Used Elitron Flatbed Cutter for sale (5,315)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,200 kg, maximum load weight: 28,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,045 mm, tire size: 385/65 r22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Further information Fine-grain steel welded construction, kingpin plate with interchangeable 2-inch kingpin, slightly sloping outer frame, new design with Load-Lock profile for securing lashing straps, 24-ton capacity, two-stage landing gear, single-side operation, with straight lower section, without horizontal load compensation. Note: Free support leg swivel angle or free swivel radius to the rear approx. 1930 mm, extension ladder at the rear, door lock on the side, 2 wheel chocks with holder, Aluminum side impact protection, galvanized steel under-run protection, quarter panel fenders in front of and behind the axle assembly, with anti-splash flaps according to EG standard, rear impact protection. SAF disc brake axles with 430 mm disc diameter, axle/suspension laser-aligned to reduce tire wear and fuel consumption, air suspension. Two-line compressed air brake system, color-coded lines for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, without connecting line, EBS, electronic brake system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve, vehicle – driving stability system. 385/65R22.5, manufacturer's choice, steel rims, factory silver. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 2 x 7-pole tamper-proof sockets at the front, without connecting cable. Floor: Sieve-printed panels approx. 30 mm thick, mounted on longitudinal supports for high point load capacity for forklift axle loads up to a maximum of 7100 kg. Front wall/corner posts at the front: 2580 mm high, corner posts made of steel in a full-volume design, release device for side tarpaulin on the front wall, crash barrier, at the bottom inside at a height of approx. 140 mm with steel impact protection. Side supports: 3 pairs of sliding supports that can be moved along the entire length, with 4-fold insertion pockets and at the bottom with a long pocket, 3 pairs of support positions. Insertion slats: 5 rows of wooden insertion slats. Rear wall/corner posts at the rear: Corner posts made of steel at the rear up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal swivel latch locks each. Tarpaulin: Tarpaulin with welded horizontal and vertical straps, tensioning closures made of stainless steel. Roof: Sliding roof, rear lift that can be folded up, with the roof that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams, approx. 2490 mm, tarpaulin color: white, 400 Roof non-elastic, minimal deflection of the roof beam during loading and unloading, optimal rain strip at the rear, at the top of the rear crossbar, above the doors. Germany, test approval according to EG 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for structural integrity according to EN 12642 XL, prepared for single-row license plate holder, warning sign according to ECE - 70, reflective strips: white, continuously on the side tarpaulin at the bottom and at the top in the co Nedpfei Riy Tex Alhowh

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 6 kg, maximum load weight: 28 kg, overall weight: 35 kg, axle configuration: 3 axles, loading space length: 15,030 mm, loading space width: 2,480 mm, loading space height: 4,060 mm, total length: 15,150 mm, total width: 2,550 mm, total height: 4,060 mm, suspension: air, tire size: 435/50R19,5, tire condition: 100 %, Additional information Chassis, semi-trailer, transport company Fine-grained steel welded construction, with preload for slight tension in the neck area, kingpin plate with interchangeable 2 kingpins X-tra Long, with an internal length of 15030 mm Outer frame slightly angled, new design with Load-Lock profile for attaching lashing straps 24-ton, 2-speed landing gear, single-side operation, with straight lower part, without thrust compensation Note: Free support foot angle or free swivel radius to the rear approx. 1930 mm Retractable ladder at the rear Door lock on the side 2 chocks with holder Aluminum side impact protection Galvanized steel under-ride protection Partial wheel arches in front of the 1st axle and behind each axle Rear impact protection Axles + Suspension SAF disc brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Caution: The semi-trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! Nwjdpfji Riwujx Alhsh with lifting and lowering valve Vehicle driving stability system AAC Basic, automatic lift axle acting on the last axle, as an aid for maneuvering, up to 20 km/h, can be manually switched off Axle load detection via EBS-Canbus signal, for display on the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels & Tires 435/50R19.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side coupled with the turn signal, flashing Side marker lights 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Floor Sieved plywood, approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg Front wall / Corner posts at the front 2580 mm high, corner posts steel in full volume design, release mechanism for side tarpaulin on the front wall, crash blocker, at the bottom inside at approx. 140 mm height with steel impact protection Center posts 3 pairs of sliding posts that can be moved along the entire length, with 4-fold insert pockets & at the bottom with a long pocket. 3 pairs of post positions Insert slats 5 rows of wooden slats Rear wall / Corner posts at the rear Corner posts at the rear steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-wing with 2 internal swivel latch locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Tensioning closures made of stainless steel Roof Sliding roof, rear end lift that can be folded up, with roof that can be slid from back to front, L-roof beam for the automotive industry, interior width between the roof beams approx. 2490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof beam during loading and unloading EcoLift - liftable roof by approx. 380 mm, on both sides, with gas spring support, 3 driving positions at the front: Interior height at the front set to approx. 3000 mm Optimal rain gutter at the rear, at the top of the end ra

