Used Doosan Develon Mobile Excavator for sale (7,271)

Condition: repair required (used), functionality: fully functional, Year of construction: 2006, load capacity: 3,250 kg, lifting height: 3,290 mm, load center: 500 mm, fuel type: gas, construction height: 2,100 mm, power: 43.4 kW (59.01 HP), fork length: 1,400 mm, overall weight: 5,085 kg, Equipment: pallet forks, sideshift, We offer this used Doosan G33P-3 front loader forklift, year of construction 2006. Manufacturer: Doosan Infracore Co., Ltd. Country of manufacture: Korea Model: G33P-3 Serial number: KK-00234 Machine type: LP forklift Rated capacity: 3250 kg Rated load center distance: 500 mm Rated lifting height: 3290 mm Minimum closed mast height: 2100 mm Drive tire tread: 982 mm Capacity without attachment: 3110 kg Load center distance without attachment: 500 mm Maximum lift height without attachment: 4750 mm Capacity with attachment: 2885 kg Load center distance with attachment: 600 mm Maximum lift height with attachment: 4750 mm Machine weight without attachment: 5085 kg Manufacture year: 2006 Power: 43.4 kW Blsdpfx Aoza Em Ieprjh If you have any questions or need more information, feel free to send us a message or give us a call. The forklift truck is fully working and has side shift, however I believe a mast seal is faulty as the central mast lifts our of sync and this will need repairing.

Condition: used, power: 102 kW (138.68 HP), fuel type: diesel, Year of construction: 2019, operating hours: 3,035 h, Drive: Wheel Empty weight: 15.050 kg Serial number: N016 Rental currency: EUR Please contact KEY-TEC Sales for more information Bjdpfxsxgz Ute Aprelh

Condition: excellent (used), power: 124 kW (168.59 HP), operation weight: 22,100 kg, chain condition: 70 %, Year of construction: 2019, operating hours: 10,131 h, Equipment: air conditioning, cabin, Doosan DX225LC-5 Year: 2019 Operation hours: 10.131 hrs. ROPS Protection Cabine Airco Radio Back drive camera Central lubrication Monoboom Stick: 2,90 m. All hydr. lines (hammer-, gripper-, scissor line) quick coupler OQ70/55 1x bucket – 700mm width u/c: approx. 60-70% good Blsdpfx Aoy T Hy Rsproh trackshoes: 600 mm width engine with 124kW CE Operation weight: 22.1 to

Condition: new, MOBILE CONCRETE BATCHING PLANT M100-TWN GENERAL Plant Type : MOBILE Concrete Plant with TWIN SHAFT MIXER Plant Capacity : 100m³/hour freshly compressed concrete Mixer Capacity : 3000/2000 lt (2m³ Compressed Concrete) Total Motor Power : 143kw Standard Value can be changed depending on Equipment.. Blsdpfxewhybds Aproh Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY TRANSPORTATION * MINUMUM INVESTEMENT FOR FIELD GROUNDWORK * QUICK INSTALLATION DETAILS: Crjbtuhm Njflz Hlo Aeb Compacted concrete capacity: 100 m³/h Air Compressor Capacity : 950 lt/min Aggregate Hopper : 4 Bins : 4×11.25 = 45 m³ Mixer Type : TWIN Shaft (2 m³). 3000/2000 lt capacity Mixer Converyor Band : 1000 mm * 13000 mm Weighbridges: Aggregate/ Cement /Water/ Additives

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface Blsdeyzgp Uspfx Apreh -4th axis preparation -Hiwin RCV 320 rotary table -HIWIN RTS 320 suport -Hidraulic aggregate 200 bar 3 A+B -4th axis fixture support hydraulic (4x oil, 4x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, DNM 6700L from DN Solutions is CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine -12 bar through the spindle cooling -ball screw nut cooling -oil skimmer belt type -ethernet connection -coolant gun -tool breakage detection in magazine -automatic doors Bledpfx Ajyzhbfeprjh -robot interface -air clamp interface on the table -vacuum pump -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor- right side -mist collector interface

