Used Dofra Foodtech Potato Segmenter for sale (1,042)

Condition: new, Year of construction: 2026, Rojek sliding table saw swiveling The machine design has many technical innovations that increase useful utility properties of this machine. The high quality workmanship makes this sliding table saw the best in its class. The machine is standard equipped with aluminum sliding table CV 360T with very precise and fixed mounting on hardened bars. The precision and reliability are guaranteed by massive swivel segment guide of the saw mechanism in the robust cast iron body and scoring unit with separate motor. Engine power 5,3 kW Motor power of separate scoring unit 0,75 (1)* kW Speed of the saw blade spindle 4400 rpm Ledpfx Aben D Arajysrn Max. Cutting height of saw blade 315 (350/ 400) 90°: 102 (120/138) mm 45°: 71 (83/86) mm Max. Saw blade diameter with scoring 315 (350/400) mm Spindle diameter of the saw blade 30 mm saw blade tilting 90° - 45°. Diameter of scoring saw blade 120 mm diameter of scoring saw blade spindle 20 mm scoring spindle speed 8530 rpm (50 Hz) table size 400 x 955 mm cutting width 800 (500;1050; 1300; 1500) mm Suction pipe diameter P 100 + 40 (80) mm Noise level with technology LpAeq 92,9 dB Net weight approx. 500 kg Sliding table CV360 size of aluminum sliding table 2500 x 360 mm Cutting length 2500 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, HSBM 2020-20 SB – Manual Swivel Bending Machine HSBM SB – Manual swivel bending machine in a heavy-duty design with segmented upper tools Easy to operate Segmented upper tools Swivel bending function with secure clamping of the workpiece through pre-tensioning of the upper die Heavy, compact welded construction For simple bending with precise adjustment of the bending angle using a stop with a scale Particularly low maintenance Segment division 25-30-35-40-45-75-100-150-200-200-270-400-400 Note regarding technical data: Sheet thickness max.: Performance data refer to material with a tensile strength of 400N/mm²; Bending capacity stainless steel: Factor 0.75; Bending capacity aluminum: Factor 1.2; Hardened upper tools are required for bending stainless steel. Model: HSBM 2020-20 SB Article no.: 3772920 Technical data Working width max.: 2,020 mm Bending capacity max. steel 400 N/qmm: 2 mm Bending capacity max. steel 400 N/qmm without die extension: Bending capacity max. steel 400 N/qmm with die extension: Bending capacity max. stainless steel: 1.5 mm Bending capacity max. aluminum: 2.4 mm Bending angle max.: 135° Segment division Clearance between upper and lower die max.: 120 mm Length: 2500 mm Width: 710 mm Height: 1500 mm Weight: 1,020 kg Lrjdpfx Abjcnxc Neysn Location: Ex works - free loading -

