Used Homag Fl 67/25/11+500 for sale (41,093)

Condition: ready for operation (used), Heidenhain UM 114 ID 325005-01. The costs cover only the repair analysis of your component, which you can send to us. After assessment of your component, you will receive a quotation with the actual repair costs. If you approve the repair, the analysis costs will be waived. Your component will be fully overhauled during the repair and comes with a 3-month warranty from us. Hjdpey Nrblofx Afhor

Condition: ready for operation (used), Heidenhain UM 114 ID 325005-12 The costs cover only the repair analysis of your component, which you can send to us. After inspection of your component, you will receive a quotation detailing the actual repair costs. If you approve the repair, the analysis costs will be waived. As part of the repair, your component will be fully overhauled and we provide a 3-month warranty. Hjdpjy Nrbxefx Afhsr

Condition: ready for operation (used), SMW Autoblok SRG 1 C grinding steady rest ID 225020 SN 1582110103 ,used, good condition, 100% working, scope of delivery as per photos Hedsxah Dhjpfx Afhsr

Condition: ready for operation (used), Heidenhain ROD 250 6000 . 213 116 54 S.Nr. 3 968 067 D, cable length 1 meter, used, with minor signs of wear, 100% functional. Delivery scope as per photos. Hedex Er Rxepfx Afhsr

Condition: ready for operation (used), Heidenhain ROD 250-18000 rotary encoder ID: 213 116 45 SN: 4556768E – cable length: 1m, used, in good condition, fully functional, delivery scope as per photos Hedpfjx Er R Eex Afher

Condition: ready for operation (used), Kontron CP6500-V / 31.251-1010.1/L01 control unit / CPU SN: 252935022, used, good condition, 100% functional, scope of delivery as per photos Hedpfxsx Et Dmo Afher

Condition: ready for operation (used), Heidenhain UM 114 ID 325 005-12 SN15147342, professionally fully overhauled and tested with a 3-month warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange process, your defective unit must not show any mechanical damage such as breakage, as these cannot be repaired. In such cases, an additional charge of €1,000 incl. VAT will apply. Attention: You are bidding on a Heidenhain inverter, model UM 114 ID 325 005-12 SN15147342, offered as an exchange service, professionally completely overhauled and tested with a 3-month warranty, 100% functional, scope of delivery as per photos. With both repair and exchange services, your returned defective part must not exhibit mechanical damages, such as fractures, since these are no longer repairable. In that case, a subsequent invoice for €1,000 incl. VAT will be issued. Hedpfxex Dwyys Afhsr

Condition: ready for operation (used), Fanuc A05B-2453-B250 control SN E05506713 R-J3IB 380-415 / 440-500VAC, used, heavy signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hjdpjrz Dg Defx Afhjr

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UM 113 . 325 002-01 SN: 8115060 in an exchange service. The unit has been professionally overhauled and fully tested, with a 3-month warranty and is 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective core unit must not have any mechanical damage such as fractures, as these are irreparable. In such cases, an additional charge of €500 incl. VAT will apply. Hjdpfxex Etbxo Afher

Condition: ready for operation (used), Heidenhain RON 255 rotary encoder ID no.: 263 635 01 SN: 5674119A, used, in as-new condition, 100% functional, scope of delivery as per photos. Hjdpfx Asy Nqttofhjr

Condition: ready for operation (used), Heidenhain UM 111 ID 325000-02. The cost covers only the repair analysis of your component, which you can send to us. After the inspection of your component, you will receive a quotation detailing the actual repair costs. Once you authorize the repair, the analysis fee will be waived. As part of the repair process, your component will be completely overhauled and comes with a 3-month warranty provided by us. Hedsy Nq R Sjpfx Afher

Condition: ready for operation (used), Heidenhain UM 112D ID 325001-02 The costs cover only the repair analysis of your component, which you can send to us. After the assessment of your component, you will receive a quotation with the actual repair costs. If you approve the repair, the analysis costs will be waived. During the repair process, your component will undergo a complete overhaul and will be covered by a 3-month warranty from us. Hsdpfx Afjy Nq Udeher

Condition: ready for operation (used), Heidenhain UM 113 Id.325 002-03 SN: 14934810 - with test report, professionally and completely overhauled and tested, includes a 6-month warranty, 100% functional, scope of delivery as per photos. Note: In the exchange procedure, your defective core unit must not have any mechanical damage such as cracks or breaks, as these cannot be repaired. In such cases, an additional charge of €1,000 incl. VAT will be invoiced. Attention: You are bidding on a Heidenhain UM 113 ID 325 002-03 SN14934810 inverter on an exchange basis (exchange service), professionally overhauled and tested with a 6-month warranty, 100% functional, scope of supply as shown in the photos. In both repair and exchange procedures, your defective part must be free from mechanical damage such as breakage, as these are not repairable. If such damage is present, a subsequent invoice of €1,000 incl. VAT will be issued. Hsdpfx Afoy Nq Uwehor

