Used Crash Protection Guardrail Crash Protection for sale (11,898)

Condition: good (used), The scope of delivery includes: 01x crash barrier, used f. Double rack rows Total length: approx. 2,500 mm Total height: approx. 400 mm Total depth: approx. 305 mm Consisting of each: 02x L collision protection corners, used Material color: orange Total height: approx. 400 mm Total depth: approx. 305 mm Total width: approx. 265 mm Material thickness: approx. 4.00 mm 01x U-rails, used Material color: orange Total length: 2,480 mm U-profile: 100 x 50 mm Oblong hole: 40 x 15 mm Material thickness: approx. 6.00 mm Your contact persons in our company: Bdsdovawqbepfx Apvsf Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,100 kg, maximum load weight: 28,900 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 1,060 mm, suspension: air, tire size: 435/50 r19.5, tire condition: 100 %, Additional information: Fine-grain steel welded construction, + Preload with light pretension in the neck area, turntable + with interchangeable 2 kingpins, outer frame slightly inclined, new design with Load-Lock profile for securing lashing straps, 24 tons, 2-speed support winch, single-sided operation, with straight lower section, without lateral thrust compensation. Note: Free support foot angle or free swivel radius to the rear approx. 1930 mm, extension ladder at the rear, door latch on the side, 2 support wedges with holder, side impact protection made of aluminum, under-run protection made of galvanized steel, quarter fender in front of the 1st axle and behind each axle, with anti-splash flaps according to EC, rear impact protection. SAF disc brake axles, axle/chassis laser-aligned to reduce tire wear and fuel consumption, air suspension. Bdodpfx Asi Ri E Hopvef 2-line compressed air brake system, color-coded lines for easy servicing, spring brake parking brake, 2 non-interchangeable coupling heads at the front, without connecting line, EBS, electronic brake system with EBS socket at the front, without connecting cable. Caution: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve, vehicle stability system. 435/50R19.5, manufacturer's choice, steel rims, factory silver. 24 volts, multi-chamber lights, yellow LED lighting on the side, 2 white position lights at the front, 2 white/red side marker lights at the rear, 2 x 7-pole non-interchangeable sockets at the front, without connecting cable. Floor: Sieve-printed panels approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle loads up to max. 7100 kg. Front wall/corner posts at the front: 2580 mm high, corner posts made of steel in a volumetric design, release mechanism for side tarpaulin on the front wall, crash blocker, at the bottom inside at a height of approx. 140 mm with steel impact protection. Center posts: 3 pairs of sliding posts that can be moved along the entire length, with 4-fold pockets and a long pocket at the bottom, 3 pairs of post positions. Sliding slats: 5 rows of wooden slats. Rear wall/corner posts at the rear: Corner posts at the rear made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal swivel locking mechanisms each. Tarpaulin: Tarpaulin with welded horizontal and vertical straps, tensioning buckles made of stainless steel. Roof: Sliding tarpaulin, rear end lift that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof rail for the automotive industry, internal width between the roof rails, approx. 2,490 mm, tarpaulin color: white, 400 roof non-elastic, minimal deflection of the roof rail during loading and unloading, optimal rain deflector at the rear, at the top of the end rail, above the doors, EcoLift - lifting roof can be raised by approx. 380 mm with gas spring support, 3 driving positions at the front: internal height at the front approx. 2900mm/2950 mm/3000 mm, set to approx. 3000 mm. Germany, test approval according to EC 2007/46, 24/7 service hotline, Fliegl manufacturer certificate for superstructure strength according to EN 12642 XL, prepared for single-row license plate holder, warning sign according to ECE - 70, reflective strips: white, continuously on the lower part of the side tarpaulin and at the top in the corn

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,200 kg, maximum load weight: 28,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,045 mm, tire size: 385/65 r22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Further information Fine-grain steel welded construction, kingpin plate with interchangeable 2-inch kingpin, slightly sloping outer frame, new design with Load-Lock profile for securing lashing straps, 24-ton capacity, two-stage landing gear, single-side operation, with straight lower section, without horizontal load compensation. Bodpoi Riy Tjfx Apvsdf Note: Free support leg swivel angle or free swivel radius to the rear approx. 1930 mm, extension ladder at the rear, door lock on the side, 2 wheel chocks with holder, Aluminum side impact protection, galvanized steel under-run protection, quarter panel fenders in front of and behind the axle assembly, with anti-splash flaps according to EG standard, rear impact protection. SAF disc brake axles with 430 mm disc diameter, axle/suspension laser-aligned to reduce tire wear and fuel consumption, air suspension. Two-line compressed air brake system, color-coded lines for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, without connecting line, EBS, electronic brake system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve, vehicle – driving stability system. 385/65R22.5, manufacturer's choice, steel rims, factory silver. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 2 x 7-pole tamper-proof sockets at the front, without connecting cable. Floor: Sieve-printed panels approx. 30 mm thick, mounted on longitudinal supports for high point load capacity for forklift axle loads up to a maximum of 7100 kg. Front wall/corner posts at the front: 2580 mm high, corner posts made of steel in a full-volume design, release device for side tarpaulin on the front wall, crash barrier, at the bottom inside at a height of approx. 140 mm with steel impact protection. Side supports: 3 pairs of sliding supports that can be moved along the entire length, with 4-fold insertion pockets and at the bottom with a long pocket, 3 pairs of support positions. Insertion slats: 5 rows of wooden insertion slats. Rear wall/corner posts at the rear: Corner posts made of steel at the rear up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal swivel latch locks each. Tarpaulin: Tarpaulin with welded horizontal and vertical straps, tensioning closures made of stainless steel. Roof: Sliding roof, rear lift that can be folded up, with the roof that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams, approx. 2490 mm, tarpaulin color: white, 400 Roof non-elastic, minimal deflection of the roof beam during loading and unloading, optimal rain strip at the rear, at the top of the rear crossbar, above the doors. Germany, test approval according to EG 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for structural integrity according to EN 12642 XL, prepared for single-row license plate holder, warning sign according to ECE - 70, reflective strips: white, continuously on the side tarpaulin at the bottom and at the top in the co

