Used Frequency Converter 3 Kw for sale (82,035)

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Perske -Type: 35DW16/6 -Type: DA16/2 -Input: 380 V 50 Hz -Output: 133 V 200 Hz -Power: 35 KVA -Dimensions: 1000/520/H500 mm -Weight: 450 kg Itedpjdcmvrefx Alxjk

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 4 kW -Output: 380 V 100 Hz -Power output: 8 kVA -for edgebanders, edgebanding machines Iodeb A Hghopfx Alxotk -Weight: 120 kg

Condition: used, type of input current: AC, protection type (IP code): IP22, power: 132 kW (179.47 HP), Equipment: type plate available, Exact type designation: ABB ACS607-0170-3 Itsdpfxjrakqmj Alxsk Output power and output current: 132kW | 260A ° With TEST SEAL! ° Easy to use thanks to the integrated control panel ° Original operating instructions for commissioning included Only 1 more in stock! Item has been reset to factory settings and is therefore in the original delivery condition from the manufacturer. Please refer to the original product images for the optical condition. Functional and ready to use.

Condition: good (used), KSB pump Etaline GN 050-160 / 074 G10 Inline pumps and three-phase standard motor with motor-mounted frequency converter for stepless speed adjustment. Applications: heating systems air conditioning Water systems water supply industrial circulation systems conveyed Liquids that do not attack the pump materials chemically and mechanically. operating data Q 17,50 m3 / h H 5.8 m Further data of this pump can be found in the data sheet Itodsd Sqkzopfx Alxjk 1) The sum of inlet pressure and delivery head in the zero point of quantity may be said to Do not exceed the value execution Block pump in inline design, with variable-speed standard motor, pump and motor shaft are rigidly connected. camp Deep groove ball bearing grease lubricated. shaft seal uncooled and maintenance-free mechanical seal according to EN 12 756 Pump series: Etaline Material combination: gray cast iron Standard engine and stub shaft Size designation: 65 Nominal diameter suction / discharge connection 160 Further technical data can be found on the data sheet. Item condition: used Scope of supply: 1 x KSB pump Etaline GN 050-160 / 074 G10

Condition: new, Frequency converter VLT Automation Drive Manufacturer: Danfoss Typ: FC-302P3K0T5E20H1B Itodpfxjhqh Hps Alxjk Input: 3x380-500 V, 50/60HZ, 6.5/5.7A Output: 0-590HZ, 7.2/6.3A

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive Iodpfxecblxms Alxstk -Input: 380 V 50 Hz -Output: 380 V 100 Hz -Power: 18 KVA -Dimensions: 1160/480/H540 mm -Weight: 290 kg

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 50 Hz -Output: 110/165 V 200/300 Hz Ijdpob R Aczefx Alxstk -Power: 8.3/12.5 KVA -Dimensions: 750/350/H320 mm -Weight: 150 kg

Condition: refurbished (used), Year of construction: 2012, completely overhauled machine Isdpfxozhvzqj Alxotk Rotor length 830 mm Rotor diameter 360 mm Hopper opening approx. 830 x 1000 mm, capacity approx. 1 m³ Cutting tools: 40 pieces Motor: 37 kW incl. turbo coupling Extraction nozzle: 200 mm Equipment: completely overhauled machine - new gearbox - Ecorings - 6 months warranty - all important components have been inspected, and wear parts have been replaced. - Rotor has been completely refurbished - Bearings, blades, etc. are new - Motor was replaced in 2022 - newly painted Further technical data available upon request.

Condition: used, Year of construction: 2001, functionality: fully functional, operating hours: 43,000 h, For sale: TRUMPF L3030 laser cutting machine YEAR 2001 LIFTMASTER+ with loading and unloading shuttles 3000 WATT FORMAT 3000X1500 MAGNETIC TURBINE SIEMENS control Itjdpfx Aozq R D Solxok

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive Itsdjd Nlf Ropfx Alxek -Manufacturer: Flender -Type: 2 GR200/230 -Input: 380 V 50 Hz -Output: 165 V 300 Hz -Power: 26 KVA -Dimensions: 1300/560/H380 mm -Weight: 390 kg

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, servo drive, drive controller Ijdpfjnah Dnjx Alxstk -Manufacturer: KEB, frequency converter Drive Controller Combivert -Type: 12.56.200-A349 92280163/053049 -Power: 5.5 kVA -Dimension: 355/245/H220 mm -Weight: 6.7 kg

