Used Condenser Guntner 244Kw for sale (954)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone. Lhedpfx Asy Hkd Hon Iei

Condition: good (used), Bitzer Model: S4G-12.2Y-40P Bitzer Refrigeration Compressor / Refrigeration Unit Description: For sale is a BITZER refrigeration compressor / condensing unit complete with pressure vessel and control system. This unit is designed for generating refrigeration or compressing refrigerant in cooling and industrial applications. Typical applications include: - Refrigeration units / cooling systems - Industrial cooling / process cooling - Cold storage / commercial refrigeration - Machine cooling The robust Bitzer compressor is engineered for continuous operation and is renowned for its high reliability. The unit features pressure switches, oil monitoring, and an integrated pressure vessel/heat exchanger. Technical Data: Manufacturer: BITZER Kühlmaschinenbau GmbH Compressor model: S4G-12.2Y-40P Receiver tank model: K573H Electrical specifications: Voltage: 400 V three-phase (3~) Frequency: 50 Hz Max. operating current: 24 A Starting current: 69 A / 113 A Protection class: IP54 Performance data: Displacement: approx. 42.3 m³/h Speed: 1450 RPM Max. low/high pressure: 19 / 28 bar Receiver tank: Volume: 29.4 liters Max. permissible pressure: 33 bar Temperature range: -10 °C to +120 °C Approximate dimensions & weight: Length: approx. 110 – 120 cm Width: approx. 50 – 60 cm Height: approx. 70 – 80 cm Lhodjzizpvspfx An Iji Weight: approx. 180 – 220 kg Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors excepted!) For any further questions, please feel free to contact us by phone.

Condition: excellent (used), RS Simulators Type: KKM 110/45 Manufacturer: RS-Simulatoren, water-cooled Climate chamber 110m³ incl. condenser The KKM 110/45 type belongs to the TKM/KKM modular design of RS-Simulatoren, meaning it is a climate chamber with a modular structure that is assembled on-site. This design offers: Modularity: Individual segments are pre-assembled and installed at the customer's location. This makes retrofitting (more depth or additional modules) as well as later relocation straightforward. Technical data climate chamber: Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Type: KKM 110/45 External dimensions: 6200 x 9400 x 3400 (W x D x H in mm) incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 (W x D x H in mm) Chamber door (double-leaf) 3600 x 2930 (W x H in mm) Personnel door (single-leaf) on side wall 1880 x 900 (H x W in mm) Feedthroughs: 8 x Ø120mm (4x left & 4x right) Windows: 1x (460 x 550mm) in the front chamber door, heated 1x (1260 x 1000mm) in the left side wall, heated Temperature range: -40°C to +120°C Time deviation: ± 0.8K – 1.5K according to DIN 50011 in an empty test chamber Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52kg 2x R23 17kg Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Max. surface load 500kg / m² Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components Lsdpfx Anozizlde Iohi 2. If necessary, refill with legally compliant refrigerants 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: new, power: 290 kW (394.29 HP), fuel type: diesel, empty load weight: 7,540 kg, maximum load weight: 12,960 kg, overall weight: 20,500 kg, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 4,500 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden. Mercedes PowerShift 3, company ownership, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, leaf suspension, roof hatch, green environmental sticker. Lhodpfx Ansxzkcps Iei Wheelbase: 4,500 mm. 8t front axle; rear axle with 300 crown wheel and hub reduction, 13.4t. Electronic braking system with ABS and ASR, switchable ABS, disc brakes with full protection on front and rear axles, electronic parking brake, condensate monitoring for compressed air system, stabilizers on front and rear axles, seat belt monitoring system, construction site filter, PSM 2nd generation, reversing warning system, CompactSpace, light sensor, off-road driving program, Mercedes PowerShift 3, Multimedia Cockpit, daytime running lights, high-performance engine brake, transmission oil cooling, transmission lock for NMV, NMV clutch-dependent MB 1.65, rear engine PTO for hydraulic pump SAE A. New vehicle from stock with day registration on 24.11.2025! Frame length approx. 5,400 mm. Frame height approx. 1,120 mm. ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to changes, prior sale and errors!

