Used Comec Cnc Work Centre for sale (53,589)

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning Fjdpfoixxwmex Aatepl - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Year of construction: 2020, condition: excellent (used), WM1 300 CNC incl. Renishaw TP 200 Year of manufacture: 2020 Fpodsyuut Topfx Aatjl Clamping tool from DK Fixiersysteme 3-axis CNC control High-resolution CCD matrix camera 1.5x magnification Incident light illumination via LED ring light, 4 sectors and 1 ring individually switchable Precision measuring table in X and Y axes Diode laser for positioning assistance Joystick and trackball for axis movement with fast/slow switching Camera-supported measurement data acquisition Precise edge detection in transmitted and incident light using intelligent image processing algorithms Compact and portable – powerful performance Easy handling with maximum measurement accuracy Special features Including Renishaw TP 200 touch probe system Switchable LED surface illumination Diode laser for positioning assistance With a measuring range of 300 mm × 200 mm × 200 mm, it excels especially in the measurement of stamped, plastic, rubber and milled parts as well as tools, profiles, and PCBs. Key features of the measuring microscope include camera-assisted data acquisition, quick operation, and its high precision. Of particular note is the precise edge detection in transmitted and reflected light, powered by smart image processing algorithms. Despite its powerful capabilities, the WM 1 300 CNC remains compact and handy with dimensions of 900 mm × 950 mm × 950 mm.

Condition: good (used), Year of construction: 1997, operating hours: 10,216 h, functionality: fully functional, turning diameter over cross slide: 200 mm, turning length: 300 mm, spindle bore: 32 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 345 mm, spindle motor power: 11 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (min.): 50 rpm, rotational speed (max.): 8,000 rpm, feed length X-axis: 200 mm, feed length Z-axis: 300 mm, feed rate X-axis: 12 m/min, feed rate Z-axis: 12 m/min, type of input current: AC, torque: 73 Nm, swing diameter over bed slide: 445 mm, chuck outer diameter: 140 mm, spindle nose: DIN55026 Gr. 5, Equipment: documentation/manual, Due to restructuring measures, we are selling our Weiler DZ32 CNC lathe. - Year of manufacture: 1997 - Second owner (previously used in a training workshop) - Very good condition for its age - Very few operating hours - total running hours: 10,216 h - Siemens Sinumerik 820 (GA3) T control with C-axis - Max. turning diameter: 230 mm / max. turning length: 300 mm Fpjdjzzcfpjpfx Aatsl - Main spindle: 8,000 rpm - Counter spindle: 5,000 rpm - 3-jaw hydraulic chuck Röhm 140 mm for main spindle - Additional collet chuck for main spindle - Collet chuck for counter spindle - Drive power: 11.5 kW - Sauter tool holder with 16 driven tools (max. 4,000 rpm) - Tool holder size: VDI 20 - Chip collection tray (hydraulic) - With substructure for height adjustment - Fully functional - Many tool holders available, also with drive; these can be purchased depending on the price. - Complete operating and programming documents (German) - Spare parts and service available from Weiler - Machine can be inspected in our workshop while powered on This offer is non-binding. Subject to prior sale. No online sales. The sale is only to commercial customers after an on-site inspection and acceptance. Due to the age of the machine, the sale is made without any warranty. Pick-up only (EXW) - no shipping.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Technical specifications of the DOOSAN LYNX 220A metal lathe swing over bed: 510 mm maximum turning diameter: 320 mm recommended turning diameter: 170 mm maximum turning length: 322 mm bar diameter: 45 mm X-axis travel: 175 (160+15) mm Z-axis travel: 160 mm rapid traverse rate in X/Z axis: 30/36 m/min spindle speed: 6000 rpm spindle bore diameter: 53 mm spindle bearing diameter: 90 mm spindle nose: A2-5 spindle drive power (30 min/continuous power): 15/11 kW chuck diameter: 6″ tool diameter: 25×25 mm boring bar diameter: 40 mm tailstock quill diameter: 65 mm tailstock quill stroke: 80 mm tailstock quill taper: MT4 X,Z axis drive power: 1.8 kW coolant pump motor power: 0.18 kW rated power: 23.68 kVA power interruption resistance: 17 kA full load current: 62.15 A short-circuit resistance: 65 kA power supply: 3x 200/220 VAC; 50/60 Hz Fpsdpfxezx S A Ee Aatol dimensions (L x W x H): 2325 x 1600 x 1600 mm weight of DOOSAN LYNX 220 A machine: 2900 kg Equipment of the DOOSAN CNC lathe CNC control unit: DOOSAN FANUC i Series 12-position turret tailstock lubrication system cooling system foot switch control hydraulic unit tightly sealed work area enclosure with a lock for the front door work area lighting