Year of construction: 2026, condition: used, New: Yes Empty weight: 400 kg Dimensions of cargo space: 150 x 130 x 107 cm CE mark: yes Please contact Team DPX for more information AC400V-200kW Automatic Load Bank Rated Voltage: 3P4W AC400V 50/60 Hz Rated Voltage & Frequency: 400VAC; 3 phase 4 wire, 50/60 Hz Power Supply: 3P5W AC400V 50 Hz Rated Power: 200 kW at 400V Duty Cycle: Continuois Cooling Type: Forced Air Cooling (Horizontal air intake and exhaust cooling, there will be louver at air outlet and inlet.) Itedpfx Ajznr Dbolxjk Load Steps: Resistive Load: 9 steps, 1, 2, 2, 5, 10, 10, 20, 50, 100 kW Wire Connection: - Load bank input— busbar (star coupling “Y”) - Control power input—terminal block Communication Interface: RS232/RS485

Condition: good (used), functionality: fully functional, Year of construction: 2022, operating hours: 6,000 h, control type: CNC control, degree of automation: semi-automatic, controller manufacturer: Siemens, laser type: fiber laser, laser source manufacturer: Bodor, laser hours: 2,000 h, laser power: 12,000 W, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, table length: 3,000 mm, table width: 1,500 mm, power: 12 kW (16.32 HP), input voltage: 380 V, input current: 130 A, type of input current: three-phase, type of cooling: water, total length: 7,000 mm, total width: 2,500 mm, total height: 2,500 mm, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, For sale is a Bodor P3 12kW fiber laser cutting machine in excellent condition. The machine is being sold due to a recent upgrade. The system features a laser power of 12,000 watts and a table size of 3000 × 1500 mm. Year of manufacture is 09/2022. This machine is ideally suited for precise and rapid sheet metal processing in industrial applications. The Bodor P-Series stands out for its high dynamics and speed, with traverse speeds of up to 200 m/min and acceleration up to 1.8G, enabling efficient production workflows. It also offers high positioning accuracy of around ±0.05 mm. Iedeyr Ddcopfx Alxetk Typical cutting capacities (depending on material and parameters) are: Mild steel up to approx. 25–35 mm Stainless steel up to approx. 15–25 mm Aluminum up to approx. 12–15 mm Key technical data (extract): • Laser power: 12 kW fiber laser • Working area / table size: 3000 × 1500 mm • Max. traverse speed: up to 200 m/min • Positioning accuracy: ±0.05 mm • Max. table load: approx. 1,200–1,450 kg • CNC control with touchscreen and nesting software The machine can be inspected and demonstrated by appointment. For questions or if you are interested, please feel free to contact us.

Condition: good (used), functionality: fully functional, MAPELLI 3-bag sawdust extractor 11 kW Specification: • Condition – used, serviced • Manufacturer – MAPELLI • Turbine motor power – 11 kW • Turbine diameter – 70 cm Iedew U D Itspfx Alxotk • Bag shaking mechanism with control cabinet • Turbine inlet – 420 mm diameter • Filter area: 18 filter bags 25x160 cm • Airtight body with warm air return • Pipes and chimney from the photos included • Collection bag diameter – 3 x 600 mm • Overall dimensions – 395/290 x 105 x 380 cm (length/length without turbine x width x height) • Transport height – 280 cm + skids Additional information: • Good original technical condition • Photos reflect the actual condition of the item for sale • Possibility to power up and test the machine on site

Year of construction: 1995, condition: used, functionality: fully functional, 3 rotor blades Itsdpfjv Nnr Iox Alxjk 2 stator blades Blade inlet 220 x 180 mm Power 3 kW

Condition: excellent (used), KEB inverter EMC filter 180A, 0 ..... 528V Isdod A Ndfopfx Alxetk UL. 480V 150A Ambient 3K3, Mat. 23E4T60-1001 line International shipping on request!