Condition: used, mileage: 2,62,130 km, power: 315 kW (428.28 HP), first registration: 09/2015, overall weight: 18,000 kg, fuel type: diesel, color: blue, axle configuration: 4x2, maximum load weight: 3,350 kg, empty load weight: 14,650 kg, next inspection (TÜV): 10/2025, wheelbase: 4,200 mm, brakes: constant throttle, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, Mercedes PowerShift 3, rental car, 1x comfort seat, heated seats, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, cruise control, auxiliary heating, air horn, ABS (anti-lock braking system), traction control (ASR), power take-off, raised exhaust, automatic transmission, differential lock, fog lights, work lights, rotating beacon, storage box, leaf air suspension, roof hatch, radio remote control, green environmental sticker. Wheelbase: 4200 mm. Body: Müller Canalmaster CM F 80 ET suction and flushing truck with approx. 8m³ (6,500l sludge chamber/1,500l water chamber) and radio remote control. Front axle 9t, rear axle with 300 planetary gears 13.4t, electronic braking system with ABS and ASR, disc brakes with partial protection front and rear, condensate monitoring for the compressed air system, front stabilizer, additional stabilizer for rear/trailing axle, aluminum front underrun protection, residual heat recovery, auxiliary hot water heating, construction site filter, PSM, reversing alarm, CompactSpace, comfort locking system, Power drive program, Mercedes PowerShift 3, clutch-dependent NMV MB 1.2, NMV transmission lock, transmission oil cooling, refrigerator, ESP: Wittig Aqualine 1600 water ring vacuum pump 400mbar/1300m³/h Lhodpfx Aewc D Dfen Iji Uraca KD 716/G 60-110/MU high-pressure piston pump 170bar at 325l/min Operating hours Vehicle: 11112h Body: 2474h ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! - .

Condition: new, power: 330 kW (448.67 HP), fuel type: diesel, empty load weight: 8,795 kg, maximum load weight: 17,205 kg, overall weight: 26,000 kg, tire size: 315/70R22.5, axle configuration: 6x2, wheelbase: 5,200 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, StreamSpace, Active Brake Assist, Mercedes PowerShift 3, large cab, 1x comfort seat, 1x bunk, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, electric roof, auxiliary heater, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, beacon, steel/air suspension, last axle liftable and steerable, trailer coupling with air and light connections, aluminum tank, underride guard, green emissions sticker. Wheelbase: 5200 mm, 8t front axle, 13t hypoid bevel gear rear axle 440, 7.5t trailing axle steerable/relievable/liftable, electronic braking system with ABS and ASR, disc brakes front and rear, electronic parking brake, condensate monitoring for compressed air system, front axle stabilizer, additional stabilizer rear/trailing axle, aluminium front underride protection, seat belt monitoring, comfort lower bed, residual heat utilization, auxiliary hot-water heater, electric lifting roof, PSM 2nd generation, hill-start assist, reverse warning, StreamSpace, comfort central locking, light sensor, rain sensor, Mercedes PowerShift 3, driving programs economy/power, Multimedia Cockpit Interactive, pre-equipment for toll collection, tank capacity: 630l, LED daytime running lights, automatic high/low beam, transmission oil cooling, chrome interior package, ESP, lane keeping assist, Active Brake Assist 5, attention assist, PTO MB 123-10c MPA N-/M speed. Lhodpevhl Azsfx An Ioi Frame length approx. 7850 mm! New vehicle from stock with day registration on 26.11.2025! ACCESSORY DETAILS WITHOUT WARRANTY, subject to change, intermediate sale and errors excepted!

