Used Engel Vertical Injection Molding Machine for sale (67,000)

Condition: used, Year of construction: 2002, functionality: fully functional, Used KraussMaffei KM 65-160 C2 injection molding machine, manufactured in 2002, with extensive peripherals and a Frigel process cooler. Manufacturer: KraussMaffei Model: KM 65-160 C2 Machine type: Injection molding machine Year of manufacture: 2002 Machine no.: 641736 Clamping force: 650 kN / 65 t Machine weight: 3,200 kg Operating time: 11,481:37 h Operating voltage: 400 V Phases: 3 Frequency: 50 Hz Total current: 153 A Fgedpjz Almrsfx Ap Dsh Motor current: 30 A Pre-fuse: 160 A Control system: KraussMaffei Peripherals: Material supply, MTF elevating conveyor, drum, flow monitoring / temperature control circuits, and Frigel process cooler Frigel process cooler: RCD80/12HP Year of manufacture of process cooler: 2013 Voltage: 400 V Auxiliary voltage: 110 V Frequency: 50 Hz Max. current draw: 29 A Refrigerant: R407C Refrigerant charge: 2.4 kg Medium: Water Temperature range: -5 to +90 °C Max. pressure: 8 bar Weight: 240 kg Available from APRIL 2027

Condition: excellent (used), Year of construction: 2014, KRAUSS-MAFFEI KM 420-4300 CX injection molding machine Year of manufacture: 2014 Control system: MC6 Plasticizing unit: 4300 Screw diameter: 90 mm Control system MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlight, and visualization of all running processes via ProcessDesigner. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion-resistant design. Screw diameter: 90 mm Fedpfx Apszvmx Ne Dogh Backflow valve: yes Nozzle: open Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping unit Clamping force: 4200 kN / 420 t Maximum mold opening force: 250 kN Dimensions of mounting plates (H × V): 1270 × 1230 mm Distance between columns (H × V): 800 × 800 mm Maximum mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum distance between plates: 1400 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Standard injection rate: 604 cm³/s Injection rate with accumulator: 1909 cm³/s Standard screw speed: 195 rpm PS plasticizing rate at standard speed: 134 g/s PS plasticizing rate at increased speed: 186 g/s Nozzle clamping force: 129 kN Electrical and hydraulic system Rated power of pump motor: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 560 mm Oil tank capacity: 1000 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.5 × 2.4 m Net weight including control cabinet: 25.5 t

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras - Core pull Fgodpfx Apjyc Ewxs Dsh The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: used, Year of construction: 2002, functionality: fully functional, Manufacturer: KraussMaffei Type: KM 300-1400 C2 Machine type: Injection molding machine Year of manufacture: 2002 Machine no.: 254603 Machine weight: 12,500 kg Clamping force: 3,000 kN Control system: KraussMaffei machine control system with screen operation Operating hours according to display: 96,208 h Material supply: Material conveying/dosing components installed on the machine Hydraulics: Rexroth components visible Peripheral control: RMS Systems Touch Control available Conveying technology: Discharge/conveyor belt available Cooling unit 1: Frigel RCM80/6HP Year of manufacture, cooling unit 1: 2012 Voltage, cooling unit 1: 400 V Fjdpoz Alpgsfx Ap Dogh Max. current, cooling unit 1: 17 A Refrigerant, cooling unit 1: R407C Refrigerant charge, cooling unit 1: 2.4 kg Weight, cooling unit 1: 200 kg Cooling unit 2: Frigel RCD80/12HP Year of manufacture, cooling unit 2: 2013 Voltage, cooling unit 2: 400 V Max. current, cooling unit 2: 29 A Refrigerant, cooling unit 2: R407C Refrigerant charge, cooling unit 2: 2.4 kg Weight, cooling unit 2: 240 kg Location: Freiburg Available from APRIL 2027