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 800 mm, turning length: 4,400 mm, turning diameter: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 25 rpm, spindle motor power: 24,000 W, rotational speed (min.): 25 rpm, rotational speed (max.): 1,200 rpm, total height: 2,150 mm, total length: 8,300 mm, total width: 2,350 mm, swing diameter over cross slide: 800 mm, turning diameter over bed slide: 1,100 mm, type of input current: three-phase, overall weight: 12,000 kg, swing diameter over bed slide: 1,100 mm, chuck outer diameter: 800 mm, We offer this new, unused CNC lathe CK61125X5000, manufactured in 2025. The lathe is prepared for transport. Control system: Sinumerik 828 D-26 10.4" Sinumerik EES 6FC5800-0AP75-0YB0 Sinumerik Transmit 6FC5800-0AS50-0YB0 HPMA Renishaw measuring probe Siemens 24 KW S1 spindle motor Rigid threading Hydraulic tailstock Electrically adjustable tailstock Remote control for the lathe Powered tools VDI 50 Automatic gearbox, two speeds Gearbox cooling unit Separate central lubrication system for the Z and X axes 20 BAR cooling Chip conveyor Oil mist extractor Oil skimmer Full protective guard Hjdpfx Afozfxv Ejhor Control cabinet with temperature monitoring Additional equipment: 800 self-centering chuck 400 self-centering chuck 325 self-centering chuck, mounted in the tailstock 800 independent jaw chuck 400 independent jaw chuck Additional soft and hard jaws included Straight VDI 50 powered tool holder Angled VDI 50 powered tool holder 600-1000 steady rest 200-600 steady rest 60-350 steady rest Tool holder for deep boring, diameter 100 mm, with the possibility of reaming to a larger diameter Leveling feet Model: CK61125X5000 Serial number: 251295 Year of manufacture: 2025 Power supply: 3x400V/50Hz Power: 42 kW Protection class: IP54 Maximum turning length: 4400 mm Maximum turning diameter over the cross slide: 800 mm Maximum turning diameter over the bed: 1100 mm Spindle speed: 25–1200 rpm Dimensions: 8300×2350×2150 mm Weight: 12 t Sound power level LwA: 87 dB If you have any questions or require further information, please send a message or contact us by phone.

Year of construction: 2006, condition: used, edge thickness (max.): 12 mm, feed rate X-axis: 40 m/min, plate height: 60 mm, plate length: 2,400 mm, plate width: 1,000 mm, machine/vehicle number: 0-202-48-1184, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The machine package consists of four machines, composed as follows: Pos. 1 - KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Pos. 2 - HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Adhesive system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling cutter Corner rounding unit Grooving unit Pressing system Panel support guides Positioning via NC Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically timed engagement Positioning via NC unit Unit 2: Double cutter, top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically timed engagement Positioning via NC Gluing and edge system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel side Edge processing units Number of edge processing units: 8 Edge processing unit 1: Trimming unit Number of motors: 2 Positioning via NC Edge processing unit 2: Rough milling, top and bottom Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius milling Number of motors: 2 Positioning via NC Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change Positioning via NC Edge processing unit 5: Milling/chipping unit Number of motors: 1 Motor power Unit 5: 12 kW Speed Unit 5: 10,000 rpm Automatic tool change Positioning via NC Edge processing unit 6: Edge smoothing blade Positioning via NC Edge processing unit 7: Glue application blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Hedpjy Ur Hlofx Afhsr Barcode reader model: DATALOGIC Pos. 3 - KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Pos. 4 - LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return system for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8522

Condition: as good as new (ex-display), DES190 + MSM031C-0300-NN-M0-CH0, Zimmer-Group, AC servo motor and rotary module Model: AI00367288 + R911325139 Type: DES190 + MSM031C-0300-NN-M0-CH0 Hsdpfx Afevrf D Hoher Condition: As good as new

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 34.3 kW (46.63 HP), input voltage: 460 V, input frequency: 50 Hz, input current: 43 A, type of input current: AC, Performance data & key technical specifications (derived): WHU 2500 nominal throughput approximately 430 m³/h (at 50 Hz) for the WH/WHU 2500 version. Inlet flange DN 250 ISO-K, outlet flange DN 100 ISO-K on WHU 2500. Water cooling of the motor/system. DV650S: Nominal suction capacity 650 m³/h at around 5×10⁻³ mbar ultimate vacuum. Hsdox Aqa Dopfx Afher