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 6 kg, maximum load weight: 28 kg, overall weight: 35 kg, axle configuration: 3 axles, loading space length: 15,030 mm, loading space width: 2,480 mm, loading space height: 4,060 mm, total length: 15,150 mm, total width: 2,550 mm, total height: 4,060 mm, suspension: air, tire size: 435/50R19,5, tire condition: 100 %, Additional information Chassis, semi-trailer, transport company Fine-grained steel welded construction, with preload for slight tension in the neck area, kingpin plate with interchangeable 2 kingpins X-tra Long, with an internal length of 15030 mm Outer frame slightly angled, new design with Load-Lock profile for attaching lashing straps 24-ton, 2-speed landing gear, single-side operation, with straight lower part, without thrust compensation Note: Free support foot angle or free swivel radius to the rear approx. 1930 mm Retractable ladder at the rear Door lock on the side 2 chocks with holder Aluminum side impact protection Galvanized steel under-ride protection Partial wheel arches in front of the 1st axle and behind each axle Rear impact protection Axles + Suspension Bjdpji Riwuefx Apvedf SAF disc brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Caution: The semi-trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle driving stability system AAC Basic, automatic lift axle acting on the last axle, as an aid for maneuvering, up to 20 km/h, can be manually switched off Axle load detection via EBS-Canbus signal, for display on the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels & Tires 435/50R19.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side coupled with the turn signal, flashing Side marker lights 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Floor Sieved plywood, approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg Front wall / Corner posts at the front 2580 mm high, corner posts steel in full volume design, release mechanism for side tarpaulin on the front wall, crash blocker, at the bottom inside at approx. 140 mm height with steel impact protection Center posts 3 pairs of sliding posts that can be moved along the entire length, with 4-fold insert pockets & at the bottom with a long pocket. 3 pairs of post positions Insert slats 5 rows of wooden slats Rear wall / Corner posts at the rear Corner posts at the rear steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-wing with 2 internal swivel latch locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Tensioning closures made of stainless steel Roof Sliding roof, rear end lift that can be folded up, with roof that can be slid from back to front, L-roof beam for the automotive industry, interior width between the roof beams approx. 2490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof beam during loading and unloading EcoLift - liftable roof by approx. 380 mm, on both sides, with gas spring support, 3 driving positions at the front: Interior height at the front set to approx. 3000 mm Optimal rain gutter at the rear, at the top of the end ra

Condition: good (used), Year of construction: 2016, 134 units, side protection / frame protection / impact protection / guardrail for pallet racking, single or double rows, Nedcon - used - : Price ex location: €95 / unit (net), dismantled, packaged and loaded! Manufacturer: Nedcon Model: Set Flank protection sigma 135deg Year of manufacture: 2016 / 2019 Type 1 (for single row): 6 units available Side protection sigma 135° L=1100mm Set Flank protection sigma 135deg L=1100 Bedpey Aixuofx Apvjdf Length: 120cm Height: 40cm Depth: approx. 22cm Weight: approx. 31kg Original price: approx. €205 (net) / unit Type 2 (for double rows): 124 units available Side protection sigma 135° L=2400mm Set Flank protection sigma 135deg L=2400 Length: 243cm Height: 40cm Depth: approx. 22cm Weight: approx. 41kg Original price: approx. €227 (net) / unit Condition: good – very good Available: immediately Location: Augsburg

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH CS-300, a bolted-type cement silo with a capacity of 300 tons, has been specially developed for high-volume concrete production plants. It offers maximum safety, durability, and efficiency, particularly in large-scale projects where cement storage is critical. The silo is easily transportable and can be quickly assembled on site thanks to its modular design. Its high-strength steel body ensures deformation-free use even under heavy working conditions. The CS-300 model comes standard with a maintenance platform between the legs, a cement filling line, internal and external manholes, safety guards, and special flange connections for the pressure relief valve. In addition, flanges suitable for installing an air filter and butterfly valve are located on the roof. All parts are manufactured using laser cutting and precision drilling technology to achieve a long-lasting structure. During the silo's production process, all static and mechanical strength calculations are performed using the “ANSYS Workbench CAE” analysis program. Thanks to the 140-micron-thick anti-corrosive and epoxy paint layers applied, the silo provides complete protection against corrosion and external factors. CS-300 - 300-Ton Cement Silo Technical Specifications Silo Capacity: 300 tons / 230 m³ Silo Height: 18,450 mm Silo Diameter: Ø 5,140 mm Number of Silo Feet: 6 Silo Weight: 22,000 kg Silo Foot Material: Ø273 x 10 mm steel pipe Silo Body Material: ST-37, 8-6-5 mm metal sheet Conical Part Material: ST-37, 8 mm metal sheet Conical Part Support Material: 200 mm steel C channel Filling Pipe: 4" steel pipe Internal and External Manhole: Available Maintenance Platform and Guardrail: Available Bdodpoxpi Ndsfx Apvof Why Choose the CS-300 Cement Silo? CONSTMACH CS-300 stands out not only with its high capacity but also with its safe and durable structure. Thanks to its European standard production process, quality control tests, and engineering calculations, it offers years of trouble-free use. Its wide range of equipment options and customizable structure provide customized solutions for every project. CONSTMACH guarantees maximum efficiency of your investment by providing professional support from installation to delivery. With its durability, safety, and engineering quality, the CS-300 is the right choice for large projects. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Sales from STOCK! Model: AMWP11.2-8100 Max. Working Height: 11.2 m Max. Platform Height: 9.2 m Max. Horizontal Reach: 3 m Up and Over Height: 7.89 m Guardrail Height: 1.1 m Overall Length: 2.53 m Overall Width: 1.0 m Overall Height (Stowed): 1.99 m Platform Dimension: 0.62 x 0.87 m Ground Clearance (Stowed): 70 mm Ground Clearance (Raised): 19 mm Wheelbase: 1.22 m Loading Capacity: 200 kg Occupants: 2 Turning Radius (Inside/Outside): 0.23 / 1.65 m Turret Rotation: 345° Jib Movement: 130° Travel Speed (Stowed): 4.5 km/h Travel Speed (Raised): 0.5 km/h Up/Down Speed: 42/38 seconds Max. Working Slope: X: 2.5° / Y: 2.5° Tyres: Ø 381 x 127 mm Driving Motor: 24 V / 0.9 kW Lifting Motor: 24 V / 3.3 kW Battery: 24 V / 240 Ah Bdsdeulakkspfx Apvef Charger: 24 V / 30 A Weight: 2950 kg AC Driving Motor Proportional Joystick Controls Self-Locking Gate Drivable At Full Height Non-Marking Tyres 4 x 2 Drive Automatic Braking System Emergency Descent System Tubing Explosion-Proof System Fault Diagnosis System Tilt Sensor Alarm Motion Alarm 345° Turret Rotation Horn Hour Meter Charging Protection System Flashing Beacon Drive Enable Charging Indicator Manual Brake Release Lanyard Attachment Point Tie-Down And Lifting Points Platform Load Sense System Emergency Stop Button Swing Out Components Cover

