Used Demag Crane System for sale (37,385)

Condition: ready for operation (used), functionality: fully functional, outer diameter: 3,500 mm, usable tank capacity: 50,000 l, TECHNICAL DETAILS Number of silos: 2 Fpsdpfxey Hiuwj Aa Nog Gross volume: 50 m³ Cylinder diameter: 3,500 mm Cylinder height: 5,000 mm Discharge diameter: 200 mm Roof shape: Conical 15° Cone-shaped floor, apex angle: 60° EQUIPMENT Lifting lugs Hinged manhole, 600 mm diameter with safety grid Mount for pressure/vacuum relief DN80 PN10 nozzle for filling line Nozzle with blind flange Nozzle for overflow Nozzle for level switch

Condition: used, Electric chain hoist crane DEMAG type PK1N-F Serial No. 1498030 Load capacity: 125 kg Hook travel: 4 meters Distance from suspension to load hook: 410 mm Lifting speed: 8 m/min Fine lifting speed: 2 m/min Pendant cable length: approx. 1.1 meters Power supply: 380 Volt, 50 Hz 1 chain fall = 125 kg - Emergency stop Fsdpjyy Df Rofx Aa Nspg Weight: 20 kg Good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, Slewing crane Demag Outreach: 5000 mm Height: 3300 mm Load capacity: 500 kg Max. lifting height approx. 240 cm TÜV valid until: 2026 Fsdex Rn T Hopfx Aa Njpg

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, The Lamina Gluer is a manual fed in-line folding, gluing and taping machine. In very good technical condition, after total renovation. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc. Machine in is at our premises, testing on-site is possible. Max Sheet Size: Width: 2200 mm (87") Min Sheet Width: 70 mm (3") Electrics: 208 V, 3 phase, 60 cycle; or 400 V, 3 phase, neutral, 50/60 cycle; or Specified Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 50 L/min Fpodpfxsyzfkke Aa Nog

Condition: good (used), Year of construction: 2014, Manufacturer: DEMAG Load capacity: 860 kg + 630 kg (equipped with two cranes) Exact technical dimensions are shown in the pictures. Fjdpfx Aaoyu R Dzo Nspg The crane runway can be extended using the structures and supports shown in the pictures; however, additional track elements are required for the extension, which are not available!!

Condition: excellent (used), DEMAG wheel motor 36/20 K6P for electric wire rope hoist P1600 optionally with coupling and brake disc Type 36/20 K6P, motor in good tested condition Fsdpev Uai Asfx Aa Nepg Armature / rotor / runner, bearing end shields, coupling, brake also available separately P2000 drum shell, rope drum, rope guide

Condition: ready for operation (used), Year of construction: 2008, operating hours: 57,628 h, clamping force: 800 kN, screw diameter: 35 mm, injection weight: 149 g, This DEMAG SYSTEC 80/420-310 was manufactured in 2008. It features a clamping force of 800 kN and a screw diameter of 35 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine includes a Wittmann linear robot and a Gravimax 14R gravimetric blender. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG SYSTEC 80/420-310 hydraulic injection moulding machine we have for sale. Contact us for further details. • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450°C • Tie bar distance: 420 mm • Injection unit: 310 • Control system: CDIAS / NC5 • Total operating hours (SPS): 108,544.0 h • Drive operating hours: 57,628.7 h • Heating operating hours: 73,426.7 h • Total cycle counter: 5,058,031 Fpsdpsyyyuujfx Aa Nog • Voltage: 400 V • Frequency: 50 Hz • Current: 114 A • Max pressure (Pmax): 235 bar • Max flow (Qmax): 104 l/min • Installation height of the tool: 300 mm • Maximum distance between tool mounting plates: 750 mm • Availability: Mid 2026 Additional equipment • Wittmann linear robot (Handling/Robot) • Gravimax 14R gravimetric blender • TORO-systems material loader

Condition: new, Year of construction: 2026, functionality: fully functional, Commercial Refrigerators & Freezers – New / Excellent Condition – Various Models I am offering several commercial refrigeration and freezer units for sale – ideal for supermarkets, kiosks, restaurants, or cafés. Available models include: - Plug-in island freezers (various sizes) - Multideck display refrigerators (open and with glass doors) - Upright refrigerators - Deli display counters - Top mount chillers / freezers Features: ✔ Energy efficient (R290 refrigerant) ✔ Temperature ranges depending on the model (e.g. -18°C to -22°C / 0°C to +5°C) ✔ LED lighting ✔ Large display area ✔ Quiet operation ✔ Ideal for commercial use Condition: New / very good condition (depending on the unit) Fpjdpfx Aaoy E U Elo Njg Price: Negotiable (depending on model and quantity) Viewing & collection: Possible by appointment If you're interested, please get in touch – I'll be happy to provide further details, dimensions, and prices for each unit.