Condition: used, mileage: 2,88,000 km, power: 360 kW (489.46 HP), first registration: 10/2017, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, loading space length: 5,800 mm, loading space width: 2,490 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, crane, parking heater, tail-lift, Scania R 490, flatbed truck, Effer crane, remote control, steering axle, lift axle, full air suspension, sideboards, Euro 6 For inquiries: 02626550 * Condition: very good * Power: 360 kW / 490 hp * Displacement: 12,742 cm3 * Euro standard: Euro 6 * Retarder * ABS * EBS * Differential lock, rear axle * Auxiliary drive * Hydraulics * AdBlue, right side * Storage compartment above driver / center / passenger * Electric windows, driver / passenger * Electrically heated and adjustable mirrors * Radio * Suspension: air / air (full air suspension) * Electric sunroof * Multifunction steering wheel * Radio / CD / AUX / USB / Bluetooth * Air-suspended comfort driver's seat, driver / passenger * Seat heating, driver * 2x bunk * Refrigerator compartment under bunk * Automatic climate control * Auxiliary heater * Fog lights * Steering axle * Lift axle * Duomatik * Rotating beacon on roof Superstructure: Flatbed * Sideboards, aluminum Loading area dimensions: * Loading area length: 5,800 mm * Loading area width: 2,490 mm * Loading area height: 800 mm Crane: Effer 685/6S + JIB 6S h.d, Year: 2017 * Remote control Tires: 1st axle: 385 / 55 R 22.5, 35%, air-suspended 2nd axle: 385 / 55 R 22.5, 35%, air-suspended 3rd axle: 315 / 70 R 22.5, 70%, air-suspended 4th axle: 385 / 55 R 22.5, 35%, lift axle, steering axle Nwedpfxszhc T He Alheh ----Price: ,- Euro + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, and...? Typographical errors, errors and prior sale are subject to change.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 100597, pressing force: 1,000 t, overall weight: 33,000 kg, TECHNICAL DETAILS Punching force: 10,000 kN Table area (W x D): 1,100 x 800 mm Stroke: 15 - 55 mm Clearance at max. stroke: 28 - 98 mm Die thickness: up to 3 mm Sheet size (width): max. 1,100 mm Punching speeds Upward: 47.8 mm/s Downward: 93.7 mm/s Punching: 0.28 mm/s Hydraulic unit Type: 250 Nodpfxjzfy Ams Alhewh Dimensions (L x W): 1,310 x 910 mm Oil capacity: 670 l Unit weight: 1,000 kg Oil weight: approx. 550 kg Weight with oil: approx. 1,550 kg Automatic punching table Type: 355 Table plate size (W x D x H): 1,000 x 700 x 10 mm Hardness: 62 HRC Grinding pattern: 7 MACHINE DETAILS Electrical system Operating voltage: 400 V Frequency: 50 Hz Rated machine current: 50 A Supply line fuse: 63 A Control voltage: 230/24 V Rated power: approx. 30 kW Protection class: IP 54 Power consumption: approx. 8 kW Pneumatics Operating pressure: 6 bar Dimensions & Weight Dimensions of the puzzle separator (L x W x H): 3,150 x 1,620 x 2,900 mm Working height: approx. 1,700 mm Total weight: 33,000 kg Weight of the puzzle separator: approx. 1.8 t Noise level: < 70 dB(A)

Condition: used, Year of construction: 2005, Working area 4000 × 2000 mm Vertical movement 250 mm Max. Thickness 80 mm Control: Osai 10/510 ANL Nodezgaq Tjpfx Alhowh Pump: Streamline SL- V 50

Condition: used, mileage: 3,89,189 km, power: 315 kW (428.28 HP), first registration: 03/2014, fuel type: diesel, empty load weight: 15,815 kg, maximum load weight: 10,185 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 5,600 mm, fuel: diesel, color: orange, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, number of beds: 1, Equipment: ABS, air conditioning, crane, differential lock, traction control, trailer coupling, * Rear-mounted crane Hiab 166D-4 HIDUO with remote control * Outreach 12.3 m / 1060 kg Nwedozg Ixrspfx Alhoh * Clamshell grapple * Flatbed platform L = 7.14 m / W = 2.40 m * Wheelbase = 5.60 m * 10 pairs of stakes * 2 seats * 1 bunk * Differential lock, rear axle * Lift axle Tandem trailer: Müller-Mitteltal trailer Platform L = 6.71 m / W = 2.39 m 8 pairs of stakes First registration: 24.03.2014 Total weight 14,400 kg Valid vehicle inspection until 6/2027 ... Roof type: skylight, Roof design: electric, Radio, Anti-lock braking system (ABS), Anti-slip control (ASR), Locking differential, Suspension: Air - Lift, Long-distance transport, Driver's seat with air suspension, Sleeping bunk, Air conditioning, Electric windows, Heated mirrors, Electrically adjustable mirrors, Trailer coupling, Multifunction steering wheel, Crane, 1st owner, Automatic transmission, Used vehicle, Diesel, VAT included, Sleeping berths: 1

