 mm, depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Hjdpfx Aozp D A Ejflefk Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz /14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Year of construction: 2008, condition: used, functionality: fully functional, Function : Stage 1 is a heated degreasing and phosphating stage. The stage has an external heat exchanger. Water, to compensate for evaporation and adhesion losses, is supplied from stage 2 through a separate circulation pump. An electronic level controller maintains a constant level of the liquid. Pump types 2 x W80 - 11 kW Total pump capacity 4.300 l/min – 18 MVS/ 22 kW Circulation pump 1 x W35 – 2,2 kW Total pump capacity 380 l/min – 10MVS/ 1,96 kW Heat exchanger gas max. 250 kW Spray pressure 1 – 1,5 bar Stage 2 is an unheated rinsing stage with water supply from stage 3. The water is supplied through a separate circulation pump. The stage has overflow to the drain. Pump type W80 – 11 kW Total pump capacity 2.150 l/min – 18 MVS/ 11 kW Spray pressure 1 – 1,5 bar Stage 3 is an unheated fine rinsing stage with demineralised water from the reverse osmosis plant. The demineralised water is supplied direct from the osmosis plant. An electronic level controller maintains a constant level of the liquid. Pump type W80 – 11 kW Total pump capacity 2.150 l/min – 18 MVS/ 11 kW Spray pressure 1 – 1,5 bar Hsdpfjzpxwdjx Aflefk Stage 4 is a final fine osmosis rinse direct from the osmosis plant. The plant has cascade rinse technique with automatic level supervision for reducing the wastewater to a minimum. Maintenance and service friendly construction, all electrical elements are accessible from outside.

Year of construction: 2008, condition: ready for operation (used), A vertical injection moulding machine from ARBURG is offered. Clamping force: 50t, table size X/Y: 500mm/420mm, max. shot volume: 65cm³, min. opening width: 272mm (172mm), max. opening width: 522mm (422mm), hydraulic/pneumatic cascades: 2/4, hydraulic/pneumatic core pulls: 0/0, hydraulic operating hours: 6979h, automatic operating hours: 4696h, total cycles: 142609. Including shuttle table. Documentation available. Inspection possible by arrangement. Hsdpfxezta D Ho Aflofk

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, External Dimensions (W x D x H)1730 x 765 x 1010 mm Internal Dimensions (W x D x H)760 x 495 x 615 mm Volume 231 litres Net Weight 318 kg Capacity (Aluminium Racks 2” Boxes) - Capacity (Stainless Steel Racks 2” Boxes) - Cooling Performance -150 °C Temperature Setting Range -125 ~ -152 °C Temperature Control Range -130 ~ -150 °C Controller Microprocessor, non-volatile memory Display LED Temperature Sensor Pt-1000 Refrigeration System Cascade with auto-cascade low-stage Compressors 1100 W Refrigerant HFC Insulation Material PUF / VIP Plus Insulation Thickness 135 mm Exterior Material Painted steel Interior Material Aluminium Outer Doors/Lid - Outer Door Lock Y Inner Doors/Lid 2 Shelves - Max. Load - Per Shelf - Max. Load - Total 207 kg Vacuum Release Port - Hfsdpjzb Rkusfx Aflsk Access Port 1 Access Port Position left Access Port Diameter 40 Casters 6 (3 leveling feet) Power Failure V-B-R High Temperature V-B-R Low Temperature V-B-R Filter V-B Door Open V-B Power Supply 230 V Frequency 50 Hz Noise Level51 dB [A] Good working condition. Please check out our other listings as well.

Condition: used, machine/vehicle number: EFU09D60002, Year of construction: 2018, operating hours: 2,368 h, load capacity: 3,500 kg, lifting height: 4,000 mm, free lift: 100 mm, mast type: simplex, construction height: 2,755 mm, fork carriage width: 1,000 mm, fork length: 1,200 mm, empty load weight: 5,591 kg, total length: 2,558 mm, drive type: Elektro, construction width: 1,190 mm, Electric 4-wheel forklift truck Chassis number: EFU09D60002 Load center: 50 Fork width: 125 mm Hfedpfxoqb Rdhs Aflok Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Technical condition: Very good Front tires type: Superelastic Front tires Size: 23x10-12 Rear tires Type: Superelastic Rear tires size: 18x7-8 Battery Volt: 80V Battery Ah: 775Ah Battery manufacturer: Hawker Battery year of construction: 2019 Battery condition: 80 - 100% Description: Device is optically and technically refurbished. Maintenance incl. drive oil renewed. UVV test renewed. Sideshifter, Sideshift CASCADE front attachment. Other attachments such as fork positioners or rotator optionally available at extra cost. 3rd valve, rear work lights, front work lights, CE certificate, safety light, fingertip control, reversing alarm