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: Lsdozizghopfx An Iehi - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 Lsdpozizdyofx An Ijhi - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Complete analysis using the stationary spark spectrometer SpectroMaxX: With the aid of the spark spectrometer, the alloy content and trace elements of macroscopic solid samples can be determined with high accuracy down to the ppm range. Description of the system: Open spark stand for high sample throughput A wide variety of sample geometries are possible The following elements are available as a basis: Magnesium The analyzable elements and concentration levels depend on the methods available for the respective base element. Usable wavelength range: 170-670 nm Output of measurement values in concentrations or intensities Selectable output units (%, ppm) Output of statistical parameters (mean, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized for customer requirements Expansion with additional modules possible on-site Spark stand: Open spark stand for high sample throughput and various sample geometries Minimized argon consumption through argon-saving module Optimized argon flow Reduced cleaning intervals Spark stand plate easily replaceable Temperature-absorbing design without water cooling Integrated shutter system for optimal plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation, and digital offline pulse control 32 MHz microcontroller Max. spark duration: 4000 µs Max. spark power 4 kW Display system: Dedicated microcontroller for each CCD Serial interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic checking and identification of alloy/grade Result manager Online maintenance scheduler Environmental conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity: 80%, non-condensing Atmosphere: free of corrosive fumes and high dust levels Spectrometer: 90-253 V 50/60Hz Ljdpfozizdtjx An Ijhi Data max. 400 VA during sparking Fuse: 16 A slow-blow Version: Tabletop Depth: 750 mm Width: 625 mm Height: 450 mm Weight: 77 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z, Refrigerant R23/R404A Lhedeziycbopfx An Iei Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- keys - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for user-side test specimen connections Shelving: Stainless steel, shelf area 820 x 710 mm Load capacity per shelf max. 35 kg Total load capacity with full shelf configuration 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range -70°C to +180°C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate according to DIN 50 011, Part 12 measured at the center of the test chamber: Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without thermal radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current 10.2 A Protection class IP 22 Condensate drain non-pressurized, R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information reserved!) Further questions can be answered by phone.

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 900 W, with electronic defrosting, for continuous operation. Very quiet operation. Dehumidification capacity max. 50 l/24 h, air volume max. 265 m3/h. Electronic control unit with illuminated large control panel and memory function. Electronic hygrostat. Air filter. Internal 7.7 l condensate container. In sturdy plastic housing with castors. In cardboard box. Lhodstty Rajpfx An Iei Dehumidification capacity: ≤ 50 l/24 h Air volume: ≤ 265 m³/h

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 1200 W, with automatic hot gas defrosting system, for continuous operation. Very quiet operation. Dehumidification capacity max. 80 l/24 h, air volume max. 850 m3/h. Electronic control unit with illuminated 3"" display and memory function. Electronic hygrostat, operating hours counter, power consumption counter. Air filter. In a sturdy sheet steel housing on a mobile tubular steel frame with large wheels. In cardboard box. Condensate container not included (see accessories below!) Dehumidification capacity: ≤ 80l/24h Air volume: ≤ 850 m³/h Lhjdpouy Thmefx An Iji Super offer: When you buy a REMS Secco 80 set, you will receive 1 REMS Detect W humidity measuring device free of charge. You save an additional 233.55 euros. The offer is valid until 31.12.2024

Condition: new, REMS Orkan 2050. electric construction fan for commercial use. For ventilation of rooms, intermediate spaces, shafts, cavities and for ventilation and wind cooling of machines, marquees, event halls. To support air exchange in damp, musty cellars. Especially for accelerating the drying of e.g. concrete, masonry, plaster, screed. Condenser motor 230V, 50Hz, 145W, for continuous operation. Very quiet operation. Air volume 1740/2050m³/h. In sturdy plastic housing. In cardboard box. Air volume: 2050 m³/g Motor: 230 V, 50 Hz, 145 W Lhjdetty Nnopfx An Isi