Condition: new, Year of construction: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to precision drive unit and heavy cast iron construction Front steel infeed roller with helical teeth for optimal feed rate Satin-finished steel outfeed roller, optionally with rubber roller on the outfeed side The worktable is mounted on four large columns, ensuring maximum stability under all operating conditions. Thickness table adjustment is carried out via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Standard equipment includes two feed speeds, conveniently selectable from the operator's front Powerful industrial motor Stable steel/cast iron construction Equipment details: Worktable Mounted on four large spindles, ensuring maximum stability under all operating conditions A special lifting device ensures that the table position is maintained perfectly, even without locking Lroded Hx Hpopfx Abysn TERSA planing cutterhead No more adjustment and screwing required Planer knife changes in seconds Self-locking Motorized thickness table height adjustment in S 52 elite s Motorized height adjustment of the thickness table with electronic decimal display For greater precision and user-friendliness Dimensions and weights Length approx. 1080 mm Width/Depth approx. 1440 mm Weight approx. 455 kg Dust extraction connection Dust extraction nozzle diameter (thicknessing) 120 mm Drive power Main motor 7 kW Installation information Space required (length) 1440 mm Space required (width/depth) 1071 mm Space required (height) 1088 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1030 mm Machine body width/depth 998 mm Length 1000 mm Width 1800 mm Explanation of work area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Thicknessing Thickness table length 520 mm Thickness table width 850 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Lrsdpfxoxw N Sbj Abyon Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: new, functionality: fully functional, Year of construction: 2026, Sheet metal folding machine MB-2150 is used to bend metal sheets up to 2150 mm length and 1mm maximum thickness. You can make roofing, ventilation, drainage system elements, windows parts etc. with our sheet metal folding machines. The main difference of our sheet metal folding machine from other brand’s machines is replaceable upper bending bar, so you can change one with standard shape to another one segmented and to use folding machine as segmented bending machine. Or using corrugated shape bar to make corrugated sheet walls and roofing panels. So it allows to wide machine functionality, help to save you money from buying another machines and save your working places. “Standard +” set includes as in standard set sheet metal folding machine, cross cutting knife, alidade, angle limiter and also front cutting limiters, back table, handles, wheels and hand bending tool or shock absorber as an option. front cutting limiters back table handles wheels hand bending tool shock absorber As additional accessories you can also get: 1. Pedals, so it lets to press metal sheet without using sides handles and to make work of one person easier with the machine; pedal mechanism 2. Segmented upper bar, so it allows to bend metal sheets from all four sides and to produce boxes, etc.; segmented upper bar 3. Segmented bending bar, so it allows to bend façade cassettes with the machine; segmented bending bar 4. Corrugated sheets producing tool, so it lets to make corrugated sheets panels for walls and roofing; corrugated sheet tool corrugated panel We produce four models of sheet metal folding machines MB: 1. Sheet metal folding machine MB 1400x1.2mm 2. Sheet metal folding machine MB 2150x1mm 3. Sheet metal folding machine MB 2650x0.8mm 4. Sheet metal folding machine MB3150x0.7mm Lrsdpfx Asy Sgy Ijbyon Weight: 200 kg Dimensions (LxWxH): 260 cm x 70 cm x 110 cm

Condition: new, Year of construction: 2026, The segment folding machine SM 2020x1.2mm is a machine for bending different elements from the metal sheets with maximum length 2020 mm and maximum thickness 1.2 mm. Can be equipped with third bar segmented. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But segment folding machine SM thanks to special segmented bars gives the opportunity to bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisting of parts with different lengths. So you can adjust it to the length you want and bend boxes around this segmented part. We produce three models of segment folding machine SM: Segment folding machine SM-1270 x 2mm Segment folding machine SM-1550 x 1.8mm Segment folding machine SM -2020 x 1.2mm Those segment machines have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle 135 degrees Ljdpfev Tyr Ijx Abyorn The standard set of segment folding machine SM includes: The folding machine SM, tempered segments, angle measuring device, the four position angle limiter, two segments with side cuts, multifunctional acceptance table. As an additional option you can get cross cutting knife for the segment sheet metal bending machine. The maximum thickness of metal the knife can cut is 0.8mm steel. The segments of the folding machine are tempered and the rigidity of them is about 30 HRC. So it lets the opportunity to bend thick metal in any part of bending machine without any damage. We have started producing of segment folding machine SM since 2003 y. So we have a great experience in segment machines producing and can propose you a perfect solution for you business. Specifications Material Material width (mm) 2020 The material thickness (mm) 1.2

