Used Dittel Bm 2000 Balance - Meßgerät Sn:239-5228 for sale (13,486)

Condition: excellent (used), Welding positioner, 2-ton load capacity with hand and foot remote control Speed and inclination continuously adjustable good condition, machine is robust and durable Height when tilted up to the center: 1.05 meters Height in horizontal position: 1.3 meters Diameter: 1.3 meters Length: 2.2 meters Width: 1.4 meters Ndodpfx Akegytcljmec Speed: from 0.01 revolutions per minute to approximately 1.0 revolution per minute.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 2000 kg load capacity Rotating device, self-supporting, with brake for fixture construction, toolmaking for assembly, welding, painting, etc. with foot-operated remote control switchable left/right Machine is in technically new condition, almost unused Njdpfohwv Rvsx Akmjdc Dimensions: Height to center of axle 850 mm More machines of this design in various sizes are in stock. Load capacity from 500 kg to 5000 kg.

Condition: used, Year of construction: 2001, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 80 kN Ejector retraction force: 35 kN NJECTION UNIT (120) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 22 / 30 kW Total installed power: 30 kW (38 kW with electric screw drive) Dry cycles (EUROMAP 6a): 1830 / 1900 per hour Dry cycles without nozzle retraction: 2200 / 2300 per hour Net weight (without oil): 6200 kg Dimensions (L x W x H): 5.1 x 1.6 x 2.1 m (length without injection unit Nodpjz D Uv Nsfx Akmsdc overhang) Noise level (idle / full load): 66 / 77 dB(A) Demag Ergotech 150-840 NC4 INJECTION UNIT (840) Screw diameter: 60 mm L/D ratio: 20 Injection pressure: 1351 bar Stroke volume: 636 cm³ Shot weight (PS): 570 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 23.1 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 22 / 30 kW Total installed power: 45 kW (53 kW with electric screw drive) Dry cycles (EUROMAP 6a): 1700 / 1870 per hour Dry cycles without nozzle retraction: 2000 / 2200 per hour Net weight (without oil): 7700 kg Dimensions (L x W x H): 5.4 x 1.6 x 2.1 m (length without injection unit overhang) Noise level (idle / full load): 66 / 77 dB(A)

Condition: new, Year of construction: 2024, Axis distance: 920 mm X-axis: 3000 mm Material thickness: Z 12 mm - 30 mm Feed rate: 20 m/min. A-axis: 360 degrees Minimum dimensions: Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade moves in the X-direction. Max. cutting depth with saw blade: 10 mm Motor: 0.75 HP, 400 volts Required extraction capacity: 2300 m3/h Location: In stock, 54634 Bitburg Njdpfxscnz H Hs Akmsdc - immediately available -

Condition: new, Siemens 1FT6084-1AF71-1EH1 synchronous servo motor, serial number: YFCO37401703001, unused, in original packaging, 100% functional, scope of delivery as shown in the photos. Ndodpoz H Hgrefx Akmsc

Condition: new, Siemens 1FT6084-1AF71-1EH1 synchronous servo motor, serial number: YFCO37401703002, unused, in original packaging, 100% functional. Scope of delivery as shown in the photos. Ndjdoz H Hgxspfx Akmoc

Condition: new, Heidenhain LC 183 1340 5.0 EnDat02 10 D I 0MS14 ~ 1Vss 7C 01 32 linear measuring system, ID: 557679-13, serial number: 4017122U, unused, in original packaging, 100% functional, scope of delivery as shown in the photos. Nsdpfx Akjz H Hh Ajmjdc

Condition: new, Heidenhain RCN 2310 16384 7KS12 EK T 23C 53A 64 01, rotary encoder, ID 667787-01, serial number 40184366A, unused, in sealed original packaging, 100% functional, scope of delivery as shown in the photos. Nodsz H Hi Hopfx Akmodc

Condition: new, Siemens 6SN1123-1AB00-0CA3 LT module, serial number T-CO01120114, unused, in sealed original packaging, 100% functional, scope of delivery as shown in the photos. Ndedpjz H Hlbsfx Akmec

Condition: ready for operation (used), Heidenhain UV 105 ID: 344 980-02 SN: 11803610A – complete overhaul and testing performed professionally, including test report, with a 3-month warranty. 100% functional. Scope of delivery as shown in the photos. Ndsdpfx Akjz R Ii Domsc

Condition: excellent (used), Year of construction: 2010, 1,0 ST. gebr. Spritzgiessmaschine Nedpfx Aez Iy N Ajkmjdc Hersteller: NETSTAL Typ: EVOS3500-2000 Baujahr: 2010 Schließkraft: 350 Tonnen Holmabstand: 730 x 730 mm Schneckendurchmesser: 70 mm Spritzteilgewicht: 916 g/PS Ausstattung: Kernzüge 3 x DS / 2 x AS Schnittstelle Roboter

