Used Holz-Her Sector 1260 Automatic for sale (28,316)

Year of construction: 2020, condition: new, An automatic car wash is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying, it has been designed so that as little liquid as possible migrates to subsequent processes after the process, saving money and improving the quality of washing. This is very important, because the apparent savings in systems made without the use of these solutions may generate much higher costs in the future related to chemicals and waste disposal, which will be simply more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development works allowed us to develop a car wash with the function of drying details (Option) with hot air blown by a set of fans after the washing process. The car wash is equipped with an advanced system of creating own macro programs, which can consist of 10 steps each, depending on the number of tanks, the processes can be repeated, their order can be changed, etc. Each of the tanks has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out e.g. between processes or at the end of the cycle. • Controls installed on a swivel arm for better access • PLC microprocessor control Psdpfxjfz Nblo Alhsgn • 7 "touch control panel • A very large number of nozzles compared to other solutions • (Option) Possibility of drying details after washing • Ability to create your own advanced programs • Advanced system of dampers made of acid-proof steel sheets, double secured with limit switches • Control system for tight closing and full opening of the flaps • To minimize fluid mixing, separate lines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, the fluids cannot be mixed • Fully automatic operation

Year of construction: 2020, condition: new, An automatic car wash is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying, it has been designed so that as little liquid as possible migrates to subsequent processes after the process, saving money and improving the quality of washing. This is very important, because the apparent savings in systems made without the use of these solutions may generate much higher costs in the future related to chemicals and waste disposal, which will be simply more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development works allowed us to develop a car wash with the function of drying details (Option) with hot air blown by a set of fans after the washing process. The car wash is equipped with an advanced system of creating own macro programs, which can consist of 10 steps each, depending on the number of tanks, the processes can be repeated, their order can be changed, etc. Each of the tanks has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out e.g. between processes or at the end of the cycle. • Controls installed on a swivel arm for better access Pjdpfxofy T Rco Alhjgn • PLC microprocessor control • 7 "touch control panel • A very large number of nozzles compared to other solutions • (Option) Possibility of drying details after washing • Ability to create your own advanced programs • Advanced system of dampers made of acid-proof steel sheets, double secured with limit switches • Control system for tight closing and full opening of the flaps • To minimize fluid mixing, separate lines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, the fluids cannot be mixed • Fully automatic operation

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Showroom machine from the manufacturer! Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Calendar collating machine Type - MKW RAPID UT - System Belt conveyor table 20 - Number of stations B3 - Format 35 x 50 cm / 13.78" x 19.68" GS - High pile up to 70 cm 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 20 stations Belt-Conveyor-Table - Sheet sizes 10 x 14 cm up to 35 x 50 cm - Sheet sizes 3.94" x 5.51" up to 13.78" x 19.68" - High-Pile version with max. 70 cm / 27.55" stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment via electrical clutches - Foldable transport fingers - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Clocked blown air for accurate sheet layering - Electronically adjustable sheet layering - Electronic machine control by Industry-PC system - High quality 15'' color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Delivery control system for criss-cross with adjustable set interval - Transport table lighting with LED-Lamps Pgodpfx Alsy U Hdlohsn - Jam control along the transport table - Active safety: Transparent safety hoods made of unbreakable PC - Ejector unit inclusive additional station at the delivery AW 3 incl. (for ejection of faulty sets) - Raising unit for delivery rollers AHB incl. (for different paper formats in one set and signatures) - Delivery Jogger-system integrated DSS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - LED signal lights to visualise the information of each station SOFU-HIVIS incl. (enables simple status detection) Alternative to Jogger: 1 High-Pile delivery Type MKW RAPID HA 350-UT / PN + T-BELT - Automatic high-pile delivery up to 30 cm piling of sets - Format up to 35 x 50 cm - Staggered delivery of sets - Pneumatic drive unit for staggering of sets - Automatic delivery on to buffer belt - Buffer belt lenght approx 2,00 m - Counter function for pile height - Text display for operation and monitoring Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Subject to prior sales Detailed offer on request

Year of construction: 2022, condition: used, Model: TTF-520AF Forming Area: 520mm x 400 mm Forming Depth (Max.): 110mm Sheet thickness: 0.2-1.6mm Forming Speed (Max.): 30times/min Air pressure: 0.6-0.8mpa Air consumption: 3.0 m³/min Water consumption: 0.7 m³/h Sheet width (Max.): 550mm Suitable Sheet: PP, PS, HIPS, PET, PVC, PLA etc. Power supply: AC 380V, 50Hz, Three-phase, Four-wire Psdpfx Aeyvh Tqjlhegn Used power: 55Kw Rated power: 136Kw Heating power: 75Kw Procedure: Forming-punching-cutting-stacking Dimension: L10800*W4650*H2670mm Weight: About 11.0T