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 77.4 kW (105.23 HP), type of input current: three-phase, type of cooling: air, overall weight: 682 kg, input voltage: 400 V, total width: 2,180 mm, total length: 1,160 mm, total height: 2,000 mm, warranty duration: 12 months, heating capacity: 80.2 kW (109.04 HP), AIRCOOLED CHILLER/HEAT PUMP PANASONIC P-AQAZ0075HA.EC 77.4 KW/80.2 KW Cooling capacity: 77.4 kW / 22.01 tons (12/7 — 35°C) Heating capacity: 80.2 kW / 22.8 tons (40/45 —7°C) Year of manufacture: 2024 Options: Heat pump. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland YP154K1T-TFD-GCV (scroll) + 1 pcs. Copeland YP182K1T-TFD-GCV (scroll) Type of refrigerant: R32 Number of fans: 2 pcs. (EC-fans) Dimensions: 1.16x2.18x2 m Weight: 682 kg Working hours: 60/68 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Ledpfx Aezi Dq Aon Ijhi Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 77.3 kW (105.10 HP), type of input current: three-phase, type of cooling: water, overall weight: 392 kg, input voltage: 400 V, total width: 1,250 mm, total length: 850 mm, total height: 1,600 mm, warranty duration: 12 months, WATERCOOLED CHILLER PANASONIC P-WQE0075CA 77.3 KW Cooling capacity: 77.3 kW / 21.98 tons (12/7 — 35°C) Year of manufacture: 2024 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Plate Compressors: 2 pcs. Copeland ZP154KCE-TFD-477 (scroll) Type of refrigerant: R410A Dimensions: 0.85x1.25x1.6 m Weight: 392 kg Working hours: 10/10 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Ledpfx Ajzi Dltjn Ijhi

Condition: good (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 20 kW (27.19 HP), type of input current: three-phase, type of cooling: air, overall weight: 266 kg, input voltage: 400 V, total width: 1,480 mm, total length: 510 mm, total height: 2,010 mm, warranty duration: 6 months, heating capacity: 20 kW (27.19 HP), Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 20 AIR EVO HP 20 kW/20 kW Cooling capacity: 20 kW / 5.69 tons (12/7 — 35°C) Heating capacity: 20 kW / 5.69 tons (40/45 —7°C) Year of manufacture: 2014 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi ANB42FPJMT (scroll, inverter) Type of refrigerant: R410a Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump EBARA matrix 5-2T/0,45 COIB, buffer tank 112 l. Dimensions: 0.51x1.48x2.01 m. Weight: 266 kg. Condition: Good CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. Ljdpfx Aezi Dhnsn Ishi LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 349.6 kW (475.32 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,800 kg, input voltage: 400 V, total width: 2,200 mm, total length: 5,160 mm, total height: 2,450 mm, warranty duration: 12 months, heating capacity: 363.1 kW (493.68 HP), AIRCOOLED CHILLER/HEAT PUMP AERMEC NPG1200A4 349.6 KW/363.1 KW Cooling capacity: 349.6 kW / 99.4 tons (12/7 — 35°C) Heating capacity: 363.1 kW / 103.24 tons (40/45 —7°C) Year of manufacture: 2024 Options: Heat pump. 4-pipe system Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland YP485K1T-TED-GCR (scroll) + 2 pcs. Copeland YP233K1T-TED-GCR (scroll) Type of refrigerant: R32 Number of fans: 8 pcs. (Frequency inverter) Dimensions: 5.16x2.2x2.45 m Weight: 3800 kg Working hours: 105/105/630/630 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS Lsdezi Ddiepfx An Ijhi - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: as good as new (ex-display), Year of construction: 2026, Spray cleaning system – parts washing system – NEW SYSTEM / pilot system Basket useful dimensions: L x W 1,100 x 1,100 mm Useful height: 800 mm Maximum load weight: 700 kg Tank volume: 320 liters, spray pressure: 4.3 bar, can be heated up to 80°C System completely manufactured in stainless steel 1.4301 (AISI 304) System including loading trolley in front of the system Included special equipment: - Steam extraction with condensate return - Automatic water replenishment and level monitoring Lhsdpfx Aec Udkbjn Ioi - Filter unit (coarse filter) in the return line - Preparation for retrofitting an oil separator - Weekly timer - Electric spray lance for optimized cleaning of smaller parts - Inspection hatch in the tank area - Siemens Logo control system with a color touch panel, manufactured by Weintek (4.3") Upon request, commissioning can be carried out by qualified personnel for an additional charge.