Condition: ready for operation (used), Year of construction: 1999, clamping force: 1,500 kN, screw diameter: 45 mm, injection weight: 320 g, This 3-axis DEMAG ERGOTECH 1500-840 was manufactured in 1999. It features a clamping force of 1500 kN and a screw diameter of 45 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine has a maximum pressure of 190 bar and a stroke volume of 358 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH 1500-840 hydraulic injection moulding machine we have for sale. Contact us for further details. • Stroke volume: 358 cm³ • Materials processed: PA, PP, PE, ABS, etc. • Cylinder temperature: up to 450 °C • Max pressure: 190 bar • Max flow (Qmax): 114 l/min • Power supply: 3x400 V • Frequency: 50 Hz Fsdpoyyyn Uofx Aa Nepg • Total connected load: 78.3 A • Motor load: 41.0 A • Heating load: 37.3 A • Pump load: 41.0 A • Machine weight: 7.7 t • Year of production: 1999 • Availability: Mid 2026 Additional equipment • Handling system: Wittmann linear robot • Wittmann W621 (1999) • X-stroke: 550 mm • Y-stroke: 1200 mm • Z-stroke: 2000 mm • Weight: 300 kg • Wittmann W633 • Robot No: W633 • X-stroke: 500 mm • Y-stroke: 1400 mm • Z-stroke: 2000 mm • Weight: 475 kg • Wittmann W743 • Robot No: W743 • X-stroke: 1200 mm • Y-stroke: 2000 mm • Z-stroke: 4000 mm • Weight: 835 kg • Connected load: 18 A / 12.5 kVA • Voltage: 400 V

Condition: excellent (used), DEMAG Chain Hoist Type PK 2N-F Fpedeyy S Tiepfx Aa Nsg Stock number (1221) Lifting capacity 500 kg 2 lifting speeds: 5/1.25 m/min. 380 Volt 2.2 / 1.5 Ampere Lifting height 4.5 meters

Condition: used, Low-priced from company liquidation Fodjyyarmspfx Aa Nopg

Condition: used, Year of construction: 2008, operating hours: 5,281 h, * Type: Demag DF 65P * Year of manufacture: 2008 Fsdey Hblhjpfx Aa Njpg * Power: 52 kW -----Internal vehicle number: 10326----Errors and prior sale excepted. WhatsApp support available! If you have questions about the vehicle or require further information, feel free to contact us conveniently via WhatsApp. Whatsapp German, English -- Whatsapp German, English, Arabic

Condition: good (used), functionality: fully functional, Year of construction: 2002, total height: 3,500 mm, total length: 3,000 mm, load capacity: 2,000 kg, We offer this used Demag ZSL 2000-4/3.5 jib crane, year of manufacture 2002. Load capacity: 2000 kg Column height: 3500 mm Jib length: 3000 mm Fedpfxoy Ewlno Aa Nopg Type: ZSL 2000-4/3.5 Year of manufacture: 2002 Factory serial number: 56298606-001 The pillar crane can only be sold WITHOUT chain hoists. The crane is in good condition for its age, although it does show various signs of use. It was in use and tested without faults up to the most recent operation. If you have any questions or require more information, please feel free to send us a message or call us.

Condition: used, Demag Ergocontrol IBED NC4- removed from Demag Ergotech El-Exis S 60/370-310 - removed from running machine Fpsdpfx Aaeyxg Sws Njg - 1 cover missing - no effect on functionality - fully functionalmanufacturer: Demag type: NC4 spare part no.: 89380065 manufacturer no.: DIf the spare part is traded in an exchange procedure, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note based on the condition or age of the returned part. The defective part must be in a repairable condition; the credit note will be issued after feedback from the manufacturer.

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 6 -Connector: 16-pin -Crane remote control: 2 steps below the switch each Fpedsxzqp Aopfx Aa Nsg -Transport dimensions: 870/360/H140 mm -Weight: 6.1 kg

Condition: used, Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Handover: in its current condition as seen, see photos -Condition: Switching elements are missing, see photos -Manufacturer: Demag, control switch for crane remote control with cable -Type: DSE -Connector: 16-pin -Transport dimensions: 600/330/H140 mm -Weight: 3.5 kg Fsdpfx Aoxzq Sqja Nepg