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 Year of construction: 1999 Injection unit: Screw diameter: 35mm Injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - clean production conditions Euromap 12 Robot interface Core pull control Hardened injection unit - bimetal Dimensions Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Fgjdpfxoz Iq Hfe Ap Djh Drive: Pumps/motor: 15 kW Heating output: 6.5 kW Total output: 21.5 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2010, Arburg 470H 1000-400 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of manufacture: 09.2010 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Platen size: 637x637 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy efficient and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 1 Hot runner control x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor with inverter drive - energy saving The injection unit is driven by a servo motor controlled by an inverter Machine equipped with cylinder/bottle with compressed nitrogen (additional load for fast operation) Central lubrication Fsdpfxoz Ipyqe Ap Dsgh Integrated sorting flap Arburg Multilift Select robot 6kg transverse Year of manufacture: 09.2010 4-axis robot: 3 axes driven by servo motors (electric); C-axis - pneumatic Travel paths in axes: X-400, Y-600, Z-1800 Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 5180 kg Length/Width/Height: 4.40x1.56x2.02 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), functionality: fully functional, Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 55 CZ Control system: MC 4 Year of manufacture: 2004 Operating hours: 76,000 h Technical data, clamping unit side Clamping force: 4200 kN Tie bar spacing h x v: 800 x 800 mm Platen size h x v: 1270 x 1200 mm Minimum mold height: 380 mm Maximum mold thickness: 1400 mm Opening stroke: 1020 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 6700 kg Fgedpfezypcfjx Ap Djh Technical data, injection unit side Screw diameter: 70 mm Injection volume: 1047 ccm Injection pressure: 1778 bar Screw length: 20 l/d Screw speed: 527 rpm Plasticizing rate: 95 g/s PS Free injection rate: 953 g/s PS Number of heating zones: 6 Dimensions & Weight Machine dimensions L x W x H: 9.83m x 2.33m x 2.48m Total weight: 23090 kg Equipment • Screen text in German • Hydraulic core pull, 6x • Machine without handling system • Machine without material hopper • Leveling elements • Tool heating, 16x • Two-component injection molding machine

Condition: excellent (used), Manufacturer: ARBURG Type: Allrounder 375 V 500-170 Control system: Selogica-direkt Year of manufacture: 2013 Operating hours: 36163 h Technical data, clamping unit Clamping force: 500 kN Minimum mold height: 200 mm Maximum mold height: 550 mm Maximum mold thickness: 302 mm Opening stroke: 225 mm Rotating platen diameter: 900 mm Ejector force: 70 kN Centering of moving platen diameter: 125 mm Mold weight: 230 kg Technical data, injection unit Screw diameter: 25 mm Injection volume: 59 cm³ Injection pressure: 2500 bar Screw length: 24 l/d Screw speed: 35 rpm Screw torque: 210 Nm Number of heating zones: 5 Fgjdpfx Apszyn Exo Dsh Dimensions & Weight Machine dimensions L x W x H: 3m x 1.6m x 3.48m Total weight: 3540 kg Equipment • Screen text in German • Rotating platen • Hydraulic core pull (1x) • Machine with water manifold • Machine without material hopper • Leveling elements • EUROMAP 67 handling interface • EUROMAP 73 interface • Interface for ejector plate locking

Condition: excellent (used), Year of construction: 2010, ARBURG 370 U 600-290 injection molding machine Year of manufacture: 2010 Fjdpozw Azvjfx Ap Dsgh Clamping unit Clamping force: 600 kN (60 tons) Distance between tie bars (H × V): 370 × 370 mm Dimensions of mounting platens (H × V): 510 × 510 mm Minimum mold height: 200 mm Maximum daylight opening: 600 mm Opening stroke: 400 mm Ejector stroke: 125 mm Ejector force: 30 kN Injection unit Screw diameter: 35 mm Injection volume: 144 cm³ Injection shot weight (PS): 132 g Maximum injection pressure: 2000 bar Screw L/D ratio: 20 Screw torque: 450 Nm Maximum injection speed (PS): 140 g/s Number of heating zones: 4 Nozzle stroke: 240 mm Dimensions and weight Machine dimensions (L × W × H): 3.80 × 1.45 × 2.12 m Total weight: approx. 3,500 kg

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 48 mm, clearance between the columns: 460 mm, displacement volume: 371 cm³, injection pressure: 1,630 bar, injection weight: 341 g, mold height (min.): 160 mm, ejector force: 42 N, ejector stroke: 140 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,200 mm, total width: 1,250 mm, total height: 1,800 mm, overall weight: 5,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 114 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN160A5-IU604 D=48 Fsdpfxozz Spdo Ap Djgh Clamping force: 160T Tie bar spacing: 460x460 Tool installation height: 160 to 520 Robot interfaces: Euromap 67, Euromap 18 Basic standard equipment Suitable 12 kg linear robot available upon request. Optional equipment: CE standard Quick-change version of the plasticizing unit with Harting interface 1 set of core pull Dosing signal interface with HAN-3A connector KEBA 1000 1 set with 6 glass flow meters EU67