Condition: used, Year of construction: 1986, functionality: fully functional, AUTEFA Bale Press LIFT BOX - semi-automatic bale press Lhjdpfoytb Sgox An Isi - 2-chamber system - pre-press - final press - automatic TITAN strapping machine - control unit renewed in 2015 - hydraulics completely renewed in 2018 - condenser new in 2012 - fork bale removal trolley - transport segments (roller conveyors) - turntable - roller conveyor scale - roller conveyor lift table - packaging material - bale size WxLxH 1250x750x1100 mm - bale weight approx. 330 kg - daily throughput 25-30 t System available 2x (price per unit) Please note that disassembly, packing, and shipping/collection must be carried out by the buyer.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, NEW Equipment for feeding defrosted fish raw materials to the blanching area Equipment for blanching fish raw materials - Provide mechanized or manual delivery of fish raw materials (arranged in one or more layers) to the heat treatment area; · Provide heat treatment (blanching) liquid of fish raw materials (a mixture of water, salt water, water vinegar) or in a steam environment; · The speed of the blanching conveyor is variable; · The blanching temperature is adjustable (50-100 C) and constant maintainable; · Impact insulation provided in the blanching area to prevent heat loss; · Ensure continuous supply of thermally processed fish raw materials and packaging area; · Provide water or steam connections and the possibility of draining overflow liquid or condensate and blanching liquid directly into the sewage system; Blanching power 600 kg per hour (If you need more, you can write, but send us the layout of the manufacture place.) Equipment for dosing fish raw materials in cans and packing cans - Equipment, (can dispenser for Hansa cans type), which provides a can sequential feeding to the raw material dosing area. Speed ​​min. 75 up to 90 cans/min. · Equipment that provides semi-automatic dosing of blanched fish raw materials in cans: manual placement of raw materials in the portioning area, mechanized portioning and mechanized dosing of the fish portion in a box. The operating speed of the line must be matched with the operating speed of the cans dispenser. Permissible deviation +- 4 grams Equipment for the accumulation of filled cans, which allows the accumulation of at least 2 min of packing capacity, min 150 cans; · Equipment that provides continuous weighing of cans with the possibility of diverting cans that are below the permissible deviation of the specified weight to the forgiving conveyor, and ensures the return of cans to the flow after the forgiving; · The equipment is easy to service and sanitary. · Number of employees servicing the equipment: 4 employees Automatic control unit - Provides automated equipment control and the ability to adjust the speed of equipment operation. ​Technical Maintenance & Stability: We provide expert maintenance, diagnostics, and spare parts availability to prevent unplanned downtime and ensure your lines run smoothly. Equipment: You can send separate parts if needed. 1- Fillet conveyor – 1pcs 2- Blanching conveyor line – 1pcs 3- Fillet dosing machine – 1pcs 4- Checkweigher – 2pcs 5- Can dispensing machine – 2pcs 6- Rotary table – 1 pcs Lhsdpfxev Dftxj An Iji 7- Conveyor line – 8pcs Uses The line is designed for blanched fish fillets. Automatic filling of blanched fish fillets into "Hansa" type cans and weight control with feeding to the capping machine.