Condition: new, Year of construction: 2026, platform width: 810 mm, overall weight: 2,330 kg, empty load weight: 2,100 kg, transport length: 2,430 mm, transport width: 810 mm, transport height: 2,400 mm, fuel type: electric, color: red, The product is our own manufacture and is produced in our own factory. It is NOT chinese. Bedsyi Ag Rjpfx Apvedf DIMENSIONS Maximum Working Height: 7.8 m Maximum Platform Height: 9.8 m PERFORMANCE Maximum Lifting Capacity: 230 kg Extension Platform Capacity: 113 kg Gradeability: 25% Turning Radius (inside / outside): 0 m / 2.3 m WEIGHT Total Weight: 2,100 kg Standard Equipment Maintenance-free battery Proportional control Automatic braking system Travel alarm Emergency lowering system Extendable platform Safety maintenance support arm Tilt sensor Anti-roll-back protection Forklift pockets Horn Load sensing system Drivable at full height Foldable guardrails Flashing warning light Fault diagnostic system AC power supply on platform Optional Lithium-ion battery Our product is manufactured in our own facilities in compliance with European standards and is covered by a 2-year warranty.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,800 kg, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,480 mm, total length: 13,200 mm, total width: 2,550 mm, total height: 2,645 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to individual customer requirements. Chassis, Fifth Wheel, and Transport Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" kingpin, mounting position for warning signs at the rear, outer frame with "Load-Lock profile" for lashing straps, 24-ton capacity, two-speed landing gear, single-sided operation, lashing eyes, yellow marked, 2 of which are located at the rear as towing eyes, container locking: 4 pairs of container locking mechanisms embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, pocket recesses embedded in the outer frame, 80 x 80 mm internal dimensions, pocket recesses embedded in the center of the floor, 80 x 80 mm internal dimensions, plug-in crossbars B=80/ D=80/ L=1200 mm, hot-dip galvanized, lashing eyelets embedded in the outer frame, 5 tons each, 2 storage boxes b= approx. 1230 / h= approx. 450 mm, closed and mounted across the entire width in front of the axles, replacing side impact protection, front locking mechanism can be inserted as a pin, lashing/crossbar rails embedded transversely in the floor across the entire width to the outer frame, approx. 100 mm high, with 20 mm round steel rails, top and bottom, distance from top to bottom approx. 60 mm (of the round steel), with angle sheet at the bottom as a closure, open halfway downwards for lashing and inserting crossbars 80 x 80 mm, storage compartment for warning signs, open, as technically possible. Axles and Suspension SAF disc brake axles, "axles/chassis laser-measured" to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brake", 2 driving heights, can be switched over via hand knob: 1 x for saddle height 1120 mm 1 x for saddle height 1200 mm Braking System 2-line compressed air braking system, color-coded lines for easy maintenance, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, EBS, electronic braking system with EBS socket at the front, with lifting and lowering valve, vehicle - driving stability system Wheels and Tires 385/65 R 22.5", steel rims, factory silver Electrical System 24 Volt, 4 x 3-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable Rotating beacon with holder, switched via parking light (light can be removed) 2 pairs of warning signs double LED illuminated, extendable to 4500 mm and removable with plug. With additional holder at the rear Additional 7-pin socket (according to ISO 1724) in the underride guard at the rear Floor Sieve-printed panels approx. 30 mm thick, transverse impact protection with omega inserts, on longitudinal cross members for high point load capacity for forklift axle load up to max. 7100 kg Front Wall / Front Corner Posts 25 mm aluminum hollow profile, 1650 mm high, corner posts steel in volume design Front wall additionally covered with 1250 mm high sieve-printed panel on the inside Bdodjzb Iu Djpfx Apvjf "Crash blocker", at the bottom inside at approx. 140 mm height with steel ram protection Storage compartment for plug-in crossbars 80 x 80 on the inside of the front wall Painting Frame: Hot-dip galvanized including passivation or pa