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Fedpozu T Smjfx Aatspl Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Fedszkbiropfx Aatjpl Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79248 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2004, machine/vehicle number: 1130.2623-31, No minimum price – guaranteed sale to the highest bidder! Fsdpfx Aezy Ukuoatepl The machines are still assembled, but disconnected from the power supply. An 11-ton forklift is available on site for loading. For sale is a CNC lathe manufactured by VDF Boehringer, model: NG 180-2. TECHNICAL DETAILS Operating voltage: 400 V Phases: 3 Type of current: AC Frequency: 50 Hz

Condition: used, Comec FRO1000 cross-profile milling machine for the precise machining of cross-profiles and shaped millings on solid timber and wood-based materials. The robust construction and the sturdy milling unit ensure consistently precise profiles in both batch and single-piece production. Technical data: - Working width: approx. 1,000 mm Fodjztvxgopfx Aatjpl - Spindle diameter: 40 mm - Feed: Pneumatic

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 350 mm, turning length: 610 mm, turning diameter: 350 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 650 mm, rotational speed (min.): 45 rpm, rotational speed (max.): 4,500 rpm, total height: 1,620 mm, total length: 2,750 mm, total width: 1,535 mm, feed rate X-axis: 24 m/min, feed rate Z-axis: 24 m/min, type of input current: three-phase, overall weight: 5,000 kg, spindle nose: A2-6, Equipment: documentation/manual, rotational speed infinitely variable, This machine comes from a training organization and can be seen in operation at our location! Additional options & accessories: - Measuring arm - High-pressure coolant pump - Electronic handwheel - Various 25x25 mm and drill chucks - Foot pedal - 3-jaw chuck, Ø210mm - Original Feeler + FANUC documentation. Fedpjzy Nc Eofx Aatopl Weight & dimensions: 5000 kg 2750x1535x1620 mm (LxWxH)

Condition: used, machine/vehicle number: 008395, X axis working area: 3050 mm Y axis working area: 1250 mm Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 27 Total number of tool changer positions: 8 Fpedpfxeygtcqj Aatjl

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 750 mm, controller model: FANUC 0i-TC, Equipment: bar feeder, TECHNICAL DETAILS Fpedpezwghmefx Aatjl Travel range, X-axis: 300 mm Travel range, Z-axis: 750 mm Rapid traverse rate, X-axis: 20 m/min Rapid traverse rate, Z-axis: 24 m/min Spindle speed max.: 3,500 rpm Bar diameter: 75 mm Spindle motor power: approx. 15 / 18.5 kW Tool turret stations: 12 MACHINE DETAILS Control system: FANUC 0i-TC Number of axes: 2 Dimensions & Weight Dimensions (L x W x H): approx. 3,300 × 1,800 × 1,800 mm Machine weight: approx. 5,500 kg Bar feeder FEDEK DH-65L Bar length: approx. 1,500 mm Bar diameter: approx. 5–65 mm EQUIPMENT Tailstock FEDEK DH-65L bar feeder Bar feeder interface