Condition: new, Year of construction: 2025, Manual bending machine MB-3150 The principal difference that makes our manual bending machine much more functional than other company’s bending machines it’s the removable upper bar. So it lets you the opportunity to replace the slim upper bar to a bar with another configuration (segmented bar or bar for producing of the corrugated sheets). It’s help you to save money for buying additional machines and save the working place. Our manual bending machine has strong rigid construction so it lets you to bend metal sheets without any unwanted deformations. You can purchase manual bending machine MB-3150 mm in a standard set (manual bending machine, roller shear, back table, alidade, angle limiter, side handles). Or you can get additional equipment for the manual bending machine MB-3150 mm: pedals, segmented bar, bar for producing of the corrugated board, absorber, front limiters) There are fourth types of the manual bending machines MB we make: Manual bending machine 1400x1.2mm Manual bending machine 2150x1mm Manual bending machine 2650x0.8mm Manual bending machine 3150x0.7mm Ljdpfjv T Uvzox Abysrn This manual bending machine bends metal sheets with maximum thickness 0.7mm Our enterprise has started to produce this kind of the manual bending machines since 2003 so we have great experience in doing our job and can propose the great solution to your business. To get information about the price of this bending machine and the way it could be delivered to your location just contact us. We will give you all the information you need. Specifications Maximum material width (mm) 3150 Maximum material thickness (mm) 0.7

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. There are models of manual pan & box brakes we produce: Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: Ledjf Eywwjpfx Abyorn - Manual box & pan folder - Angle measuring device - Four position angle limiter - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: used, Newtec 2013M Nice condition weigher with double PCS (Portion collection system) This machine was used for 1kg. portions potatoes at a speed of around 30 portions per minute. The PCS system can discharge both left and right. *STC just acquired this equipment. While we currently received a lot of new stock we didn't find the time yet to do any work to it. Of-course if you are interested we can prioritize to test and inspect, to ensure you will get a 100% working condition machine. Lredpfjwa Dbljx Abyen If you are interested obviously feel free to contact us so we can gather more information for you.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2021, next inspection (TÜV): 08/2023, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,740 mm, loading space volume: 90 m³, Year of construction: 2021, Equipment: ABS, ecoSTAR 90 cbm graphite black ECOSTAR FE CHASSIS - V13500 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal length of the body: 13500 MM Internal width of the body: 2475 MM Internal height of the body: 2650/2740 MM Volume of the body: 90 cbm Saddle height: 1150-1180 MM TECHNICAL DESCRIPTION 1. FRAME SUBFRAME High-quality steel S355JR (= ST52.3) construction. Chassis not painted but galvanized (EN ISO 1461), hot-dip galvanizing. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 tons Suspension: Original SAF air suspension Brakes: large disc - INTEGRAL Offset: ET 120 BVA: with Lodpozfdgijfx Abyern BRAKE WEAR INDICATOR LIFT AXLE FUNCTION The third axle is a trailing steering axle (internal height front/rear 2650/2740 mm) + First axle is a lift axle STARTING ASSISTANCE is activated when a button in the truck is pressed (truck equipment not included). AIR SUSPENSION Lifting and lowering device. Aluminum air tank. TIRES 6 x 385/65 R 22.5 on steel rims. ET 120. SADDLE BRACKETS JOST module with outrigger pads for air-suspended vehicles. Steering with single-hand operation and 2 speed levels. BRAKE SYSTEM - EBS EBS-E system WABCO 2S/2M - PREMIUM MODULATOR 2-line compressed air brake system according to CE guidelines. Spring brake parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System). LIGHTING - ASPÖCK 24 Volt electrical system. 2 x 7-pole + 1 x 15-pole sockets REAR LIGHTING IN THE UNDERBODY PROTECTION. With aluminum lighting protection (foldable). 2 x 1 five-chamber light - EUROPOINT III - LED version. WORK LIGHT ON THE FRAME 2 x LED WORKPOINT work lights in front of the axles and 2 x behind the axles - with switch on the control console. EXTRA WORK LIGHT 1 work light (Workpoint LED) on the front wall (INSIDE - right) - with switch in the front. HYDRAULIC SYSTEM Pressure: ? Female. Return line: 1 Female. HYDRAULIC POSITION Connection on the front wall. With additional connection option below the body in front of the support legs. Aluminum ladder (3.7 m) attached to the side impact protection (right). RETRACTABLE LADDER AT THE REAR integrated into the rear of the vehicle, on the right. PNEUMATIC CENTRAL LOCKING With pneumatic central locking, with a 1-piece cover plate (floor cover not possible). TOOLBOX PVC with key (800 x 460 x 430 mm). Rear LEFT POSITION CONTROL CONSOLE + BOX TEM The control console is mounted on the rear left. The box for operating the floor system is also mounted on the rear left. FENDERS 6 plastic single wheel fenders. 2 Clear Pass spray guards are permanently attached to the plastic fenders. 2. BIN FRONT WALL The front wall consists of 30 mm thick aluminum plank profiles, type 600, with reinforced corner joints. COVERING INSIDE BETWEEN FLOOR-FRONT WALL Solid seal between the floor and the front wall by means of an aluminum profile and PVC sealing. SIDE WALLS Side walls with smooth design inside and outside. Double-walled side wall profiles 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain version). The side wall profiles are continuously welded together on the inside. FLOOR SYSTEM CARGO FLOOR CF 500 SL-C E-operation. 21 floor slat system. Drive segment consisting of 3 hydraulically double-acting cylinders with a working stroke of 200 mm. Rear end plate made of aluminum. OPERATION OF THE FLOOR SYSTEM E-operation - Electrical with remote control (original Cargo Floor + multifunctional).