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024288, empty load weight: 6,075 kg, maximum load weight: 32,925 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2019, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 50 %, color: blue, The images are archive photos! The vehicle may still be in use! Chassis Semi-Trailer Forwarder Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly sloped with "Load-Lock profile" for lashing strap attachment. Note! To attach the straps in combination with sideboards, the sideboards must be opened! 24t, 2-speed landing gear, single-sided operation, with straight base, without compensating slide Pull-out ladder at the rear Side door retainers 2x wheel chocks with holder Attention! Only Chassis No. 2024286 - 89: Pallet box for 30 Euro pallets (ground clearance approx. 220 mm) Underrun protection, galvanized steel Quarter-mudguards in front of and behind axle assembly Bodpjy Dfprofx Apvsdf With EC-compliant anti-spray flaps Rear impact protection Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, can be locked with a padlock (padlock not included) Axles + Suspension SAF axles "Axle/chassis laser aligned" reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, activated by "brake 3x" (starting aid functions up to a 30% axle overload and up to max. 25 km/h) Brake system 2-line compressed air brake system, color-coded lines for easy servicing. Spring-type parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raise & lower valve Vehicle stability control system Wheels and Tyres 385/65 R22.5, manufacturer at the manufacturer's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane control lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connection cable Front bulkhead / corner stanchions 2, 580mm high, steel corner stanchions in volume design, release mechanism for side curtain at the front bulkhead "Crash-blocker", internal steel impact protection at about 140mm height Center stanchions 3 pairs of sliding stanchions movable along the full length, with 4 insert pockets and a long pocket at bottom 3 pairs of stanchion positions Rear wall / rear corner stanchions Rear corner stanchions up to the lower edge of the roof, curtain attachment with round tube and ratchet tensioner Rear portal doors, two-leaf, each with two internal rotary bolt locks Tarpaulin Tarpaulin with integrated horizontal and vertical belts Tension latches made of stainless steel Roof Sliding roof, rear liftable end, can be slid from rear to front, tarpaulin color: white Optimized rain gutter at rear, on top of the rear bow, above the doors Operating instructions When assembling combinations, ensure compliance with the legally permitted overall vehicle height! If the total height exceeds 4,000 mm, please observe the following: The transport contractor is responsible for any resulting damages. The transfer agent must obtain permission according to § 29 StVO We assume no liability for the transfer of the vehicles. The images are archive photos! The vehicle may still be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34002026856, empty load weight: 5,592 kg, maximum load weight: 29,408 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", color: white, The images are archive images! The vehicle may be in use! Chassis: Saddle for trucking company Fine-grained steel welded construction in reinforced Scandic design, saddle plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock profile" for securing lashing straps Lashing rings for use in the "Load-Lock profile", 6 tons each, loose 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Free swivel radius to the support leg approx. 2200 mm, support leg dimension approx. 2350 mm 2 shims with holder Side impact protection, aluminum Under-run protection, galvanized steel Quarter panel fenders in front of and behind the axle unit with anti-spray flaps, only on the last axle 1 plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 pair of pole pockets recessed in the outer frame/floor at the very front, inner dimension 83 x 83 mm 2 steel poles, B=80/ D=80/ L=1200 mm, hot-dip galvanized Note: The pole pockets / insertion poles are not designed for the sole securing of long materials, pipes, etc. without lashing 4 pairs of lashing eyes, yellow marked Axles + Suspension 3 BPW drum brake axles "Axle/chassis laser-measured" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS brand Wabco Premium, electronic braking system with EBS socket at the front, without connecting cable, Wabco Premium incl. open CAN BUS for telematics Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Bdedpfx Apox Rq Sljvjf Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plate lighting in LED (Note! In certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Front panel / corner posts at the front 2 580 mm high, corner posts made of steel in a full volume design, release mechanism for side tarpaulin on the front panel "Crash-Blocker", at the bottom inside at approx. 140 mm height with steel ram protection Sliding battens Rows of wooden sliding battens Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tensioning devices made of stainless steel Floor Sieve plate approx. 30 mm thick, on longitudinal crossbeams for high point load capacity for forklift axle load up to max. 7100 kg Note: Floor deformation due to weather conditions possible (no guarantee)! Rear panel / corner posts at the rear Corner posts at the rear made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal swivel bar locks each Roof Sliding tarpaulin, rear lift that can be folded up, with tarpaulin that can be slid from back to front, tarpaulin color: white optimal rain gutter at the rear, at the top of the rear beam, above the doors Country of approval / plates Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the side a

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, Equipment: ABS, Equipment: * External roller 20 AR * Nova gray * 2-axle trailer chassis for containers * External roller version (20AR) * External reference length approx. 6,896 mm * Overall width approx. 2,500 mm * Ride height when loaded approx. 1,175 mm * Roller track length approx. 6,880 mm * Wheelbase 5,100 mm * Empty weight (complete) approx. 3,860 kg * Technical max. gross weight approx. 20,000 kg * Permissible gross weight approx. 18,000 kg * Payload approx. 14,140 kg * Suitable for containers from 5,000 to 7,000 mm length in accordance with DIN 30722. * Chassis with cross members, welded box section longitudinal members Bdsdjyv Ttcspfx Apvsf * Made of QSTE steel * 4 pneumatically operated container locks * Side underrun protection according to RL 89/297/EEC (closed design) * Turntable 980 FM including ball bearing slewing ring 90/1100/22 (low maintenance) * Drawbar 2600/980/100/30, inclined towing eye * Height adjustment (tension spring with turnbuckle) * Drawbar with DIN towing eye: inner diameter 40mm, outer diameter 110mm, thickness 30mm * 2 x 10 t axles for 19.5'' disc brakes, manufacturer brand as per choice * Brake disc diameter approx. 370 mm * Wheel connection with center centering according to DIN 74 361 Part 3 * Air brake system according to EU directive with Duomatik coupling head * Conventional air suspension * EBS type 4S/3M, electronic braking system with ROLL Stability * Double diaphragm spring brake actuators on rear axle * Release valve for separate disengagement of spring brake * 24 Volt full LED lighting system according to RL 76/756/EEC with multi-chamber tail light and integrated license plate light in lamp panel * 1 x 15-pin plug connection * 6 LED side marker/reflector lights with indicator function * 2 front white LED position lights * 2 separately mounted rear LED lane guidance lights * Regional traffic tires, tire brand as per choice * 8 x 265/70R19.5 (7.5x19.5) * Steel wheels, offset ET 138 * Wheel nuts unpainted * Incl. tire pressure monitoring * Aluminum underrun protection * Two vertical Delta crash protection profiles to protect the rear during loading/unloading * Accessories * 4 plastic mudguards, half-shell, front/rear, single wheel mudguards * 4 anti-spray mud flaps, neutral * 1 lockable plastic toolbox * 1 wheel chock with holder * 1 A-sign (waste transport placard) * 1 hanging net box * Chassis color: MB7350 Nova gray * Wheel hub color: black (KTL coated) * Rim color: RAL 9006 silver * Rear contour marking: red * Side contour marking: white * Closed SSE: RAL7001 silver gray * Rear panel/lamp panels: RAL7001 silver gray * Underrun protection: aluminum anodized (silver) * Locking hooks: yellow All information without guarantee. Errors excepted. Subject to prior sale.

