Used Cordes Typ 65 for sale (9,426)

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Solar gas turbine Taurus 65 Solonox (6.3 MWe) ready for delivery. Package description: Taurus 65 8401S (6.3 MWe ISO), Solar RGB & Leroy Somer 6.3 kV generator. Year of manufacture: Package 2011; gas turbine and gearbox replaced with new units in 2022. Engine starts: 14 / Package starts: 399. Running hours (gas turbine & gearbox): 2,423 hours. Location: Spain – unit stored at our indoor, temperature-controlled facility. The genset is currently available in our Zaragoza warehouse. Inspections welcome at any time. Scope of supply: - Main package in container, including: • SOLONOX Taurus 65 gas turbine generator (T65) – 2,423 operating hours • 6,300 V alternator • Control panels • Fire detection module • Gas train • Air inlet filter • Air outlet duct • Oil cooler • Gas compressor • 2 x gas storage tanks • Gas compressor cooler - Control system: • On-skid TTS4 Control System (Siemens S7 based) Available documentation: - Official borescope inspection report carried out by Solar following shutdown - Alternator maintenance report Iodeytpbiepfx Acajtk - Official Solar certificate confirming replacement of gas turbine and gearbox with new units in 2022 - Official data sheet for the complete package Additional information: - Most recent power generation: end of 2023 - Preservation: stored indoors in temperature-controlled building - Delivery: immediate

Condition: ready for operation (used), Year of construction: 1994, operating hours: 28,000 h, functionality: fully functional, overall weight: 8,000 kg, power: 450 kW (611.83 HP), heating capacity: 450 kW (611.83 HP), smoke pipe connection diameter: 400 mm, temperature: 90 °C, total height: 1,900 mm, total length: 3,000 mm, total width: 1,800 mm, type of input current: three-phase, input voltage: 380 V, Equipment: documentation/manual, hot water, Automatic wood chip boiler with automatic fuel feeding. The combustion chamber was relined in 2023. Itjdpfx Aezp H N Uscaek

Condition: used, Year of construction: 2013, operating hours: 18,995 h, functionality: fully functional, machine/vehicle number: VH-20053, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, position of the milling head: mittig, spindle speed (max.): 3,500 rpm, spindle speed (min.): 50 rpm, table width: 1,050 mm, table load: 5,000 kg, table length: 2,100 mm, table height: 860 mm, total height: 3,500 mm, total width: 4,485 mm, total length: 5,550 mm, type of input current: AC, workpiece weight (max.): 5,000 kg, overall weight: 11,000 kg, control cabinet width: 600 mm, power: 25 kW (33.99 HP), control cabinet length: 1,275 mm, control cabinet height: 2,370 mm, Equipment: rotational speed infinitely variable, For sale is an MTE BF-2000 CNC bed-type milling machine, year of manufacture 2013, in very good condition with comparatively low hours of use. The machine is ideal for precise and heavy machining operations in mechanical and tool engineering. Thanks to its rigid bed construction and powerful spindle, large and heavy workpieces can also be machined reliably. The machine is well maintained, fully functional, and can be inspected by appointment. Further technical data and accessories are available on request. Control: Siemens 840D SL Spindle taper: SK50 (DIN69871) Iodpfx Acjytqdroaotk The quoted price is exclusive of dismantling, packaging, and shipping. Sale ex works; subject to prior sale. Machines are sold in used condition; any guarantee and warranty are excluded.