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 030536, turning length: 2,000 mm, center width: 2,000 mm, center height: 330 mm, spindle speed (max.): 2,500 rpm, spindle motor power: 18,500 W, The Saeilo Contur Dialog H 66/2000 is a used cycle lathe, manufactured in 2004 (first commissioning 02/2004), equipped with a Siemens Sinumerik 810D control system. With a center height of 330 mm and a center distance of 2,000 mm, it is designed for longer shafts that are machined individually or in small batches. It can be operated manually or programmed for cycle operation. The machine is located in the Düsseldorf area. Nsdpjz H Ugajfx Akmodc TECHNICAL DATA - Year of manufacture: 2004 - Control system: Siemens Sinumerik 810D - Center height: 330 mm - Center distance / turning length: 2,000 mm - Swing diameter over slide: 400 mm - Spindle speed max.: 2,500 rpm - Spindle drive: 18.5 kW EQUIPMENT AND ACCESSORIES - Chip conveyor Saeilo TTM-325 (hinged belt) - Turning chuck - Turning and clamping tools - Setup tools - Operating manual Contur Dialog H 56/66/66G CONDITION During our inspection on 01.10.2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION Suitable for shafts, spindles, and tube parts up to 2 m in length in the tool and maintenance sector, where many individual parts are required. LOCATION AND HANDLING The machine is located in the Düsseldorf area. Inspection by appointment. Dismantling, loading, and transport are organized by the buyer; upon request, we can provide contact details for freight forwarders in the region. Price on request. Please contact us via the contact form.

Condition: used, Year of construction: 2003, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Ndodpoz D U D Tofx Akmoc Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg INJECTION UNIT (120) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l INJECTION UNIT (840) Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1946 bar Stroke volume: 442 cm³ Shot weight (PS): 400 g Max. dosing stroke: 225 mm Barrel heating power: 14.8 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l

Condition: ready for operation (used), Heidenhain. 293 890-04 A2 communication board, 293881 03, serial number 10193264, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nsdpfxjz Syy Ro Akmsdc

Condition: ready for operation (used), Heidenhain UVR 120D ID 390 188-01 SN: 14057083B - including test report, professionally and completely overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Nsdpjz Syzzjfx Akmodc Note: In the exchange process, your defective exchange part must not have any mechanical damage, such as fractures, as these are no longer repairable. In this case, an additional charge of €1,000 including VAT will be applied. Attention: You are bidding on a Heidenhain UVR 120D inverter, ID 390 188-01, SN: 14057083B, offered as an exchange service. It has been professionally and completely overhauled and tested, and comes with a 3-month warranty. The scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €1,000 including VAT will be issued.

Condition: ready for operation (used), Heidenhain .344 712-01 A5 card, 323257-06, serial number 10454064A. Circuit board, used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Nedpfjz Tbfkex Akmjdc

Condition: good (used), Gearbox, spur gear, angle gear, worm gear -Manufacturer: Ruhrgetriebe, gearbox type SN 3 B -Translation: i= 12 : 1 Ndjdpfx Akjxaziqjmoc -max. torque: 13.5 Nm -Shafts: Ø 12 x 30 mm -Number: 2x gearbox available -Price: per piece -Dimensions: 130/114/H75 mm -Weight: 0.9 kg

Year of construction: 2023, condition: new, PLASMA CUTTER MODEL MTX 2040 - VENTILATED Construction: Steel + Aluminum Working area: 4000/2000/200 XY axis drive: Double-sided gantry drive: 4Nm stepper motors with gearboxes, toothed racks Z axis drive: Stepper motor, ball screw Travel speed: Up to 25 m/min Z axis control system: THC My plasm system Linear guides: TBI IGUS guide Automatic material detection system Power supply: 240V Permissible load: 2000 kg Total weight: 800 kg net USB port for opening projects and transferring files using external pen drives Sheet metal detection system THC cutting height control system TBI linear guides Double-sided gantry drive: X axis: Stepper motor and toothed racks Y axis: Stepper motor and toothed racks Z axis: Stepper motor and ball screw Drives implemented using TBI HGR 20 rails Ventilated table adapted for fume extraction INCLUDED: - Ventilated table - Control software in Polish - CE declaration of conformity - Technical documentation - Warranty - Commissioning and training included The latest control system available in our cutters: Nedpfsiphu Isx Akmjdc Integrated THC height regulator Anti-torch plunge function Supported file types: DXF, PLT (hpgl), G-codes (.tap) Integrated CAM module: MyMini CAM Automatic recognition of external objects Path analysis in advance Database of cutting parameters Project angle correction for the material Possibility of cutting from any location Possibility of cutting from the end Import DXF, PLT or G-CODES Automatic generation of paths with offset, entry and exit points The program can be used with external CAM software Separate speed for holes Parameter database Project correction to the material layout angle Software and hardware limits Anti-plunge THC functions Game Pad control possible Material detection via touch system, floating torch head WHY IS IT WORTH IT? WE ARE A POLISH MANUFACTURER OF PLASMA CUTTERS CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER) HIGH-QUALITY GUIDES FROM THE RENOWNED HIWIN COMPANY, CHARACTERIZED BY VERY LONG LIFE AND HIGH CUTTING QUALITY, WHICH DOES NOT REQUIRE FURTHER PROCESSING COMPONENTS SUCH AS GEARBOXES, MOUNTINGS, HOLDERS, ETC. ARE MANUFACTURED BY US USING CNC TECHNOLOGY, WHICH GUARANTEES HIGH QUALITY AND REPEATABILITY OUR STRENGTHS: HIGH-CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT AFFECTED BY DUST OR JAMMING ADVANCED THC MY PLASM, SMOOTH TORCH OPERATION CPC INTERFACE (VOLTAGE DIVIDER) MOUNTED IN THE CUTTERS WE MOUNT CUTTERS SUPPLIED BY THE CUSTOMER OR PURCHASE CUTTERS THAT MEET THE CUSTOMER'S REQUIREMENTS WE HELP WITH ARRANGING LEASING Possibility of selecting the appropriate cutter to meet the individual needs of the company. We offer other table dimensions.