Condition: used, functionality: fully functional, CNC Machining Center MAHO MH 600 C – working, under power For sale CNC machining center MAHO MH 600 C, manufactured by MAHO AG (Germany). The machine was used in production and was operating until recently. It is fully functional and can be demonstrated under power. Control system: Grundig / Philips CNC 532 Serial number: 661999 Fjdpszgcifsfx Aatjpl Equipment: • Philips / Grundig CNC 532 control • automatic tool magazine (30 positions) • rotary table (4th axis) • coolant system • full machine enclosure Technical data: • X travel: 600 mm • Y travel: 450 mm • Z travel: 450 mm • spindle taper: SK40 • spindle speed: up to approx. 6300 rpm • tool magazine: 30 positions • machine weight: approx. 3.6 t Condition: • fully operational • used in production until decommission • available for inspection under power Technical Condition Information The machine is currently still in occasional use in our production facility and remains operational. However, we believe in complete transparency and would like to point out that the CNC control software occasionally freezes. Therefore, the machine should be considered as potentially requiring troubleshooting or repairs. For this reason, we believe it is best suited for buyers with experience in servicing CNC machine tools, maintenance companies, or businesses looking for a valuable source of spare parts. This technical condition is also reflected in the attractive asking price. The machine is sold as is, in its current condition. We strongly encourage all interested buyers to inspect the machine personally and see it operating in our facility before making a purchase. We will be happy to demonstrate its operation and answer any questions. The machine is being sold not because it has reached the end of its useful life, but because we are upgrading our production equipment and purchasing a new machining center.

Condition: good (used), functionality: fully functional, spindle bore: 56 mm, turning diameter: 460 mm, JESSEY 1850 ENC CNC Teach-In Lathe — For Sale Reliable Taiwanese-built teach-in CNC lathe equipped with an Anilam 4200T control. Ideal for both manual and programmed turning operations, well suited for workshops that need the flexibility of conventional turning combined with full CNC capability for repeat work. Key features - Anilam 4200T CNC control with Teach-In mode - Heavy-duty spindle with generous bar capacity - Long bed for shaft and large-component work Fpedpfey Hmilsx Aatjl - Tailstock included Technical specifications CNC control: Anilam 4200T Distance between centres (turning length): 1250 mm Swing over bed: 460 mm Max. turning diameter: 460 mm Spindle bore (bar capacity): 56 mm Spindle motor power: 7.5 kW Max. spindle speed: 1800 rpm Tailstock: Yes

Condition: used, Year of construction: 2000, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 650 mm, controller manufacturer: Heidenhain TNC426/430, total height: 2,400 mm, total length: 2,600 mm, total width: 3,100 mm, table width: 600 mm, table length: 1,300 mm, overall weight: 5,500 kg, spindle motor power: 28,000 W, X - Travel 1000 mm Y - Travel 450 mm Z - Travel 650 mm Table Length 1300 mm Table Width 600 mm Length 2600 mm Fpsdpfezimklox Aatel Width 3100 mm Height 2400 mm Weight 5500 kg

Year of construction: 2011, operating hours: 45,000 h, condition: good (used), functionality: fully functional, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 805 mm, spindle diameter: 150 mm, spindle bore: 51 mm, spindle speed (max.): 5,000 rpm, MAZAK INTEGREX 100 IV ST multitasking center Year 2011 Control unit: Matrix Maximum workable length: 753 mm Maximum workable diameter: 545 mm Bar diameter: 51 mm Main spindle diameter: 200 mm, 2-jaw chuck Main spindle power and speed: 11 KW, 5000 rpm C-axis: 360° Counter-spindle diameter: 200 mm, 2-jaw chuck, self-centering Counter-spindle power and speed: 11 KW, 5000 rpm C-axis on counter-spindle: 555 X-axis travel: 410 Y-axis travel: 140 Z-axis travel: 805 B-axis travel: 225° Milling spindle power: 5.5 KW Milling spindle speed: 12,000 rpm Spindle mounting: CAPTO C6 Maximum tool storage capacity: 40 tools Lower turret: 9 positions, CAPTO High-pressure system through the spindle: 20 BAR Fpsdpfx Aaozz Rxwstjl Chip conveyor: belt type Automatic door Robot interface

