Used Columbian Press 1858 Letterpress for sale (12,544)

Condition: used, Year of construction: 1998, Continuous body press Manufacturer: LIGMATECH TYPE: MPP 15 Year of manufacture: 1998 The MPP 15 is a flexible press for batch-related production without setup times. The MPP 15 can be used individually or in various combinations in an assembly line. The pressing forces are applied pneumatically. The separately adjustable vertical and horizontal pressure allows for pressing both horizontal and vertical bodies. The vertical forces are transmitted through a plate, while the horizontal forces act on the body via press cheeks. The position of the center press cheeks can be adjusted using adjustable stops, allowing for different heights of bottoms and sides. During the infeed process, the body is measured photoelectrically, which automatically positions the horizontal pressure bar. Technical data: Body dimensions: Length: min. 300 mm / max. 2300 mm Height: min. 300 mm / max. 1220 mm Depth: max. 600/800/1000 mm (depending on the press type) Pressing pressure: vertical max. 17 kN horizontal max. 16 kN Working height: 500 mm Transport speed: min. 8 m/min. / max. 37 m/min. Pressing time: selectable up to 999 s Operating voltage: 400 V, 50 Hz Control voltage: 24 V DC (according to VDE) Required air pressure: 5...8 bar Air consumption: 120 NL/cycle Total connected load: 3 kW Weight: approx. 4 tons Required room height: 3000 mm Extended infeed belt as a staging area Kdjdpfxezuzv To Ahhjr Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2000, Corrugated board press Manufacturer: Hüttenhölscher Year of manufacture: 2000 Kjdozuzvmopfx Ahhsdr Technical data Voltage: 400 V Current: 32 A Frequency: 50 Hz Compressed air: 6 bar Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2001, Short-cycle pressing line Manufacturer: Wemhöner Type: KT-F-1E Year of manufacture: 2001 Technical data - Pressing area: 5,750 mm x 2,200 mm - Operating side: left - Plate dimensions: Length: 2 x 2,600 mm - 2 x 2,620 mm Width: 2,070 mm Thickness: 6 mm - 40 mm - Pressing pressure: approx. 40 kg/cm² Note: Upon request, the complete layout plan of the system can be sent. Kjdpfezuzi Tjx Ahhjdr Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 1998, - Lengths: 1,800 - 2,300 mm - Widths: 500 - 1,300 mm - Thicknesses: 35 / 40 / 44 mm Door pressing system Manufacturer: Wild Year of manufacture: 1998 For door dimensions: - Lengths: 1,800 - 2,300 mm - Widths: 500 - 1,300 mm - Thicknesses: 35 / 40 / 44 mm Consisting of the following sections: 1. Continuous door panel gluing with frame assembly station / 2. Pressing line with hardboard facing station Section 1 consists of: - Gantry loading system - Angle transfer with longitudinal and cross saws - Loading and feeding of the longitudinal and transverse frame parts from magazines - Longitudinal cutting station for the longitudinal frame parts - Connecting station of the frame parts with the door panel core. With clamping devices - Conveyor belt angle transfer with shuttle transfer of the door panel cores onto the glued hardboard Section 2 consists of: - Loading of the hardboard - Brush cleaning machine - Hardener application machine from below - Glue application machine from below - Roller conveyor - Angle transfer for the lower hardboard - Vacuum reversing device for the upper hardboard - Automatic facing station for hardboard and door panel cores - 2 door presses, each with 2 x 4 pressing stations, arranged parallel to each other - Both presses are loaded at the infeed with 1 shuttle loading basket - Both presses are unloaded at the outfeed with 1 shuttle unloading basket - Angle transfer to the infeed into a hedgehog buffer - Angle transfer at the outfeed of the hedgehog buffer and feeding to the stacking station - One-sided vacuum stacking with protective plate space Kodpfx Ahjzuzgrehjdr Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: new, Year of construction: 2026, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed Kdjdpjgvkmrofx Ahhsr of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Condition: used, Platen press, 1300x2500 mm, 20/26. Kodpozvmkxjfx Ahhodr

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 2,420 mm, total length: 6,840 mm, total height: 2,600 mm, overall weight: 15,000 kg, type of input current: three-phase, filling opening length: 2,000 mm, filling opening width: 1,980 mm, input voltage: 400 V, empty load weight: 4,950 kg, DGUV certified until: 08/2027, Presto HGS20R 2 units available Kdsdezt Nirjpfx Ahhjr Container for skip loader trucks 20 cubic meter usable volume Technically refurbished Repainted in desired RAL color Side hook connection Discharge door hinged at the top