Condition: used, mileage: 2,73,000 km, power: 200 kW (271.92 HP), first registration: 05/2019, fuel type: diesel, overall weight: 15,000 kg, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, airbag, cruise control, immobilizer system, power assisted steering, soot filter, traction control, trailer coupling, D6F Air conditioning, A1K Front axle 5.3 t, A2L Rear axle – ring gear 390, hypoid, 11.0 t, B1B Electronic brake system with ABS and ASR, B1D Electronic air supply unit – medium, B2A Disc brakes on front and rear axles, B4A Condensate monitoring for compressed air system, B5B Trailer brake – 2-line, C5I Mounting parts for flatbed body, C6Y Stabilizer, underframe, rear axle, C7E Front underrun protection (ECE), steel, C7H Side protection device, C8J Splash guards in wheel arches, C9N Pre-installation for subsequent equipment/body, D1C Driver's comfort suspension seat, D1M Passenger fixed seat, standard, D2V Armrests, both sides of driver's seat, D3Q Seat cover velour, driver’s seat, D3T Seat cover velour, passenger seat and center seat, D4B Classic cockpit, D4W Power windows on both sides, D5Y Rubber mats, driver’s and passenger sides, D6Y Pollen filter, D7L Overhead storage above windshield, single compartment, D7P Low storage tray on engine tunnel, D8A Roof hatch/ventilation flap roof, E0Y Battery cover, E5A Switch no. 1 for external body electrics, E6A Trailer socket 24 V, 15-pin, E7F Remote control for air suspension, E9H Preparation for tail lift control, F1P S-cab, F1X S-cab ClassicSpace, 2.30 m tunnel, F2U ClassicSpace, F5A Lockable air deflector, F5L Exterior sun visor, transparent, F6I Heated front mirror, F6J Electric main mirror, driver’s side, F7V Two-step cab entry, F8L Immobilizer with transponder, G1E Transmission G 140-8/9.30-0.79, G5G ., We are available by phone Monday to Friday until 8:00 PM and Saturdays until 4:00 PM!! Further information:!! Leasing/financing and trade-in possible!! !! !! - Subject to errors and prior sale!! - All information without guarantee ... more on our homepage Lhodpfsxnwl Djx An Isi

Condition: new, power: 390 kW (530.25 HP), fuel type: diesel, empty load weight: 12,611 kg, maximum load weight: 13,389 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,300 mm, next inspection (TÜV): 12/2026, brakes: retarder, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, Sleeper cab, Air suspension seat, Seat heating, Rear window, Electric mirrors, Electric window left, Electric window right, Air conditioning, Sun visor, Cruise control, Navigation system, Auxiliary heater, Air horn, ABS (Anti-lock braking system), Traction control (ASR), Retarder, Auxiliary drive, Differential lock, Fog lights, Rotating beacon, Leaf spring suspension, Trailer hitch with air and light connection, Aluminum tank, Tarp, Lashing eyes, Underrun protection, Tailgate, Sunroof, Green environmental badge Wheelbase: 3300 mm, Body: Meiller 3-way tipper body with tarp, 7.5t front axle, planetary rear axle 13.4t, ring gear 300, Electronic braking system with ABS and ASR, Disc brakes with full protection on front and rear axles, ABS can be switched off, Stabilizer bar on front and rear axles, Condensate monitoring for air system, electronic parking brake, secondary water retarder, paving machine package, waste heat recovery, smoker's package, hot water auxiliary heater, additional thermal insulation, reversing warning system, ClassicSpace, MirrorCam, Light and rain sensor, Comfort locking system, Off-road driving program, Mercedes PowerShift 3, PowerShift Advanced, Preparation for toll collection, Transmission oil cooler, Navigation system, Refrigerator, LED daytime running lights, High-performance engine brake, Air-conditioned driver's seat, Seatbelt monitoring, Multimedia cockpit interactive, Lashing recesses in the tipper body floor, Meiller 7-piston pump type 275, Auxiliary drive MB 131-2c pump. New vehicle from stock, registered on December 23, 2025! Lhsdpfozbvc Nex An Iji Loading height approx. 1580mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, Subject to changes, prior sale and errors!