Condition: used, Measuring and marking plate, steel cast gray cast iron, heavily ribbed, STIEFELMAYER originates from a measuring machine with a hand-guided measuring arm high-precision measuring plate with a good surface finish Machine no. 8530979, year of manufacture approx. 1989 Length 5000 mm Width 2000 mm Thickness 350 mm Working height 690 mm Plate thickness 40 mm, continuous - 15 adjustable feet Ndedpeftpl Defx Akmec - very precise and stable longitudinal guides, screwed to the side of the plate Space requirement L x W x H 5000 x 2120 x 400 mm Weight approx. 7500 kg good surface finish

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: RERS 0193, workpiece weight (max.): 16 kg, total width: 820 mm, total length: 1,940 mm, total height: 1,660 mm, input current: 6 A, input voltage: 230 V, Schenck TB Sonio high-speed balancing machine for turbocharger rotors. The machine is in full working order and is currently in use (operation is performed using a computer mouse; the touchscreen function does not work – this is a factory defect of these monitors). Ndjdpfx Aksz R Nq Rjmjc The balancing machine is sold with 83 adapters for balancing turbines.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 2,230 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 850 mm, table length: 2,000 mm, table width: 1,650 mm, spindle speed (max.): 5,000 rpm, table load: 6,000 kg, overall weight: 19,500 kg, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, number of axes: 3, This 3-axis KAOMING KMC-2000 SV gantry milling machine was manufactured in 2008. It features a generous X-axis travel of 2,230 mm, Y-axis travel of 1,700 mm, and Z-axis travel of 850 mm. The machine includes a substantial table size of 2,000 x 1,650 mm and a maximum table load of 6,000 kg. If you are looking to get high-quality milling capabilities, consider the KAOMING KMC-2000 SV machine we have for sale. Contact us for further details. Njdez Sp I Dopfx Akmsdc - Tool Taper: SK50 - Tool Changer Positions: 30 slots - Control On Hours: 30,233 h (as of end of 2025) - Program Run Hours: 17,814 h (as of end of 2025) - Optional Equipment: Integrated magnetic/clamping plates on table, chip conveyor, internal/external coolant nozzles, remote handwheel control unit, electrical cabinet with cooling/air conditioning unit.

Condition: used, Year of construction: 2006, operating hours: 9,800 h, We offer this used Bonfiglioli Drake 2000 hammermill shredder, manufactured in 2006. Maximum power of the main motor: 400 kW Rated voltage: 400/690 V Frequency: 50 Hz Includes: Hammermill, double magnetic separation system for ferrous metals, Gauss separator for non-ferrous metals, aspiration system, conveyors, and electrical cabinet. Nedpfxszc I S Ee Akmodc If you have any further questions or require additional information, please send us a message or call.

Condition: excellent (used), functionality: fully functional, total length: 2,000 mm, total width: 350 mm, total height: 900 mm, table height: 900 mm, Roller track, Graule, 2m. Ndedpfx Akoz Suc Tomsc

Condition: excellent (used), functionality: fully functional, Control panel taken from a working Arburg 420C 1000-350 machine. Ndodst Dyl Sjpfx Akmoc +F00 SN 158.719A

Condition: good (used), Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table -Scissor lift table: Flat form lift table type SHT20-E -Load capacity: 2000 kg -Platform: 1250 x 1000 mm -Dimension when retracted: Height 300 mm -Extended dimension: Height 975 mm Ndsdpfx Aoz Sz Agjkmjc -Transport dimensions: 1250/1000/H300 mm -Weight: 245 kg