Condition: ready for operation (used), Year of construction: 2014, operating hours: 25,000 h, overall weight: 3,900 kg, controller manufacturer: FANUC, controller model: 0i-TD, number of axes: 4, This 4-axis DOOSAN LYNX220LSYA horizontal turning machine was manufactured in 2014. It offers robust performance for precision turning operations. If you are looking to get high quality turning capabilities consider the DOOSAN LYNX220LSYA machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • Internal machining adapter/shell kit • Preciflex active holder additional adapter set • A set of little used tool set is available for an additional price. Technical Machine Benefits • External turning tool holder • Double external turning tool holder (left side) • Double external turning tool holder (left side) • End surface treatment holder • Internal machining holder • Double external turning tool holder (both sides) • Triple internal machining holder • Axial active tool holder (left side) • Axial active tool holder (left side) • Radial active tool holder Blodpfxjx D I T Ro Aproh Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,500 rpm, travel distance X-axis: 245 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 1,270 mm, overall weight: 6,300 kg, controller manufacturer: FANUC, controller model: 18i-TB, This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information. Additional equipment • Documentation/manual Machine Benefits Technical Machine Benefits • Turning length: 1270 mm • Turning diameter over cross slide: 334 mm • Turning diameter: 334 mm • Spindle bore: 86 mm • Tool holder: 55 mm • Speed infinitely adjustable Bljdpsx D H Aqofx Aproh Extra Information Machine still under powerClamping range 30–150 mmMaximum opening 170 mmMeasuring arm for tool measurement

Condition: used, Year of construction: 2013, operating hours: 2,990 h, load capacity: 3,000 kg, lifting height: 4,000 mm, fuel type: gas, construction height: 2,540 mm, gearing type: automatic, Equipment: cabin, head guard, Doosan G30G. Forklift with a load capacity of 3,000 kg and 2 doors. Unladen weight: 4,600 kg. Lifting height: approx. 4 m. Tow hitch, heater, 2 sliding windows, turn signals, work lights, fork length approx. 1 m, windshield wiper, power steering, suspension seat, Blsdpfjy S Ng Dox Aproh reversing alarm, 4-cylinder engine. Daily purchase of commercial vehicles, trade-ins also possible. Price: €6,900.

Condition: excellent (used), FANUC 21-M Control With NC dividing head Working travels 1020 x 510 x 575 mm Bljdpey Hqyhsfx Apreh Table size 1200 x 550 mm Spindle taper SK40 Spindle speeds 60-8'000 rpm Tool changer 24 Pos. Coolant through spindle Misc. accessories MARCELS MASCHINEN CH

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 4,799 h, load capacity: 16,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: duplex, construction height: 4,870 mm, power: 118 kW (160.44 HP), fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift truck - Diesel Load center: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Air Rear tires type: Air Bljdpfjy Scxtsx Aproh Description: Sideshift, tine adjuster, 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab,

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 15 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 762 x 516 x 570 [mm] - Rapid traverses rates (X/Y/Z) : 40 / 40 / 36 [m/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 - Tool exchange time : 1,3 [sec] PALLET CHANGER - Pallet size : 860 x 570 [mm] - Pallets number : 2 - Pallet exchange time : 5 [sec] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 40,25 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3130x3260 [mm] - Machine height : 3130 [mm] - Machine weight : 9200 [kg] EQUIPMENT - CNC : Fanuc 0i-MD Interface : PCMCIA, RS232 / RJ45 - 3 colors status lamp - Coolant tank * with high-pressure pump : 20 [bars] - Coolant through spindle - Spindle cooling unit - Chips conveyor Bsdpey Tzcyofx Aprolh - Electric transformer