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Fpjdpfx Aaozizkyjtsl Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a state-of-the-art CNC-controlled waterjet center consisting of 2 machines Machine 1: Robot with processing cell and integrated SERVO turning table. Machine 2: Robot with 2 processing cells and 2 integrated SERVO turning tables. This waterjet center is ideal for companies looking for a flexible and efficient solution for demanding cutting tasks. They are characterized by high precision, flexibility and reliability. - Robot arm NJ-16-3.1 Foundry: The robot has a load capacity of 16 kg and a working radius of 3100 mm. It is particularly robust and flexible, equipped with an IP65 protection class and is flange-mounted directly behind the cell. - SERVO turning table: With a maximum load of 500 kg and a faceplate center width of 2800 mm, the interpolating turning table offers maximum precision and repeatability. - Processing cell: The processing cell measures 2350 x 4500 mm and is equipped with sound insulation. - High-speed roller shutter: Integrated into the cell wall, the high-speed roller shutter ensures safe access and complies with Machinery Directive 2006/42/EC. - SL-VI 30 Plus high-pressure pump: This pump achieves a pressure of up to 4136 bar, ideal for precise cutting processes. Fedsua U Tzopfx Aatepl - Water cutting head: The water cutting head is a central component of the system and offers maximum precision. It is equipped with a high-pressure line feed, a manual change system for quick replacement. Additional features: - CNC control: Siemens 840D controller with integrated PROFINET for controlling the robot and integrated S7 319 safety technology. - Cyclone separator: Efficient system for particle separation - Programming options: The robot is programmed using simulation software, machining takes place in the CAM system and the programs are transferred via G-code. Main features Rotary table cells: - Robot arm NJ-16-3.1 Foundry: This robot has a load capacity of 16 kg and a working radius of 3100 mm. With an IP65 protection class, it offers a high level of robustness and flexibility. - SERVO rotary tables: The system is equipped with two SERVO rotary tables, each with a load capacity of 500 kg. These rotary tables enable precise machining of large workpieces with a maximum component size of 1000 x 1000 x 1000 mm. The repeat accuracy is ±0.15 mm with a rotation of 180° in just 5 seconds. - Machining cell: The machining cells each have a size of 2350 x 4250 mm. - 2 high-speed roller shutters: Integrated into the front wall of each cell, the cold-resistant and antistatic high-speed roller doors ensure safe access to the processing cell. The waterjet center offers outstanding processing flexibility and is suitable for various industrial PUR waterjet applications. Price on request or guide price < €300,000 Contact: For more information or to arrange a viewing appointment, please contact us on the telephone number provided.

Condition: used, Year of construction: 1988, Tool CNC Milling Machine HERMLE type UWF 1000 CNC Year of construction: 1988 Travel X: 700 mm Travel Y: 550 mm Fedpfozy Rrnjx Aatspl Travel Z: 500 mm Numerical Command: HEIDENHAIN TNC 155 Spindle ISO 40 Spindle: Ø 70 mm Spindle speed: from 25 to 3150 RPM Table size: 1000 x 500 mm Vertical sleeve travel: 100 mm Swivel head Spindle motor: 6,9 kW Weight: 3,3 T

