Used Fps Werkzeugmaschinen Gmbh Fps 500M-Hydro for sale (71,012)

Year of construction: 2025, condition: new, Natural rubber Membrane Rubber sheet membrane In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth Ljdpfx Akei E Hp Tsfsaa smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Condition: new, Year of construction: 2026, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. Ledpfjff Huwjx Akfsaa • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Laodpfx Aeyabxyokfea Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Pusher Gas Carburizing Furnace (Double Line), Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Year of construction: 2026, condition: new, functionality: fully functional, The drum-type belt blast machine is specially designed for cleaning and derusting bulk materials. It operates reliably and is easy to use. Thanks to its robust construction and high-performance turbine, the system is ideal for daily use in production environments. Technical specifications: Capacity: 180 liters Turbine: 1 pc. Turbine 3.6.10 Turbine power: 11.0 kW Turbine control: frequency controlled Workpiece data: - Max. space diagonal: 270 mm - Max. workpiece weight: 25 kg Belt: perforation Ø 8 mm Abrasive: - Suitable for round abrasive media - Automatic refill silo: 100 liters - Integrated abrasive flow regulation Extraction & noise: - Sound pressure level without sound insulation ≤ 85 dB(A) - Filter unit can be positioned left or right Year of manufacture: approx. week 31/2026 Features: - Wear-resistant manganese lining in direct and indirect blasting zones - Turbine housing lined with tool steel - Turbine blades made of high-strength tool steel Lasdpfx Ajyxpvlskfsa - Turbine feed channel also made of tool steel - Abrasive collection chute beneath the machine for optimized media return Options: - Customized paint finish - Flexible filter positioning (left/right) - Loading solutions available upon request

Condition: good (used), Year of construction: 2001, functionality: fully functional, Manufacturer Fasti GmbH Model ERD 65 B Lsdpfx Aovzwrbekfsaa Connected load 0.9 kW

Condition: used, Features: 1 NH3-separator, 2 cooling compressors, 1 evaporative condensor, 1 control cabinet Laodpsvcqzrjfx Akfoa

Year of construction: 1982, condition: used, Cylindroconical 580 hl fermentation and storage tank - glycol cooling, 4 cooling zones (1 x cone, 3 x cylinder) - swivel cone - stainless steel - insulated - support skirt Additional title: Outdoor tanks Capacity: 580 hl Operating pressure: 2 bar Operating temperature: 20 °C Cooling area: 29 m2 1 x cone cooling; 3 x side-wall cooling Material: stainless steel Position: vertical Lajdpevcq A Aefx Akfoa Base construction: Short skirt support Features: Tank cooling; swivel conus; insulation; frame; outlet DN100; CIP connection; 2 x temperature sensor; sample valve

Year of construction: 2003, condition: used, Additional title: brew vessel from stainless steel Total volume: 260 hl Diameter approx.: 3 m Lajdpfx Aevcqz Eskfoa Diameter incl. insulation approx.: 3 m Frame height: approx.: 2 m Width: 3,4 m Material: stainless steel 1.4301 Base construction: on stainless steel pipe supports, ground pegged Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting

Year of construction: 1991, condition: used, 6 horizontal stainless steel tanks with dished bottoms, side cooling zone, manhole, sampling tap and central outlet. The purchase of a partial quantity is possible. Additional title: stainless steel tanks with temperature control Lajdpfx Akovcqulofoa Total capacity: 2429 hl Max. pressure 4 Tanks: 0 bar Max. pressure 2 Tanks: 5 bar Material: stainless steel Position: vertical Base construction: cylindrical tank with dished bottoms, placed on 4 square tube feet Features: 4 storage tanks (approx. 445 hl), 2 pressure tanks (approx. 320 hl), shell manhole, 1 shell cooling zone, insulated with steel metal cladding Periphery: own temperature control

Year of construction: 1983, condition: used, Yeast cultivation with dampable wort sterilization tank designed for an operating pressure of 2 bar and a capacity of 2.47 hl, a second heatable and coolable wort sterilization tank designed for an operating pressure of 2 bar with a capacity of 12.7 hl, and a yeast propagation tank with a capacity of 55 hl, permissible operating pressure of 2 bar and jacket cooling in the lower third (without cone). All tanks are equipped with an agitator. Also includes a CIP tank. The plant is controlled via a Steinecker control cabinet (time-controlled). The tanks are also available individually Lajdovcqt Ujpfx Akfoa Additional title: with switch cabinet and CIP tank Features: 2 tanks for wort sterilization with stirring unit (approx. 2,4 hl and approx. 12,7 hl), control cabinet, 1 cylindro-conical tank with stirrig unit, CIP system

