Used Dumeta D-D-300 for sale (54,986)

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 8,400 kg, maximum load weight: 15,600 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,900 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-tailored transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Ledji Ri Rvepfx Afusac Further information Chassis Steel welded construction Turntable with robust ball bearing race Foldable rear support 2 wheel chocks + holder Aluminum side impact protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle 1 pair of wheel recesses embedded in the low-bed area in front of the 1st axle, angled for entry, approximately 1600 mm long at the bottom, approximately 400 mm deep. Note: Frame in the main beam area is 400 mm higher than the wheel recess. 2 pairs of wheel recesses embedded in the low-bed area between the axles, angled for entry, approximately 600 mm long at the bottom, approximately 300 mm deep. Note: Frame in the main beam area is 300 mm higher than the wheel recess. Extensible widening to 3,000 mm (not in the rear slope) Wooden planks 70 mm for widening to 3000 mm Tie-down eyes, low-bed trailer 1 pair of tie-down cutouts embedded in the longitudinal beam at the front in front of the 1st axle, each 10 tons. 4 pairs of tie-down holes in the outer frame, each 5 tons. 7 pairs of tie-down eyes embedded on the top and side in the outer frame, each 10 tons. 1 x at the front in front of the 1st axle 6 x in the low-bed First tie-down eye 250 mm from the front and last max. 250 mm from the rear, distance between tie-down eyes not greater than 1100 mm Coupling device, trailer turntable Tow hitch with tested 40 mm tow ball Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing Wheels and tires 235/75R17.5, according to manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking lights (beacon can be removed) 2 pairs of warning signs, double LED-illuminated and extensible to 3,000 mm Floor Front slope with steel/diamond plate covering Storage box embedded in the drive-over slope to the front slope, then with 70 mm soft wood floor, in the wheel arch area steel/diamond plate covering Rear slope with 70 mm soft wood floor Low-bed platform including rear slope 6500 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Covered with wood With spring-assisted support Operating instructions With an axle load of 10,000 kg, an exemption permit is required, only indivisible loads are possible!!! The specified total weight is technically possible, depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) Registration country/Signs Registration country: Germany With DEKRA acceptance and certi

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,150 kg, maximum load weight: 16,850 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, total length: 11,990 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. More information Chassis Steel welded construction Turntable with heavy-duty ball bearing, storage box recessed in the turntable extension Foldable rear support 2 support wedges with holder Aluminum side impact protection Splash guards at the rear over the entire width Lsdoi Riy Eopfx Afujac Extendable widening sections to 3,000 mm (not in the rear slope) Storage compartment for wooden planks in the center of the loading area Wooden planks 70 mm for widening to 3000 mm Tie-down eyes for low-bed trailers 3 pairs of tie-down points, each with 10 tons capacity, integrated in the floor at the front 6 pairs of tie-down recesses on the top and sides of the outer frame, each with 10 tons capacity 1 x near the gooseneck area the rest distributed in between, with a distance of no more than 1200 mm 1 x rear slope 5 pairs of lashing pockets recessed in the outer frame, 70 x 40 mm inside, (convertible to 5-ton ring tie-down eyes, not included in the scope of supply) Coupling device for trailer turntable Drawbar with tested 40 mm drawbar eye Axles + Suspension SAF drum brake axles Axle / chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical Axle load equalization (rocker equalization) Braking system 2-line compressed air braking system Color-coded line routing for easy servicing Spring-loaded parking brake including 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connection cable, Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Wheels and tires 235 / 75 R 17.5 at the manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin fail-safe plugs at the front, with connection cable, 1 LED rotating beacon with holder, switched via parking lights (beacon can be removed) 2 pairs of warning signs, double LED-illuminated and extendable to 3,000 mm Floor Front area with steel floor, then with 70 mm softwood floor, in the wheel arch area steel / tread plate covering Rear slope with 70 mm softwood floor Low-bed platform including rear slope 8,200 mm Ramps Steel ramps 2800 mm long, 750 mm wide, laterally movable covered with wood including with spring-loaded support Operating instructions An exemption permit is required for a 10,000 kg axle load; only indivisible loads are possible!!! The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle / support and saddle loads. Country of registration / signs Country of registration: Germany with Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau 10-year warranty against rust-through Drawbar galvanized or black, at the manufacturer's choice Ramps hot-dip galvanized Note: Archive images! Customized transport solution Configure your Flieg