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 680 mm, turning diameter: 465 mm, spindle speed (max.): 3,500 rpm, spindle bore: 76 mm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 3,500 rpm, type of input current: three-phase, total height: 2,120 mm, total length: 4,865 mm, total width: 1,770 mm, spindle nose: FL 220 h5, overall weight: 7,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, The Gildemeister CTX 510 is a rather heavy, industrial CNC turning machine. It is a machine that is particularly interesting if you want to machine a lot of material and are not just doing light turning operations. We acquired this machine in working condition from the first owner and it can also be inspected in working condition! Fpjdozyai Nopfx Aatel Additional options & accessories: - Full pallet with static VDI-40 tool holders. - Chip conveyor - Marposs measuring arm - Collet chuck 173E (Quadro NC - Marquar) - Adapter sleeve for 185E collet chuck - Coolant gun - High-pressure coolant pump - Chip conveyor - Double foot pedal - Original Gildemeister documentation. Weight & dimensions: 7,500 kg 4865 x 1770 x 2120 mm (L x W x H incl. chip conveyor)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 160403, working length: 500 mm, power of feed motor: 7,500 W, HORIZONTAL MILLING MACHINE COMEC FRO 500 - CE RULES - Working width 500 mm - Motor 7.5 kw - S/N 160403 Fodeywcgnspfx Aatopl - Year 2016

Condition: used, Year of construction: 2008, machine/vehicle number: M11W100487, turning diameter over cross slide: 550 mm, turning length: 2,500 mm, turning diameter: 610 mm, spindle bore: 125 mm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 180 mm, travel distance Z-axis: 2,560 mm, spindle motor power: 42 W, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 2,500 rpm, feed length X-axis: 410 mm, feed length Y-axis: 180 mm, feed length Z-axis: 2,560 mm, quill travel distance: 150 mm, quill diameter: 150 mm, quill stroke: 150 mm, swing diameter over cross slide: 550 mm, turning diameter over bed slide: 820 mm, torque: 2,000 Nm, overall weight: 6,000 kg, swing diameter over bed slide: 820 mm, chuck outer diameter: 400 mm, spindle nose: A2-11" (KK11) DIN 55026, CNC Turning Center EMCO Maxxturn 110 | Year of Manufacture: 2008 | Spindle A2-11" & Y-Axis For sale is a powerful CNC turning center for complete machining from the manufacturer EMCO, model Maxxturn 110. Equipped with the large A2-11" main spindle (ZF two-stage gearbox), C-axis, Y-axis, and driven tools, the machine is ideal for heavy machining and complex milling operations. General Machine Data * Manufacturer: EMCO * Model: Maxxturn 110 Fjdjzypxtopfx Aatspl * Year of Manufacture: 2008 * Serial Number: M11W10048 * Control System: Siemens SINUMERIK 840D (with ShopTurn) * Machine Weight: 6,000 kg (L2500) Working Area * Swing diameter over bed: 820 mm * Swing diameter over cross slide: 550 mm * Max. Turning Diameter: 610 mm * Max. Part Length: 2,500 mm (depending on equipment) * Distance between centers: 1,666 mm / 2,666 mm Travel & Feeds * X-axis: 410 mm (rapid traverse: 24 m/min) * Z-axis: 2,560 mm (rapid traverse: 30 m/min) * Y-axis: -80 / +100 mm (rapid traverse: 12 m/min) Main Spindle (A2-11") * Spindle connection: A2-11" (KK11) DIN 55026 * Drive: ZF gearbox motor (2-stage: 1:1 / 1:4) * Speed range: 0 - 2,500 rpm * Drive power (100/40% ED): 35 / 42 kW * Torque (100/40% ED): 1,672 / 2,000 Nm * Spindle bore: 125 mm * Bore in draw tube (part-through boring): 110 mm * Bearing inner diameter (front): 190 mm * Clamping device: Röhm power chuck (prepared for max. 400 mm) C-Axis * Drive: Automatically swiveling gearbox motor * Torque: 2,000 Nm * Holding torque spindle brake: 2,400 Nm * Rapid traverse: 15 rpm Tool Turret & Driven Tools * Number of stations: 12 (all driveable) * Tool holder: VDI 50 (DIN 69880) * Additional holders: 12 block tool stations on the circumference * Switching time (incl. locking): 0.5 s * Speed of driven tools: 0 - 4,000 rpm * Power of driven tools: 10 kW * Torque of driven tools: 56/66 Nm (Siemens) Tailstock & Steady Rest * Quill stroke: 150 mm * Quill diameter: 150 mm * Taper: MK 5 * Max. clamping force: 22,500 N * Steady rest: Prepared for traveling steady rest (e.g. Röhm SLZ 1152) Coolant & Disposal * Hinged belt chip conveyor (integrated into the basic machine) * Coolant pressure through turret: 7 bar (optional 14 bar) From an insolvency proceeding, sale as is. Offer deadline: September 30, 2026, 6:00 PM. Package price for multiple machines from this proceeding is possible. Inspection: September 16, 2026, 10:00 AM - 12:00 PM, Fraunhoferstraße 10-12, 04178 Leipzig. Collection: October 6, 2026, 9:00 AM - 4:00 PM. Further information and offer submission can be found on our IKV Fester GmbH homepage under Auctions.