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, Thanks to its compact dimensions and quick mould change, it is the ideal solution for small delis and supermarkets. The machine can be fitted with the patented INFINITY modular J Pack mould or with customised moulds. Optionally also available with gas flushing. Pgjdpfx Aol Eylaslhen Features: - Mould change - Customisable mould - Automatic film unwinding - Acoustic end-of-cycle buzzer - Partial and total cycle counter Technical Specifications: - Dimensions: 295 mm x 450 mm x 550 mm - Weight: 25 kg - Max. tray size: 260 mm x 195 mm x 155 mm - Max. reel width and diameter: L= 210 / Ø 200 mm - Feeding: Electric - Tray loading and handling: Manual + Electric - Mould: Infinity / Fixed, no die-cut - Cycles per minute: 3 - 8 - Custom digital welding programmes: 9 - Power supply: 220 V / 750 W

Condition: good (used), The machine consists of two units and offers the following functions: 1. Drilling dowel holes 2. Dowel milling 3. Glue injection 4. Dowel insertion Pjdpfx Ajtpqafjlhegn Completely cleaned glue system; Positioning laser; We can send you a video demonstrating the machine in operation. Process time is only approx. 3 sec/cycle You can call or write to us. We speak and write in German and Russian. You may also send messages in English. 5.3.4

Condition: new, functionality: fully functional, Basket Washing Machine MRS - WASH 1200 Application: The device is designed for washing components of various sizes and weights. The washer is equipped with a mechanically driven rotary basket powered by a motor and spray nozzles. Operating Description: After switching on the main power, the bath heating process begins. Once the set temperature is reached, the washing cycle can be started. The primary washing phase is the first step, and its duration can be continuously adjusted using the timer located in the control box. When the set time elapses, the bath will end automatically. STANDARD EQUIPMENT OF THE WASHER: * Safety cover switch that disconnects during opening in the washing process * Liquid level sensor in the tank preventing dry operation * Temperature sensor * Single spray arm * Mechanically rotated basket * Double filtration system * Coarse mesh filter for insoluble contaminants (1mm mesh) * Drain valve Technical Data: Basket diameter: 1200mm Working height: 500mm Basket capacity: 300kg Working time programmability: 0-99 min Washing temperature: 60°C Heater power: 12kW Tank capacity: 400l Spray performance: 200l/min Spray working pressure: 4.5bar Overall width: 1750mm Overall depth: 1750mm Overall height (closed/open): 1250/2400 mm Pgedpsxnlpdefx Alhon Power supply: 3~400V OUR OFFER INCLUDES OTHER MODELS OF AUTOMATIC BASKET WASHERS FROM THE MRS WASH SERIES WITH SIZES 800, 1000, 1200, 1500, AND EVEN 1500 XL. PLEASE CONTACT US FOR OFFERS ON OTHER MODELS.

Condition: new, functionality: fully functional, warranty duration: 12 months, total width: 1,750 mm, total length: 1,750 mm, total height: 1,700 mm, type of input current: three-phase, The HYDRO WASH 1200 2-in-1 automatic basket washer is a multifunctional device, enabling fully automatic cleaning of parts in a motor-driven rotary basket. For parts with more complex shapes, high-pressure washing at 140 bar is available. Thanks to the combination of these processes, this machine is versatile and can be used in any workshop. It is particularly suited for companies specializing in turbocharger, steering gearbox, and transmission refurbishing, significantly streamlining workflow. To ensure user safety and stable washing parameters, an electronic control panel and a range of integrated sensors are employed. Operating principle: Before the first use, fill the tank with washing fluid. The recommended fluid is a solution of MRS Cleaner Strong concentrate and water in the specified ratio. The Hydro Wash offers both manual and automatic washing modes. a) To activate automatic washing, prepare the device (fill with water and concentrate), close the metal glove cover, close the washer lid by simultaneously pressing two buttons (located at the front and rear of the device), and press the start button. Pgsdpfx Alsxm Ulljhon *Basket rotation possible when the lid is open by pressing the right pedal button or simultaneously pressing the two buttons at the front and rear. The condition is that the metal glove cover must be closed.* b) To activate manual washing, close the washer lid by pressing the two buttons (front and rear) simultaneously. Open the metal glove cover and press the left pedal button. STANDARD EQUIPMENT: - Lid interlock sensor for safety when opened during washing - Liquid level sensor to protect against dry operation - Liquid temperature sensor - Adjustable spray arms with nozzles made from stainless steel by Spraying System - Mechanically driven rotary basket - High-pressure pump (140 bar) - Compressed air gun - Pressure regulator with water separator - Coarse mesh filter for insoluble contaminants (0.8 mm mesh size) - Fine filter for contaminants - Adjustable feet - Drain valve - Pneumatic cylinders Technical Data: - Basket diameter: 1200mm - Working height: 500mm - Basket load capacity: 300kg - Programmable cycle time: 0–99 min - Washing temperature: 60℃ - Heater power: 12kW - Tank capacity: 400l - Spray rate: 200l/min - Working spray pressure: 4.5–6 bar - Manual washing pressure: 140 bar - Overall width: 1750mm - Overall depth: 1750mm - Overall height: 1700mm (2450mm with lid open) - Power supply: 3~400V Optional equipment: - Belt oil skimmer - Low-pressure lance kit - Reinforced pump OTHER DIMENSIONS OF HYDRO WASH 2-IN-1 WASHERS AVAILABLE! MODELS 800 AND 1000 ALSO IN STOCK. CONTACT US FOR DETAILS ON OTHER MODELS.