Condition: used, machine/vehicle number: 008005, Max width workable: 2440 mm Itjdpfx Aewu Aacjcaok

Condition: used, Year of construction: 2022, load capacity: 3,500 kg, lifting height: 4,340 mm, total length: 4,150 mm, Hersteller: Toyota Antrieb: Diesel Bedienung: Sitz Tragfähigkeit/Last 3500kg Lastschwerpunkt 500 mm Lastabstand: 495 mm Radstand: 1700 mm Achslast mit Last vorn/hinten kg 7260/1100 Achslast ohne Last vorn/hinten: kg 1710/3150 Reifentyp - Luft (P), Superelastik (SE), Vollgummi (R): SE Reifengröße vorn 250-15 Reifengröße hinten 6.50-10 Räder, Anzahl vorn/hinten (x = angetrieben) 2x/2 Spurweite vorn mm 106 Spurweite hinten mm 965 Neigung Hubgerüst vor/zurück a/b Grad 6/11 Höhe Hubgerüst eingefahren mm 2115 Sitzhöhe mm 1120 Kupplungshöhe mm 335 Gabelträger FEM/ISO 2328, Klasse/Typ A, B IIIA Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4185 Itedpfx Aoy Ihhxocaek Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4385 Wenderadius mm 2490 Kleinster Drehpunktabstand mm 745 Fahrgeschwindigkeit mit/ohne Last km/h 16,5/17,0 Hubgeschwindigkeit mit/ohne Last m/s 0,37/0,40 Senkgeschwindigkeit mit/ohne Last m/s 0,50/0,45 Max. Zugkraft mit/ohne Last N 17000/10600 Steigfähigkeit mit/ohne Last % 18 Betriebsbremse Hydraulisch Arbeitsdruck für Anbaugeräte bar 147 Ölstrom für Anbaugeräte l/min 65-80 Schalldruckpegel nach EN 12 053, Fahrerohr dB(A) 79

Condition: ready for operation (used), functionality: fully functional, We are selling this 4-roller sheet metal bending machine. Sheet width: 3150 mm Sheet thickness: 40 mm Machine weight: 93,000 kg Iodjzcp Axopfx Acaetk Upper roller diameter: 600 mm Minimum bending radius: 480 mm Bending speed: 6.8 m/min

Condition: like new (used), Year of construction: 2018, operating hours: 500 h, functionality: fully functional, LAGUN BM4RT Bed Milling Machine Manufacturer: Lagun Type: BM4RT Year of manufacture: 2018 Iodpfx Acjzmpydeajtk Condition: operational, used, like new Operating hours: 1650 h Spindle hours: 438 h Control system: Heidenhain iTNC 640 Video available. Further information upon request.

Condition: used, functionality: fully functional, On offer: ITALPRESSE Nuovo Program edge press – 3000 × 2000 mm, 9.5 t pressure The machine is used, has undergone a technical inspection, is fully functional, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. The machine's greatest advantage is the ability to apply pressure to components simultaneously in two planes, thanks to independently controlled vertical and horizontal cylinders. Its large working range and even pressure distribution enable precise gluing of frames, furniture carcasses, boxes, fronts, and other structural elements. Specifications: • Manufacturer: ITALPRESSE • Model: Nuovo Program • Year of manufacture: 2004 • Maximum working dimensions: 3000 × 2000 mm • Minimum working dimensions: 250 × 340 mm • Number of vertical cylinders: 2 • Number of horizontal cylinders: 2 • Type of cylinders: hydraulic • Total clamping force: 9.5 t • Cylinder control: independent for vertical and horizontal cylinders Itsdpfezivvwox Acajk • Control panel: suspended, mounted on an arm • Hydraulic unit power: 1.5 kW • Maximum working pressure: 150 bar • Width of clamping beams: 100 mm • Power supply: 400 V / 50 Hz • Weight: approximately 1200 kg • Overall dimensions: 340 × 95 × 260 cm (L × W × H, without the control panel arm) • Complies with CE requirements Applications: • Gluing of frames and frame structures • Assembly and gluing of furniture carcasses • Gluing of boxes, fronts, and other structural elements • Precise positioning of components before gluing • Simultaneous pressing of components in the vertical and horizontal planes Additional information: • The photos show the actual condition of the machine on offer • Free machine operation training at our company's premises • The price stated in the auction applies to export sales/intra-community supply with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We arrange transport with our MDD fleet or through external carriers • We assist in obtaining a lease or leasing loan • The cost of delivery depends on the destination and the method of machine transport