Condition: ready for operation (used), Year of construction: 2014, A CNC dual spindle woodworking machining system Homag is available. Travel speed: 35m/80m/25m/min, C-axis: 360°, A-axis: +/-100°, Z stroke: 600mm. Workpiece length range: 2450mm/17400mm, max. workpiece width: 1900mm, max. workpiece thickness (incl. clamping devices): 300mm. Main spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, saw blade diameter: 350mm. Second spindle power: 18.5kW, speed: 24000rpm, tool holder: HSK-F63. Tool positions: 18/2x10. Total system dimensions X/Y: approx. 19000mm/6300mm, control: Homag. Including underfloor milling unit Homag, 3xtool changers, pickup position, clamping platforms, vacuum clamps, workpiece lifter, laser and additional units. Documentation available. An on site inspection is possible. Fpsdeytgn Tspfx Aatol

Condition: used, Year of construction: 1984, functionality: fully functional, Technical Data: Working Area X axis: 500 mm Y axis: 400 mm Z axis: 300 mm Working Spindle with rotary table Tool holder: ISO 40 Automatic feeds: 0.2 - 0.6 - 0.12 mm/min Spindle speeds: 20 - 4000 rpm, directly programmable Feed range: X / Y / Z = 1 - 3000 mm/min Fixed table: 700 x 350 mm, 5 T-slots Fixed table: max. load 250 kg Connection: 400 V Weight, approx.: 1900 kg Machine dimensions, approx.: 2400 x 1850 x 1850 mm Space requirement: 3200 x 4100 mm, height 1920 mm Equipment: - CNC control - Fixed table - Milling head swivels +/- 90° Fpsdpfoyzy Azex Aatsl - Hydraulic clamping device - Coolant system - Emergency stop push button

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. Fpedpfxozzyt Ds Aatol No private sales.

Condition: excellent (used), Year of construction: 2006, turning diameter: 250 mm, spindle bore: 90 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 320 mm, spindle motor power: 11 W, type of input current: three-phase, overall weight: 4,600 kg, Equipment: documentation/manual, HYUNDAI-KIA SKT 21 VM CNC VERTICAL LATHE CNC vertical turning center with an inverted spindle, C-axis, and driven tools. Technical data: Manufacturer: Hyundai-Kia Model: SKT 21 VM Machine type: CNC vertical lathe / vertical turning center CNC control: FANUC Max. turning diameter: approx. 250 mm Max. workpiece diameter: approx. 350 mm Chuck size: 8" Spindle nose: ASA 6 Spindle speed: up to 5,000 rpm Spindle motor power: 11 kW Spindle bore: approx. 90 mm Tool turret: 12 tool stations VDI 40 tooling system Driven tools C-axis Axis travel: X-axis travel: approx. 1,255 mm Fsdszzvmmopfx Aatjpl Z-axis travel: approx. 320 mm Rapid traverse: approx. 30 m/min Machine equipped with: C-axis driven tools 12-position tool turret hydraulic chuck coolant system chip conveyor FANUC CNC control