Condition: ready for operation (used), Year of construction: 2005, clamping force: 5,000 kN, screw diameter: 70 mm, injection weight: 1,230 g, This 3-axis DEMAG Erdotech 500-3300 hydraulic injection moulding machine was manufactured in 2005. It features a screw diameter of 70 mm and a shot weight of 1,230 g. The machine has a maximum daylight of 1,450 mm and includes a handling system with a Wittmann linear robot. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Erdotech 500-3300 machine we have for sale. Contact us for further details. • Distance between tie bars: 900 mm Fpedpoyycu Dofx Aa Nsg • Min. mould installation height: 400 mm • Max. daylight (distance between platens): 1,450 mm • Centering ring: 160 mm • Core pull: 2-circuit core pull control (plus 1 extra core pull mentioned) • Control system: Demag NC4 Additional equipment • Handling unit: Wittmann linear robot, 3 axes (X/Y/Z linear) • Granule feeder: Wittmann, Typ VITMAX A312-Y (24 V, 1 A) • Hot runner controller: Gammaflux, Typ GM1G030F012S4EJ

Condition: good (used), Year of construction: 2011, functionality: fully functional, travel distance Z-axis: 1,500 mm, Equipment: documentation/manual, Number of axis: 3 Reach: 1500 mm Payload: 5 kg Fpedjyfhw Hjpfx Aa Njg X=420mm Y=1200mm Z=1500mm c= 0-90 pneumatic

Condition: ready for operation (used), approx. 120 pieces = 480 running meters of safety conductor rails Number of conductors / number of poles: 5 in standard lengths of: 4 m Busbar cross section: 10 mm² for mains voltage up to: 500 V Load capacity at 100% ED: 60 A Fsdpfx Aasd Hurbj Nepg Weight per meter: 2.1 kg

Condition: used, table length 2400 mm table width 1200 mm table height 200 mm bore 28 mm 100 x 100 mm material thickness ca. 24,5 - 27 mm 200 mm work height max. 850 mm Weight 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >. Fedpfx Aasyxhhyo Nopg - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: MIKA Seilzüge, 1x Demag DR wire rope hoist crane Due to numerous inquiries - Price is per unit! Fpjdpfx Aaey D D S Se Neg 5 units available, see listing below: 1x Demag wire rope hoist EKDR-Pro3 NL1600Kg/1.6t, serial number 96656002, 4M, hook path/lift 12m! – double reeved, year 2015 1x Demag wire rope hoist EKDR-3 NL1600Kg/1.6t, serial number 96656701, 2M, hook path/lift 12m! – double reeved, year 2015 1x Demag wire rope hoist EKDR-3 NL1000Kg/1.0t, serial number 96305549, 4M, hook path/lift 12m! – double reeved, year 2012 1x Demag wire rope hoist EKDR-3 NL1000Kg/1.0t, serial number 96305548, 4M, hook path/lift 12m! – double reeved, year 2012 1x Demag wire rope hoist EKDR-3 NL1600Kg/1.6t, serial number 96305550, 4M, hook path/lift 12m! – double reeved, year 2012 Each with 2 lifting speeds, lifting height 12m, trolley gauge adjustable Each hoist supplied with pendant control and power supply plug Total weight approx. 300 kg, connection to 400V 50Hz Very good condition, see photos Item location: 75053 Gondelsheim Shipping available, please inquire with your postal code

Condition: good (used), For sale is a used overhead crane / gantry crane with a lifting capacity of 3.2 tons, including a heavy-duty steel structure (crane runway made of wide-flange beams). The system has been professionally dismantled and is immediately available. The condition is used, fully functional, and complete. _____ ⚙️ Technical Data • Type: Overhead Crane / Gantry Crane • Manufacturer: Demag • Lifting Capacity: 3,200 kg • Hook Height: approx. 4 m • Span: 8,380 mm • Runway Length: approx. 5 m • Clearance: suitable for lorry transit underneath • Crane Runway: Steel structure made of wide-flange beams (260 mm) • Hoisting Unit: electric (chain hoist with trolley) • Condition: used, dismantled • Documentation: crane logbook available _____ 🏭 Condition & Features • Robust industrial design • Complete crane runway including columns available • Electric chain hoist with running trolley present • Suitable for workshop, production, warehouse • Hall crane system ready for immediate reinstallation Fpodjy Eniqepfx Aa Nog _____ 🚚 Logistics • Location: 47665 Sonsbeck • Shipping: possible • Loading: free of charge onto truck provided by buyer

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  Capacity: 12 – 14 cycles/min (tray former) Application: Carton forming and sealing Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing Utilities: Voltage: 3 × 400 V Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) Air pressure: 0.6 – 1.0 MPa Rated current: 2 A (tray former), 3 A (case sealer) Scope of Delivery  Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration Fjdpfx Aoyxxxvea Njpg

Condition: ready for operation (used), DEMAG DH2100 H18 - 40 t Fedpfjy D Iwxex Aa Nopg

Condition: like new (used), DEMAG cover H20 - P1000/1200 Fpedpfxey D Ikre Aa Neg