Condition: refurbished (used), Trenching machine The machine was completely overhauled approximately 1000 meters ago! Nwodezcnxlopfx Alhsh I have videos that I could send to a phone number via WhatsApp!

Condition: used, functionality: fully functional, Various used rack milling cutters / rack group milling cutters from different manufacturers. Our asking prices are net, ex works, plus packaging costs, starting from €170. Individual prices as follows: Manufacturer: Arnold Dold GmbH & Co.KG Module 0.5 - Group milling cutter - Asking price €370 Module 0.7 - Group milling cutter - Asking price €380 Module 0.9 - TIN coating - Asking price €530 Module 1 - 2 units available - Group milling cutter - Asking price €390 Module 1.25 - Group milling cutter - Asking price €410 Module 1.5 - TIN coating - Asking price €750 Module 1.75 - Group milling cutter - Asking price €730 Module 2 - 4 flutes - one defect - 1.89 kg - Asking price €210 Module 2 - TIN coating - Asking price €770 Module 2.5 - 8 flutes - one defect - 13.52 kg - Asking price €470 Module 3 - one defect - 13.29 - Asking price €230 Module 3 - 7 flutes - Reground - 13.77 kg - Asking price €200 Module 3 - 3 flutes - Asking price €290 Module 3 - TIN coating - Asking price €520 Module 5 - 4 flutes - Reground - 12.15 kg - Asking price €170 Module 5 - 4 flutes TIN coating - Asking price €750 Module 6 - 3 flutes TIN coating - Asking price €760 Module 6 - 3 flutes TIN coating - Reground - 11.16 kg - Asking price €400 Module 7 - 3 flutes Reground - 11.41 kg - Asking price €430 Module 8 - 3 flutes Reground - 5.28 - Asking price €190 Module 8 - Reground - Asking price €450 Module 8 - TIN coating - Asking price €780 Module 10 - TIN coating - Asking price €790 Module 10 - Reground - Finished milling cutter - 0.515 kg - Asking price €320 Module 12 - 2 units - TIN coating - Finished milling cutter - Asking price €580 Module 13 - Finished milling cutter - Asking price €410 Nwedpsytrh Ejfx Alhsh Module 14 - Reground - 5.18 kg - Asking price €240 Module 16 - Asking price €600 Module 16 - Reground - 5.14 kg - Asking price €300 Involute angle: 20° BPII-Ü Bore diameter [mm] 40; 50; Groove [mm] 10: 12 Width [mm] 32.5; 45.5; 44; 17/21; 16/20; 14/18; 21/25; 18/22; 65/73; 48/57; 31; 66/72; 69/77; 70/78; 60/64; 60/66; 82; 72/80; 82; 40; 39; 47; 52; 56; 64 Outer diameter [mm] 169; 140; 141; 200; 150; 198; 195; 199; 197; 201; 200; 219; 192; 191 Manufacturer: Saazor - Wälztechnik ZORN GmbH & Co. KG Module 1 - 16 flutes TIN coating - one defect - 10.18 kg - Asking price €510 Module 1 - 16 flutes TIN coating - Asking price €590 Module 1.5 - 9 flutes Group milling cutter 9 flutes - Asking price €560 Module 2 - Pin milling cutter - Asking price €390 Module 6 - Pin milling cutter - Asking price €640 Module 10 - TIN coating - Asking price €350 Involute angle 20° DIN 3972 II - Ü or DIN 3972 II Kl. A - Ü Bore diameter [mm] 40 Groove [mm] 10 Width [mm] 52/60; 55/85; 60/90; 33/40 Outer diameter [mm] 176; 200; 198; 199 Manufacturer: Klingelnberg Module 2.5 - Asking price €360 Module 2.75 - Asking price €380 Module 3.25 - Asking price €170 Module 3.75 - Asking price €200 Module 4.5 - Asking price €220 Involute angle 20° Bore diameter [mm] 40 Groove [mm] 10 Width [mm] 30/38; 28/36; 35/42; 39/47; 44/52 Outer diameter [mm] 148; 149; 150 Subject to typing and calculation errors. Sales are exclusively within the EU countries.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,350 kg, maximum load weight: 28,650 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 435/50 r19,5, tire condition: 100 %, Additional Information Chassis, Semi-trailer, Transport Company Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins Attachment rail for aluminum ramps across the entire width Reinforced frame for vehicle loading Outer frame with Load-Lock profile approximately every 400 mm for securing lashing straps 10 pairs of lashing eyes recessed in the outer frame, each rated at 10 tons 24-ton, 2-speed support winch, single-sided operation, with semi-circular lower part and straight connecting plate, with extension compensation Nwjdpeld Ihlefx Alhsh Foldable rear support 2 chock blocks with holder Aluminum side underrun protection Galvanized steel underrun protection Quarter panel fenders in front of the 1st axle and behind each axle with anti-spray flaps behind each axle Pair of ferry eyes, yellow marked 1 spare wheel holder for 1 spare wheel, with wheel fastening kit 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) Container locking system, 4 pairs of locks recessed in the floor for 2 x 20 ft or 1 x 40 ft containers 10 pairs of lashing pockets recessed in the outer frame, internal dimensions 70 x 40 mm 10 lashing pockets recessed in the center of the floor, internal dimensions 70 x 40 mm 2 lashing/lashing bar rails recessed transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer lashing bars approx. 2170 mm), approx. 100 mm high. With 20 mm round steel rails, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). Bottom with an angle plate as a closure, open halfway downwards. For lashing and inserting lashing bars 80 x 80: Position 2 and 4 according to Fliegl data sheet 20 lashing bars, hot-dip galvanized Note: The lashing pockets / insertion pockets are not designed for the sole securing of long materials, pipes, etc. without wrapping. Storage space for aluminum access ramps, ramps can be slid in from the rear 3 pairs of folding eyes, 10 tons, in the outer frame (1x in front of the front wall and 2x in the rear area). Axles + Suspension SAF disc brake axles Axle / chassis laser-measured, reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, actuated by 3x brake (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no guarantee for tire damage 2 ride heights, adjustable via hand knob, 1 x for saddle height 980 mm, 1 x for saddle height 1100 mm (Note! Vehicle with tilt) Braking System 2-line pneumatic braking system Color-coded line routing for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The semi-trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve 2 ride heights, adjustable via hand knob, 1 x for saddle height 980 mm, 1 x for saddle height 1100 mm (Note! Observe overall height, exceeding height is at the customer's risk) Ride height in connection with lift axle, with the lift axle raised, the loading or overall height increases by 50 mm (with Mega Flex only at the lower ride height or saddle height) Vehicle - Driving stability system Wheels and tires 435/50 R19.5, manuf