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, spindle mount: MK 4, overall weight: 2,500 kg, drilling capacity: 40 mm, spindle speed (max.): 1,655 rpm, Radial Drilling Machine OOYA RE 1000 Radial Drilling Machine for Sale in Excellent Condition Manufacturer: OOYA Machinery Works Co. Ltd "JAPAN" Type: RE-1000A Speed ​​range 50% 12 Segments 32-1655 r/min (50 Hz) Projection 1000 mm Spindle holder MK 4 Drilling capacity in steel (diameter): 35 mm Drilling capacity in cast iron (diameter): 40 mm Arm vertical travel distance: 650mm Spindle diameter: 60 mm Column diameter: 320 mm Clamp base plate: 1020x650mm Clamping block: 450 x 650 x 500 mm ca Spindle diameter: 60 mm Column diameter: 320 mm Power: 3 x 200v 50Hz (Japanese voltage standard) Main motor: 2.2 kW Arm lift motor: 1kw Coolant pump motor: 50 watts Weight: 2.5 t Space requirement approx. 2.1 x 1.16 x 3 m Lodpowvufgefx Abyjrn If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, with segmented infeed roller and segmented pressure bar Tables with top accuracy of 0.0 – max. 1/10 mm Bridge-type, single-sided reversible knife system completely adjusted used good condition cleaned functionally tested partially refurbished Manufacturer: Kölle Type: HK63 Machine no.: 1409 Number of knives: 2 Feed rate m/min: 2 speeds Jointing strip Table guide rollers Segmented pressure bar Segmented infeed roller Integrated dust extraction hood Planing width approx. mm: 630 Planing height approx. mm: 220 Table length approx. mm: 2100 Dust extraction connection mm: 160 Space requirement approx. L x W x H mm: 2200 x 1300 x 1400 Weight approx. kg: 1200 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee Lsdpfx Aszd Hc Rsbyern