Condition: used, Additional title: y. o. c.: mostly 2003 Finished wort: 150 hl Ljdpfevcqrwox Akfeaa Grist: 2500 kg Current: three-phase A.C. current Voltage: 400 V Frequency: 50 Hz Features: lauter tun, low pressure cooking wort copper-whirlpool system with external wort boiling system, additional whirlpool, trub collecting unit, hop dosage Periphery: lauter wort heater, vapor condenser

Year of construction: 1988, condition: used, Additional title: stainless steel tanks with temperature control Laodpfjvcqg Ijx Akfja Total capacity (gross): 904 hl Material: stainless steel Features: 3 fermenting tanks (1 x 554 hl, 2 x 175 hl), 1 yeast tank (37 hl) , own temperature control (Nerb)

Year of construction: 1995, condition: used, Stainless steel tank. - glycol cooling, 1 x side wall cooling jacket - stainless steel - insulated - short supporting skirt - deaeration and cleaning combination with safety valve Additional title: Outdoor tank for storing fluids Capacity: 744 hl Operating pressure: 0,9 bar Width: 12,55 m Laodpfx Aovcqdyskfja Height: 3,27 m Material: Stainless steel Position: vertical Base construction: short supporting skirt Features: Cooling: 1 x side wall cooling jacket; insulation; dearation and cleaning combination with safety valve; temperature measurement

Year of construction: 1985, condition: used, Pressurised tank cellar with 4 upright 324 hl stainless steel pressure tanks and with double-seat valve solution on the operating level. The tanks are cooled using ice water. Additional title: 4 pressure tanks Diameter/tank: 2550 mm Total height/tank: 7360 mm Cooling surface/tank: 25 m² Perm. working overpressure: 3 bar Systemic volume: 324 hl Length: 12 m Width: 4 m Height: 7,5 m Weight: 2585 kg Material: stainless steel AISI 304 Ljdpfevcqynex Akfoaa Features: Tank cleaning equipment with spray head, safety valve, pressure gauge, air valve combination; sampler, level indicator with valves, outlet valve Periphery: Inlet and outlet pipework via double-seat valves

Year of construction: 1979, condition: used, Additional title: wort cooler Capacity: 150 hl/h Lodpfovcqtzsx Akfeaa Pressure: 6 bar Max. temperature: 100 °C Length: 2550 mm Width: 900 mm Height: 2000 mm Weight: 1080 kg Material: stainless steel Base construction: on frame Features: 2-stage, connection widths: DN65 (wort, water) and DN80 (ice water) Periphery: wort aeration, mixing pump, booster pump (water),

Year of construction: 1988, condition: used, Cylindro-conical 965 hl fermentation and storage tank. - coolable, 1 x cone cooling jacket, 3 x side wall cooling jacket - swivel cone - stainless steel - insulated - short supporting skirt - deaeration and cleaning combination with safety valve - vacuum valve 12 tanks, also available individually or in partial quantities. Additional title: Outdoor tanks for storing fluids; years of manufacture 1988-1991 Ledpfxevcqnle Akfeaa Capacity: 96450 l Operating pressure: 2 bar Length: approx. 12400 mm Width: approx. 3950 mm Height: approx. 3950 mm Weight: 6220 kg Material: Stainless steel 1.4301 Position: vertical Base construction: short supporting skirt Features: 12 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement

Year of construction: 1979, condition: used, Centrifugal high-performance kieselguhr filter with buffer tank, kieselguhr dosing vessel and peristaltic pump. Additional title: Kieselguhr filter Capacity approx.: 110 hl/h Vessel volume: 1550 l Operating pressure: 9 bar Lodpevcqmbofx Akfoaa Operating temperature: 100 °C Operation / Control: Control cabinet with operating buttons Material: Stainless steel Features: Kieselguhr dosing vessel, 14,26hl; hose pump Periphery: buffer tank, vessel