Condition: used, Year of construction: 2006, FIAC CRS20 Soundproof Screw Compressor – Year 2006 Complete with a 500-litre air receiver and FIAC DS20/AC refrigerated air dryer, ideal for ensuring a continuous supply of compressed air with low noise levels. Technical Specifications Air delivery (F.A.D.): 1,860 l/min Maximum pressure: 10 bar Power consumption: 17.6 kW Motor power: 20 HP Hfsdpfx Ajzq Amroflok Air receiver capacity: 500 litres Weight: 461 kg Availability: Delivery scheduled for September 2026.

Condition: excellent (used), CTS Type: C-70/600 CTS C-70/600 Climate Test Chamber Air-cooled version With observation window, test specimen protection, and documentation For sale is a high-quality CTS climate test chamber, type C-70/600, for precise temperature and climate testing in research, development, quality assurance, and industry. Technical data: Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Rated power: 8.7 kW Rated current: 14.8 A Protection class: IP 22 Refrigerant: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment / Features: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Test specimen protection / temperature limiter Water connection / demineralized water supply Test chamber and condensate drain Pipe penetrations on the side of the test chamber RS232 interface as per documentation Digital outputs for test specimen control Test chamber dimensions as per documentation: approx. 850 x 850 x 830 mm Hfjdpfx Afszmq Tleljk External dimensions as per documentation: approx. 1900 x 1115 x 1850 mm Weight as per documentation: approx. 600 kg Scope of delivery: CTS climate test chamber C-70/600 including existing documentation / operating manuals Scope of delivery as shown in the pictures The device can be inspected by appointment. Loading with a forklift can be arranged. Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, lifting height: 17,300 mm, Year of construction: 2021, operating hours: 461 h, Empty weight: 2.820 kg Lifting capacity: 3.200 kg Dimensions of cargo space: 351 x 77 x 196 cm Delivery terms: EXW Production country: IT Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Hfjdpfx Afszncfpjlek Jekko SPX 532 CL2 * 2021 * Lithium battery drive * 461 operating hours * 17.3 meters working height * 14.8 meters horizontal reach * 3200 kg lifting capacity * Remote Control * Automatic outrigger * Jib 1000.2HL.1MX * Jib 1200GX * Total weight 2820 kg * Including documents

Condition: used, This listing is for 1 of 2 Spectramax M2 Microplate readers These units are in full working condition and is ready for immediate use Overview The SpectraMax M2 (and enhanced M2e) from Molecular Devices is a high-performance multi-mode microplate reader designed for flexible detection in life science applications. It combines absorbance, fluorescence, and optional luminescence in a compact benchtop instrument ideal for ELISA, DNA/protein quantification, enzyme kinetics, and cell-based assays. Key Features Multi-detection capability: Supports absorbance, fluorescence (top-read), and with the M2e, adds bottom-read fluorescence, luminescence, and time-resolved fluorescence (TRF). Top- and bottom-read fluorescence: Bottom-read only on the M2e for enhanced cell-based assay sensitivity. Dual-mode cuvette port: Enables standard spectrophotometry outside of microplate format. Dual monochromators: Selectable excitation and emission wavelengths (1 nm increments) without the need for filters. PathCheck® Technology: Automatically normalizes optical pathlengths for absorbance, ensuring accurate, cuvette-equivalent readings. Well volume sensor: Prevents errors from low-volume or uneven well filling. Instrument and software validation: Compatible with SoftMax® Pro software for data analysis and 21 CFR Part 11 compliance, supporting regulated lab environments. Robot compatible: Integration-ready with automation systems and plate stackers for high-throughput workflows. Typical Applications Hfodpfxsxhfzye Aflok ELISA DNA/RNA/Protein quantification Enzyme kinetics Cell viability and cytotoxicity (M2e preferred) FRET and TR-FRET Luminescence assays (M2e) Low-volume or cuvette-based protocols