Condition: good (used), Year of construction: 2006, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: KM420-1900C2 Fodpfezl Sfmjx Ap Djgh Baujahr: 2006 Schließkraft: 420 Tonnen Holmabstand 800 x 800 mm Schnecken DN: 70 mm Max. Hubvolumen: 1.047 cm³ Spritzteilgewicht: 853 g/PS Steuerung: MC5 Ausstattung: 2 St. Kernzug Roboter SEPRO, Typ: SR4030 S3 VISUAL, Baujahr: 2006 12- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 22,00,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s Fodpfxow U N Ixo Ap Degh - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg TECHNICAL DATA (BY SCREW DIAMETER) ----- Fgodpfsx Sqi Hex Ap Deh Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). INJECTION UNIT FEATURES ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Condition: excellent (used), Year of construction: 2005, Arburg 1200T 800-150 / Vertical Injection Molding Machine with Rotary Table Year of Manufacture: 2005 Injection Unit: Screw Diameter: 25 mm Injection Weight: 45 g Injection Pressure: 2500 bar Dosing Volume: 54 cc Clamping Unit: Clamping Force: 80 t Tiebar Distance: 0 x 0 mm Clamping Platen Size: 1200 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control System: SELOGICA Additional Equipment: Air Valves x 6 Hydraulic Core Pullers x 6 Control System with Hot Runners Injection Unit Hardened - Bimetal Rotary Table Diameter: 1200 mm Kistler Sensor - Mold Pressure Control Machine serviced by the authorized Arburg Service Center in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92 x 1.61 x 3.78 m Drive: Pump/Motor: 22 kW Heating power: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Fgjdpfx Aoz Iq E Ujp Deh Price: Upon request

Condition: excellent (used), Year of construction: 2005, Arburg 320A 500-170 with the sprue picker / electric machine Year of manufacture: 2005 Fgjdpez Iqxhsfx Ap Dsh Injection unit: Screw diameter: 35 mm injection weight: 105 g Injection pressure: 1470 bar Metering volume: 115 ccm Clamping unit : clamping force: 50 t tie bar distance: 320x320 mm size of clamping platens: 446x446 mm ejector: electric clamping unit: toggle lever Control system: SELOGICA Additional equipment: Electric machine: high speed, energy saving and very quiet. Euromap 67 Robot interface injection unit hardened - bimetal Central lubrication Machine with the built-in conveyor belt Arburg and original sorting flap Dimensions: Weight: 3500 kg Length/width/height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating power: 5,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot Year of manufacture - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. PV - adjustment of the injection unit. MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit Fgodpfx Ajtrya Rop Doh - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment - rated power of pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71

Condition: excellent (used), Year of construction: 1999, Arburg 221KS 250-75 / Universal machine Year of manufacture: 1999 injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2350 bar Metering volume: 31 ccm Clamping unit: Clamping force: 25 t tie bar distance: 221 mm size of clamping platens: 342x250 mm ejector: hydraulic clamping unit: toggle lever Fodpfxsz Iqpto Ap Dogh Control system: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core pull control injection unit hardened - bimetal Clamp for fixing the injection unit vertical Dimensions: Weight: 1150 kg Length/width/height: 2.63x1.34x1.93 m Drive: Pump/motor: 5.5 kW Heating power: 4,6 kW Total power: 10,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Year of construction: 2002, condition: ready for operation (used), An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible. Fodpfxsyddy Io Ap Dogh