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 23,000 kg, overall weight: 28,000 kg, axle configuration: 2 axles, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,638 mm, suspension: air, tire size: 235/75 r17,5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. More information Chassis, semi-trailer, transport company Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins Outer frame slightly inclined, new design with Load-Lock profile for attaching lashing straps 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without push-pull compensation Free support foot angle or free swivel radius to the rear, approx. 1920 mm 2 chocks with holder Aluminum side underrun protection Steel rear underrun protection Quarter panel fenders in front of and behind each axle 1 spare wheel holder for 1 spare wheel, with wheel fastening kit 1 plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Axles + Suspension Drum brake axles, selection according to manufacturer Laser-measured axle/chassis alignment, reduces tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring brake parking brake Duomatic connection at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Wheels and tires 235/75 R17.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 1 x 15-pin socket at the front, without connecting cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity, for forklift axle load up to max. 5,600 kg Front wall / corner posts 25 mm aluminum hollow profile, approx. 1,350 mm high, corner posts made of steel in a volumetric design Nwjdpfx Alokv Uvzoheh Country of approval / plates Germany with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame hot-dip galvanized including passivation, 15 years warranty against rust Front wall aluminum Note: These are archive images! Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,860 kg, maximum load weight: 28,140 kg, overall weight: 35,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235/75 17,5, tire condition: 100 %, Additional information Chassis Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins Recessed rail for loading ramps on the rear extension over the entire width, outer edge beveled to prevent damage. Reinforced frame for vehicle loading Outer frame with load-lock profile approx. every 400 mm for securing lashing straps 10 pairs of lashing eyes recessed on the top/outside of the outer frame, each 10 tons, starting after the neck area 24-ton, 2-speed support jacks, single-sided operation, with a flat mounting plate 2 wheel chocks with holder Aluminum side impact protection Galvanized steel underride protection Sheet metal as a splash guard riveted to the bottom, in the neck area above the center of the bogie axle and above the axle assembly Semi-elliptical fenders with anti-spray flaps according to EC Container locking system, 4 pairs of locking recesses recessed in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters (additional cross supports required at the front and rear of the container; the container must rest evenly across its width in conjunction with the locks; cross supports are not included) Attention! Damage to the platform floor is possible due to the cross supports! Rear extension, mechanical, with hand crank, extendable by approx. 1500 mm, lockable every 500 mm, including extendable underride protection with lighting (then the rear ladder is omitted) Covered with platform in the wheel arch area, with steel diamond plate in the center. Attention! Ramp loading at the rear is only possible with the rear extension in the retracted position! Storage space for loading ramps integrated in the rear extension, only usable when the rear extension is extended 1000 mm – then there is an overhang For transporting the ramps with the rear extension retracted, there is storage space for the ramps on the right side of the frame in front of the axles 1 pair of ramps, 3000 mm long, 300 mm wide, load capacity per pair 6000 kg (recessed rail for ramps on the rear extension) Nedpfjlf Dtmjx Alhowh Rear slope to approx. 500 mm Electric winch, 24 volts, pulling force approx. 8165 kg, mounted in the center at the front, operated with a wireless remote control, cable length 35 m x approx. 10 mm, with a cable guide and removable guide rollers Axles + Suspension Drum brake axles Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance functions up to an axle load exceedance of 30% and a speed of max. 25 km/h) with central lift arm Axle lift below the recommended ride height, therefore no guarantee for tire damage Braking system 2-line pneumatic braking system Color-coded lines for easy service. Spring parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles which guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Wheels and tires 235/75 17.5, manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 additional LED work lights at the rear, switched via the revers