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, only a few operating hours Equipment and technical data: Stationary clean-air filter system ECO JET DUO 6 XL ZRS for extracting wood dust and chips Fans: 2 × 7.5 kWAir volume: 10,000 m³/hNegative pressure: 2,700 Pa (total) / 2,200 Pa (static)80 filters à 2.50 m, BIA Category M, electrically conductive, incl. support cagesFilter area: 77.6 m²Filter surface loading: 129 m³/(m² × h)Filter cleaning: AL-KO OPTI-JET®Pressure relief area: 0.84 m² (bursting discs)Base frame with discharge hopper and rotary valve; dry discharge with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm intermediate section for increasing unit height with 2 suction openings Base frame with discharge hopper and ZRS 960/1 FG rotary valve for chip disposal via on-site transport fan into an existing silo or similar; DN 200 transport pipe, approx. 1,260 mm, connection on site ZRS 960/1 FG Rotary valve: ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (indoor/outdoor); EX D; FSA 11 ATEX 1614XMotor: 0.18 kW / 0.78 A, 3 Ph / 400 V / 50 HzProtection class: IP 54 / B3; Insulation class FSpeed: 41 rpm; Capacity: 15,744 l/h*; 7 cellsInlet/outlet: 960 × 250 / 960 × 208 mmDimensions: 1,100 × 605 × 330 mm; Temperature range: up to 50 °C Further equipment: 400 mm suction connection with non-return flap in rectangular ductECO JET backflow flap 910 × 346 × 500 mm AL-KO Control System ACS II: Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage and integrated frequency inverter for cascade control of 2 fans up to 37 kW Plain-text fault display with common fault lamp; manual discharge start via display button; manual cleaning start via push button; cleaning via differential pressure; post-cleaning; external start via potential-free contact; operating hours counter; maintenance interval display; control cabinet lighting and ventilation; monitoring of fire damper, residual dust sensor, level sensor and max. filter pressure 10 individually controlled solenoid valves 4-group slide control for up to 8 machines: control via potential-free contact (PFK) or induction coil; 24 V DC motorised or electro-pneumatic slide gates; max. 4 panels per conveying line Hfsdpfx Aszlbqrjflsk Power section ZRS up to 0.18 kW; time settings adjustable via touchscreen Bursting disc sensor and evaluation unit; pressure transmitter for inverter; pressure switches; warning beacon; 2 × PTC monitoring; rotary valve speed monitoring Exhaust/return air changeover 24 V DC for summer/winter operation Filter monitor/residual dust monitoring with evaluation unit according to DIN EN 12779 and H3: if 0.3 mg/m³ is exceeded, a self-latching alarm is triggered and the recirculation air damper automatically switches to exhaust air 10-way terminal box 24 V/230 V, fully wired for filter cleaning, incl. approx. 6 m cable Pipe system incl. bends, branches, reducers, PU hoses, machine connections, small parts and EP slide gates for extraction of 11 woodworking machines + 1 HRS according to specification Return air according to TRGS 553 with changeover damper and fire damper Galvanised base frame for container loading Paddle switch 24 V–230 V with socket for level indication in the discharge hopper Dimensions: 2,092 × 2,000 × 5,292 mm Inspection possible in assembled condition in 06667 Weißenfels. Price incl. dismantling. Availability: Short notice Location: ...

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total length: 44,860 mm, total height: 5,250 mm, total width: 17,100 mm, type of input current: three-phase, workpiece weight (max.): 80 kg, input frequency: 50 Hz, heating capacity: 350 kW (475.87 HP), compressed air connection: 8 bar, workpiece height (max.): 2,000 mm, workpiece length (max.): 800 mm, clearance between the columns: 3,000 mm, fuel: domestic gas H, insulation material: PUR, insulation thickness: 80 mm, workpiece width (max.): 800 mm, Equipment: cabin, lighting, For sale: application section of a powder coating plant from 2021. Application technology: NORDSON ENCORE HD, charging cascades with voltage up to 100 kV, control system POWDER PILOT, feed center SPECTRUM HD II, ENCORE HD spray guns (16 units) + 2 manual guns, HDLV type pump (18 units). Hodswhbnlopfx Afljfk

Year of construction: 2023, operating hours: 5 h, condition: as good as new (ex-display), functionality: fully functional, rotor diameter: 420 mm, rotor width: 800 mm, Genox GC800T Series - High Performance Granulator suitable for processing various materials including plastics, wood, rubber etc. 37kW Drive Motor with outboard rotor bearings, heavy duty precision machines rotor, and 580rpm operating speed as standard. 800mm wide x 420mm diameter cutting chamber with heavy duty, high inertia Cascade Rotor with 24 x rotor knives. Two rows of counter knives are mounted in the chamber. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hfsdpszudnxjfx Aflek An electric assisted chamber opening with actuator with integrated safety interlocks and a setting jig is for pre-setting of knives off the machine are provided to enable quick, easy knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. This machine is as new and in stock at our warehouse in the UK and has only been used previously for exhibition displays. Significant saving available over a newly built machine machine.