Condition: used, The SANDT Type 410 is for DIE-Cutting of difficult materials, particularly in the leather goods and printing industries, leather goods, cardboards and plastic. Kdsdpezukivsfx Ahher Schwenkarmstanze / hydraulic Clicking Press SANDT Typ 410 Serial-No. 760044 Stanzkraft / Pressure 22000kgs Stanzfläche / Die Cutting area max. 650 x 650mm Tischfläche / Cuttig Surface max. 550 x 900mm Hub 0 - 60mm Abmessungen / machine dimension 900 x 870 x 1400mm Gewicht / weight 840kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: like new (used), Year of construction: 1985, machine/vehicle number: 38754, functionality: limited functionality, operating hours: 200 h, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Force: 250 mp (metric tons) Working Surface Length: 5600 mm Working Surface Width: 400 mm Ksdeykl Iaspfx Ahhsdr Working Surface Height: 100 mm Weight: Approximately 37,000 kg Press Sizes (LxHxW): 5700 x 3150 x 5200 mm

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm Kdsdpfxjzum Uzj Ahhsr piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t

Condition: excellent (used), Year of construction: 2006, Dimension: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Kodpfx Aszum Unehhsdr Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min Kedezum Tqspfx Ahhedr The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1994, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Kdjdozum Etjpfx Ahhor Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Technical specifications: Max. dimension of glued component: 1600 x 3000 mm Kodsyv Atrspfx Ahhedr 3 vertical presses 2 horizontal presses Hydraulic presses Power supply: 400 V Motor power: 1.5 kW Motor speed: 1450 rpm Overall dimensions: Length: 1200 mm Width: 3500 mm Height: 2500 mm

Condition: used, We are offering for sale a floor-type press made by the Italian manufacturer Colombo R. Available for immediate delivery. Kdjdpfx Aszry Rwjhher

Condition: used, Year of construction: 1991, functionality: fully functional, Heidelberg MOZP (1991) – 2-Color Offset Printing Press with Perfecting (1/1 or 2/0) Short Technical Description / Summary High-performance 2-color sheetfed offset press Heidelberg MOZP, year 1991. Features an integrated perfecting unit (P) allowing dual capability: printing 2/0 (two colors on one side) or 1/1 (one color on both sides in a single pass). Renowned for exceptional registration accuracy, high durability, and consistent print quality. Key Technical Specifications Manufacturer: Heidelberger Druckmaschinen AG Model: MOZP (P = Perfecting / Свртувач) Year of Manufacture: 1991 Serial Number (Masch. Nr.): 612 123 Country of Origin: Germany Ksdpfxozur E Ss Ahhsdr Number of Printing Units: 2 colors Max. Sheet Size: 480 x 650 mm (18.9" x 25.6") Min. Sheet Size: 140 x 185 mm Max. Printing Speed: Up to 10,000 sheets/hour Plate Size: 525 x 650 mm Weight: approx. 5,200 kg Features & Equipment CPC 1-01 / CPC Control Desk: Centralized remote ink and register control console. Perfecting Unit (1/1 or 2/0): Quick convertible unit for straight printing or perfecting options. Alcolor / Standard Dampening System: Continuous dampening system for fast ink-water balance. Powder Sprayer: Integrated anti-setoff powder spray device. Quick-action plate clamps for fast job changeover. Standard stream feeder and high-pile delivery. Condition & Availability Condition: Used, clean, visually very good, well-maintained in a professional printing environment.

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Kdedpfx Asydpxvjhhjr Machine weight: 21.500 kg

Condition: good (used), pressing force: 50 t, stroke length: 320 mm, Capacity 50 Ton Throat 225 mm Adjustable stroke 8 - 100 mm Number of strokes 320 p/min Ram size 300 x 280 mm Table size 500 x 800 mm Kedpfjtt A T Tsx Ahhedr Machine LxWxH: 160 x 120 x 260 cm Machine weight: 6 Ton

Condition: good (used), pressing force: 80 t, throat depth: 400 mm, ram adjustment: 80 mm, Capacity: 80 Ton Kjdpfx Aougtkxshhedr Table surface: 750 x 550 mm Ram Adjustment: 80 mm Stroke length: 8 -112 mm No. of strokes: 78 p/min. Throat: 400 mm Complete with: - Pneumatic clutch - Safety screen Country of origin: Germany Machine LxWxH: 2000 x 1200 x 2900 mm Machine weight: 7000 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, operating hours: 94,201 h, bending force (max.): 400 t, installation height: 595 mm, control type: CNC control, Bending length [mm]: 3550 Press force [t]: 400 Control: Cybelec ModEva 10s Operating hours [h]: 94,201 Standard equipment: Kedpfx Ahsy Saurjhodr - Robust machine frame as all-steel, welded construction - Ram with high bending strength - Electrohydraulic top drive via proportional valves - Modern block hydraulic system - CNC back gauge for X and R axes, safe finger adjustment from the front via safety interlock - EHT upper tool clamping system, manual, head width 26mm, max. load 3000 kN/m - EHT lower tool clamping, manual, clamping width 90mm for block and 13mm for single V-dies, without clamping - Control: CYBELEC ModEva 10S on Windows, 2D graphical control with 10.4" color display - Control cabinet air conditioning + Back gauge - System 1, 5 axes, straight fingers, 140mm width, R-axis travel 150mm + EHT quick-clamp device for upper tools, pneumatic, head width 26mm, max. load 3000 kN/m (self-centering horizontally) + EHT pneumatic lower tool clamping, clamping width 55mm + Hardened insert strip for EHT lower tool clamping 55mm / 90mm + CNC-controlled lower tool shifting, stepless positioning via back gauge 1 (max. working length 4550 mm) + CNC-controlled crowning device integrated in table, without tool clamping, max. load 3000 kN/m + Lazersafe safety system (for max. upper tool height 440mm) + Additional foot switch + Bending aid, 1st arm, max. load 1500N, with 2 integrated standard support rails + Bending aid, 2nd arm, max. load 1500N, with 2 integrated standard support rails + 2 support rails for a bending aid with 14mm T-slot, ruler, and ball rollers + 2 table extensions for bending aid + Left short park position + Right short park position