Condition: good (used), machine/vehicle number: 3150, Year of construction: 2022, load capacity: 2,30,000 kg, lifting height: 200 mm, total length: 6,000 mm, total width: 3,000 mm, operation weight: 19,800 kg, Hedin FLATBED MOVER from Uniktruck Nsdoyuh N Ujpfx Alhjwh

Condition: like new (used), functionality: fully functional, mileage: 4,34,000 km, first registration: 06/2019, fuel type: diesel, empty load weight: 8,900 kg, maximum load weight: 9,100 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 6,800 mm, fuel: diesel, energy efficiency: C, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 11,000 mm, total width: 2,550 mm, total height: 2,730 mm, loading space length: 8,850 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, car registration, cruise control, full service history, onboard computer, power assisted steering, spoiler, tachograph, Dimensions – Body 9 m x 2.550 m x 2.73 m TAULINER BOX + SLIDING ROOF + 2,000 kg RETRACTABLE TAILGATE. Extras A/C, AUTOMATIC TRANSMISSION, ENGINE BRAKE, REAR AIR SUSPENSION, CRUISE CONTROL, CD RADIO, ON-BOARD COMPUTER, ELECTRIC WINDOWS, COLLISION CONTROL, LANE KEEPING ASSIST… Nwjdpszfah Aefx Alheh

Condition: repair required (used), mileage: 7,55,367 km, power: 338 kW (459.55 HP), first registration: 03/2015, fuel type: diesel, empty load weight: 15,060 kg, overall weight: 26,000 kg, tire size: 385/55 R22,5 - 315/70 R22,5, axle configuration: 3 axles, wheelbase: 5,100 mm, energy efficiency: A, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 16 m³, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: ABS, AdBlue, EBS, additional headlights, cruise control, differential lock, navigation system, parking heater, retarder, traction control, trailer coupling, Urea tank (AdBlue) Engine displacement: 11,120 cc 40 mm trailer coupling Hydraulics (auxiliary drive) Low noise Alloy wheels Euro 6 A Payload: 10,940 kg Long-haul driver's cab Automatic climate control Air suspension Trailing axle Sun visor Light bar Rotating beacons Nwsdpfxjzgfx Aj Alhjh Air horns 2 bunks WARNING: NOT ROADWORTHY!!!! Errors and omissions excepted.