Condition: excellent (used), Year of construction: 2006, Dimension: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. Isdpezum Unefx Acastk The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1998, functionality: fully functional, turning length: 600 mm, turning diameter: 310 mm, spindle bore: 65 mm, spindle speed (max.): 4,200 rpm, torque: 192 Nm, overall weight: 3,900 kg, swing diameter over bed slide: 600 mm, bar passage: 65 mm, Equipment: rotational speed infinitely variable, The machine is powered on and can be inspected at any time by appointment. Isdpfx Ajzg U Itecajtk

Condition: refurbished (used), functionality: fully functional, rotational speed (max.): 1,750 rpm, rotational speed (min.): 1,450 rpm, Equipment: type plate available, Refurbished Landert motor Manufacturer: Landert Motoren AG Bülach Type 132S-RFA4A, 1450/1750 RPM, 400V, 50/60 Hz, 5.5 kW (Worm gear drive) Nameplate present Itsdpfxew Rn Hxo Acask Price negotiable Our asking price is €1,150.00 net, ex works, plus packaging costs. All technical data is subject to typographical errors and omissions. Sale is limited to countries within the EU.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Traub CNC turning machine TNC65DGY, TX8I, year of manufacture 2005, serial number 113* Y-axis on S1, V-axis, 2x C-axis, 2 rotating tool drives, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, parts gripper, without loading magazine. Iedpezfkbajfx Acajtk Very well maintained, in good condition, maintenance performed. Machine geometry has been checked and corrected/adjusted. Machines can be inspected while powered up – or a video is available. Approximately 4 weeks after order. Warranty of 6 months on main components as follows: Spindle bearing, ball screws, linear guides, clamping cylinders. The warranty expressly applies only to the replacement parts, not to downtime or labor time, or travel time. The warranty expressly does not apply to other parts than those mentioned above, e.g. wear parts, electrical components, electronics, hydraulics, etc.

Condition: good (used), Year of construction: 1969, For sale is a veneer press from Ott. The machine is in perfect working condition and can be inspected on site. Itsdpfx Asymmgiscaek Sale is on behalf of a customer. Machine location: Friedeburg area. Machine details: Pressing area: 225 cm x 120 cm Year of manufacture: 1969 Motor power: 12 kW Includes heating Emergency stop cable The machine has been repainted at some point