Condition: excellent (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Typical current: 40 A -DC circuit nominal voltage: AC 700 V -Dimensions: 65/410/H260 mm -Weight: 7 kg Itedpob A Hfwsfx Alxek

Condition: like new (used), Year of construction: 2017, functionality: fully functional, 2 recirculating air chamber furnaces, fast heating times, short process times, electric, 12-month warranty, immediately available -Temperature 200°C, increase to 250°C possible upon request -Charging car, 5 units available, modification possible upon request -Homogeneous temperature distribution of +/- 10 °C -Internal dimensions W x D x H: 3750 x 1400 x 2300 mm -External dimensions W x D x H: 4850 x 1705 x 3880 mm -Usable volume 11.6 m³ Itodsy Avqwopfx Alxjk -Control system S!MPAC with touch panel -Program execution with good sensor as cascade control -Temperature limiter -Signal tower -Directly accessible, with grid rails -Exhaust air volume flow 140 m³/min -Electromagnetic door lock -Rated power 180 KW -Connection 241 KW!!! -Weight approx. 3500 kg -Documentation, CE declaration of conformity We would be happy to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Furnace, Oven, Ovens, Drying oven, Industrial oven, Drying cabinet, Heat oven, Heat cabinet, Recirculating air oven, Chamber oven, Heating oven, Chamber recirculating air oven, Tempering oven, Temperature oven, Recirculating air chamber oven, Hardening oven, Vötsch oven, Weisstechnik, Fusing oven, Fusing, Postcuring, Post-curing of liquid crystal windows, CFRP support structures, CFRP support structure, Curing oven, Oven for glass, Glass tempering oven, Glass fusing oven, Glass hardening oven, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Year of construction: 2023, condition: new, Selling a WLO 25 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 25.00 kW maximum heat output: 30.00 kW / approx. 300 m2 in set: forcing axial fan speed: 1400 rpm and capacity: 3110 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 230 kg Gross weight: 240 kg Itsdpeixupmjfx Alxek Furnace lining: 15 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 485mm x Overall Depth: 900mm x Overall Height: 1310mm Oven dimensions: Width: 390mm x Depth: 460mm x Height: 540mm Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Diameter exhaust outlet: Ø 130mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 350mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.58A Speed: 1400 rpm Air flow: 3110 m3 / h Safety: CE mark + protective net

Year of construction: 2023, condition: new, WLO 4 35 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 30.00 kW maximum heat output: 35.00 kW / approx. 300 m2 in set: force axial fan speed: 1350 rpm and capacity: 3500 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 290 kg Gross weight: 310 kg Furnace lining: 28 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 580mm x Overall Depth: 950mm x Overall Height: 1310mm Oven dimensions: Width: 480mm x Depth: 580mm x Height: 560mm Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 150mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 400mm Power supply: 230V / 50Hz Itodpfxjixupuo Alxek Engine: 4P Current consumption: 0.82A Speed: 1350 rpm Air flow: 3500 m3 / h Safety: CE mark + protective net

Condition: excellent (used), Pressure centrifugal pump Vertical centrifugal pump Grundfos CR 90-3 A-F-A-E-EUBE more piece Vertical, multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are in cast iron - all other wetted parts are in stainless steel (EN 1.4301) Rated flow 90 m³/h Rated head 65.5 m Max pressure at stated temp 16 bar / 120 °C Type of connection DIN Size of inlet connection DN 100 Pumped liquid Water Liquid temperature range 0 .. 120 °C Selected liquid temperature 20 °C Density 998.2 kg/m³ Electrical data Motor type SIEMENS Rated power - P2 22 kW Iedpfx Ajhy Nx Eelxstk 2940 rpm Mains frequency 50 Hz Rated voltage 3 x 380-415D/660-690Y V Rated current 41,5-39,5/24,0-23,5 A Cos phi - power factor 0.86 Rated speed 2945 rpm Number of poles 2 Enclosure class (IEC 34-5) IP55