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 1,200 mm, Genox GXC1200 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 75kW Drive Motor with outboard rotor bearings (90kW & 110kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. Hjdpozudnrofx Afljfk 1,200mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: new, Year of construction: 2026, functionality: fully functional, nominal power: 55 kW (74.78 HP), rotor diameter: 520 mm, rotor width: 1,000 mm, Genox GXC1000 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 75kW Drive Motor with outboard rotor bearings (90kW, 110kW & 132kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1000mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 50 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. Hfedpfx Afjzudnfoljk All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,200 mm, Genox GXC1200T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. Hfodpszudmzofx Aflek 90kW Drive Motor with outboard rotor bearings (110kW & 132kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 1,200mm wide x 660mm diameter cutting chamber with a choice of either a 10 knife/5 row or 14 knife/7 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 800 mm, Genox GXC800 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 55kW Drive Motor with outboard rotor bearings (75kW & 90kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 800mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 40 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. Hodpfx Aszudmnsfljfk We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: excellent (used), Year of construction: 2004, ENGEL DUO 11050/2300 Injection Molding Machine Manufacturer: ENGEL Model: DUO 11050/2300 Hfedpfx Ajzkatcjflsk Year of manufacture: 2004 Operating hours: 70,029 h Type: Hydraulic injection molding machine Category: Large-size injection molding machine Clamping force: 23,000 kN / 2300 tons Clamping Unit Clamping force: 23,000 kN Dimensions of mold mounting plates: 2900 x 2500 mm Distance between columns: 2000 x 1600 mm Minimum mold height: 700 mm Maximum mold height: 1890 mm Maximum opening width: 3800 mm Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm3 Injection weight (PS): 8071 g Injection pressure: 1600 bar Additional equipment according to available data Number of hydraulic cores: 2 Number of mold heating zones: 36 Number of hydraulic cascades: 10 Magnetic platens Mold tilting option Screw replaced in 2011 Screw reinforced for special materials Machine without robot Dimensions and weight Weight of the main unit: 113 t Weight of the control cabinet / additional components: 18 t Approximate total weight: 131 t

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) Hsdpfx Afjyw Aa Uslsfk 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: excellent (used), Year of construction: 2011, ENGEL DUO 5550/650 pico injection molding machine ENGEL robot Control system: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Technical data Hjdpfx Aoywrtwoflsfk Clamping unit Clamping force: 6500 kN (650 tons) Distance between columns (H × V): 1100 × 960 mm Platen dimensions (H × V): 1510 × 1440 mm Mold height (min./max.): 650 / 1150 mm Mold opening stroke: 1400 mm Maximum distance between platens: 2050 mm Maximum mold weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Injection unit Screw diameter: 90 mm Maximum injection volume: 2740 cm³ Maximum injection weight (PS): 2520 g Maximum injection pressure: 2180 bar Standard injection pressure: 1910 bar Screw L/D ratio: 20:1 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plastication rate: 77 g/s Nozzle clamping force: 150 kN Drive and power supply Drive power: 90 kW Cylinder heater power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1000 l Hydraulic equipment 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the stationary platen 4 cascade valves on the stationary platen ENGEL robot ENGEL linear robot Integrated with the machine control system Designed for automatic part removal Robot control from the CC200 system Synchronization of robot operation with the injection molding machine cycle