Condition: used, mileage: 3,12,000 km, power: 375 kW (509.86 HP), first registration: 08/2023, fuel type: diesel, overall weight: 21,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2027, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Additional information: * Payload: 12895 kg * Height: 3890 mm * Width: 2540 mm * Length: 5990 mm * Type | Front axle: Dunlop R * Tire size | Front axle: 385/65 R22.5 * Tire tread depth, inside left | Front axle: 70% * Tire tread depth, inside right | Front axle: 70% * Maximum axle load | Front axle: 8000 kg * Type | Rear axle: Dunlop R * Tire size | Rear axle: 315/70 R22.5 * Tire tread depth, outside left | Rear axle: 30% * Tire tread depth, inside left | Rear axle: 30% * Tire tread depth, outside right | Rear axle: 30% * Tire tread depth, inside right | Rear axle: 30% * Maximum axle load | Rear axle: 11500 kg * Wheelbase: 380 cm * Cabin: Yes * Price on request: Yes * Position | Front axle: Front * Brand | Front axle: Other * Brake type | Front axle: Disc brakes * Suspension | Front axle: Air suspension * Steering | Front axle: Yes * Alloy wheels | Front axle: Yes * Position | Rear axle: Rear * Brand | Rear axle: Other * Brake type | Rear axle: Disc brakes * Suspension | Rear axle: Air suspension * Reduction | Rear axle: Single reduction * Twin tires | Rear axle: Yes * Driven | Rear axle: Yes * Differential lock | Rear axle: Yes * Alloy wheels | Rear axle: Yes Additional features: * Adaptive cruise control * Airbags * Alcoa rims * Aluminum fuel tank * Fifth wheel coupling * Anti-lock braking system (ABS) * Traction control system (TCS) * Automatic climate control * Heated mirrors * Bluetooth * DAB radio * Roof spoiler * Differential lock * Double fuel tank * Dynamic steering * Electronic Braking System (EBS) * ESP (Electronic Stability Program) * Cruise control * Website Itedpfx Acezvk Hdjaek * Air conditioning * Refrigerator * Leather seats * Air suspension * Air-suspended front axle * Air-suspended seats * Fog lights * Radio/CD player * Sleeper cab * SemCollection * Side skirts * Sun visor * Spoiler * Auxiliary heater * Xenon headlights * Central locking Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire in advance about the costs and procedures for your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, power: 25 kW (33.99 HP), stroke length: 300 mm, throat depth: 500 mm, overall weight: 30,250 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Pilz, controller model: PSS 4000, working width: 6,100 mm, bending force (max.): 200 t, back gauge: 1,000 mm, distance between stands: 5,540 mm, installation height: 660 mm, control type: CNC control, degree of automation: semi-automatic, back gauge adjustment: CNC-controlled, actuation type: hydraulic, Equipment: centralized greasing system, documentation/manual, emergency stop, foot remote control, lower tooling, upper tooling, Lotze press brake, 6100 x 200t, regularly maintained, retrofitted in 2021 with Pilz PLC, type PSS 4000, large throat depth of 500mm, central lubrication, hydraulic clamping, central crowning system, pneumatic die shifting, segmented 300mm press blade, segmented lower die, for sale due to production changeover. Isdpfx Acsw Uykdeastk

Year of construction: 1992, operating hours: 100 h, condition: used, functionality: fully functional, Description Corner crimper for pressing profiles with a height of up to 68 mm. Extremely high pressing force achieved by a large-volume bellows cylinder (maintenance-free). The machine is easy to adjust and operate. Counter bearing pneumatically positionable with mechanical locking Support arms and pressing blades included as standard Two-hand operation for safe use Itsdpfxjx Rvl Rs Acask Options Additional support Special pressing blade Technical Data Pressing height: 68 mm Pressing force: 40 kN (4 t) Drive: Pneumatic Compressed air supply: 7 bar Air consumption per cycle: 30 l Dimensions (L × D × H): 650 × 820 × 1,270 mm Weight: 205 kg

Condition: ready for operation (used), Supfina Type 814 = 811-041.76:00-2 chuck SN:1110, used, normal signs of use, 100% functional, delivery as per photos. Ijdpfx Acozu Hfasastk

Condition: ready for operation (used), Supfina Type 814 = 811-041.76:00-2 Chuck SN:1111, used, normal signs of use, 100% functional, scope of delivery as per photos Itedpfezu Hfgsx Acajk

Condition: ready for operation (used), Year of construction: 2003, operating hours: 10,975 h, functionality: fully functional, spindle speed (max.): 5,000 rpm, center width: 600 mm, center height: 340 mm, controller model: Siemens Sinumerik 840D SL, TECHNICAL DETAILS Maximum turning height: 340 mm Turning diameter over bed: 680 mm Turning diameter over slide: 565 mm Distance between centers: 600 mm Spindle bore: 65 mm Spindle speed: 0–5,000 rpm Travel in X-axis: 260 mm Travel in Y-axis: 635 mm MACHINE DETAILS Control system: CNC Controller: Siemens Sinumerik 840D SL Power: 25 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,500 x 2,300 mm Weight: 6,500 kg Operating hours: 10,975 h Itedszuwx Dspfx Acaek EQUIPMENT Documentation CE marking CE certificate

Year of construction: 2017, condition: used, machine/vehicle number: 01142, Max. machining diameter: 42 mm, max. turning length: 300 mm, control system: FANUC Series 32I-Model B, filter unit, 1 left-hand bar feeder BARLOAD Vito, year of manufacture: 2017, serial number: 22171258, weight: 980 kg, right-hand conveyor belt, chip conveyor, without tools. Iedpjzqy Sxsfx Acajtk