Condition: used, Year of construction: 2026, color: grey-black, empty load weight: 4 kg, fuel type: gasoline, gearing type: mechanical, TITLE: NEW ROLL-OFF CONTAINER FLATBED WITH TWO SIDE BOARDS PER SIDE IN TR5 AND DOUBLE-ACTION REAR TAILGATE (SWING AND TIP) WITH FLOOR RESTING ON 200 MM BEAMS, 2 FRONT HYDRAULIC LOCKING CYLINDERS PLUS NEW FASSI CRANE REF: 26-N-04 TYPE: Flatbed with TR5 C side boards NEW: Yes LID: No OPENING: Rear and 2+2 side openings DIMENSIONS OVERALL EXTERNAL LENGTH: 6.20 m INTERNAL FLATBED LENGTH: 4.80 m EXTERNAL BODY WIDTH: 2.55 m FRONT BOARD: 1.60 m + 0.10 m extensions REAR BOARD: 0.60 m SIDE BOARD: 0.60 m WEIGHT: 4300 kg FLOOR: 5 mm WALLS: TR5 COLOR: Grey CRANE DATA BRAND: FASSI F185AC.1.25 SERIAL: 1803-0107 YEAR: 2024 MAXIMUM EXTENSION LENGTH: 12.90 m EXTENSIONS: 5 MAXIMUM OUTREACH CAPACITY: 1,050 kg at full extension Ledpfxoyiv Ego Abyern Subject to errors and/or omissions Prices shown do not include VAT. Please contact our sales team for a current price quote and terms. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA ROLL-OFF SPECIALISTS operates in the industrial and commercial vehicle sales and purchase sector, specializing mainly in the waste management segment. Specialists in trucks, trailers, and hook-lift equipment. With a ready-to-deliver fleet of over 50 trucks and more than 150 containers, hook-lift bins with and without cranes. E.&O.E. Given the volume of listings and detailed information provided, Aurora invites you to check the accuracy of the listed data with our sales staff.

Condition: used, Year of construction: 1990, Technical details: Lodpfx Absu Ictbsysrn plate thickness: 8 mm cutting range: 300 x 300 mm table-size: 1100 x 900 mm voltage: 380 V / Hz Weight approx.: 1,7 t dimension machine xH: 1,3 x 1,2 x 1,5 m For notching of 90° sheet metal segments, works hydraulically. On the table are 2x rulers 300mm 90° offset. T-slot according to DIN 680: a=12mm, h=21mm, b=22mm, c=14mm with length = 1x 330mm and 2x 700mm Operation via control panel and foot switch *

Condition: good (used), Technical data for the pallet racking crossbeam: Racking system: Link 51 Type: Boltless XL Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: yellow Box profile: 80|53 x 45|25 mm Crossbeam type: 4 BST Step profile: H 28 mm, W 20 mm Clips: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of crossbeams: 900 kg, with evenly distributed load 02x Securing pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting out Further information on the pallet racking crossbeam: Crossbeam type 4 BST is used to insert chipboard, steel panels, or similar materials, which then end up approximately flush with the top edge of the racking crossbeams. This prevents any height loss; furthermore, the front of the step crossbeam protects the floors or the insertion segments from damage. The crossbeams are not intended for pallet storage, but rather as picking levels; i.e., for storing boxes, small parts, or similar items. Ljdpfxskv Urwj Abyjrn

Condition: good (used), We are offering a used roller conveyor section from the manufacturer Bito for sale. Ledpfx Aog Iimfebysrn The scope of delivery includes: 01x roller conveyor section, used Manufacturer: Bito Frame material color: galvanized Roller material color: similar to cream white Segment length: approx. 1,580 mm Segment width: approx. 38 mm Roller width: approx. 25 mm Pitch: approx. 25 mm Roller diameter: approx. 20 mm Frame height: approx. 25 mm Roller material: plastic Shipping costs upon request.

Condition: good (used), We are offering a used roller conveyor section from the manufacturer Bito for sale. The scope of delivery includes: 1x roller conveyor section, used Manufacturer: Bito Frame material color: galvanized Roller material color: similar to cream white Lodpsg Iim Hefx Abyern Segment length: approx. 2,460 mm Segment width: approx. 38 mm Roller width: approx. 25 mm Pitch: approx. 25 mm Roller diameter: approx. 20 mm Frame height: approx. 25 mm Roller material: plastic Shipping costs upon request.