Condition: ready for operation (used), Year of construction: 2002, spindle speed (max.): 2,500 rpm, travel distance X-axis: 550 mm, travel distance Z-axis: 1,130 mm, spindle motor power: 22,000 W, controller manufacturer: FANUC, controller model: 21i-T, number of axes: 2, Horizontal turning machine manufactured in 2002. This DOOSAN S 550 L features a maximum workpiece diameter of 550 mm and a spindle power of 22 kW. It includes a programmable tailstock and a 12” 3-jaw chuck, enhancing operational efficiency and precision. If you are looking to get high-quality turning capabilities, consider the DOOSAN S 550 L machine we have for sale. Contact us for further details. • Condition: Fully functional, ready for demonstration; machine still under power; enhanced operational efficiency and precision • Capacities: max workpiece diameter 550 mm; swing over bed 710 mm; distance between centers 1230 mm; spindle center height 1067 mm; bed width across saddle slideway 280 mm • Spindle: nose ASA A2-8; spindle hole taper MT No. 7; spindle bore Ø102 mm; front bearing Ø150 mm; bearings: roller/angular + thrust; speed override 50–150; motor AC 18.5/22 kW (continuous/30 min) • Turret/tooling: V12 turret; standard tool shank 25 mm; max boring bar Ø50 mm • Axes: rapid traverse rate X: 20, Z: 24 (units as provided) • Control/electrics: NC unit F-21iTB; total power consumption 31 kVA • Pumps: hydraulic pump motor AC 1.5 – 4P kW; way lubricating pump motor AC 0.02 – 4P kW; coolant pump motor AC 0.4 – 2P • Other features: steady-rest and tailstock move when hooked to the carriage Additional equipment • Programmable tailstock Bodpfjy Hrgcjx Aprslh • 12" 3-jaw chuck • Self-centring steady rest SLU 3.1 • Automatic tool measuring arm Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), functionality: fully functional, Pin diameters: 8 cm – 9 cm Center distance: 38.5 cm and 40 cm All measurements are shown in the photos Blade length: 145 cm All dimensions can be setted according to your machine by bohrwerk machining Very competitively priced Bjdpjyzabwsfx Aprslh

Condition: used, machine/vehicle number: IC1371, Year of construction: 2018, operating hours: 142 h, load capacity: 2,000 kg, load center: 600 mm, enginetype: Electric, manufacturer: Doosan Bledpfx Apjy I Hqlsroh

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, lifting height: 6,050 mm, free lift: 1,930 mm, fuel type: electric, mast type: triplex, power: 22 kW (29.91 HP), fork length: 1,800 mm, Weights Empty weight: 8.700 kg Functional Lifting capacity: 5.000 kg Maximum passing height: 275 cm Number of valves: 3 Supply voltage: 80 V CE mark: yes Bodpfx Ajy S Uw Ujprolh Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Front tyre size: non-marking Rear tyre size: non-marking Fork carriage: Sideshifter Transport dimensions (LxWxH): 3,09x1,47x2,75 Additional information Please contact Stephan Honinx, Dietmar Pack or Simon Pack for more information = Additional options and accessories = - 3rd valve - 4th valve - Battery charger - Free lift - Super elastic tyres

Condition: excellent (used), Year of construction: 2015, DOOSAN G30 Generator Set – Machine after full service! Technical data: Power: 31 kVA (25 kW); Year of manufacture: 2015; The generator is fully operational, ready for work, with warranty. Net price: PLN 26,500 Gross price: PLN 32,595 Bsdoylifrjpfx Aprelh Below you will find a link to a video showing the machine in operation.

Condition: excellent (used), turning diameter over cross slide: 300 mm, turning length: 510 mm, Model: 2100 LYB Control: Fanuc i Series Year: 2019 Turning Diameter: 300mm Turning Length: 510mm ‘X’ Axis Travel: 205mm ‘Y’ Axis Travel: 105mm ‘Z’ Axis Travel: 560mm Spindle Speed: 4500 RPM Spindle Power: 15KW Blodpjy N Uqisfx Aprjh Spindle Torque: 169N-M Machine With: 200mm Power Chuck Driven Tools (1-AxiaL -1- Radial) Tool Eye Parts Catcher Filtermist Dimensions: 2880 x 1711 x 1921 High Weight: 3900 Kgs

Condition: used, lifting height: 4,650 mm, Year of construction: 2016, operating hours: 8,640 h, Year of manufacture: 2016 Empty weight: 8.500 kg Digging depth: 4.175 m = Additional options and accessories = - Rubber tracks Bledpfjy Nw Abex Aproh

Condition: used, Year of construction: 2023, operating hours: 940 h, Year of manufacture: 2023 Empty weight: 5.000 kg Dimensions (LxBxH): 530 x 196 x 255 cm Blodpfx Aoy Nwz Rspreh = Additional options and accessories = - Rubber tracks

Condition: used, Year of construction: 2017, operating hours: 7,480 h, Equipment: air conditioning, Year of manufacture: 2017 Empty weight: 18.890 kg Dimensions (LxBxH): 810 x 292 x 347 cm Digging depth: 4.4 m = Additional options and accessories = Bedpjy Nwukjfx Aprolh - Central lubrication - Rubber tracks