Condition: ready for operation (used), Year of construction: 2000, Weighing range min.: 175g, temperature range: 10-40°C, voltage: 230V, frequency: 50Hz, with EC declaration of conformity. An on-site inspection is possible, not under power. Pedpfxjx Aum Us Alhegn

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00041790, The full description can be found in the two attached documents. The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. Pjdpfx Alsykq T Ushsgn In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: - Production progress - Production times - Weighing statuses - Preparation times - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00040812, The full description can be found in the two attached documents. The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. Podsykq D Hopfx Alhegn The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: - Production progress - Production times - Weighing statuses - Preparation times - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Condition: new, Year of construction: 2025, Automatic weighing unit for granulate like products (chemicals, food, sugar, coffe, detergents, etc.) into bottles, cans or similar. Including hopper, vibrating feeder, weighing unit, housing to minimize dust, rack and conveyor. - Specifications: stainless steel version (SS304); 2 head weigher each with weighing range of 10-2000g; Accuracy: Pgjdjv Nk Nispfx Alhon

Condition: used, functionality: fully functional, Mecapack has developed the O² 2500 tray sealer to provide efficient packaging solutions, particularly for medium to high output production lines. With three available versions, this machine perfectly adapts to the specific requirements of industrial operations. Notably, it features an easily interchangeable built-in tooling system, allowing operators to switch between different packaging processes effortlessly. Additionally, the O² 2500 stands out for its exceptional ergonomics, making it user-friendly, while its design enables thorough cleaning of the entire machine. The FLEX configuration is equipped with an integrated tooling storage rack, ensuring rapid and smooth changes for various tray sizes. Its tooling compatibility with the O² 1500 model further enhances versatility, making this machine suitable for a wide range of production environments. Pgsdpfx Alju Ia Uvshon The pneumatic sealing station, equipped with a crank mechanism and mechanical locking, guarantees reliable and precise seals. Integrating the O² 2500 into your production line means benefitting from a robust, ergonomic, and adaptable machine. Moreover, this solution improves overall efficiency while maintaining high-quality standards for food packaging. Benefits: - Fully automatic tray sealer - Superior ergonomics and full cleanability - FLEX configuration with integrated tooling storage - O² 1500 tooling compatibility - Highly reliable and precise pneumatic sealing Technical specifications: Manufacturer: Mecapack Model: O² 2500 MF Voltage: 400 V, 3-phase + N + PE Power: 10 kW Cycle rate: 14 cycles/min (cpm) Energy supply: Electricity: 6 to 25 kW; Air: 15 m³ at 6 bar; Water: 100 L/h (can be removed with integrated chiller option) Tray capacity: Depending on format and number of lanes

Year of construction: 2004, operating hours: 37,800 h, condition: like new (used), functionality: fully functional, Top maintained high premium die cutter for fast setup and TOP quality jobs Technical data: Paper up to 70 gsm Cardboard up to 1000 gsm Corrugated board up to 2 mm Max. format: 1060 x 760 mm Min. format: 400 x 350 mm Press force: 260 t Speed up to 9,000 sheets/hour Pedpoyaq S Ajfx Alhegn Equipment: Stripping station Optical register control Automatic pile alignment Ultrasonic double sheet control Centerline Microplate Plate 4 mm 2 closed frames Non-stop delivery Alignment table Height raised by 220 mm