Condition: excellent (used), Year of construction: 2013, operating hours: 55,200 h, functionality: fully functional, machine/vehicle number: A0035A0294, Machine type: TruPunch 3000-1300 (S11) TruPunch 3000-1300 (S11), medium format 1250/2500 We are the first and only owner of the machine. Machine with complete history and service documentation. Machine is in fully working order and in continuous operation. Technical data: Width 6500 mm Depth 6203 mm Height 2252 mm Max. punching sequence (E = 1 mm) 1000 1/min Max. punching sequence – marking 2500 1/min Punching mode, X-axis 2500 mm Punching mode, Y-axis 1250 mm Max. sheet thickness 6.4 mm Max. workpiece weight 160 kg Max. punching force 180 kN Multitool tool change time 0.3 sec Number of tools/sheet clamps | 18 pcs / 2 pcs Max. part size, part flap when punching 500 mm x 500 mm Max. part size, rigid slide for punching (with sliding table) 80 mm x 50 mm Average power consumption with active automatic shutdown 0.3 kW Average power consumption during production 5.6 kW Additional, non-standard machine equipment: Hjdpozd U D Nsfx Afhor 1) Thread forming function with thread counter and thread forming tool damage control: chip-free thread forming is possible in both structural steel and stainless steel and aluminum. The threading tool is mounted like all other tools in the head. Thread size to be machined ranges from M 2.5 to M10. A thread sensor enables control of the threading tool damage. User-friendly operation, including lubricant level control. 2) Marking/surface embossing function: fast marking using appropriate tools. High-quality knurling can be performed at high speed. 3) Lowerable die: the lowerable die enables scratch-free processing because it moves downward when positioning the sheet metal. 4) Additional clamping device: recommended for processing very thin sheets and when using roller tool machining technology. An additional 2 clamping devices can be installed. In combination with the SheetMaster Compact, a third clamping device is recommended. 5) 3 x Option - vertically movable clamping device: the clamping devices move vertically (maximum stroke 12 mm); enables direct processing of the sheet metal at the clamping devices. This option reduces scratches from high forming dies. 6) Sensor in the slide for small parts: control of the slide for small parts (included in the "Nibbling-free machining" option). 7) Second locating pin: the pin is located on the outside on the right side. 8) RTC tool cassettes: 17 tool cassettes with die plates, enabling quick machine retooling. 9) Brush table with unloading and loading assistance: a brush table is recommended for processing particularly delicate materials. Vertically moving balls embedded in the table facilitate the loading and unloading process. We invite you to contact us.

Condition: good (used), Technical data for the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in the scope of supply: 1x CS Sigma profile, used Material color: sendzimir galvanized Hsdoidchcepfx Afhsr Overall length: approx. 5,500 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Condition: new, The scope of delivery includes: 25x new leveling plates Suitable for manufacturer: Mecalux Material color: Sendzimir galvanized For frame profile: P 101 Material thickness: 1.00 mm Total width: 155 mm Total depth: 110 mm Hole diameter: 15 mm Number of holes: 2 Weight | Unit: 0.130 kg Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Hsdpfx Aowa Npzofher Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 2014, No. 01 Homag Weeke machining center Mod. BMG 111/45/12/K Usable working area with electrospindle 4500 x 1550 mm Usable working area with all units 4500 x 1250 mm Boring head with 12 vertical spindles and 4 + 2 horizontal spindles, saw unit 0/90 Electrospindle 9 kW 12 Hp HSK, rotation speed from 1250 to 24000 rpm 4th axis for aggregate rotation 8-position circular tool changer 8-position lateral tool changer Lateral pick-up tool changer Special FLEX 5 HIGH PERFORMANCE unit for drilling, milling, cutting Hsdeyarwtopfx Afher Automatic tilt adjustment 0 – 100 degrees Chip conveyor discharge to the right 8 Schmalz work tables, 16 suction cups Suction cup positioning laser 2 vacuum pumps POWERTOUCH control system Woodwop dxf import Teleservicenet assistance CE compliant Year 2014

Condition: used, machine/vehicle number: 16858, Year of construction: 2018, load capacity: 2,000 kg, lifting height: 150 mm, construction height: 1,500 mm, fork length: 2,500 mm, overall weight: 139 kg, enginetype: None, manufacturer: Schefer Hodpfx Aeyi Naqefhor