Condition: like new (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 1,000 mm, Equipment: documentation/manual, SEPRO Success 11C (2023) Linear cartesian robot , 1500mm Number of axis: 3 X = 1500 mm Y= 500 mm Z= 1000 mm Payload: 5 kg Lhodpfx Anjx Dnc So Ioi Euromap 67 More information in photos of this robot, complete manuals available. SEPRO SUCCESS 11 – Technical Data (Summary) Robot type: Success 11 Serial number: R009519 Mechanics 1. Payload: 5 kg 2. Robot weight: 204 kg 3. Robot dimensions: 2430 × 1200 × 1570 mm 4. Max. pneumatic pressure: 7 bar 5. Air consumption: 140 l/min (normal), 260 l/min (peak) Stroke axes X-axis (horizontal stroke): 1. Stroke: 1500 mm 2. Speed: 2.0 m/s 3. Repeatability: ±0.1 mm Y-axis (horizontal take-out): 1. Stroke: 500 mm 2. Speed: 2.0 m/s 3. Repeatability: ±0.1 mm Z-axis (vertical): 1. Stroke: 1000 mm 2. Speed: 3.0 m/s 3. Repeatability: ±0.1 mm Rotations 1. R1 pneumatic rotation: 0–90° 2. R3 pneumatic rotation: 0–180° or 0–90° Control system – Visual 2 1. Weight: 43.5 kg 2. Dimensions: 550 × 400 × 295 mm 3. Power supply: 3×400–480 V ±10% 4. CPU: i.MX537 / Cortex A8 @ 800 MHz 5. Memory: 512 MB DDR + 512 MB Flash 6. SD card: 4 GB 7. I/O: 8. Robot: 16 inputs / 16 outputs 9. Cabinet: 7 inputs / 8 outputs 10. USB ports: 1× Master USB, 1× Slave USB 11. Ethernet 10/100 Pneumatics 1. 2 pneumatic circuits 2. Vacuum and pressure functions available Environmental conditions 1. Operating temperature: +5 to +40 °C 2. Storage temperature: –25 to +55 °C 3. Humidity: 30–95% (non-condensing) 4. Protection rating: IP22 / IK07 Options 1. PC Editor (Windows XP to Windows 7) 2. Conveyor control (3×42V AC to 3×550V AC) 3. Safety kit for access door 4. 1× conveyor