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,900 kg, maximum load weight: 16,100 kg, overall weight: 24,000 kg, axle configuration: 2 axles, loading space width: 2,520 mm, loading space height: 900 mm, total length: 11,625 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-tailored transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Further information Chassis Steel welded construction Lsdpei Ri Agjfx Afusac Turntable with heavy-duty ball bearing Foldable rear support 2 jacking plates with holder Splash guards at the rear over the entire width Preparation for widening to 3,000 mm (holes in the outer frame and not in the rear slope) Tie-down eyes, low loader 1 pair of tie-down recesses embedded in the front longitudinal member on the extension, 10 tons each 7 pairs of tie-down studs embedded in the top and sides of the outer frame, 10 tons each 1 x at the front on the extension 5 x in the low bed 1 x in the rear slope 12 pairs of tie-down holes in the outer frame, 5 tons each (for securing tie-down straps) 5 x on the extension, 6 x in the low bed and 1 x in the rear slope Coupling device, trailer turntable Tow hitch with tested 40 mm drawbar eye Axles + Suspension Drum brake axles, at the manufacturer's choice Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (lever equalization) Wheels and tires 235 / 75 R 17.5 Fulda Steel rims in twin arrangement, factory silver Braking system 2-circuit compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle Connecting lines extended by approx. 60 cm Without ABS, but with mechanical ALB, then max. 60 km/h approval Electrical system 12 Volt, multi-chamber lights, without yellow LED lighting on the sides, side reflectors 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 7-pin 12 Volt plug at the front, with connecting cable, extended by approx. 60 cm 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of illuminated and extendable warning signs to 3,000 mm Floor Front extension with steel/non-slip sheet covering Storage box embedded in the ramp to the extension Followed by 70 mm soft wood floor, steel/non-slip sheet covering in the wheel arch area Rear slope with 70 mm soft wood floor Low loader bed incl. rear slope 5900 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable Covered with wood With spring-loaded support Operating instructions With 10,000 kg axle load, an exemption permit is required, only indivisible loads are possible!!! The specified total weight is technically possible, depending on the cargo, the total weight may not be achieved while complying with the permissible axle/support and drawbar loads. (Poor driving and handling behavior possible due to incorrect load distribution) Registration country / signs Registration country: Germany With Dekra approval and report, for max. 60 km/h approval, towing vehicle LoF (registration country Switzerland max. 40 km/h possible) Prepared for license plate holder, two lines Without contour marking / reflective strips according to ECE R 048 Painting Frame DB 7350 Novagrau 10 years warranty against rust perforation Tow hitch galvanized or black, at the manufacturer's choice Ramps hot-dip galvanized Note: Archive images!

Condition: used, max. dia. of grinding wheel 300 mm Lsdswva N Repfx Afujac wheel width max 40 mm grinding spindle speed 1500 U/min engine output 1,1 kW Industrial double grinder Very quiet, low-vibration operation With two high-grade corundum discs

Condition: used, mileage: 94,752 km, power: 79 kW (107.41 HP), first registration: 12/2019, fuel type: diesel, overall weight: 3,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total width: 2,032 mm, total height: 1,958 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale reserved! Internal number: 0418. GW22KJ68712 ---- ADDITIONAL EQUIPMENT - 6-speed transmission - Electronic ABS with EBD - Driver's airbag - Electrically adjustable and heated exterior mirrors - On-board computer - Flat roof - Headliner in the driver's cab - Double-wing rear door/180° (without window) - Tachometer - Electronic safety and stability system - Windows, 2nd row: fixed side windows - Electrically operated front windows - Ford Easy Fuel - Generator, 240 A - Cruise control, leather steering wheel - Halogen projector headlights with LED daytime running lights - Grab handle, B-pillar - Glove compartment with lockable lid - Interior lighting with delay - Front air conditioning - Paint: solid color paint - Cargo area lighting - Adjustable steering column - Emergency brake assist incl. emergency brake light - Package: Style Color Package - Electrical - Particulate filter: diesel particulate filter - Radio: Audio system 12 - Wheel covers - Wheels: spare wheel, steel wheel - Wheels: steel 6.5 J x 15 with 215/65R15 - Sliding door entry light, automatic - Sliding door: sliding door, right side with window - Mud flaps, front and rear - Side protection strips - Half-height side wall paneling - Power steering - Seat belts - Seats: 2nd row, 3-seater bench - Seats: Seat Package 13 (Custom DOKA Trend) - Start-Stop system - Socket: 12-volt socket - Front bumper in vehicle color - 4 lashing eyes - Immobilizer - Heat-insulating tinted glass - Central locking with remote control - Auxiliary heater, electric - Second key with remote control ... and more Laodohx Siajpfx Afujc ---- The vehicle has not been prepared! Nationwide delivery possible for an additional charge. Errors and prior sale reserved. We will gladly accept your vehicle as a trade-in. Financing/leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: ready for operation (used), WEG W22 motor with Karl Klein DNG 6-25/TS-300°C fan SN: 1612-302113, used, in good condition, fully functional, scope of delivery as per photos. Laodpfxjx Dwinj Afuec