Condition: good (used), Year of construction: 2010, functionality: fully functional, bending force (max.): 85 t, installation height: 615 mm, number of axes: 6, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 2720 Press force [t] 85 Control unit TRUMPF TASC 6000 Operating hours [h] 45666 Hydraulics on [h] 13762 - Top drive concept in four-cylinder design Y1/Y2 - Electrohydraulic ram drive with proportional valve technology - Ram position measuring system with deflection compensation via glass scales - Modern block-type hydraulics - Spherical suspension and inclined position of the pressure beam - CNC backgauge system - Safe finger adjustment from the front - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, manual lower tool clamping - Program-controlled lower tool displacement (I-axis) for 2 positions - Flat front cover - Modern safety guard - CE mark - Oil cooler clamping device - Increased installation height - 6-axis backgauge Ksdey Saq Topfx Ahhodr - Hydraulic upper tool clamping - Hydraulic lower tool clamping - CNC crowning - CNC I-axis - BendGuard - ACB preparation - 2 support consoles

Condition: excellent (used), Catalogue number 7737 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1000 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Motor: 5.5 kW - Dimensions (L/W/H): 1800x1150x1540 mm - Weight: 900 kg ADVANTAGES – Italian manufacture – Used briquetting press – DTR technical documentation – Condition: very good Kdsdpjzrnvzefx Ahhjr Net price: 34,900 PLN Net price: 8,300 EUR (based on the rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 44 kW (59.82 HP), pressing force: 500 t, stroke length: 300 mm, operating speed: 9 mm/s, throat depth: 400 mm, clearance between the columns: 5,050 mm, total length: 7,500 mm, total width: 4,200 mm, total height: 5,900 mm, overall weight: 67,000 kg, T1 and T1 bending aid for supporting arm EASY FORM angle measuring and correction system Ksdpfx Aszuyyqjhhjdr Oil tank, 650 liters Set of universal LVD tooling Lightly used under power in Germany New price: EUR 650,000 Max. bending length: 6100 mm Distance between columns: 5050 mm Max. pressing force: 500 tons Distance beam to table: 570 mm Beam stroke: 300 mm Table width: 200 mm Throat depth: 400 mm Approach speed: 100 mm/min Working speed: 9 mm/min Return speed: 80 mm/min Adjustment of X-axis back gauge: 1000 mm Number of controlled axes: 9 Control: TOUCH Crowning: Yes Hydraulic tool clamping: Yes Power: 44 kW Length: 7500 mm Width: 4200 mm Height: 5900 mm Weight: 67,000 kg

Condition: good (used), Year of construction: 2006, functionality: fully functional, Press force: 50 t Bending length: 1275 mm Frame width: 1040 mm Stroke: 215 mm Usable installation height: 385 mm Overhang: 420 mm Standard equipment: - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics - CNC back gauge with rack and pinion drive for the X and R axes - Safe shifting of the gauge fingers from the front - Upper tool clamping system "New Standard Clamping II" manual - Lower tool holder for EV dies, clamping hydraulic, shifting programmable (2 positions) - Control system TRUMPF TASC 6000 - Safety device consisting of side and rear protective doors - Control cabinet air conditioning - Network compatible Optional equipment: Kedpfxszt R Hro Ahhodr - 2 additional gauge fingers, attachable - Upper tool clamping hydraulic - Bendguard - Roll protection cover at the rear - Support console - Preparation for ACB

Condition: good (used), Year of construction: 2007, functionality: fully functional, Press force: 170 t Bending length: 3050 mm Distance between uprights: 2550 mm Kdodpfx Ahezt R Eujhjr Stroke: 445 mm Accessories: - 2 front support arms - Light curtain in front of the machine - Foot switch - Wila quick-release system at the top and bottom - TASC 6000 control system - Die shifting mechanism - Including tools - Crowning - 6-axis back gauge