Condition: new, Year of construction: 2024, Magni ES0807AC 7.8m electric scissor lift, 6 units available * Automatic tilt protection system on the undercarriage * Pinch protection * High ground clearance * Self-locking platform door * Speed limitation at maximum height * Electric steering system * Drivable at maximum height * Platform overload protection * Automatic braking system * Non-marking tires * Tilt indicator with alarm * Acoustic lowering signal and dual LED flashing light * Safety railing for maintenance work * Horn * Cylinder locking valve * Emergency stop button * Emergency lowering system * Drive motor protection * Anchoring points * On-board diagnostics system * Operating hour counter * Proportional control * Folding guardrail * Power supply on the platform * Maintenance-free battery * Motion alarm * Integrated front openings for forklift transport * Charging protection system * Charging indicator * Lifting and attachment points * One-sided platform extension * 2 drive wheels * 2 steering wheels * Manual emergency brake release Capacity: 230 kg Maximum number of occupants: 2 Working height: 7.80 m Platform floor height: 5.80 m Overall length: 1.86 m Overall width: 0.76 m Overall height (guardrail up): 2.15 m Transport height (guardrail down): 1.83 m Platform length: 1.67 m Platform width: 0.74 m Platform extension: 0.90 m Turning radius (outside): 1.64 m Bedpfxsxmqz No Apvjdf Drive motors: 2x15VAC/0.5 kW Lifting motors: 15VAC/3kW Speed (closed): 5.50 km/h Travel speed (open): 0.63 km/h Battery capacity: 24V Integrated charger, incline capacity: 25% Maximum working incline: 1.5°/3° Non-marking tires: 323×100mm Weight (EC): 1,630 kg Errors and prior sale excepted. Internal vehicle number: R52 WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: new, Year of construction: 2024, Equipment: all wheel drive, Magni ES1823RTP 18m working height scissor lift, suitable for rough terrain, fully electric * Automatic stabilizers for working at height * Standard oscillating axle * Self-locking platform door * Speed limiter at maximum height * Platform overload control * Automatic braking system * Tilt indicator with alarm * Acoustic lowering signal and double LED flashing light * Horn * Emergency stop button * Anchoring eyelets * On-board diagnostics system * Operating hour counter * Proportional control * Folding guardrail * Hoses with explosion protection * Motion alarm * Attachment and lifting points * Double extendable platform * 2 steering wheels * All-wheel drive * Weight-dependent lowering system * Emergency pump * Manual emergency brake release * Hydraulic oil cooling system Capacity 680 kg Max. persons 4 Working height 18 m Platform height 16 m Length 4.88 m Width 2.29 m Overall height (guardrail up) 3.19 m Transport height (guardrail down) 2.49 m Platform length 3.98 m Platform width 1.83 m Platform extension 1.43 m Ground clearance 30 cm Wheelbase 2.86 mm Transmission Electric Inner turning radius 2.35 cm Outer turning radius 5.20 cm Drive motors 32VAC/9kW Lifting motors 32VAC/15kW Closed speed 6 km/h Open speed 1 km/h Gradeability 40% Max. working inclination 2°/3° Batteries 48 V/450 Ah Charger 48 V / 60 A Hydraulic oil tank 120 l Tires 315/55/D20 Weight 8900 kg Errors and prior sale excepted. Internal vehicle number: R56 WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. Bdjdpfx Ajxl Nyuepvsf Whatsapp Whatsapp

