Used Ew Menn Gw-63 for sale (6,088)

Year of construction: 1982, condition: good (used), width 630mm length of the tops about 2500mm Dwsdpeimd Ibsfx Ap Dsc culaga adjustable at an angle and top and bottom table adjustable up and down manually machine ready to work, technically in good condition,

Year of construction: 1992, condition: not inspected (used), Bagging machine and net clipper, double unit, manufacturer Strapack, for apples, potatoes, 1-5 kg capacity. The machine is in very good condition and was in operation for only about 10 years. The machine has 4 bagging stations, which allows for a throughput of approximately 15-20 2 kg bags per minute. The machine is complete with all accessories and ready for operation. The machine has been fully overhauled; price upon request. Dedpfx Apshh Idre Dewc I am also selling SPARE PARTS for EW20, EW10 and net clippers UC20. If interested, please contact:

Condition: good (used), Year of construction: 2015, This inspection system is from Zumbach Electronics AG at Plastima Used Machinery in machine storage. The machine is from 2015 and is in good condition. - Brand Zumbach Electronics AG - Type Simac 63 - Year of construction: 2015 - Number of cameras 3 Dodpfx Apstpnfbo Djwc - Pipe diameter min. 2 mm - Pipe diameter max. 50 mm

Condition: used, Tool holder, tool holder, milling holder, milling tool, chuck, milling cutter holder -Manufacturer: Eroglu, cutter holder with coolant channel in original packaging -Type: HSK 63-12-80-K .: A63.04.12.K -Transport dimensions. 470/100/H95mm -Weight: 1.2 kg Dwsdpfxjr Dgi Tj Ap Djc

Condition: used, Gear motor, electric motor -Speed: 63 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 28 mm -Protection class: IP 44 Dsdec U Dn Sepfx Ap Djwc -Number: 1x geared motors available -Price: per piece -Weight: 19 kg

Condition: used, Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder Dwjdpfx Apodkpa Nj Dsc -Type: DFM-63-80-B-PPV-A-GF -Piston: Ø 63 mm -Stroke: 80 mm -pneumatic: cushioning -both sides: adjustable -Gliding guide -Weight: 7.34 kg

Condition: good (used), Three-phase motor, electric motor -Power: 0.25 kW -Speed: 2800 rpm -Shaft: Ø 11 mm -Design: B3 Dwedpsb A R A Nsfx Ap Doc -Protection class: IP 55 -Weight: 7 kg

Condition: good (used), Pipe peeling device, rotary peeling device, plastic pipe cutter, plastic pipe peeler, plastic pipe welding device -Diameter: Ø 63 mm -Weight: 0.6 kg Dwedpfx Apsb A Hdio Djc

Condition: good (used), Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 63 A -Connection: 220 volts Dsdpfxob A Nape Ap Dowc -Weight: 110 kg

Condition: used, Flange connection, V-flange, pipe coupling, welding reduction, reduction, clapper base, pipe bend, welding bend, pipe angle Dwedpeq N E Rujfx Ap Dsc -Pipe elbow: welding elbow 90° 63 pieces -Type: Ø 140 mm x 4.0 mm 49 pieces. -Type: Ø 139.7 mm x 4.0 mm 14 pieces. -Material: P235 GHTC1, see photo parts list -Price/tax: complete -Stock: other sizes/types also available, please inquire -Transport dimensions: 1200/800/H760 mm -Weight: 256 kg

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 1,5 EW20° 3GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort Dwjdpfxeuayy He Ap Dsc - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: Radial fan type DG 63 b -Motor: Dietz 0.125 kW 2845 rpm -Volume flow: 6 m³/min / 360 m³/h -Connection: inlet Ø 58 mm -Connection: output Ø 75 mm Dwsdet Rbhzepfx Ap Djc -Dimensions: 380/250/H360 mm -Weight: 9.2 kg

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: 5053-4053142274002, power: 30 kW (40.79 HP), Bar shears, make Peddinghaus, type Caddy 63 Technical data: Shearing force/diameter (max.): 2000 kN/63 mm Dedpetukpaofx Ap Djwc Drive power: 30 kW Equipment/special feature: bar magazine, 6 m

Condition: good (used), Two Messer Griesheim UNITIG GW 450 TIG welding machines are for sale. Water cooling, proven thyristor transformer technology, simple operation, before gas supply - after gas, forced shutdown, ramp-down, crater filling, any material incl. weldable aluminum, HF ignition, stick electrode welding, 1-6mm, ammeter, change in aluminum penetration + points, rectangular sine in the AC Super Alu range. Weight: 420 kg Dwodpfx Apou Sqi Sj Doc The price is per welding machine.