Condition: used, mileage: 4,11,000 km, power: 265 kW (360.30 HP), first registration: 06/2011, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2026, color: orange, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, MAN TGS 18.360 BL ---- VEHICLE HISTORY ? VIDEO AVAILABLE UPON REQUEST ? GERMAN VEHICLE ? WELL MAINTAINED BY WORKSHOP VEHICLE EQUIPMENT ? AUTOMATIC TRANSMISSION ? 3-STAGE MOTOR BRAKE, VERY POWERFUL ? CRUISE CONTROL ? ACTIVE BRAKE SYSTEM ? STAND-ALONE AIR CONDITIONING ? NAVIGATION SYSTEM ? ON-BOARD COMPUTER ? HANDS-FREE SYSTEM ? REFRIGERATOR ? 1 X SLEEPER CABIN ? DIFFERENTIAL LOCK ? LEAF SPRING SUSPENSION (FRONT) ? AIR SUSPENSION (REAR) ? 1 X TANK ? AIR HORN ? SLIDING TARPAULIN ? EDSCHA TARPAULIN COVER ? LOAD SECURING TARPAULIN Nwsdezgzqujpfx Alheh ? TAILGATE: 1.5T CAPACITY ? TOOLBOX * PERMISSIBLE TOTAL WEIGHT: 18,000 KG * UNLADEN WEIGHT: 9,050 KG * PAYLOAD: 8,950 KG * LOADING AREA: * LENGTH: 7.30 M * WIDTH: 2.48 M * HEIGHT: 2.20 M FURTHER INFORMATION ? TIRE SIZE (FRONT): 315/70 R22.5 ? TIRE SIZE (REAR): 315/70 R22.5 ? VEHICLE AVAILABLE IMMEDIATELY ? VEHICLE READY FOR IMMEDIATE USE ----EXPORT / NOTE EXPORT SALES ONLY WITH A DEPOSIT (MIN. 500 – 2,000 EUR) FOR SALES TO EU AND NON-EU COUNTRIES, A DEPOSIT OF AT LEAST 500.00 EUR / 1,000.00 EUR WILL BE CHARGED. EXPORT REGISTRATION (EXW) POSSIBLE WITHIN 10 MINUTES (APPROVED EXPORTER). 5-DAY, 15-DAY, AND 30-DAY REGISTRATION PLATES, AS WELL AS 15-DAY AUSTRIAN REGISTRATION PLATES, ARE POSSIBLE. VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE E-MAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. SUBJECT TO CHANGES, ERRORS, AND PRIOR SALE.

Condition: good (used), Kolbus ECK 100 Automatic Corner Cutter Made in Germany, Kolbus GmbH & Co. KG. Very good condition. This is a professional, production-grade device for trimming corners for hardcover binding. Year of manufacture: 2009. Nwodsy Tu T Sepfx Alhjh Sturdy construction ensures precise operation. Interchangeable blades. Adjustable margins. One set of blades included. Compressed air powered.

Condition: good (used), HPM 92 Paper Cutting Guillotine Machine in very good condition, ready to work. Year of manufacture: 2009. High quality. Technical specifications: Cutting width: 920 mm Stack height: 120 mm Weight: 2500 kg 380V power supply Equipment: – Programming unit with color touchscreen monitor (Mitsubishi Manufactured) – Air table – Enlarged side tables – Photocells – Chrome table surfaces Nodjy Tu Snjpfx Alhewh – Spare knife Machine modeled after the German Polar, very solidly built, with Western electronics (Schneider, Mitsubishi, Eaton). Very stable rear frame construction, CNC rail guidance, ball screw drive.

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg Nwedpfxsy Tu Sbs Alheh The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Condition: used, functionality: fully functional, mileage: 2,60,000 km, fuel type: diesel, fuel: diesel, color: white, driver cabin: day cab, emission class: none, number of seats: 3, Year of construction: 1990, Equipment: crane, IVECO FIAT 145.17 4x2 - Year 1990 DIESEL/ Euro 0 Nedszf D Ndepfx Alhowh Mileage: 260,000 km Manual transmission/ Engine displacement: 5861 cc/ Power: 130 kW GVW: 145 quintals Payload: 6,800 kg/ Wheelbase: 5,000 mm Equipment: - Fixed body: 6250 mm x 2500 mm - HIDROCOM 100 AWV crane * 4 Outriggers