Condition: new, Year of construction: 2024, Equipment: all wheel drive, Magni ES2223RTP 22m Electric Scissor Lift Megadeck - Automatic stabilizers for working at height - Self-locking platform door - Speed limitation at maximum height - Platform overload control - Automatic braking system - Non-marking tires - Tilt indicator with alarm - Audible lowering alarm and double LED strobe light - Safety bar for maintenance work - Horn - Emergency stop button - Emergency lowering system - Tie-down points - On-board diagnostic system - Hour meter - Proportional controls - Foldable guardrails - Power supply on platform - Explosion-protected hoses - Motion alarm - Charging protection system - Lifting and securing points - One-sided and automatic platform extension - All-wheel drive - 4-wheel steering - Load-dependent lowering system - Emergency hydraulic pump Capacity: 750 kg Max. persons: 4 Working height: 22 m Platform height: 20 m Length: 4.95 m Width: 2.46 m Overall height (rails up): 3.86 m Transport height (rails down): 3 m Platform length: 4.95 m Platform width: 2.25 m Ground clearance: 40 cm Wheelbase: 2,290 mm Inside turning radius: 2.15 m Outside turning radius: 4.85 m Drive motors: 4×32VAC / 3.3 kW Lift motors: 2×48VDC / 10.0 kW Travel speed (stowed): 5 km/h Travel speed (elevated): 0.40 km/h Bdedpfx Apexl Nybevjf Gradeability (max): 40% Operating inclination: 2°/3° Batteries: 48 V / 630 Ah Errors and prior sale excepted. Internal vehicle number: R58 WhatsApp support available! For questions about the machine or further information, feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: new, Year of construction: 2024, Magni ES1212AC 12m electric scissor lift, 6 units available. * Automatic tilt protection system in the undercarriage * Crush protection * High ground clearance * Self-locking platform door * Speed limitation at maximum height * Electric steering system * Operable at maximum height * Platform overload protection * Automatic braking system * Non-marking tires * Tilt indicator with alarm * Audible lowering signal and dual LED flashing light * Safety railing for maintenance work * Horn * Cylinder locking valve * Emergency stop button * Emergency lowering system * Drive motor protection * Anchoring eyes * On-board diagnostic system * Operating hour counter * Proportional control * Folding guardrail * Power supply on the platform * Maintenance-free battery * Motion alarm * Integrated openings for forklift transport * Charging protection system * Charging indicator * Lifting and securing points Bodpfoxmqtrox Apvedf * Single-sided platform extension * 2 drive wheels * 2 steering wheels * Manual emergency brake release Capacity: 320 kg Maximum number of occupants: 2 Working height: 12 m Platform floor height: 10 m Overall length: 2.48 m Overall width: 1.15 m Overall height (guardrail up): 2.49 m Transport height (guardrail down): 1.96 m Platform length: 2.27 m Platform width: 1.12 m Platform extension: 0.90 m Ground clearance (retracted): 10 m Ground clearance (extended): 1.9 m Wheelbase: 1.87 mm Turning radius (outside): 2.10 cm Drive motors: 2x15VAC/0.87 kW Speed (closed): 6 km/h Travel speed (open): 0.80 km/h Integrated charger: 24V/30A Climbing ability: 25% Maximum working inclination: 1.5°/3° Non-marking tires: 381×127mm Errors and prior sale excepted. Internal vehicle number: R72 WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. Whatsapp Whatsapp

Condition: used, total length: 10,300 mm, total height: 4,000 mm, shelf height: 4,000 mm, frame width: 900 mm, This package includes: 4 x uprights, 4m high x 90cm deep 12 x crossbeams, 330cm each including accessories and grating Results in a single row with 3 bays and 2 levels per bay, total length approximately 10300cm 400m available immediately! Manufacturer: Galler Type: Wide-span shelving Condition: used, good Height: 4 m Length: approx. 1 x 10.30 running meters Frame depth: 0.90 m Construction: Plug-in system Shelf load: 1200 kg per shelf Accessories such as: Bjdpfozavi Hjx Apvsdf Floor fixing Connectors Load warning signs Impact protection Guardrails Grated flooring Rear panel grating Depth stops Barrier railings and much more... Just ask us! Sales & Delivery Terms (B2B) - Prices & Logistics: All prices are quoted net ex warehouse. Express delivery via our own fleet is possible after individual agreement. - Offer Status: All offers are subject to change and non-binding. Subject to prior sale. - Reservation of Ownership: The goods remain our unrestricted property until full payment is received (no right of disposal or processing). - Warranty: Exclusive sale to commercial enterprises (§ 14 BGB). No warranty for defects in used and IIa goods. The respective manufacturer's warranties apply to new goods.

Condition: used, load capacity per storage section: 4,000 kg, total length: 3,600 mm, This package includes: 1 x IPE120x60 beam, 3,600 mm Manufacturer: SSI Schäfer Type: PR 600 Condition: used, good condition Beam length: 3,600 mm Height: 120 mm Bearing width: 60 mm Color: blue Bjdjzavh Aepfx Apvsdf Load capacity: 4,000 kg Accessories such as: Floor mounting Connectors Load warning signs Impact protection Guardrails Grating Rear wall grating Deep stringers Barrier railing and much more... Just ask us! Sales and Delivery Conditions (B2B) - Prices & Logistics: All prices are quoted net ex works. Express delivery via our own fleet is possible upon individual agreement. - Offer Status: All offers are subject to change and availability. We reserve the right to sell items prior to confirmation. - Retention of Title: Ownership of the goods remains with us until full payment has been received (no right of disposal or processing). - Warranty: Exclusive distribution to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for defects in materials is excluded. For new goods, the respective manufacturer's warranties apply.

Condition: used, load capacity per storage section: 3,000 kg, total length: 2,700 mm, total height: 100 mm, 1 x Traverse IPE100x50, 2,700mm Condition: used, good condition Traverse length: 2,700mm Height: 100 mm Bearing width: 50 mm Color: green Rated load: 3,000kg Accessories such as: Floor mounting Connectors Load warning signs Impact protection Guardrails Grating Bdedpozavg Esfx Apvef Rear panel grating Deep webs Barrier railings and much more... Just ask us! Sales & Delivery Terms (B2B) - Prices & Logistics: All prices are quoted net ex works. Express delivery via our own fleet is possible after individual consultation. - Offer status: All offers are non-binding. Subject to prior sale. - Reservation of ownership: The goods remain our unrestricted property until full payment (no right of disposal or processing). - Warranty: Exclusive distribution to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for defects in materials is excluded. For new goods, the respective manufacturer's warranties apply.