Condition: used, mileage: 63,353 km, power: 265 kW (360.30 HP), first registration: 04/2024, fuel type: diesel, number of seats: 44, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,050 mm, total height: 3,210 mm, Year of construction: 2024, Equipment: ABS, air conditioning, disability-friendly, = Additional Options and Accessories = Dedpswx N Afofx Ap Dowc - Air conditioning - Wheelchair lift - USB connections - Webasto = Additional Information = Damage: none = Company Information = We are an international company based in Belgium, in the Brussels area (+/- 20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have a large number of buses of all brands, capacities, and models in stock, covering every price range. We can find the right tour bus, school bus, or city bus for you, tailored to your needs or your budget. All information is provided without guarantee. Errors, prior sale, and typographical errors excepted. Opening hours for viewing used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Dwodek S Htxjpfx Ap Doc Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: like new (used), Year of construction: 2021, Almost New: Complete Compaction System Ludden & Mennekes SVS11+KEV 1. Stationary Screw Compactor L&M SVS 11 Virtually unused, stationary screw compactor (~1 month) designed for filling compaction containers and/or other containers. The machine is constructed from a robust, welded steel frame with continuously welded seams. Its low-maintenance screw compaction system is suitable for continuous feeding, and the compaction chamber does not require periodic cleaning. Dwjdpfxjz Eg Dzs Ap Djc Main technical specifications Overall length: 2,480 mm Overall width: 1,660 mm Overall weight: 2,300 kg* Loading height: 1,350 mm Feed opening: 1,375 × 1,490 mm Screw diameter: 750 / 500 mm Screw speed: 17 rpm Drive power: 11 kW Residual-current device / Fused plug Type B / 300 mA 2. Hydraulic Container Coupling/Decoupling System Hydraulically operated coupling and decoupling system with forward and reverse movement. The hooking grippers are operated manually. Designed for the secure connection of different types of compaction containers. 3. L&M KEV Cardboard Intake/Deflection and Pre-Shredding Unit Virtually unused L&M KEV coarse shredding unit for bulky cardboard packaging, cardboard tubes with cores, and other large-format packaging materials. The material is reduced to a size suitable for efficient compaction, helping to improve compactor utilization and reduce disposal costs. The unit can be installed above L&M self-compacting containers or stationary compaction systems so that shredded material falls directly into the filling opening. Main technical specifications Dimensions (L × W): 1,230 × 1,490 mm Shredding shaft width: 1,400 mm Cutting knife diameter: 585 mm Number of cutting knives: 9 Feed opening: 960 × 1,400 mm Drive power incl. power supply: 2.2 kW + 0.75 kW 4. L&M PCS 6500 Compaction Container Main technical specifications Capacity: 32 m³ Dimensions: 6,500 × 2,500 × 2,600 mm PRICE ON REQUEST

Condition: used, Technical details: revolution per minute: Motor: 1430 U/min voltage: 380 V / Hz weight: 125 / Gerät kg dimensions: L:680 x B:850 x H:750 mm 2 pieces RADAX high pressure tube fan for dusty air mixture 3-Ph; IE3 06717 external control motor ADDA drive technology, IP55 Ø of the ventlator 650mm Dwedpfju Nww Dsx Ap Dsc 2x flange with 16 holes -hole circle Ø 700mm *

Condition: used, Technical details: turning length: 630 mm swing diameter over slide rest: Hinterdrehschlitten: 250 mm center height over bed: 270 mm centre distance: 900 mm spindle bore: 26 mm range of revolutions per minute - continous: 1,8 - 450 U/min return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min cross feed: 0,07 - 1,11 / 36 step mm/U longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U tailstock quill taper MT: 5 quill travel: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,9 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Dwjdpfx Aevbh N Rjp Djc Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swiveling range of the rear slide = 360deg. Swiveling range of the cross slide = 360degrees Equipment: lathe chuck driving disc Ø 210 mm with fixed tip fixed tip in tailstock with 4 pieces machine feet 3 jaw chuck Ø 250 mm i.D. *

Condition: used, Year of construction: 1963, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 620 mm turning length: 3150 mm centre distance: 3150 mm turning diameter in the gap: 1200 mm length of gap: 800 mm weight of the machine ca.: 11,5 t Dwodpeu Ix Arofx Ap Dsc dimension machine approx.LxWxH: 7,5 x 1,5 x 1,7 m incl. 2x steady rests and various tips *

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm y-travel: 460 mm z-travel: 510 mm control: 3D Heidenhain i TNC 530 table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Revolution per minute: 20 - 10.000 U/min. tool changer with: 20 place spindle hours: 36.050 h operating hours - idle run: 91.000 h total power requirement: 13,9 kW Weight approx.: 3,6 t tool taper: SK 40 Dwsdpfxjw A I Uus Ap Dec Tool changer: 20-fach dimension machine approx.LxWxH: 3,0 x 2,0 x 2,15 m

Condition: excellent (used), Year of construction: 2014, Number of axis: 4 Dwedez E Rkfspfx Ap Djc Reach: 3000 mm Payload: 10 kg

Condition: new, Year of construction: 1992, power: 2,500 kW (3,399.05 HP), input current: 192 A, overall weight: 9,900 kg, type of cooling: water, Induction motor SIEMENS 1SN 1634-4 HP 90-Z 1992, H-module, all documents included Power: approx. 2.5 MW Voltage: 11 kV Dedpfx Aevu T Sqop Djwc Speed: ~1480 rpm

Condition: excellent (used), functionality: fully functional, overall weight: 1,400 kg, Olma precision thickness planer, 630 mm, 4-knife cutterhead, electric thickness table adjustment. Djdpjz Hzv Isfx Ap Dswc

Condition: used, Year of construction: 2005, Fritz Werner TC630-N CNC 5-axis (3 + 2) horizontal machining centre with Siemens 840D control with Knoll coolant through spindle system, Knoll chip conveyor, Renishaw probe interface, mist extraction unit, chiller, handwheel & manuals Rohm Power Chuck & Rohm Collet System On Rotary Table. Axis Travel 'X'=1,000mm, 'Y'=820mm, 'Z'=400mm, 'C'=360°, 'B'=360°. Maximum Spindle Speed 6,000rpm. Spindle Taper SK50. 50 Position ATC. Dedpoz Hzwrofx Ap Dowc