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Fiber Laser cutting machine FLV-3015-C2 20kW Specifications - Maximum sheet size: 3000 x 1500 mm - X/Y positioning accuracy: ±0.05 mm/m - X/Y positioning repeatability: ±0.03 mm - Maximum travel speed: 120000 mm/min - Maximum acceleration: 1.5 G - Motor power output: 20.0 kW - Energy consumption: 73.0 kW - Source brand: Raycus or MAX Photonics to choose from - Input voltage: ~3×400 V 50 Hz - Ingress protection rating: IP54 Cutting thickness - Carbon steel: recommended thickness 35.0 mm, maximum thickness 35.0 mm - Stainless steel: recommended thickness 25.0 mm, maximum thickness 25.0 mm - Aluminum: recommended thickness 18.0 mm, maximum thickness 18.0 mm - Brass: recommended thickness 18.0 mm, maximum thickness 18.0 mm Structure The machine is very stable due to its welded structure on massive legs. Fuji Japanese servo drives with robust bevel rack and pinion drive ensure high speed and exceptional accuracy of the cutting head. The ABL system automatically replenishes the grease in the rails. RayTools cutting head with auto-focus. Control panel The control of the fiber laser occurs is carried out via the control panel with keyboard and mouse. The computer includes the Windows system and CypCut software, which comes with functions such as: Itodpfxjtixt He Alxok - part programming, - file import and export, - adjustment of power output and cutting speed. Installed software has lifetime licenses Wireless remote The control of the laser head is carried out by a wireless remote control. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, each purchased machine includes a Specialist Assistance Package with dedicated hours of expert guidance. Within the service, our technicians may: - Prepare or redesign CAD drawings, - Advise on material and gas selection, - Assist in the selection of operating parameters for different materials. The remaining time can be checked in the Otinus Customer Panel. Free drawing package Each Otinus laser cutter includes a comprehensive set of ready-to-use CAD drawings. The designs included are ready-made as they can be immediately cut in any format. Our technician will show you how to do that during training. The drawings will be useful to anyone who wants to make various types of decorative items. Technical Consultation Our specialists help select the right machine and accessories based on technical drawings of the parts you plan to produce. Price-included 2-day training with machine installation - 1st day (up to 8 hours) – machine commissioning and controller usage training - 2nd day (up to 8 hours) – work under the guidance of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 50 Hz Ijdpfx Alsb Rynxsxetk -Output: 300 V 165 Hz -Power output: 25 kVA -Dimensions: 800/400/H320 mm -Weight: 200 kg

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Fiber Laser Cutter FLV-3015-C2 1.5kW Specifications - Maximum sheet size: 3000 x 1500 mm - X/Y positioning accuracy: ±0.05 mm/m - X/Y positioning repeatability: ±0.03 mm - Maximum travel speed: 120000 mm/min - Maximum acceleration: 1.5 G - Motor power output: 3.0 kW - Source brand: Raycus or MAX Photonics to choose from - Input voltage: ~3×400 V 50 Hz - Ingress protection rating: IP54 Cutting thickness - Carbon steel: recommended thickness 12.0 mm, maximum thickness 16.0 mm - Stainless steel: recommended thickness 5.0 mm, maximum thickness 6.0 mm - Aluminum: recommended thickness 3.0 mm, maximum thickness 4.0 mm - Brass: recommended thickness 2.0 mm, maximum thickness 3.0 mm Structure The machine is very stable due to its welded structure on massive legs. Fuji Japanese servo drives with robust bevel rack and pinion drive ensure high speed and exceptional accuracy of the cutting head. The ABL system automatically replenishes the grease in the rails. User-friendliness The fiber laser cutter is fully adapted to the needs of the user, ensuring maximum comfort during its operation. The heavy plates are made easier to handle with ball transfer units embedded in the surface, allowing the plates to roll smoothly during loading. Collecting small parts is much easier thanks to the waste collection trolleys, which can be pulled out using a convenient handle. Control panel The control of the fiber laser occurs is carried out via the control panel with keyboard and mouse. The computer includes the Windows system and CypCut software, which comes with functions such as: - part programming, - file import and export, - adjustment of power output and cutting speed. Installed software has lifetime licenses Wireless remote The control of the laser head is carried out by a wireless remote control. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, each purchased machine includes a Specialist Assistance Package with dedicated hours of expert guidance. Within the service, our technicians may: - Prepare or redesign CAD drawings, - Advise on material and gas selection, - Assist in the selection of operating parameters for different materials. The remaining time can be checked in the Otinus Customer Panel. Itodpfxetiyzts Alxok Each Otinus laser cutter includes a comprehensive set of ready-to-use CAD drawings. The designs included are ready-made as they can be immediately cut in any format. Our technician will show you how to do that during training. Price-included 2-day training with machine installation - 1st day (up to 8 hours) – machine commissioning and controller usage training - 2nd day (up to 8 hours) – work under the guidance of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: used, Year of construction: 2002, SEW Movitrac Frequenzumrichter 31C011-503-4-00 RA1284 Hersteller: SEW Eurodrive Typ: Movitrac 31C011-503-4-00 Zustand: gebraucht/ geprüft/ voll funktionsfähig Isdpfxok Abqqo Alxjtk Version: 011-503-4-00 Preis: zzgl. MwSt. ab Zentrallager Dr. Sonntag GmbH & Co. KG 97076 Würzburg