Year of construction: 2017, condition: used, machine/vehicle number: 01147, 8-axis, max. machining diameter: 42 mm, max. turning length: 300 mm, with FANUC Series 32i-Model B control, conveyor belt, chip conveyor, filter and cooling unit, left-hand side BARLOAD Vito bar feeder, year of manufacture: 2017, serial no.: 22171425, HABOR oil cooler, without tools. Isdpszqy Tpjfx Acastk

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 4,000 mm, spindle diameter: 150 mm, Direct sell from production. Under power and ready for immediate use. It is in excellent condition. Additional photos and videos can be sent via WhatsApp upon request. Additional technical specifications are shown in the attached pictures. Itjdsy U T A Ispfx Acaok

Year of construction: 2008, condition: ready for operation (used), Main spindle: max. bar capacity: 65mm, draw tube bore: 75mm, collet holder diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Counter spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis counter spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X3 axis: travel: 165mm, max. speed: 40m/min, max. acceleration: 10m/s², nominal thrust (S1): 2400N. Z3 axis: travel: 678mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Y3 axis: travel: 80mm (+50/-30), max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Workpiece unloading (UA-WA): max. unloading weight: 4daN, max. unloading diameter: 70mm. Total number of tool stations: 12, tool holder diameter: 30mm, driven positions: 12, max. speed of driven tools: 4000/min, nominal torque (S1-n = 0/min): 17Nm, nominal power (S1-n = 4000/min): 2.9kW, control: Siemens 840D, operator panel: ErgoLine, screen: color TFT 19 inch, number of spindles (C-axes): 2, number of axes: 10, number of channels: 4. Operating hours: 70,035h power on, 48,657h in production, machine operates with cutting oil. With documentation and Bar Loader FMB Turbo 8-80 XT 3200. An on-site inspection is possible. Iodpfx Acoyln Ekeaetk

Condition: excellent (used), Year of construction: 2022, operating hours: 1,316 h, DMG Mori M1 milling machine (version with 12,000 rpm). Year of manufacture: 2022. Very good condition, inspected by DMG service. Low operating hours, only 1,316 spindle running hours. The machine can be connected and tested on-site. Iodpozr Rugefx Acajtk

Condition: used, Radial drilling machine REFORM, type RB 50-16 Year of manufacture: 2002 Drilling capacity in steel: max. 50 mm Tool holder: MK 5 Nominal overhang: 1600 mm Maximum overhang of the spindle to the column: 1600 mm Maximum overhang of the spindle to the column base: 1500 mm Minimum overhang of the spindle to the column: 340 mm Minimum overhang of the spindle to the column base: 240 mm Travel of the drilling head: 1260 mm Height adjustment of the arm: 600 mm Distance between clamping surface and drilling quill: max. 1100 mm Spindle speed: 25-2000 rpm Quill stroke: 300 mm Quill diameter: 80 mm Feed rate: 0.04 to 3.2 mm/rev (16 steps) Clamping surface of the base plate: 1750 x 980 mm (1650 x 840 mm) Column diameter: 350 mm Motor power, spindle drive: 4 kW Mains connection: 400 volts, 50 Hz - Spindle speed controlled via 16 gear stages with speed preselection and hydraulic gear shifting Itodpfx Aezupamjcaek - Right and left rotation of the drilling spindle - Automatic feed via 16 gear stages with feed rate preselection and hydraulic gear shifting - Electro-mechanical height adjustment of the arm, with hydro-mechanical arm clamping - Hydro-mechanical central clamping of the head and column via push buttons - Coolant system in the machine base Machine height with drilling head at the top: max. 2840 mm Space requirement L x W x H: 2400 x 1000 x 2650 mm Weight: 3.5 tons Good condition