Condition: used, mileage: 4,32,389 km, power: 350 kW (475.87 HP), first registration: 09/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 07/2026, color: red, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, soot filter, Construction: Body/Superstructure: Flatbed + Crane, * Flatbed with aluminum sideboards, * Raised front panel, * Storage compartment, * Container locking system, * Roof spoiler (lockable) and side-mounted, * Steerable trailing axle, Crane: Palfinger PK 53002-SH, * Radio remote control, * 4-point outrigger support, Crane reach/lifting capacity: hydraulic: * 4.40 m = 10,400 kg * 6.10 m = 7,300 kg * 7.90 m = 5,500 kg * 9.80 m = 4,250 kg * 11.80 m = 3,400 kg * 14.00 m = 2,850 kg * 16.30 m = 2,450 kg Equipment: * Cab: L BigSpace, Cab: steel-sprung, Comfort, * Interior trim: Style-Line, * Cab: reinforced rear mounting, * Automatic climate control, Nodpfxszgy Uxo Alhewh * Electric auxiliary air conditioning, * Auxiliary heater (water), * Sliding/tilting sunroof (glass), * Additional thermal insulation, * Driver's seat: comfort suspension seat, * Co-driver's functional seat, * Upper comfort bunk, wide, * Upper PremiumComfort mattress, * Lower PremiumComfort mattress, * Trailer hitch with standard and DuoMatic braking connection, * Exterior sun visor, * Axle load - measuring device, Technology: * 12.7 cm info display with video function, * Audio system: radio with USB port, * Sound system, * Bi-Xenon headlights, * Ambient LED lighting, * CB radio, * Cooler box / refrigerator, * Light and rain sensor, * Circuit breaker, * Electrically adjustable and heated exterior mirrors, * Rotating beacons, Safety/Environment: * Driver's airbag, * Driver assistance system: roll control assistant, * Driver assistance system: Attention-Assist (fatigue detection sensor), * Driver assistance system: brake assistant (Active Brake-Assist), * Driver assistance system: lane keeping assistant, * Reinforced engine brake, * Differential lock on rear axle, * Emission standard EURO 6, Other: * German original delivery, * 1 previous owner, * Axle configuration: 6x2, * Wheelbase 5,500 mm * Suspension: air / air (full air), * Front axle tires: 255/40 R 22.5 * Rear axle + lift axle tires: 315/60 R 22.5 * Engine 12.8 L - 350 kW R6 Diesel (OM 471), * Payload 5.74 t, according to ZLB * Permissible total weight 26.00 t, Vehicle and crane have been regularly serviced. Since 1972, we have been your reliable partner for all things automotive/commercial vehicles in 28832 Achim, near the Bremen motorway junction. NutzfahrzeugZentrum Behnke always has approximately 200 vehicles on offer from the fields of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will be happy to prepare an individual offer for you! We would be pleased to accept your commercial vehicle/construction machine in part exchange. If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional cost. The information provided in advertisements, on the internet, in price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. The listed features may need to be checked separately. Errors and prior sale are subject to change.

Condition: new, mileage: 500 km, power: 367 kW (498.98 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Tatra Phoenix 6x6x6 all-wheel drive with Fassi crane with jib and winch New vehicle with daily registration 07/2024 Long-haulage cab Removable flatbed Can be used as a tractor unit Tatra specifications coming soon Crane: Fassi F545RA2.27 Stability control V7 remote control Jib / auxiliary boom L214, 4-way V20 winch with 60 m cable AWC Front outriggers Nwedpfozgzbaex Alhsh 5-way outriggers etc. Further information coming soon.

Condition: used, mileage: 4,54,907 km, power: 158 kW (214.82 HP), first registration: 09/2014, fuel type: diesel, overall weight: 1,19,990 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2026, color: red, gearing type: mechanical, emission class: euro6, loading space volume: 36 m³, loading space length: 6,230 mm, loading space width: 2,450 mm, loading space height: 2,360 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, 6-speed manual transmission/air conditioning/auxiliary heater/engine brake/TCS cruise control/differential lock/BÄR BC S4 2000kg tail lift/Libner EUROLIB body, loading area 6.23 x 2.45 x 2.36m Nwsdpfx Ajzg Ekrslhjh ----As inspected or offered, without any further services/accessories. Our offer generally does not include a new TÜV (technical inspection) approval. If a new TÜV approval is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle may have advertising applied and/or be labeled. Our general terms and conditions of delivery and payment apply. We will assist you with export, preparation of export documents, obtaining license plates, supplier declaration, etc.! The information provided in advertisements, on the internet, in price tags and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical and data transmission errors. The listed equipment may need to be checked separately. We expressly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. No guarantee is given for the accuracy of the accessory information. Subject to change, prior sale or errors. We strongly recommend and offer an inspection and examination so that the buyer does not have any false ideas about the condition and suitability. The tarpaulin can be labeled; images may be edited. We sell exclusively according to our general terms and conditions, excluding any warranty, subject to errors, typographical errors and prior sale. Inspections and examinations are possible at any time by appointment and are expressly desired.