Condition: like new (used), Year of construction: 2019, operating hours: 400 h, clamping force: 1,000 kN, screw diameter: 32 mm, displacement volume: 103 cm³, injection pressure: 2,200 bar, mold height (min.): 150 mm, ejector force: 25,000 N, ejector stroke: 100 mm, opening stroke: 350 mm, number of injections: 1, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S100iA – like-new, fully electric precision injection molding machine, manufactured in 2019, with only 400 operating hours. Your advantages: • 1,000 kN clamping force • FANUC 31i-B CNC control with a 15-inch touchscreen • 32 mm screw and 103 cm³ injection volume • Injection speed up to 200 mm/s, maximum 2,200 bar • Hardened W/C plasticizing unit – for temperatures up to 350 °C and up to 30 % glass fiber • Euromap 67 robot interface Tool space and clamping unit: • Plate dimensions 660 × 610 mm • Tie bar spacing 460 × 410 mm • Mold height 150–620 mm, extended version • Opening stroke 350 mm Hfsdezrikmjpfx Aflok • Ejector stroke 100 mm, ejector force 25 kN Equipment includes, among other things: AI pressure and dosing control, tool and ejector protection, backflow monitoring, automatic tool height adjustment, energy consumption measurement, four-circuit flow meter, hopper slide, three-color LED signal light, three air valves, and cascade control for up to eight needle gate valves. Hungarian operating manual and warning instructions are available. A robot is not included in the scope of supply. Inspection by appointment. Further technical documents and the offer are available upon request.

Condition: used, DIBAS 64S and 64L Technical specifications 64S Capacity: 4/5 trays 600 x 400 mm Tray distance: 100 / 80 mm Dimensions (automatic door): 930 x 1010 x 700 mm Dimensions (manual door): 930 x 1055 x 700 mm Voltage: 400 V 3N/PE Frequency: 50 Hz Current: 13.9 A Power: 9.6 kW Weight: 136 / 143 kg (cascade passive) Hfedpfx Afjy Avpmelek Weight: 134 / 141 kg (cascade active) Weight: 119 / 126 kg (pipe steaming) Steam type: cascade (optional), pipe steaming (standard/optional) Water pressure: 150 – 600 kPa Technical specifications 64L Capacity: 8/10 trays 600 x 400 mm Tray distance: 100 / 80 mm Dimensions (automatic door): 930 x 1010 x 1100 mm Dimensions (manual door): 930 x 1055 x 1100 mm Voltage: 400 V 3N/PE Frequency: 50 Hz Current: 27.5 A Power: 19 kW Weight: 205 / 212 kg (cascade passive) Weight: 200 / 207 kg (cascade active) Weight: 170 / 177 kg (pipe steaming) Steam type: cascade (optional), pipe steaming (standard/optional) Water pressure: 150 – 600 kPa

Condition: ready for operation (used), Year of construction: 2002, clamping force: 40,000 kN, screw diameter: 135 mm, injection weight: 7,837 g, controller manufacturer: KRAUSS MAFFEI, Hydraulic injection moulding machine manufactured in 2002. This Krauss Maffei 4000-24500 MC features a clamping force of 40,000 kN and an injection volume of 10,735 cm³. The machine is equipped with a screw diameter of 135 mm and a maximum opening width of 4,200 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 4000-24500 MC machine we have for sale. Contact us for further details. KraussMaffei 4000-24500 MC • Clamping Force: 40,000 kN • Injection Volume: 10,735 cm³ • Shot Weight (PS): 7,837 g • Injection Pressure: 2,276 bar • Screw Diameter: 135 mm • Screw L/D Ratio: 23 • Nozzle Radius: 25 mm • Nozzle Shut-Off: Hydraulic • Nozzle Immersion Depth: 40 mm • Platen Size (H × V): 3,315 × 2,920 mm • Daylight Opening (H × V): 2,240 × 1,800 mm • Minimum Opening Stroke: 2,200 mm • Mold Installation Height: 1,100–2,000 mm • Maximum Opening Width: 4,200 mm • Centering Ring (Fixed Platen): 315 mm • Centering Ring (Moving Platen): 315 mm • Quick Mold Clamping System: QMC 101.450 • Hot Runner Control Zones: 48 Hjdpfezk E Thsx Aflefk • Pneumatic Cascade Control Circuits: 10 • Hydraulic Cascade Control Circuits: 12 • Core Pull Circuits (Fixed Platen): 3 • Core Pull Circuits (Moving Platen): 4 • Cooling Circuits (Fixed Platen): 18 • Cooling Circuits (Moving Platen): 18 • Temperature Control Units: 36 • Supply Voltage: 400 V • Power Supply: 3-Phase • Frequency: 50 Hz • Motor Current: 622 A • Heater Current: 583 A • Motor Fuse: 630 A • Heater Fuse: 630 A