Condition: excellent (used), Year of construction: 2008, Battenfeld HM 100/525 with Battenfeld R10S Robot / Operating Hours: approx. 19,000 in automatic mode Year of manufacture: 2008 Injection Unit: Screw diameter: 40 mm Shot weight: 228.4 g Injection pressure: 2,100 bar Dosage volume: 251 ccm Clamping Unit: Clamping force: 100 t Tie bar spacing: 470x420 mm Platen size: 680x663 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 - touchscreen Fgjdpfoz Ipi Ejx Ap Dsh Additional equipment: Machine in very good technical condition Operating hours: approx. 19,000 in automatic mode Total operating hours: 26,580 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Battenfeld R10S Robot Year of manufacture: 2015 5-axis robot: 3 axes powered by servomotors (electric); axis B - pneumatic, axis C Robot with adapter Purchase of robot at extra cost Dimensions: Weight: 4,600 kg Length/Width/Height: 4.23x1.41x2.05 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our premises in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2021, operating hours: 5,646 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 201 cm³, plate length: 670 mm, plate height: 670 mm, total length: 4,300 mm, total width: 1,600 mm, total height: 2,000 mm, overall weight: 3,900 kg, Equipment: documentation/manual, KraussMaffei KM 80-380 CX Stock No.: 503703 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 CX Control System: MC6 Year of Manufacture: 2021 Operating Hours: 5646 h Technical Data - Clamping Unit Clamping Force: 800 kN Tie Bar Spacing h x v: 420 x 420 mm Platen Size h x v: 670 x 670 mm Minimum Mold Height: 250 mm Maximum Mold Height: 750 mm Opening Stroke: 500 mm Ejector Stroke: 150 mm Ejector Force: 43 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Technical Data - Injection Unit Screw Diameter: 40 mm Injection Volume: 201 cc Injection Pressure: 1860 bar Screw Length: 20 l/d Free Injection Flow Rate: 295 g/s Number of Heating Zones: 5 Dimensions & Weight Machine Dimensions L x W x H: 4.3 m x 1.6 m x 2 m Total Weight: 3900 kg Equipment 3 freely programmable inputs and outputs Screen text: German Screen text: Polish CEE socket 16A CEE socket 32A Increased ejector force Hydraulic core pull 1x Air valve 1x Machine with material hopper Machine with water manifold Leveling elements Plasticizing unit, highly wear-resistant and corrosion-resistant BDE interface Interface for color dosing unit USB interface Fedpfjz Ayi Uex Ap Dogh Schuko socket 10A

Condition: excellent (used), Year of construction: 2008, Arburg 520S 1300-800 / machine in very good technical condition Year of manufacture: 2008 injection unit: screw diameter: 50 mm injection weight: 359 g Injection pressure: 2000 bar Metering volume: 392 ccm Clamping unit: clamping force: 130 t tie bar distance: 520x520 mm size of clamping platens: 695x695 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Fgsdsz Ip Afspfx Ap Djh Air valve x 2 injection unit hardened - bimetal The machine was regularly serviced by the authorized service Arburg in Germany Dimensions: Weight: 6450 kg Length/width/height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 35-55 CX / machine in very good technical condition Year of manufacture: 2008 injection unit: Screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit : clamping force: 35 t tie bar distance: 320x320 mm size of clamping platens: 540x540 mm Ejector: hydraulic clamping unit: hydraulic Control: MC V - touch screen Fgjdez Iqm Sepfx Ap Doh Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Air valve x 2 Control with hot runners x 6 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service Krauss Maffei in Germany. It is possible to change the screw diameter for fi 20 mm, 22 mm Dimensions: Weight: 2600 kg Length/width/height: 3.50x1.40x1.70 m Drive: Pumps/motor: 11 kW Heating power: 3,78 kW Total power: 14,78 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1999, Arburg 221KS 250-75 / Universal machine Year of manufacture: 1999 injection unit: Screw diameter: 20 mm injection weight: 26 g Fgedpfez Iqqqjx Ap Deh Injection pressure: 2350 bar Metering volume: 31 ccm Clamping unit: Clamping force: 25 t tie bar distance: 221 mm size of clamping platens: 342x250 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core pull control injection unit hardened - bimetal Clamp for fixing the injection unit vertical Dimensions: Weight: 1150 kg Length/width/height: 2.63x1.34x1.93 m Drive: Pump/motor: 5.5 kW Heating power: 4,6 kW Total power: 10,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2001, Arburg 320K 700-100 Year of construction: 2001 Injection unit: Screw diameter: 30 mm Injection weight: 59 g Injection pressure: 1550 bar Dosing volume: 70 ccm Clamping unit : Clamping force: 70 t Distance between tie bars: 320x320 mm Size of the clamping platens: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control system: SELOGICA Additional equipment: Hydraulic core pull x 1 Hardened injection unit - bimetal Central lubrication Original Arburg mold crane, 2 lifting speeds, lifting capacity 100 kg Dimensions: Weight: 2170 kg Length/width/height: 2.94x1.45x1.99 m Drive: Pump/motor: 11 kW Heating output: 4.9 kW Total output: 15.9 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Fgodpfx Apoz Iq Dko Dsh Price: On request

Condition: excellent (used), Year of construction: 2006, LWB Steinl VCRS-T 300/36 T / Machine like new Year of construction: 2006 Spraying unit: Metering volume: 36 ccm Fgodpfx Apez Iqfno Dsh Clamping unit: Clamping force: 30t Ejector: hydraulic Clamping unit: hydraulic Control system: LWB ECO Additional equipment: Hydraulic core pull x 1 Control unit with air valve The injection unit is made of bimetal Dimensions: Weight: 3000 kg All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: On request