Condition: used, Year of construction: 2017, operating hours: 6,650 h, Year of manufacture: 2017 Empty weight: 23.500 kg Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Digging depth: 10.795 m = Additional options and accessories = - Central lubrication Bedpfx Asy Nwudoprslh

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders Bljdjy E I Hiepfx Aproh • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) Additional equipment • OPTIONAL: HALTER LoadAssistant Universal Big 70 (robot) • Gripper for Doosan Universal Big 70 • Turning station • Workpiece support • Base plate 23 mm / 175 mm Big 70 • Machine interface box Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,000 W, total height: 1,915 mm, total width: 1,985 mm, overall weight: 6,550 kg, controller manufacturer: SIEMENS, product length (max.): 3,857 mm, number of axes: 6, This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2022. It features a maximum turning diameter of 255 mm and a turning length of 760 mm. The machine is equipped with a 24-station tool turret and driven tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600 SY II horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D Control touchscreen with ShopTurn 15 inch display • 6-axis configuration with driven tools, Y-axis and sub-spindle • Main and sub-spindle as built-in motor spindles • Cylindrical roller bearing, accuracy class P4, lifetime lubrication • Main spindle chuck diameter 255 mm • Sub-spindle chuck diameter 175 mm • Hollow clamping device, hydraulically actuated • Hollow clamping cylinder • 24-station tool turret (BMT65P interface) • Automatic tool measuring arm, electrically swiveling • Dynamic spindle speed control • Counter spindle with tailstock function • Coolant flow max 448 L per minute • Oil flow 336 L per minute • Electronic safety clutch for X and Z axes • Working area swing over bed 780 mm • Swing over cross slide 630 mm • Max turning diameter 255 mm • Max turning length 760 mm • Bar capacity 76 mm • Max workpiece weight including chuck 250 kg • Main spindle bore 91 mm • Max torque approx 706 Nm • Sub-spindle bore 52 mm • Spindle speed up to 6000 rpm • Motor power approx 18.5 kW • Torque approx 118 Nm • C-axis main spindle: 360° resolution 0.001°, speed 200 rpm, torque approx 1508 Nm • C-axis sub-spindle: 360° resolution 0.001°, speed 200 rpm, torque approx 121 Nm • Turret: 12 driven tool stations out of 24 • Max driven tool speed 5000 rpm • Driven tool power approx 7.5 kW • Driven tool torque approx 50 Nm • Rapid traverse X and Z approx 30 m/min; Y approx 10 m/min • Bed angle 30° • Coolant tank capacity approx 220 liters • Coolant pump pressure 7 bar • Hydraulic tank approx 20 liters • Central lubrication automatic system Blodpfjy E Izaex Apreh • Electrical connection AC 380 V, 3-phase, 50/60 Hz • Total power approx 69.27 kVA • Machine was never used (like new) Additional equipment • LNS hinged belt chip conveyor, right side, without filtration • Dormatec AF-30P oil mist extraction system • Boring bar holders, diameter 50 mm to 25 mm • Double boring bar holder, diameter 32 mm • Reducing sleeves set: 40/10, 40/12, 40/16, 40/20, 40/25, 40/32 • U-drill reducing sleeves: 40/20, 40/25, 40/32 • Two Eppinger driven tool holders BMT65P, straight, with external cooling Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: new, functionality: fully functional, Key features of the DOOSAN T4005 Drill Tap Center may include: High Precision: The DOOSAN T4005 Drill Tap Center is engineered for precise drilling and tapping results, delivering consistent quality in manufactured components. High-Speed Spindle: Featuring a powerful, high-speed spindle, the machine efficiently processes various materials—such as metals, plastics, and composites—while maintaining productivity. Blodpfxoy Sv Tqo Aprjh Multi-Axis Capability: Many DOOSAN T4005 models are equipped with multiple axes, enabling complex machining operations and greater flexibility in component production. Automatic Tool Changer: The machine often includes an automatic tool changer, allowing for smooth transitions between different tools and minimizing setup times to enhance efficiency. User-Friendly Interface: The CNC system typically offers an intuitive user interface, simplifying programming, process monitoring, and operation for users at all experience levels. Robust Construction: Designed for industrial use, the machine is built with high-quality materials and components to ensure durability and continuous operation. Customization Options: Depending on the manufacturer, the CNC machine may offer various customization options to adapt to specific machining or production requirements.