Condition: new, Year of construction: 2025, The machine is available immediately from stock. FRONTEQ Type: FS0610TL Load capacity: 230 kg Load capacity, platform extension: 120 kg Platform dimensions: 1.8 x 0.78 m Platform extension: +0.89 m Transport dimensions: 2.27 m x 0.96 m Height: 2.14 m Height with guardrails folded down: 1.67 m Weight (approx.): 1780 kg Working height: 8 m Platform height: 6 m Automatically leveling outriggers Retractable outriggers Bright, non-marking tires. Climbing capacity up to: 30° Overload protection: Drive via 24 V / 2 x 85 Ah battery Integrated 24 V / 36 A charger Bsdpfx Apshu A Dwsvjdf German operating manual included 2-year manufacturer's warranty The machine is also available without outriggers. Affordable financing options, such as lease-to-own or leasing, can also be offered. For further data, delivery time, and availability, please inquire. Depending on availability, the machine can be inspected and test-driven at our warehouse.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 4,935 h, load capacity: 2,000 kg, lifting height: 2,100 mm, free lift: 172 mm, fuel type: electric, mast type: duplex, construction height: 1,585 mm, fork length: 1,150 mm, drive type: Elektro, High-lift truck Load center: 600 Mast type: Duplex Technical condition: good Bdodpfx Apswqikyevsf Battery voltage: 24V Battery Ah: 210Ah Battery type: Lithium-ion Description: Prices are non-binding, ex stock, plus freight and VAT. No warranty/guarantee and no returns. Viewing possible by arrangement. Our general terms and conditions apply. Manually foldable platform with guardrail, standard hydraulics, control 10km/h, PIN code, finger protection plexiglass, E-bar, 1 piece PC/TC holder, scanner holder, voltage converter 24V/12V, fork tandem rollers, drive premium support wheel single, premium, small battery compartment, side change, fixed battery locking

Condition: used, machine/vehicle number: WFDFLT33902030059, empty load weight: 7,452 kg, maximum load weight: 27,548 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", color: black, The images shown are archive images; the vehicle may still be in use! Weights and Dimensions: Permissible / technical gross weight: 35,000 / 39,000 kg Permissible / technical payload approx.: 27,548 / 31,548 kg Permissible / technical aggregate load: 24,000 / 27,000 kg Permissible / technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 7,452 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Bedswk Dc Ropfx Apvsdf Overall height approx.: 4,005 mm Internal length approx.: 13,460 mm Internal width approx.: 2,470 mm Internal height front approx.: 2,655 mm Internal height rear approx.: 2,853 mm Volume approx.: 92 cbm Fifth wheel height approx.: 1,130 mm King pin installation dimension approx.: 1,640 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer for Forwarding Fine-grain steel lightweight welded construction, up to the landing legs, fifth wheel plate with replaceable 2" king pin. Prepared lashing rings integrated into the floor (max. 13 pairs) 24-ton two-speed landing gear, single-sided operation, straight lower part, without load equaliser Pull-out ladder at rear Door retainers on the sides Wheel chocks with holder Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mud flaps Foldable fender for lighting unit Quarter shell mudguards Rear impact protection Axles & Suspension BPW disc brake axles Air suspension 1st axle with automatic lift axle, including forced lowering and start assist, activation via triple brake application Brake System Two-line compressed air brake system Colour-coded line routing for easier servicing Spring-loaded parking brake Two fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at the front, no connecting cable Wheels 385/55 R22.5" Electrics 24 volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connecting cables SB Hydraulics Hydraulic cylinder with sliding unit integrated in the floor. Dual-circuit hydraulics. Note: A dual-circuit hydraulic system is required! Recommended pump capacity: Capacity: 110 l/min Pressure: 250 bar Min. oil tank capacity: 100 l SB Tipper Body Aluminum box-type tipper body made from high-grade, wear-resistant material. Front and side walls made from aluminum hollow sections, welded with a wide special reinforcement profile around the top and a special reinforcement frame at the bottom. Sliding bulkhead for improved unloading of cargo, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow sections as a two-leaf door, split 1/2 to 1/2, framed all round with a special U-profile with stop and rubber seal, fitted with two external rotary bar locks, locked at top and bottom. Rear wall with mechanical safety lock, operated at the rear on the left side in direction of travel. Including a swivelling crossbar at the top. Standing platform with ladder access on both sides (left/right in direction of travel) and guardrail for opening and closing the roof tarpaulin Removable, swivelling crossbars for tarpaulin support + tarpaulin support at front bulkhead and at rear wall. Roll tarp can be stored on one side with two longitudinal tension belts, 3 ratchet tension belts on the side. The tarp is fastened with hooks and rubber ropes at the front bulkhead and above the rear doors; features