Condition: used, OMNIFLO Overhead conveyor system Linear guide Transport Schönenberger Complete system for hanging goods RA1994 Manufacturer: Schönenberger Various components available: Straight sections can be optionally shortened: 1 pcs. x 1.00m 1 pcs. x 1.18m 1 pcs. x 1.52m 1 pcs. x 1.54m 1 pcs. x 1.54m 1 pcs. x 1.74m 6 pcs. x 1.80m 1 pcs. x 1.84m 1 pcs. x 2.05m 1 pcs. x 2.25m 7 pcs. x 2.28m 1 pcs. x 2.46m 2 pcs. x 2.50m 1 pcs. x 2.50m 1 pcs. x 2.60m 1 pcs. x 2.79m 5 pcs. x 3.00m 1 pcs. x 3.00m 1 pcs. x 3.34m 1 pcs. x 3.50m 4 pcs. x 3.64m 1 pcs. x 3.66m 1 pcs. x 3.70m 1 pcs. x 4.00m 1 pcs. x 4.00m 1 pcs. x 4.14m 1 pcs. x 4.26m 1 pcs. x 4.54m 1 pcs. x 4.57m 1 pcs. x 4.64m 1 pcs. x 4.72m 1 pcs. x 4.76m 1 pcs. x 4.87m 1 pcs. x 4.97m 2 pcs. x 5.00m 15 pcs. x 5.00m 1 pcs. x 5.06m 1 pcs. x 5.14m 1 pcs. x 5.14m 1 pcs. x 5.41m 1 pcs. x 5.59m 16 pcs. x 6.00m Turnouts: Left 14 and right 26 Curves: in various angles and radi: 30 pcs. Climbing drives: 2 pcs. Horizontal drives with matching curves: 2 pcs. The displayed price is not the total price, it is the product price Optionally available: Supports Hsdpfx Afevmqckjhjr Side guides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Just contact us by phone or by mail. Our complete product range can also be found on our website with customized filter option We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2013, operating hours: 3,000 h, 5-axis CNC portal machine; Console table with 6 movable consoles, each with 2 suction cups, side and longitudinal stops, LED position display for vacuum suction cups Venture 316 Future Package 10 extraction rails, Power-Clamp connection, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece length: All units, single operation: 3300 mm; pendulum operation: max. 1740 mm Tool diameter 25 mm: single operation: 3475 mm; pendulum operation: max. 1915 mm – Workpiece width: Front stop: 950 mm all units / 1050 mm with tool diameter 25 mm Rear stop: up to 1400 mm / 1550 mm – Workpiece thickness: – Max. 250 mm including clamping devices – Up to max. 60 mm with standard clamps SAFETY AND PROTECTIVE EQUIPMENT: EC-compliant; Safety enclosure on the right with door Left and rear: wall installation! Equipment: 10 kW Drive5C spindle and 14-position tool changer (carousel) + 9-position linear changer (side mounted) Drilling head with 16 spindles (V12/H4/S0/90°) DRIVE5C+ interface for aggregates Tool length measuring probe Software for position measurement and CNC coordinate rotation Tool transfer station Coolant tank for processing spindle Vacuum pump 300/360 m3/h Powerclamp pneumatic package Control system: POWERCONTROL PC85 with POWERTOUCH system; IPC POWERPACK Hodpfx Afjy E Npfohsr Operator terminal for program start; camera system with tablet PC WOODWOP CAD/CAM standard interface Documentation and control texts: German Delivery includes only the tools and HSK tool holders shown in the images!

Condition: used, Year of construction: 2005, machine/vehicle number: 0-201-10-2035, functionality: fully functional, operating hours: 31,690 h, table load: 500 kg, Main technical data: Model: BOF 611 / 34 / 13 / 2R — CNC machining center with 3 working axes Spindle power: 15 kW, HSK 63 system Working dimensions: X axis: 3,740 mm (single table mode) / 1,830 mm (pendulum operation) Y axis: 1,550 mm Z axis: 300 mm Material feeding options: - Gantry feeder (HOMAG OPTIMAT) - Double work table — allows alternate or parallel operation Additional features: Tool changer: 12 positions Control and software: Flex5 interface and WoodWOP (e.g., version 6.0) for CNC programming Weight and construction: Weight: approx. 25,000 lb (~11,340 kg) Dual matrix table system (each 5 × 6 ft) Summary: The HOMAG Optimat BOF 611 is an advanced CNC machining center for woodworking, equipped with a powerful 15 kW HSK 63 spindle and three controlled axes. Ideal for precise milling, drilling, and large-format workpiece machining, with automated feeder (not included) and a dual table system for increased productivity. Buyer requirements: - Dismantle and prepare the machine for transport - Load the machine onto a truck - Arrange transportation from the seller’s location to the buyer’s location - Organize transport insurance if required Hsdpfew Ilvfjx Afher The machine can be viewed under power/in current (working) conditions. It is still in daily use. For visits or a video call, please contact us.