Condition: ready for operation (used), Indramat KDS 1.1-50-300-W1 AC Servo Controller / Servo Drive SN: 01517D, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. Lasdpfxoy Nrxds Afusc

Condition: ready for operation (used), Indramat TDM 3.2-030-300-W1 controller, serial number: 240061-06062, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Laedsi I I Ayopfx Afuec

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 controller, serial number: 234547768256008, professionally and completely refurbished and tested, with a 12-month warranty. Fully functional. Scope of delivery as shown in the photos. Lajdpei Ebhljfx Afujc

Condition: ready for operation (used), Indramat KDV 2.2-100-220/300-220 power supply, serial number as shown in the photo, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Laedpsi Ebi Uofx Afuoc

Condition: new, Indramat TDM 1.2-050-300-W1-220 controller, serial number (SN), unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Lodpfji Ebnkox Afueac

Condition: ready for operation (used), Indramat KDS 1.3-100-300-W1 controller, serial number: 253759-02030, used, shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Lodpsi Ebifofx Afusac

Condition: ready for operation (used), Indramat TDM 2.1-15-300-W0 AC servo controller, serial number as shown in the photo, used, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Lsdpoi Ebryefx Afuoac

Condition: ready for operation (used), Indramat KDV 2.3-100-220 / 300-000 Power Supply SN:248468-02566, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Laodpfx Afex Etyhsuoc

Condition: ready for operation (used), Indramat KDS 1.3-100-300-W1 controller, serial number: 253759-02033, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Laodpfx Asi Ebiiofujc

Condition: ready for operation (used), Indramat TDM 1.2-050-300-W1-000 controller, serial number: 23450022128, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Lodpfx Afji Ebncjusac

Condition: new, Indramat TDM 1.2-050-300-W1 / S0102 controller, serial number: 232252-768198-003, unused, in opened original packaging, 100% functional. Scope of delivery as shown in the photos. Lajdpfx Afei Ebm Hsuoc

Condition: ready for operation (used), Indramat TDM 1.2-050-300-W1-000 controller, serial number: 23450022133, professionally and completely refurbished and tested, with a 12-month warranty. Fully functional. Scope of delivery as shown in the photos. Lajdpfx Afji Ebngeusc

Condition: new, Rexroth KDS 1.1-100-300-W1-220, part number: R911220055, serial number: KDS111-763942-027, unused, in original packaging, 100% functional. Scope of delivery as shown in the photos. Lodoi Ecznspfx Afusac

Condition: ready for operation (used), Heidenhain LC 481 ML 1140mm length measuring device ID: 327 300-31 SN: 13689665U with AE LC 481 read head ID: 337 452-01 SN: 13689671U, used, good condition, 100% functional, scope of delivery as per photos. Laedpfx Aoy Nqgyofusc

Condition: ready for operation (used), VMI ASSY 10330-0400 REV. D Electronic module, serial number 4631400266, used, normal signs of use, 100% functional, scope of delivery as per photos Laedexaif Hepfx Afusc

Condition: ready for operation (used), Indramat KDA 1.1-100-300-W1-220 AC. Main spindle drive, serial number as shown in the photo, used, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Lasdpfxoi Ebgyj Afujc

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 controller, serial number: 5765, professionally and completely overhauled and tested, with a 12-month warranty. Fully functional. Scope of delivery as shown in the photos. Lajdpsi Ebhpjfx Afuec

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1-220 A.C. servo controller, serial number as shown in the photo, used, professionally refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Lajdpfx Aji Ebhtjfuec

Condition: ready for operation (used), Indramat KDS 1.3-100-300-W1 controller, serial number: 253759-02025, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lsdsi Ebh Tjpfx Afujac