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 2,500 h, control type: CNC control, controller manufacturer: Beckhoff, laser type: fiber laser, laser source model: MaxPhotonix, laser hours: 1,700 h, laser power: 12,000 W, sheet thickness (max.): 40 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,500 kg, input voltage: 400 V, type of cooling: water, overall weight: 10,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber laser for sale: Machine: Songu Mach 3015 Year 2023 - Put into operation 2024 Power: 12kW MaxPhotonix laser source Size: 3x1.5m Working area Working Hours: Total run time - 105days (2520h), Total NC run time 73days (1752h) Operating system: Beckhoff PLC operated from Windows 10 CAM system: Lantek CAM, postprocessor for the machine. Easy to use and conventient. Gas system: Hoerbiger with 3 gas inlets (O2, N2 and compressed air 16BAR/Or anything else) Fully enclosed and with CE marking Safety systems: Opening the door stops the machine and changing table light barriers stop the table changing process (does not stop the machine while working) Table changer: Hydraulic table changer with two pallets. Pallets in the machine remain in the same height, tables are chain driven. Hydraulic liftin capacity 1410kg Alpha direct drive servo drivers for axises with Alpha reducer gears. Laser head: Precitec ProCutter2.0 - spares and consumables available in EU Automatic lubrication of axises and guideways Fume extractor: Donaldson - has big panel filters with automatic cleaning function. Starts when machine starts cutting. Laser frame has sectioned fume extraction system - flaps open up where the laser head is moving. Positioning speed: 100m/min, acceleration 2.4g Accuracy: Positioning +-0,05, Repositioning +-0,03 Weight: Main frame ~8800kg, loading table ~2500kg Camera inside the working area Side access from two doors, front access Elecrical cabinet mounted to the machine Cuts materials like: Mild steel, stainless, aluminium, copper, brass. Example, 20mm mild steel - cutting speed 4m/min (O2), 3mm cutting speed 28m/min (N2) High pressure air compressor: 16Bar compressor for Air cutting, cheaper function for cutting mild steel Uses NC code for cutting, part size is determined from NC and cutter compensation parameter that can be changed from the machine Machine cutting parameters - Fly cut, film burn, small contour, etc. One single parameter consists of 9 different adjustable parameters. Option for nozzle cleaning while cutting and programmable nanojoints (extra small breakaway point for part removal) Automatic focus control Automatic sheet location measuring system Part Stop, Contour Stop, Crash sensor, Low pressure sensors, etc MDI mode for simple sheet trimming funcion Bdjdpfxoyk Uuio Apvjf Machine bed protected from heat Waste trolleys under the main cutting area and loading table Graphical visualisation on cutting plan Alarm log files Under power, can be tested Location: Tallinn Estonia

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,700 h, travel distance X-axis: 3,080 mm, travel distance Y-axis: 1,555 mm, travel distance Z-axis: 100 mm, overall weight: 15,000 kg, total height: 2,250 mm, product length (max.): 11,000 mm, This 3-axis LVD Electra-FL 3015 was manufactured in 2015 and features a 4kW fiber laser by Rofin/Coherent. It includes automatic shuttle tables, a cutting head with lens systems, and automatic functions for nozzle cleaning, height calibration, and gas selection. The machine supports a maximum sheet size of 3050 x 1525 mm and offers high-speed positioning. If you are looking to get high-quality cutting capabilities, consider the LVD Electra-FL 3015 machine we have for sale. Contact us for more information. • Production Hours: • Machine: 15700 hours • Lasersource Laser On Time: 9980 hours • Type: Sinumerik 840Dsl / B&R APC 910 • Operating System: Windows® 7 Embedded • Memory Capacity: 4GB RAM / 60GB SSD • Screen: 19” LCD Touch Screen • Network Card: 1Gbit/sec RJ45 Connection • USB Interface: 2 x USB 3.0 on Front Panel • Max. Positioning Speed X-Y: 170 m/min • Max. Positioning Speed Z: 30 m/min • Smallest Programmable Increment: 0.01 mm • Positioning Accuracy: 0.05 mm • Repeatability Accuracy: 0.025 mm • Maximum Sheet Size: 3050 x 1525 mm • Maximum Sheet Weight: 700 kg • Automatic Shuttle Tables • Cutting Head with 5” or 7.5” Lens System • Automatic Nozzle Cleaning and Height Calibration • NC-Focus, Automatic Focal Point Adjustment • Cutting Head with Crash-Protection System • Capacitive Height Sensing • Automatic Cutting-Gas Selection: Oxygen, Nitrogen, Air • Automatic Gas Pressure Control with Servo Valve • Automatic Sheet-Referencing (Laser Eye, Capacitive System) • High Pressure Nitrogen Cutting Bjdpfx Aex D En Eepvjdf • TPC Total Power Control, Adapting the Laser Power Relative to the Speed • Chiller & Extraction Filter Included • Light Guards Protecting the Area Around the Shuttle Tables • 19” Touch Screen with New User-Friendly Touch®-L Interface • Automatic Start-Up / Shut Down • Tele-Service Available • Built According to the European Safety Regulations Provided with CE-Mark • Automation Ready Dimensions Machine Depth 4895 mm

Condition: new, Year of construction: 2026, load capacity: 200 kg, lifting height: 5,900 mm, empty load weight: 915 kg, Scissor lift for rough terrain – aerial work platform with tracked undercarriage and automatic outriggers. Available immediately from stock. FRONTEQ Type: FS0407T Load capacity: 200 kg Platform dimensions: 1.25 x 0.7 m Platform extendable by + 0.6 m Transport dimensions: 1.32 m x 1.08 m Height: 2.07 m Height with guardrails folded down: 1.48 m Weight approx.: 915 kg Working height: 5.9 m Platform height: 4.39 m Climbing capacity up to: 25° Overload protection: Drive via 24 V / 115 Ah battery Integrated 24 V / 20 A charger 230 V power supply to the platform Bdodpogxpmlsfx Apvsf Bright, non-marking tracks German operating manual included 2 years manufacturer's warranty Thanks to the tracked undercarriage and low weight, the platform can be easily loaded and transported using suitable ramps, for example, with a Sprinter van or a standard trailer. No special trailers, etc. are required. Other sizes with wheel and track drive are available. For further data, offers or availability, please inquire. Due to EU regulations, the offer is exclusively directed to commercial enterprises. The machine can be inspected and test-driven at our warehouse. Subject to prior sale. All information without guarantee. The machines can be picked up by the customer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be arranged by us. The shipping costs are an estimate and may vary depending on the distance and unloading possibilities; please inquire. The stated selling price is a net final price plus VAT. An invoice with VAT will be issued. Manufacturer's warranty 2 years: spare parts are partially available from our stock. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of § 13 BGB. If the buyer acts as an entrepreneur within the meaning of § 14 BGB, any warranty is excluded. If the offered items are new, the warranty period is 24 months if the buyer acts as a consumer within the meaning of § 13 BGB. If the buyer acts as an entrepreneur within the meaning of § 14 BGB, the warranty period is 12 months.