Condition: used, machine/vehicle number: 008018, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Pgodpfx Ajwv Dfcslhjn Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 101-335, functionality: fully functional, Machine available starting in early October 2026. The machine can be inspected and demonstrated at the customer's facility. Workpiece thickness: 8 - 60 mm Workpiece length: min. 160 mm Feed rate: 10 m/min - Extendable workpiece support - Motor-driven pressure bridge, PLC-controlled - 1888 Control panel PPC 231 U+E - 1801 Edge milling unit incl. 2 edge milling cutters 70x64x30 - 1903 Edge feeder, fully automatic - GJ 301 Glue-Jet adhesive application system incl. sensing nozzle and cartridge magazine for EVA & PUR adhesive cartridges - 1912-3 Pressing unit, pneumatic - 1918 Cutting unit with pneumatic pivoting 0 - 12° via PLC Pgedpfxjzg Upwj Alhen - 1827 Milling unit, motor-driven, 4 pneumatic cylinders, controlled via PLC - 1832 Profile milling unit (Auriga SPS) - 1929 Radius scraping unit, motor-driven, 2 SPS - 1964 Surface scraping unit - 1856 Release agent sprayed at the front, cleaning agent sprayed at the rear - 1940 Deburring unit Overall length: 4930 mm Weight: approx. 1429 kg

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Storage location: Nattheim Psdpfx Alevvi Nbohjgn

Condition: used, machine/vehicle number: 008494, Position 1: Single Edgebanders HOLZHER-LUMINA + MASTER 5510 Position 2: Panel Return Systems HOLZHER-LUMINA + MASTER 5510 Pedpszbxznjfx Alhogn

Condition: used, first registration: 03/2002, next inspection (TÜV): 03/2027, Equipment: ABS, Export only Sale only abroad SPR 324 Kotschenreuther Pedpfx Aey Dmq Dslhogn 3 axles

Condition: used, maximum load weight: 16,250 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 05/2016, Year of construction: 2016, Internal vehicle number: G300388 Available immediately at our yard in Kaufungen More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Pjdpfoyxiyqsx Alhogn Unladen weight: 3,750 kg Subject to errors and omissions. We will gladly accept your used vehicle as a trade-in. Financing is possible directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), Automatic Pocket Machine . We have more models available .All machines have 6 months warranty .Worldwide delivery . Over 25 years of experience . Yamatex Pgjdpfx Asy H Sh Tslhsn

Condition: used, Year of construction: 2020, operating hours: 12,057 h, Liebherr LH 50 M material handler, year of manufacture: 2020, operating hours: 12,057 h, incl. timber grab, front and rear dozer blade, heating, air conditioning, all-wheel steering, steering wheel & joystick steering, central lubrication for upper and lower carriage, engine: Liebherr [170kW/230HP], weight: approx. 40,300 kg, good condition, immediately available for operation. Upon request, we can provide a leasing or financing offer. Mr. Mihm (Tel.) will be happy to assist you. For further information, please visit our homepage. Subject to prior sale and errors. Pjdpfsyfrpyox Alhogn ZSA = Further information = Drive: Wheel Please contact Tobias Ebert for more information.

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Pjdpezgc Uuofx Alhegn Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: new, New motor from renowned German manufacturer Baumüller Nürnberg. The motor is unused, warehouse stock (old stock). No signs of operation. Technical data – from nameplate: • Manufacturer: Baumüller Nürnberg GmbH • Type: GNA 132 MV • Supply voltage: 400 V • Current: 39 A • Power: 12 kW • Rotational speed: 1260–4000 rpm • Excitation voltage: 310–365 V • Excitation current: 0.17–0.38 A • Insulation class: F • Protection class: IP23 • Standard: VDE 0530 • Serial number: 88104349 Pgedpfx Aljyga Ugohen The motor is intended for automation, CNC, special machine applications, and as a spare part for existing Baumüller drive systems. Price quoted per unit.

Condition: good (used), Morgana FSN Automatic Numbering Machine Functions: Numbering, perforating, creasing, cutting, and scoring. Technical specifications: Speed: 9000 sheets/h Up to 5 perforating knives Up to 8 numbering heads Adjustable pressure Pneumatic sheet feed (identical to a folding machine) Continuous bottom feed with non-stop operation Possibility to adjust the numbering machine’s position relative to the sheet from the control panel Weight: 160 kg Power supply: 230 V The set includes two numbering machines, an instruction manual, and tools. Pgodpfx Alozdaykshen