Condition: excellent (used), Keyence Model: VR-5200 Type: Measuring head Light Sources Light source for observation: LED ring light (red, blue, green) Light source for measurement: White LED Controller: VR-5000 Observation and Measurement Range Macro mode Magnification (based on a 15-inch monitor): 12×: Lsdpfx Anozimlpj Ishi Horizontal: 24.0 mm Vertical: 18.0 mm Magnification (based on a 15-inch monitor): 25×: Horizontal: 12.0 mm Vertical: 9.0 mm Magnification (based on a 15-inch monitor): 38×: Horizontal: 8.0 mm Vertical: 6.0 mm Magnification (based on a 15-inch monitor): 50×: Horizontal: 6.0 mm Vertical: 4.5 mm Micro mode Magnification (based on a 15-inch monitor): 40×: Horizontal: 7.6 mm Vertical: 5.7 mm Magnification (based on a 15-inch monitor): 80×: Horizontal: 3.8 mm Vertical: 2.9 mm Magnification (based on a 15-inch monitor): 120×: Horizontal: 2.5 mm Vertical: 1.9 mm Magnification (based on a 15-inch monitor): 160×: Horizontal: 1.9 mm Vertical: 1.4 mm Zoom: 1× to 4× Height Measurement Measurement resolution: 0.1 µm Height measurement range Without image stitching in Z Macro mode: 10 mm Micro mode: 1 mm With image stitching in Z Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without image stitching in Z 0.4 µm With image stitching in Z 1.0 µm Measurement accuracy Without image stitching in Z ±2.5 µm With image stitching in Z ±4.0 µm Width Measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measurement accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image Stitching Fully automatic measurement (automatic XY control + automatic Z focus), Automatic assignment, automatic area setting Measurable XY area 206 x 104 mm Object table XY travel: 184 × 88 mm (motorized) Z travel: 73 mm (motorized) Load capacity: 4.5 kg Working distance: 75 mm Image acquisition element 4-megapixel CMOS, S/W Transmitter lens Double telecentric lens x 2 Receiver lens Double telecentric lens Data processing Dedicated PC according to KEYENCE specifications (Operating system: Windows 11 Pro) Power connection Voltage: 100 to 240 V AC, 50/60 Hz Power consumption: Max. 200 VA Environmental resistance Ambient temperature: 15 to 30 °C Relative humidity: 20 to 80% RH (no condensation) Weight: approx. 28 kg (weight of the measuring unit only: approx. 11 kg) Distance extension object table Observation software VR-5000 Version 3.3.5.75 Image stitching module VR-H3J Creates a single large image from a series of images taken with the observation software. You will see color images. Analysis extension module VR-H3CA Expands the functionality of the analysis software. Can perform measurement comparison and 3D CAD measurement comparison. Condition: used Scope of delivery: (as shown in the pictures) (Changes and errors in the technical data, information provided are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, mileage: 4,86,696 km, power: 335 kW (455.47 HP), first registration: 03/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Vehicle No.: 174-26 Mercedes-Benz 1846 Actros, COC available! Registered: 03/2026 * Tipping hydraulics * Tires in good condition * German vehicle * Euro6 D Inspection possible during our opening hours, test drive by appointment! For export sales, a deposit will be retained and refunded upon receipt of the proof of delivery. Company logos or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the functionality of the extras. All information is without guarantee - errors, changes, typos and prior sale reserved. Ljdjzirb Nspfx An Iehi Vehicle descriptions are explicitly not guaranteed specifications. We refer to our terms and conditions and ask you to familiarize yourself with them. Special equipment: Axle load - measuring device, work lights, equipment package: air conditioning, CB radio, air horn, driver assistance system: turning assistant, cab: with air suspension, suspension: front springs 7.5 t, 2 leaves, vehicle without MirrorCam external mirror camera, vehicle without radiator grille, vehicle without aerodynamically shaped underbody panel, luggage compartment on rear wall above, transmission 12-speed - type: G 211-12, integral rear, fender 3-piece, fuel tank: 390 liters aluminum, left, cooler box / refrigerator, engine brake reinforced, auxiliary drive MB 131-2c, wheelbase variant 3850 mm, frame lowering without air spring residual pressure control, frame overhang 1050 mm, fifth wheel coupling, low maintenance, interface fleet management system, drawers under dashboard, seat cover / upholstery: co-driver's seat velour, seat cover / upholstery: driver's seat velour, seats in the cab: driver's seat comfort sprung seat, sun visor outside, storage flap outside left, socket 12V / 15 A in the co-driver's footwell additionally, socket 12V additionally, socket 24V in the co-driver's footwell additionally, preparation / switch for lift axle on trailer / semi-trailer, preparation for work lights on rear wall of cab above, preparation for roof strobe, front axle straight, curtain sleeper cab, oil cooler transmission Additional equipment: Emission standard EURO 6, storage compartment above windshield with lid, axle configuration: 4x2, front axle load 7.5 t, Actros 5, Actros cab L, approach / front mirrors heated, trailer electrical and brake connection low, trailer socket 24V / 15-pole, step to cab on the left, exhaust to the right outside, equipment package: Powertrain 2, batteries arranged side by side, differential lock rear axle, compressed air connection in the cab, compressed air tank steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic activation for driving lights (light sensor), cab: cab entrance fixed, cab: interior package chrome, cab: tilting device hydraulic, cab: L StreamSpace, 2.50 m, floor level, vehicle outline lights LED, suspension: leaf / air, power windows, vehicle without rear window, generator 100 A, regulated, speed limiter system, urea tank (AdBlue): 60 liters, rear axle with active lubrication, unregulated, rear axle bevel gear 440, body / structure: semi-trailer tractor, comfort bed below, comfort locking system, power steering pump electronically controlled, steering wheel with multifunction, air compressor 2-stage, air dryer heated, engine 10.7 liters - 335 kW R6 diesel (OM 470), engine variant OM 470, type of use: local transport, wheelbase not defined, ramp mirrors, waste heat recovery, disc brakes front and rear axles, key