Condition: good (used), Technical data for the pallet racking beam: Racking system: Link 51 Type: Boltless XL Included in the scope of delivery: 01x Pallet racking beam, used Material color: yellow Box profile: 80|53 x 45|25 mm Beam type: 4 BST Step profile: H 28 mm, W 20 mm Clip: 3 HK (hook) Clear width: 2,700 mm Max. load per beam pair: 900 kg, with evenly distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal beams against unintentional lifting out Lrsdskvnm Aspfx Abyjn Additional information about the pallet racking beam: Beam type 4 BST is used to insert chipboard, steel panels, etc., which then end up approximately flush with the top edge of the racking beams. This avoids any height loss. Furthermore, the front of the step beam protects the floors or the insertion segments from damage. The beams are not intended for pallet storage but serve as picking levels; i.e., for storing cartons, small parts, etc.

Condition: good (used), The scope of delivery includes: 1x used continuous flow shelving frame Material color: white/galvanized Material color (rollers): white For traverse width: approx. 2,800 mm Overall width: approx. 2,780 mm Overall depth: approx. 2,450 mm Overall height: approx. 110 mm Further data for the continuous flow shelving frame: Number of roller strips per segment: 18 pieces Lrodpfx Asi A I Taobyjn Roller strip spacing: approx. 130 mm Shelf width: approx. 440 mm The KDR shelves were installed in the following shelving systems: Manufacturer: Tegometall Type: CI Clear width: 2,800 mm

Condition: good (used), We are offering you a used flow rack for sale from the manufacturer Bito. The scope of delivery includes: 01x Flow rack, used Lrodpfx Aeg Nt Uzebysn Manufacturer: Bito Frame material color: similar to cream white / Sendzimir galvanized Roller material color: anthracite Segment length: approx. 2,700 mm Segment depth: approx. 1,350 mm Track spacing: approx. 175 mm Roller width: approx. 25 mm Pitch: approx. 26 mm Roller diameter: approx. 25 mm Roller material: plastic Number of rails per flow rack: 16 pcs.

Condition: used, Year of construction: 1997, Number of belts: 1 belt, max. clearance height: 150 mm, max. working width: 1100 mm. 1st unit: Combination unit. 1st roller diameter: Steel roller. 1st unit design: Roller/shoe unit. 1st sanding shoe design: Electronic individual links. Segment width: 50 mm. 1st sanding belt length: 1900 mm. 1st sanding belt width: 1120 mm. Motor: 1 kW. Feed speed: 4 and 8 m/min. 2nd unit: Dust brush. Approx. weight: 2000 kg. Dimensions: 1800 x 1450 x 2120 mm. Storage location: Nattheim Lrjdpfxevvkkao Abyon