Condition: used, mileage: 2,57,277 km, power: 200 kW (271.92 HP), first registration: 08/2017, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, color: white, gearing type: automatic, emission class: euro6, loading space volume: 31 m³, loading space length: 5,720 mm, loading space width: 2,500 mm, loading space height: 2,200 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, PS Transmission/Air conditioning/Engine brake/Steering booster/Trailer hitch, Body= 5.72 x 2.50 x 2.20, BÄR BC 2000kg LBW Special equipment: Trailer brake 2-line, Trailer coupling: Center axle trailer G 145, Trailer socket 24V / 15-pin, Work lights in front of the rear axle (maneuvering aid), Audio system: CD radio (Bluetooth), Battery 165 Ah, Differential lock rear axle, Medium-sized compressed air unit, Driver assistance system: Brake assist (Active Brake-Assist), Driver assistance system: Lane keeping assist, Suspension: Front springs 5.1 t, Electric windows, Generator 100 A, LED lighting package, Enhanced engine brake, Spare wheel, Reversing warning signal (audible, external), Switch for loading platform, Rear cross member for trailer coupling (center axle trailer), Seats in the cab: Driver's seat armrest, Seats in the cab: Driver's seat comfort suspension seat, Sun visor, exterior, 12V / 15 A socket in the dashboard, Underrun protection, side, Toll collection system preparation Additional equipment: Emission standard EURO 6, Axle configuration: 4x2, Approach/front mirrors, Exhaust pipe to the center of the vehicle, Exterior mirrors, electrically adjustable, left, Cockpit Classic, Compressed air tank, steel, Entry, two-step, Cab: S ClassicSpace, Cab variant: ClassicSpace, Suspension: Leaf/air, Urea tank (AdBlue): 25 L, Manual sunroof (steel), Rear axle, bevel gear 390, Info display 10.4 cm with additional display, Body/structure: Chassis, Fuel tank: 120 L, Engine 7.7 L - 200 kW R6 Diesel (OM 936), Engine compartment encapsulation, Wheelbase 4160 mm, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Front passenger single seat, fixed, Splash guard, rear fender, Stabilizer, rear axle, Steel rims 7.50x19.5, Tachograph / EC control unit, Underrun protection, rear, fixed, Underrun protection, front, Immobilizer, Permissible total weight 15.00 t----As inspected or offered, without any further services / accessories. Our offer generally does not include a new TÜV (technical inspection) certificate. If a new TÜV certificate is desired, we will gladly provide you with an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We will support you with export, preparation of export documents, procurement of license plates, supplier declaration, etc.! The information given in advertisements, on the internet, on price tags and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/guarantee for typing and data transmission errors. Listed equipment may need to be checked separately. We explicitly reserve the right of prior sale, as we also offer this item on other platforms. No guarantee for accessory information. Changes, prior sale or errors and omissions excepted. We strongly recommend and encourage an inspection and check so that there are no false ideas about the condition and suitability for the buyer. The tarpaulin can be labeled, images edited. We only sell according to our general terms and conditions, excluding any warranty, errors, typing errors and prior sale. Nwodpjzg Ei Uefx Alhjh Inspections and checks are possible at any time after making an appointment and are expressly desired.

Condition: used, first registration: 06/2018, Manufacturer: Sonntag Type: Platform/Flatbed with sliding tarpaulin Vehicle Type: Body Year of Manufacture: 2018 Cargo Area: 7.20 x 2.50 x 2.75 m, towing eyes, frame width (H+V): 86.5 cm. Nwedpfxjzg Ehwe Alhjh As inspected or offered, without any additional services/accessories. Our offer generally does not include a new TÜV (technical inspection) certificate. If a new TÜV certificate is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle may be covered with advertising or have lettering. Our general terms and conditions of delivery and payment apply. We will assist you with export, preparation of export documents, procurement of license plates, supplier declaration, etc.! The information provided in advertisements, on the internet, in price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may need to be checked separately. We expressly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. No guarantee is given for the accuracy of accessory information. Subject to change, sale in the meantime, or errors. We strongly recommend and offer an inspection and examination so that the buyer does not have any false impressions about the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired.

Condition: used, mileage: 5,63,249 km, power: 331 kW (450.03 HP), first registration: 07/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 07/2026, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, loading space volume: 15 m³, loading space length: 6,750 mm, loading space width: 2,450 mm, loading space height: 96 mm, Equipment: ABS, air conditioning, crane, parking heater, soot filter, Opticruise without clutch / automatic climate control / auxiliary heater / retarder / air-suspended rear axle / trailing lift axle / aluminum rims Nsdpfezg Egtsx Alhowh HIAB 166 K PRO 3000 11m = 1560kg with Kinshofer KM 401H stone clamp 2500kg ----As inspected or offered, without any further services / accessories. Our offer generally does not include a new TÜV (technical inspection) certificate. If a new TÜV certificate is desired, we will gladly provide you with a quote from our partner workshops! The vehicle may have advertising applied and/or be labeled. Our general terms and conditions of delivery and payment apply. We will assist you with export, preparing export documents, obtaining license plates, supplier declarations, etc.! The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability / warranty for typing and data transmission errors. The listed equipment may need to be checked separately. We expressly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. No guarantee is given for the accuracy of accessory information. Subject to change, prior sale, or errors. We strongly recommend and offer an inspection and verification so that the buyer does not have any false impressions about the condition and suitability. The tarpaulin can be labeled; images may be edited. We sell exclusively according to our general terms and conditions, excluding any warranty, errors, typos, and subject to prior sale. Inspections and verifications are possible at any time by appointment and are expressly desired.