Year of construction: 1975, condition: used, Filter system constructed with horizontally stacked filter elements. Once filtration is completed the kieselguhr is expelled from the vessel by centrifugal force. Lsdpfx Aevcqpcokfeaa Capacity: 140 hl/h Vessel volume: 26 hl Length: approx. 4000 mm Width: approx. 2000 mm Height: approx. 3500 mm Material: Stainless steel1.4541 (vessel) Base construction: on feet Features: Kieselguhr dosing vessel with dosing pump; pumps; fittings, measurement technology

Year of construction: 1979, condition: used, Combination Kieselguhr and Sheet filter. Stationary sheet filter with square filter elements in vertical row arrangement. Hydraulic filter layer compression. Control of hydraulics from built-in electrical panel. Additional title: Kieselguhr and sheet filters as a combination design; years of construction 1979 Capacity approx.: 380 hl/h Combination filter - filtration area approx. 76 - 108m2 KG; 18m2 Sheet with beer filtration Operating pressure: 8 bar Power: 6 kW Voltage: 220/380 V Frequency: 50 Hz Length: 10100 mm Width: 1320 mm Height: 1750 mm Formats: Square filter elements Lajdjvcqn Sspfx Akfsa Operation / Control: Built-in control panel Material: Stainless steel Position: Horizontal Base construction: Frame Features: Filter plates; Filter frames; collection tray with removal screw; hydraulik filter plate compression; hose pump Layer patterns: Vertical row arrangement

Year of construction: 2001, condition: used, The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles Minimal water consumption Quick replacement of filter elements Controlled backwash Minimal beer loss High biological safety Constant availability With this filter system only preclarified products may be filtered, which have normally filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Lasdpsvcqx Dofx Akfea Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 ° C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Length: 1,40 m Width: 1,20 m Height: 1,85 m Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Year of construction: 1975, condition: used, Stationary sheet filter with quadratic filter elements in a row. Additional title: sterilisation filter Capacity: 140 hl/h Number of plates: 119 plates Length: 7500 mm Width: 1600 mm Height: 2000 mm Lsdpfxsvcqzls Akfjaa Formats: Quadratic filter elements - 100 cm x 100 cm Layer patterns: Vertikale Reihenanordnung der Filterelemente

Year of construction: 1995, condition: used, This filter system may only be used to filter preclarified products that have normal filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 °C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet Laodpfxjvcqv No Akfsa

Condition: used, Year of construction: 1991, consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station -Control cabinet with operating panel Additional title: juice heating plant for pasteurization Capacity: 100 hl/h Perm. working overpressure: 16 bar test pressure 20,8 bar Wärmeaustauschfläche: 21 m2 Length: 5,6 m Width: 2 m Height: 2,4 m Operation / Control: Control cabinet with operating buttons Material: Stainless steel Laedevcqy Uepfx Akfja Base construction: Frame Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings

Condition: used, Year of construction: 2006, Semi-automatic 5l Party Keg filling line, including 6-headed filler, capper, transport conveyors, washer and turner. Additional title: semi-automatic Capacity: 240 cph Power: 0.3 kW Current: 1,85 A Ljdsvcqpiepfx Akfoaa Voltage: 400 V Frequency: 50 Hz Compressed air: 3.2 cbm/h at 6 bar Length: 5000 mm Width: 3000 mm Height: 2300 mm Operation / Control: SPS S7-200 Features: Single-point, semi-automatic canner Transport unit washer and turner

Condition: used, Year of construction: 1986, Fermentation cellar with 4 coolable stainless steel tanks. Tank 1-3: C. Gresser, 1986, gross volume 204.60 hl. Tanks standing on 4 legs, each with 2 frame cooling zones, dished bottoms and central outlet. Equipment in each case: safety valve, cleaning line, CIP spray head, sampling tap, manhole in the frame and sight glass in the tank dome. Tank 4: C. Gresser, 1986, gross volume 115.69 hl. Tank standing on 4 legs with frame cooling, dished bottom and outlet pipe. Equipment: Cleaning line, CIP spray head, sampling tap, manhole in the frame. Additional title: coolable stainless steel tanks Lsdjvcq Dtspfx Akfoaa 3 tanks each: 205 hl 1 tank each: 116 hl Material: stainless steel Position: vertical on 4 feet Features: Cooling jackets, cleaning lines, CIP spray heads, discharge lines, safety valves, sampling taps, manholes, sight glasses