Condition: excellent (used), Year of construction: 2013, operating hours: 1,395 h, Calibration and finishing machine, wide belt sanding machine Kundig Brilliant with electronic segment sanding shoe, adjustable sanding head and finish sanding. A video of the machine in operation can be sent upon request. Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of coatings. Edge banding machine with combination head and electronic segmented pressure beam. Edge segments can be switched on and off. Segment width of the pressure beam 22mm (ideal for intermediate sanding of coatings). Pneumatically adjustable calibration roller, grooved, rubberized roller with grit compensation. Drive motor 11kW. Infinitely variable belt speed of 3 - 15 m/s via frequency converter. Belt feed speed infinitely adjustable from approx. 3 to 15 m/min. Belt blowing device workpiece-controlled. Constant table height of approx. 950mm by adjusting the upper part of the machine, thus also integrable in sanding lines. Feed belt still has good grip and is in very good condition. Carpet with adjustable vacuum blower, thus even small parts can be securely held. Maximum sanding width approx. 1100mm. Workpiece height approx. 3.5 to 200mm. Sanding belt dimensions 1120 x 2000mm. Infeed roller table and outfeed roller table. Hood locking mechanism. Dust extraction connection 1 x 180mm, 1 x 125mm. Terminal control with 45 programmable sanding programs for automatic machine control. Parameters: belt speed, feed speed, workpiece height, belt blowing nozzle, vacuum blower, adjustment of the calibration roller and the parameters of the segment sanding shoe. Thickness measuring system with adjustable chip removal and Enormatic with automatic thickness adjustment with feed release, thus eliminating the need for constant re-measurement with the calipers. Programs for different sanding tasks can be stored and selected via smartselect. CE marking. Operating manual. 2 sanding inserts available. The four bellows have been renewed. Without the illustrated connection cable. Original paint, only a few spots retouched. Very good condition from a small company. Lrsdpfxeyxg N No Abyon Machine has approx. 1395 operating hours, i.e. approx. 2 hours per week. Dimensions approx. 1900 x 1650 x 2150mm (LxWxH). Weight approx. 2300kg. With a large, mobile storage table at the height of the belt, for storing the sanding belts. Table size approx. 1520 x 1360 x 950mm. Including various sanding belts from K80 to K400. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: good (used), functionality: fully functional, Year of construction: 2000, Motorized Swivel Bending Machine Manufacturer: HERA, Type: SM4 2500x6mm Year of Manufacture: 2000 Technical Data Manufacturer: HERA Type: SM 4 Year of Manufacture: 2000 Capacity: 2520 x 6 mm Upper ram stroke: 450 mm Lower ram adjustment: max. 100 mm Bending ram adjustment: max. 100 mm Connection value: 5.5 kW / 7.5 kW Operating voltage: 400 V / 50 Hz Control voltage: 230 V Dimensions: approx. L 3.95 x W 2.80 x H 1.9 m Lrsdpsy U Ec Hsfx Abyon Weight: 6.7 t Equipment • Sharp die • Bending die • Segmented bottom die set (total length approx. 2000 mm) • Motorized bending ram adjustment • Controlled back gauge 10-1000 mm • Siemens S7/Simatic OP7 control system The machine is in good condition. It comes from the workshop of a correctional facility. All information is provided without warranty. A demonstration under power is possible at any time in our showroom.

Condition: new, Technical data: Working length: 1020 mm Max. sheet thickness: 2.5 mm Max. opening width: 48 mm Bending angle: 0 - 135° Width: 1350 mm Depth: 820 mm Height: 1140 mm Weight approx.: 285 kg Ljdpfect Rzbox Abyorn Features: - Versatile bending machine for sheet metal workshops and repair shops - Robust construction in a modern design - Easy adjustment of the upper die using a foot pedal, leaving hands free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper die for a wide range of bending options - Optimal price-performance ratio - Quick and easy bending process using a handle - Non-slip rubber coating on the foot pedal for safe operation - Easy adjustment of the lower die to the respective sheet thickness - High upper die for producing profiles with high hems

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, working width: 1,300 mm, overall weight: 4,700 kg, height adjustment type: electric, Wide-belt sanding machine Manufacturer: Viet Type: S3 223 TM Year of manufacture: 2006 (CE) Lodpezd Ayljfx Abysrn Well-maintained calibrating and fine-sanding machine from a small carpentry/manufacturing workshop, suitable for sanding solid wood, veneer, and lacquered surfaces. Working width: 1300 mm Constant table height, motorized height adjustment of the machine’s upper part (the machine is also suitable for inline operation). Automatic workpiece detection, thickness measurement, and infeed protection. 1x cross-sanding unit, sanding belt dimensions: 150 x 5520 mm 1x combination unit with calibrating roller and electronic segmented sanding shoe, segment pitch: 25 mm 1x cleaning brush for removing dust from workpieces 1x ionizer to prevent static charging Feed rate infinitely adjustable Vacuum transport for small, short, or slippery workpieces (e.g., lacquered parts) Operating voltage: 400 V, 50 Hz, 3 phases Dimensions: approx. 2500 x 2850 x 2280 mm (L x W x H) Weight: approx. 4700 kg